九州大学 研究者情報
論文一覧
堀田 善治(ほりた ぜんじ) データ更新日:2017.05.30

教授 /  工学研究院 材料工学部門 材料加工工学講座


原著論文
1. P.Chen, M.Ashida, H.Doi, Y.Tsutsumi, Z.Horita, T.Hanawa, Cytocompatibility of Ti–6Al–7Nb through High-Pressure Torsion Processing, Materials Transactions, 57, 2020-2025, 2016.12.
2. M.Mito, H.Matsui, K.Tsuruta, T.Yamaguchi, K.Nakamura, H.Deguchi, N.Shirakawa, H.Adachi, T.Yamasaki, H.Iwaoka, Y.Ikoma, Z.Horita, Large enhancement of superconducting transition temperature in single-element superconducting rhenium by shear strain, Scientific Report, 6, 36337, 2016.11.
3. M.Isik, M.Niinomi, H.Liu, K.Cho, M.Nakai, Z.Horita, T.Narushima, K.Ueda, Optimization of Microstructure and Mechanical Properties of Co–Cr–Mo Alloys by High-Pressure Torsion and Subsequent Short Annealing, Materials Transactions, 11, 1887-1896, 2016.11.
4. H.Razavi-Khosroshahi, K.Edalati, M.Arita, Z.Horita, M.Fujii, Plastic Strain and Grain Size Effect on Phase Transformations in TiO2 Ceramics Processed by high-pressure Torsion, Scripta Materialia, 124, 59-62, 2016.11.
5. K.Edalati, M.Matsuo, H.Emami, S.Itano, A.Alhamidi, A.Staykov, D.J.Smith, S.Orimo, E.Akiba, Z.Horita, Impact of severe plastic deformation on microstructure and hydrogen storage of titanium-iron-manganese intermetallics, Scripta Materialia, 124, 108-111, 2016.11.
6. H.Yuan, M.H.Tsai, G.Sha, F.Liu, Z.Horita, Y.T.Zhu, J.T.Wang, Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation, J. Alloys and Compounds, 686, 15-23, 2016.11.
7. 増田 高大, 瀧沢 陽一, 湯本 学, 小田切 吉治, 堀田 善治, 高圧スライド(HPS)加工で結晶粒微細化したA2024合金板材の超高強度化と超塑性の発現, 日本金属学会誌, 80, 9, 593-601, 2016.09.
8. Y.Takizawa, T.Masuda, K.Fujimitsu, T.Kajita, K.Watanabe, M.Yumoto, Y.Otagiri, Z.Horita, Scaling up of High-Pressure Sliding (HPS) for Grain Refinement and Superplasticity, Metallurgical and Materials Transactions A, 47, 4669-4681, 2016.09.
9. P.Kral, J.Dvorak, A.Jager, M.Kvapilova, Z.Horita, V.Sklenicka, Creep properties of aluminium processed by ECAP, Kovove Mater., 54, 441-451, 2016.08.
10. R.Z.Valiev, Y.Estrin, Z.Horita, T.G.Langdon, M.J.Zehetbauer, Y.T.Zhu, Fundamentals of Superior Properties in Bulk NanoSPD Materials, Material Research Letters, 4, 1-21, 2016.07.
11. M.Isik, M.Niinomi, H.Liu, K.Cho, M.Nakai, Z.Horita, S.Sato, T.Narushima, H.Yilmazer, M.Nagasako, Grain Refinement Mechanism and Evolution of Dislocation Structure of Co–Cr–Mo Alloy Subjected to High-Pressure Torsion, Materials Transactions, 57, 1109-1118, 2016.07.
12. H.Razavi-Khosroshahi, K.Edalati, M.Hirayama, H.Emami, M.Arita, M.Yamauchi, S.Ida, T.Ishihara, E.Akiba, Z.Horita, M.Fujii, Visible-Light-Driven Photocatalytic Hydrogen Generation on Nanosized TiO2-II Stabilized by High-Pressure Torsion, ACS Catalysis, 6, 8, 5103-5107, 2016.06.
13. K.Edalati, H.Shao, H.Emami, H.Iwaoka, E.Akiba, Z.Horita, Activation of titanium-vanadium alloy for hydrogen storage by introduction of nanograins and edge dislocations using high-pressure torsion, International Journal of Hydrogen Energy, 41, 8917-8924, 2016.06.
14. Y.Mine, D.Haraguchi, T.Ideguchi, N.Horita, Z.Horita, K.Takashima, Hydrogen embrittlement of ultrafine-grained austenitic stainless steels processed by high-pressure torsion at moderate temperature, Iron and Steel International Japan, 56, 6, 1083-1090, 2016.04.
15. I.F.Mohamed, S.Lee, Z.Horita, K.EDALATI, S.Abdullah, M.Z.Omar, W.F.H.W.Zamri, Grain refinement and microstructure evolution in aluminum A2618 alloy by high-pressure torsion, Jurnal Teknologi, 78, 149-152, 2016.04.
16. K.Edalati, H.Emami, Y.Ikeda, H.Iwaoka, I.Tanaka, E.Akiba, Z.Horita, New Nanostructured Phases with Reversible Hydrogen Storage Capability in Immiscible Magnesium-Zirconium System Produced by High-Pressure Torsion, Acta Materialia, 108, 293-303, 2016.04.
17. H.Iwaoka, M.Arita, Z.Horita, Hydrogen Diffusion in Ultrafine-Grained Palladium: Roles of Dislocations and Grain boundaries, Acta Materialia, 107, 168-177, 2016.04.
18. K.Edalati, D.J.Lee, T.Nagaoka, M.Arita, H.S.Kim, Z.Horita, R.Pippan, Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations, Materials Transactions, 57, 533-538, 2016.04.
19. F.Zhang, R.Yonemoto, M.Arita, Z.Horita, Hydrogen generation from pure water using Al-Sn powders consolidated through high-pressure torsion, Journal of Materials Reseach, 31, 775-782, 2016.03.
20. Y.Mine, K.Koga, K.Takashima, Z.Horita, Mechanical characterisation of microstructural evolution in 304 stainless steel subjected to high-pressure torsion with and without hydrogen pre-charging, Materials Science and Engineering A, 661, 87-95, 2016.03.
21. R.Z.Valiev, Y.Estrin, Z.Horita, T.G.Langdon, M.J.Zehetbauer, Y.T.Zhu, Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later, JOM, 68, 1216-1226, 2016.03.
22. 廣澤 渉一, 唐 永鵬, 堀田 善治, 松田 健二, 李 昇原, 寺田 大将, アルミニウム合金の超微細粒強化と時効析出強化を並立させる3つの方策, まてりあ, 55, 2, 45-52, 2016.02.
23. 増田 高大, 藤光 利茂, 瀧沢 陽一, 堀田 善治, AZ61合金丸棒材の高圧スライド(HPS)加工による結晶粒超微細化と超塑性, 日本金属学会誌, 80, 2, 128-133, 2016.02.
24. H.Emami, K.Edalati, A.Staykov, T.Hongo, H.Iwaoka, Z.Horita, E.Akiba, Solid-state reactions and hydrogen storage in magnesium mixed with various elements by high-pressure torsion: experiments and first-principles calculations, Royal Society of Chemistry (RCS) Advances, 6, 11665-11674, 2016.01.
25. M.Isik, M.Niinomi, K.Cho, M.Nakai, H.Liu, H.Yilmazer, Z.Horita, T.Narushima, Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion, Journal of the Mechanical Behavior of Biomedical Materials, 59, 226-235, 2015.12.
26. K.EDALATI, Z.Horita, A Review on High-Pressure Torsion (HPT) from 1935 to 1988, Materials Science and Engineering A, 652, 325-352, 2015.11.
27. Yoshifumi Ikoma, Takamitsu Toyota, Yoshimasa Ejiri, Katsuhiko Saito, Qixin Guo, Zenji Horita, Allotropic phase transformation and photoluminescence of germanium nanograins processed by high-pressure torsion, Journal of Materials Science, 51, 1, 138-143, 2016.01.
28. Y.Takizawa, K.Otsuka, T.Masuda, T.Kajita, M.Yumoto, Y.Otakiri, Z.Horita, High-Strain Rate Superplasticity of Inconel 718 through Grain Refinement by High-Pressure Torsion, Materials Science and Engineering A, 648, 178-182, 2015.11.
29. K.Edalati, H.EMAMI, A.Staykov, D.J.Smith, E.Akiba, Z.Horita, Formation of Metastable Phases in Magnesium-Titanium System by High-Pressure Torsion and Their Hydrogen Storage Performance, Acta Materialia, 99, 150-156, 2015.10.
30. Z.Horita, Severe Plastic Deformation under High Pressure for Production of Superplastic Materials, Materials Science Forum, 838-839, 287-293, 2015.09.
31. C.Borchers, C.Garve, M.Tiegel, M.Deutges, A.Herz, K.Edalati, R.Pippan, Z.Horita, R.Kirchheim, Nanocrystalline steel obtained by Mechanical alloying of iron and graphite subsequently compacted by high-pressure torsion, Acta Materialia, 97, 207-215, 2015.09.
32. K.Edalati, M.Arimura, Y.Ikoma, T.Daio, M.Miyata, D.J.Smith, Z.Horita, Plastic Deformation of BaTiO3 Ceramics by High-Pressure Torsion and Changes in Phase Transformations, Changes in Optical and Dielectric Properties, Material Research Letters, 3, 216-221, 2015.07.
33. 増田 高大, 藤光 利茂, 瀧沢 陽一, 堀田 善治, 高圧スライド(HPS)加工によるA2024丸棒材の結晶粒超微細化と超塑性, 軽金属, 65, 319-325, 2015.08.
34. T.Masuda, K.Fujimitsu, Y.Takizawa, Z.Horita, High-Pressure Sliding Using Rod Samples for Grain Refinement and Superplasticity in Al and Mg Alloys, Letters on Materials, 5, 258-263, 2015.08.
35. K.Edalati, T.Furuta, T.Daio, S.Kuramoto, Z.Horita, High Strength and High Uniform Ductility in a Severely Deformed Fe-Ni-Al-C Alloy by Lattice Softening and Multimodal-structure Formation, Material Research Letters, 3, 197-202, 2015.05.
36. Y.Mine, D.Haraguchi, Z.Horita, K.Takashima, High-pressure torsion of metastable austenitic stainless steel at moderate temperatures, Philosophical Magazine Letters, 95, 269-276, 2015.06.
37. H.Iwaoka, Z.Horita, High-pressure torsion of thick Cu and Al–Mg–Sc ring samples, Journal of Materials Science, 50, 4888-4897, 2015.07.
38. M.Ashida, P.Chen, H.Doi, Y.Tsutsumi, T.Hanawa, Z.Horita, Superplasticity in Ti-6Al-7Nb alloy processed by high-pressure torsion, Materials Science and Engineering A, 640, 449-453, 2015.07.
39. H.Matsunoshita, K.Edalati, M.Furui, Z.Horita, Ultrafine-Grained magnesium-lithium alloy processed by high-pressure torsion: Low-temperature superplasticity and potential for hydroforming, Materials Science and Engineering A, 640, 443-448, 2015.07.
40. T.Hongo, K.Edalati, M.Arita, J.Matsuda, E.Akiba, Z.Horita, Significance of Grain Boundaries and Stacking Faults on Hydrogen Storage Properties of Mg2Ni Intermetallics Processed by High-Pressure Torsion, Acta Materialia, 92, 46-54, 2015.06.
41. J.M.Cubero-Sesin, Z.Horita, Age Hardening in Ultrafine-grained Al-2%Fe Alloy Processed by High-Pressure Torsion, Metallurgical Materials Transactions A, 46, 2614-2624, 2015.06.
42. I.F.Mohamed, S.Lee, K.Edalati, Z.Horita, S.Hirosawa, K.Matsuda, D.Terada, Aging behavior of Al 6061 alloy processed by high-pressure torsion and subsequent aging, Metallurgical Materials Transactions A, 46, 2664-2673, 2015.06.
43. H.Emami, K.Edalati, J.Matsuda, E.Akiba, Z.Horita, Hydrogen Storage Performance of TiFe after Processing by Ball Milling, Acta Materialia, 88, 190-195, 2015.04.
44. I.F.Mohamed, Y.Yonenaga, S.Lee, K.EDALATI, Z.Horita, Age Hardening and Thermal Stability of Al-Cu Alloy Processed by High-Pressure Torsion, Materials Science and Engineering A, 627, 111-118, 2015.03.
45. Jorge M. Cubero-Sesin, Makoto ARITA, Zenji Horita, High Strength and Electrical Conductivity of Al-Fe alloys produced by synergistic combination of High-Pressure Torsion and Aging, Advanced Engineering Materials, 17, 1792-1803, 2015.12.
46. S. Lee, K. Tazoe, I. F. Mohamed, Zenji Horita, Strengthening of AA7075 alloy by processing with high-pressure sliding (HPS) and subsequent aging, Materials Science and Engineering A, 628, 56-61, 2015.03.
47. A. Alhamidi, Zenji Horita, Grain refinement and high strain rate superplasticity in aluminum 2024 alloy processed by high-pressure torsion, Materials Science and Engineering A, 622, 139-145, 2015.01.
48. T. Hongo, EDALATI KAVEH, Hideaki Iwaoka, Makoto ARITA, Junko Matsuda, Etsuo Akiba, Zenji Horita, High-Pressure Torsion of Palladium: Hydrogen-Induced Softening and Plasticity in Ultrafine Grains and Hydrogen-Induced Hardening and Embrittlement in Coarse Grains, Materials Science and Engineering A, 618, 1-8, 2014.12.
49. EDALATI KAVEH, Junko Matsuda, A. Yanagida,, Etsuo Akiba, Zenji Horita, Activation of TiFe for hydrogen storage by plastic deformation using groove rolling and high-pressure torsion: similarities and differences
, International Journal of Hydrogen Energy, 39, 15589-15594, 2014.12.
50. EDALATI KAVEH, T. Daio, S. Lee, Zenji Horita, T. Nishizaki,, T. Akune, T. Nojima, T. Sasaki, High strength and superconductivity in nanostructured niobium-titanium alloy by high-pressure torsion and annealing: Significance of elemental decomposition and
supersaturation, Acta Materialia, 80, 149-158, 2014.11.
51. S.Lee, EDALATI KAVEH, Hideaki Iwaoka, Zenji Horita, T. Ohtsuki, T. Ohkochi, M. Kotsugi, T. Kojima, M. Mizuguchi, K. Takanashi, Formation of FeNi with L10-ordered structure using high-pressure torsion, Philosophical Magazine Letters, 94, 639-646, 2014.11.
52. S. Harish, M. Tabara, Yoshifumi Ikoma, Zenji Horita, Y. Takata, D. G. Cahill, M. Kohno, Thermal conductivity reduction of crystalline silicon by high-pressure torsion, Nanoscale Research Letters, 9, 326, 2014.11.
53. EDALATI KAVEH, CUBERO SESIN JORGE MAURICIO, A. Alhamidi, I. F. Mohamed, Zenji Horita, Influence of severe plastic deformation at cryogenic temperature on grain refinement and softening of puremetals:Investigation using high-pressure torsion
, Materials Science and EngineeringA, 613, 103-110, 2014.11.
54. A. Alhamidi, EDALATI KAVEH, Zenji Horita, S. Hirosawa, K. Matsuda, D. Terada, Softening by severe plastic deformation and hardening by annealing of aluminum–zinc alloy: Significance of elemental and spinodal decompositions
, Materials Science and EngineeringA, 610, 17-27, 2014.11.
55. A. Alhamidi, Zenji Horita, Application of high-pressure torsion to Al-6%Cu-0.4%Zr alloy for ultrafine-grain refinement and superplasticity
, Journal of Materials Science, 49, 6689-6695, 2014.09.
56. Yoshifumi Ikoma, K. Hayano, EDALATI KAVEH, K. Saito, Q. Guo, Zenji Horita, T. Aoki, D. J. Smith, Fabrication of nanograined silicon by high-pressure torsion, Journal of Materials Science, 49, 6565-6569, 2014.09.
57. CUBERO SESIN JORGE MAURICIO, H. In, Makoto ARITA, Hideaki Iwaoka, Zenji Horita, High-pressure torsion for fabrication of high-strength and high-electrical conductivity Al micro-wires
, Journal of Materials Science, 49, 6550-6557, 2014.09.
58. Akama Daichi, S. Lee, Zenji Horita, K. Matsuda, S. Hirosawa, Aging behavior of Ultrafine-Grained Al-Mg-Si-X(X=Cu, Ag, Pt, Pd)Alloys Processed by High-Pressure Torsion
, Materials Transactions, 55, 640-645, 2014.09.
59. EDALATI KAVEH, Akama Daichi, A. Nishio, S. Lee, Y. Yonenaga, CUBERO SESIN JORGE MAURICIO, Zenji Horita, Influence of dislocation-solute atom interactions and stacking fault energy on grain size of single-phase alloys after high-pressure torsion
, Acta Materialia, 69, 68-77, 2014.09.
60. EDALATI KAVEH, T. Daio, Makoto ARITA, S. Lee, Zenji Horita, A. Togo, I. Tanaka, High-pressure torsion of titanium: Grain size effect on allotropic phase transformations at room and cryogenic temperatures
, Acta Materialia, 68, 207-213, 2014.06.
61. S. Lee, H. Matsunaga, X. Sauvage, Zenji Horita, Strengthening of Cu-Ni-Si Alloy Using High-Pressure Torsion and Aging, Materials Characterization, 90, 62-70, 2014.06.
62. A. Alhamidi, EDALATI KAVEH, Hideaki Iwaoka, Zenji Horita, Effect of temperature on solid-state formation of bulk nanograined intermetallic Al3Ni during high-pressure torsion
, Philosophical Magazine, 94, 876-887, 2014.06.
63. A.Deschamps, F.De Geuser, Zenji Horita, S.Lee, G.Renou, Precipitation kinetics in a severely plastically deformed 7075 Aluminium alloy, Acta Materialia, 66, 105-117, 2014.02.
64. EDALATI KAVEH, M.Ashida, Zenji Horita, T.Matsui, H.Kato, Wear Resistance and Tribological Features of Pure Aluminum and Al-Al2O3 Composites Consolidated by High-Pressure Torsion, Wear, 310, 83-89, 2014.02.
65. Yoshifumi Ikoma, Y.Ejiri, K.Hayano, K.Saito, Q.Guo, Zenji Horita, Nanograin formation of GaAs by high-pressure torsion, Philosophical Magazine Letters, 94, 1-8, 2014.02.
66. H.Iwaoka, Zenji Horita, Hydrogen Behavior in Ultrafine-Grained Palladium Processed by High-Pressure Torsion, International Journal of Hydrogen Energy, 38, 14879-14886, 2013.11.
67. K.Watanabe, S.Maruno, K.Matsuda, S.Lee, Zenji Horita, D.Terada, S.Saikawa, S.Hirosawa, Aging behavior and microstructure of aged excess Mg type Al–Mg–Si alloys after HPT processing, J. Japan Inst. Light Metals, 63, 406-412, 2013.11.
68. T. Ohtsuki, M. Kotsugi, T. Ohkochi, S. Lee, Zenji Horita, K. Takanashi, Nanoscale characterization of FeNi alloys processed by high-pressure torsion using photoelectron emission microscope, Journal of Applied Physics, 114, 143905, 1-5, 2013.11.
69. EDALATI KAVEH, J.Matsuda, Makoto ARITA, T.Daio, Etsuo Akiba, Zenji Horita, Mechanism of activation of TiFe intermetallics for hydrogen storage by severe plastic deformation using high-pressure torsion, Applied Physics Letters, 103, 143902, 1-4, 2013.11.
70. EDALATI KAVEH, T.Daio, Yoshifumi Ikoma, Makoto ARITA, Zenji Horita, Graphite to diamond-like carbon phase transformation by high-pressure torsion, Applied Physics Letters, 103, 034108, 1-4, 2013.11.
71. Y.B.Wang, X.Z.Liao, Y.H.Zhao, J.C.Cooley, Zenji Horita, Y.T.Zhu, Elemental segregation in nanocrystalline Cu-Al alloys induced by severe plastic deformation, Applied Physics Letters, 102(23), 231912, 1-4, 2013.11.
72. Y.Z.Guo, N.A.Behm, J.P.Ligda, Y.L.Li, Z.Pan, Zenji Horita, Q.Wei, Critical issue related to instrumented indentation on non-uniform materials:Application to niobium subjected to high pressure torsion
, Materials Science and Engineering A, 586, 149-159, 2013.09.
73. H.NAKANO, H.Yamaguchi, Y.Yamada, S.Oue, I.Son, Zenji Horita, H. Koga, Effects of High-Pressure Torsion on the Pitting Corrosion Resistance of Aluminum-Iron Alloys
, Materials Transactions, 54, 1642-1649, 2013.09.
74. T. Ishibashi, Y. Tomota, S. Sugaya, H. Toyokawa, T. Hirade, Zenji Horita, H. Suzuki, Bulky Averaged Microscopic Information for ECAP-Processed Cu Using Accelerator-Based Gamma-Ray-Induced Positron Annihilation Spectroscopy and Neutron Diffraction
, Materials Transactions, 54, 1562-1569, 2013.09.
75. EDALATI KAVEH, H. Iwaoka, S. Toh, K. Sasaki, Zenji Horita, Application of high-pressure torsion to WC-Co ceramic-based composites for consolidation and improvement of microstructure and hardness, Materials Transactions, 54, 1540-1548, 2013.09.
76. EDALATI KAVEH, S.Toh, Makoto ARITA, M. Watanabe, Zenji Horita, High-pressure torsion of pure cobalt: hcp-fcc phase transformation and twinning during severe plastic deformation, Applied Physics Letters, 102, 181902, 1-4, 2013.09.
77. T. Nishizaki, S. Lee, Zenji Horita, T.Sasaki, N. Kobayashi, Superconducting Properties in Bulk Nanostructured Niobium Prepared by High-Pressure Torsion
, Physica C, 493, 132-136, 2013.06.
78. S.Kuramoto, N. Nagasako, T.Furuta, Zenji Horita, Strengthening the alloys with elastic softening in shear modulus C, Journal of Alloys and Compounds, 577S, S147-S150, 2013.06.
79. S.Hirosawa, T. Hamaoka, Zenji Horita, S.Lee, K.Matsuda, D.Terada, Methods for Designing Concurrently Strengthened Severely Deformed Age-Hardenable Aluminum Alloys by Ultrafine-Grained and recipitation Hardenings
, Metallurgical Materials Transactions, A, 44, 3921-3933, 2013.06.
80. K.Oh-ishi, EDALATI KAVEH, H. S. Kim, K.Hono, Zenji Horita, High-Pressure Torsion for Enhanced Atomic Diffusion and Promoting Solid-State Reactions in Aluminum-Copper System, Acta Materialia, 61, 3482-3489, 2013.06.
81. S.Lee, Zenji Horita, Enhancement of Strength and Ductility of Al-Ag Alloys processed by High-Pressure Torsion and Aging
, Metallurgical Materials Transactions, A, 44, 3221-3231, 2013.06.
82. A. Alhamidi, EDALATI KAVEH, Zenji Horita, Production of Nanograined Intermetallics Using High-Pressure Torsion, Materials Research - Ibero-American Journal of Materials, 16, 672-678, 2013.05.
83. EDALATI KAVEH, S.Toh, H. Iwaoka, Zenji Horita, K. Kishida, H. Inui, Evolution of lattice defects, nanostructure and disordered/ordered phase transformations in Ni-Al-Ti system by high-pressure torsion, Journal of Alloys and Compounds, 563, 221-228, 2013.05.
84. EDALATI KAVEH, 松田 潤子, Hideaki Iwaoka, S. Toh, Etsuo Akiba, Zenji Horita, High-pressure torsion of TiFe intermetallics: Activation for hydrogen storage at room temperature, heterogeneous nanostructure and ultrahigh hardness, International Journal of Hydrogen Energy, 38, 4622-4627, 2013.05.
85. EDALATI KAVEH, Zenji Horita, T.Furuta, S.Kuramoto, Dynamic Recrystallization and Recovery during High-Pressure Torsion: Experimental Evidence by Torque Measurement Using Ring Specimens, Materials Science and Engineering A, 559, 506-509, 2013.05.
86. CUBERO SESIN JORGE MAURICIO, Zenji Horita, Strengthening of Al through addition of Fe and by processing with High-Pressure Torsion, Journal of Materals Science, 48, 4713-4722, 2013.05.
87. 米本 涼, 有田 誠, 堀田 善治, HPT加工によるAl/Fe3O4複合粉末の固化と磁気特性, 軽金属, 62, 11, 459-463, 2012.11.
88. 田添 聖誠, 堀田 善治, 高圧すべり加工プロセスを用いた7075アルミニウム合金の結晶粒微細化と高強度化, 軽金属, 62, 11, 454-458, 2012.11.
89. 赤間 大地, 李 昇原, 堀田 善治, 松田 健二, 廣澤 渉一 , HPT加工により結晶粒を超微細化したAl-Mg-Si-X(X=Cu, Ag, Pt, Pd)合金の時効挙動, 軽金属, 62, 11, 448-453, 2012.11.
90. J. M. Cubero-Sesin, Zenji Horita, Strengthening of Al through addition of Fe and by processing with High-Pressure Torsion
, Journal of Materals Science, 2012.10.
91. M.Ashida, Zenji Horita, Effects of ball milling and high-pressure torsion for improving mechanical properties of Al-Al2O3 nanocomposites, JOURNAL OF MATERIALS SCIENCE, 47, 22, 7821-7827, 2012.11.
92. K.Edalati, Zenji Horita, T.Furuta, S.Kuramoto, Dynamic Recrystallization and Recovery during High-Pressure Torsion: Experimental Evidence by Torque Measurement Using Ring Specimens
, Materials Science and Engineering A, 559, 506-509, 2013.01.
93. Yoshifumi Ikoma, K.Hayano, K.Edalati, K.Saito, Q.Guo, Zenji Horita, Phase transformation and nanograin refinement of silicon by processing through high-pressure torsion, APPLIED PHYSICS LETTERS, 101, 12, 1-4, 2012.09.
94. J. M. Cubero-Sesin, Zenji Horita, Mechanical Properties and Microstructures of Al-Fe Alloys Processed by High-Pressure Torsion, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 43A, 13, 5182-5192, 2012.12.
95. Kaveh Edalati, Zenji Horita, PROCESSING SHEETS AND WIRES BY CONTINUOUS HIGH-PRESSURE TORSION, REVIEWS ON ADVANCED MATERIALS SCIENCE, 31, 1, 5-11, 2012.08.
96. S.Kuramoto, T.Furuta, N.Nagasako, Zenji Horita, High Strength Fe-Ni-Co-Ti Alloy, R&D Review of Toyota CRDL, Vol.43, No3, 1-1, 2012.09.
97. Kaveh Edalati, S.Toh, H.Iwaoka, M.Watanabe, Zenji Horita, D.Kashioka, K.Kishida, H.Inui, Ultrahigh strength and high plasticity in TiAl intermetallics with bimodal grain structure and nanotwins, SCRIPTA MATERIALIA, 67, 10, 814-817, 2012.11.
98. J. M. Cubero-Sesin, Zenji Horita, Powder consolidation of Al–10 wt% Fe alloy by High-Pressure Torsion, Materials Science and Engineering A, 558, 462-471, 2012.09.
99. S.Lee, Zenji Horita, S.Hirosawa, K.Matsuda, Age-hardening of an Al-Li-Cu-Mg alloy (2091) processed by high-pressure torsion, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 546, 82-89, 2012.06.
100. Kaveh Edalati, S.Toh, T.Furuta, S.Kuramoto, M.Watanabe, Zenji Horita, Development of ultrahigh strength and high ductility in nanostructured iron alloys with lattice softening and nanotwins, SCRIPTA MATERIALIA, 67, 5, 511-514, 2012.09.
101. I.Son, Hiroaki NAKANO, Satoshi Oue, S.Kobayashi, Hisaaki FUKUSHIMA, Zenji Horita, Effect of Equal-Channel Angular Pressing on Pitting Corrosion of Pure Aluminum, International Journal of Corrosion, Article ID450854, 2012.04.
102. Hiroaki NAKANO, Satoshi Oue, S.Taguchi, S. Kobayashi, Zenji Horita, Stress-Corrosion Cracking of Aluminum–Magnesium Alloy Processed by Equal-Channel Angular Pressing
, International Journal of Corrosion,Article ID543212 , 2012.04.
103. M.Ashida, N.Sumida, K.Hasezaki, H.Matsunoshita, Zenji Horita, Effects of Low Rotational Speed on Crystal Orientation of Bi2Te3-Based Thermoelectric Semiconductors Deformed by High-Pressure Torsion, MATERIALS TRANSACTIONS, 53, 4, 588-591, 2012.04.
104. K.Edalati, S.Toh, H.Iwaoka, Zenji Horita, Microstructural characteristics of tungsten-base nanocomposites produced from micropowders by high-pressure torsion, ACTA MATERIALIA, 60, 9, 3885-3893, 2012.05.
105. T. Masuda, S. Hirosawa, Z. Horita and K. Matsuda, Experimental and computational studies of competitive precipitation behavior observed in an Al-Mg-Si alloy with high dislocation density and ultrafine-grained microstructures, Journal Japan Institute of Metals, 75, 283-290,, 2011.12.
106. K. Edalati, S. Toh, Y. Ikoma and Z. Horita, Plastic deformation and allotropic phase transformations in zirconia ceramics during highpressure torsion, Scripta Materialia, 65, 974-977, 2011.12.
107. K. Edalati1, R. Miresmaeili, Z. Horita1, H. Kanayama and R. Pippan, Significance of temperature increase in processing by highpressure torsion, Materials Science and Engineering A, 528, 7301-7305, 2011.10.
108. C. Xu, Z. Horita and T. G. Langdon, Microstructural evolution in an aluminum solid solution alloy processed by ECAP, Materials Science and Engineering A, 528, 6059-6065, 2011.10.
109. 岩岡秀明、藤岡直好、原井陽介、堀田善治, 厚い試料を用いた高圧ねじり(HPT)加工および高圧すべり(HPS)加工におけるひずみ導入分布と結晶粒超微細化, 日本金属学会誌, 第75巻, 第7号, 412-418, 2011.09.
110. K. Edalati and Z. Horita, Significance of Homologous Temperature in Softening Behavior and Grain Size of Pure Metals Processed by High-Pressure Torsion, Materials Science and Engineering A, 528, 7514-7523, 2011.09.
111. K. Edalati and Z. Horita, High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness, Acta Materialia, 59, 6831-6836,, 2011.09.
112. Y. Mine, K. Tachibana and Z. Horita, Grain-boundary diffusion and precipitate trapping of hydrogen in ultrafine-grained austenitic stainless steels processed by high-pressure torsion, Materials Science and Engineering A, 528, 8100-8105, 2011.09.
113. Y Mine, S. Matsumoto and Z. Horita, Strengthening and hydrogen embrittlement of ultrafine-grained Fe-0.01 mass% C alloy processed by high-pressure torsion, Corrosion Science, 53, 2969–2977, 2011.09.
114. K. Edalati, H. Iwaoka, Z. Horita, M. Konno and T. Sato, Mechanism of Unusual Hardening in Ti/Al2O3 Composites Fabricated by High-Pressure Torsion Followed by Annealing, Materials Science and Engineering, A, 529, 435– 441, 2011.09.
115. K. Edalati, A. Yamamoto, Z. Horita and T. Ishihara, High-Pressure Torsion of Pure Magnesium: Evolution of Mechanical Properties, Microstructures and Hydrogen Storage Capacity with Equivalent Strain, Scripta Materialia, 64, 880-883, 2011.09.
116. C. Xu, Z. Horita and T. G. Langdon, Mechanical Properties of Al-6061 and an Al-6061 Metal Matrix Composite Processed by High-Pressure Torsion, Materials Science Forum, 667-669, 689-694, 2011.09.
117. K. Edalati and Z. Horita, Correlation of Physical Parameters with Steady-State Hardness of Pure Metals Processed by High-Pressure Torsion, Materials Science Forum, 667-669, 683-688, 2011.05.
118. S. Lee and Z. Horita, Annealing Behavior of FeNi Alloy Processed by High-Pressure Torsion, Materials Science Forum, 667-669, 313-318, 2011.05.
119. H. Matsunaga, Z. Horita, K. Imamura, T. Kiss and X. Sauvage, Aging Behavior of Cu-Ni-Si Alloy Processed by High-Pressure Torsion, Materials Science Forum, 667-669, 307-312, 2011.05.
120. D. Akama, Z. Horita, K. Matsuda and S. Hirosawa, Aging Behavior of Al-Mg-Si Alloys Processed by High-Pressure Torsion, Materials Science Forum, 667-669, 259-264, 2011.05.
121. K.Tazoe, S. Honda and Z. Horita, Application of High-Pressure Sliding for Grain Refinement of Al and Mg Alloys, Materials Science Forum,, 667-669, 91-96, 2011.05.
122. H. Iwaoka, Y. Harai and Z. Horita, High-Pressure Torsion for Ring Samples in Different Thicknesses, Materials Science Forum, 667-669, 51-56, 2011.05.
123. K. Edalati, H. Iwaoka, Z. Horita, M. Tanaka, K. Higashida, H. Fujiwara, and K. Ameyama, Fabrication of ultrafine-grained Ti-(5–50wt.%)Al2O3 composites using high-pressure torsion, Kovove Mater, 49, 85-92, 2011.05.
124. K. Edalati. and Z. Horita, Correlations between Hardness and Atomic Bond Parameters of Pure Metals and Semi-metals after Processing by High-Pressure Torsion, Scripta Materialia, 64, 161-164, 2011.05.
125. Y. Mine, T. Tsumagari and Z. Horita, Hydrogen trapping on lattice defects produced by high-pressure torsion in Fe-0.01 mass% C alloy, Scripta Materialia, 63, 552–555, 2010.12.
126. K. Edalati, Z. Horita, H. Fujiwara and K. Ameyama, Cold Consolidation of Ball-Milled Titanium Powders Using High-Pressure Torsion, Metallurgical and Materials Transactions A, 41, 3308-3317, 2010.12.
127. Y. Mine, K. Tachibana and Z. Horita, Effect of high-pressure torsion processing and annealing on hydrogen embrittlement of type 304 metastable austenitic stainless steel, Metallurgical and Materials Transactions A, 41, 3110-3120, 2010.12.
128. T. Furuta, S. Kuramoto, K. Horibuchi, T.Ohsuna and Z. Horita, Ultrahigh Strength of Nanocrystalline Iron-Based Alloys Produced by High Pressure Torsion, Journal of Materials Science, 45, 4745-4753, 2010.12.
129. K. Edalati and Z. Horita, Continuous High-Pressure Torsion, Journal of Materials Science, 45, 4578-4582, 2010.11.
130. I.J. Son, H. Nakano, S. Oue, S. Kobayashi, H. Fukushima and Z. Horita, Effect of Equal Channel Angular Pressing on the Pitting Corrosion Resistance of Aluminum-Copper Alloy, Surface Technology, 61, 50-57, 2010.11.
131. Y.B. Wang, X.Z. Liao, Y.H. Zhao, E.J. Lavernia, S.P. Ringer, Z. Horita, T.G. Langdon and Y.T. Zhu, The role of stacking fault and twin boundaries in grain refinement of a Cu-Zn alloy processed by high-pressure torsion, Materials Science and Engineering A, 527, 4959-4966, 2010.11.
132. Y. Li, Y.H. Zhao, W. Liu, C. Xu, Z. Horita, X.Z. Liao, Y.T. Zhu, T.G. Langdon and E.J. Lavernia, Influence of grain size on the density of deformation twins in Cu-30%Zn alloy, Materials Science and Engineering A, 527, 3942-3948, 2010.10.
133. S. Lee, D. Akama, Z. Horita, T. Masuda, S. Hirosawa and K. Matsuda, Aging Behavior of Al-Li-Cu-Mg Alloy Processed by High-Pressure Torsion, Materials Science Forum, 654-656, 1243-1246, 2010.10.
134. K. Edalati, Z. Horita, H. Fujiwara, K. Ameyama, M. Tanaka and K. Higashida, High Strength and Ductility in Ball-Milled Titanium Powders Consolidated by High-Pressure Torsion, Materials Science Forum, 654-656, 1239-1242, 2010.10.
135. S. Nishihata, K. Suehiro, M. Arita, M. Masuda and Z. Horita, High-Pressure Torsion for Giant Magnetoresistance and Better Magnetic Properties, Advanced Engineering Materials, 12, 793-797, 2010.10.
136. K. Edalati and Z. Horita, Application of High-Pressure Torsion for Consolidation of Ceramic Powders, Scripta Materialia, 63, 174–177, 2010.10.
137. S. Lee, K. Edalati and Z. Horita, Microstructures and Mechanical Properties of Pure V and Mo Processed by High-Pressure Torsion, Materials Transactions, 51, 1072-1079, 2010.09.
138. K. Edalati and Z. Horita, Universal Plot for Hardness Variation in Pure Metals Processed by High-Pressure Torsion, Materials Transactions, 51, 1051-1054, 2010.09.
139. K Edalati, Z. Horita and Y. Mine, High-pressure torsion of hafnium, Materials Science and Engineering, A, 527, 2136-2141, 2010.09.
140. K. Edalati, Y. Yokoyama and Z. Horita, High-Pressure Torsion of Machining Chips and Bulk Discs of Amorphous Zr50Cu30Al10Ni10, Materials Transactions, 51, 23-26, 2010.09.
141. C. Xu, Z. Horita and T. G. Langdon, Microstructural evolution in pure aluminum in the early stages of processing by high-pressure torsion, Materials Transactions, 51, 2-7, 2010.09.
142. Y. Mine, Z. Horita and Y. Murakami, Effect of high-pressure torsion on hydrogen trapping in Fe-0.01 mass% C and type 310S austenitic stainless steel, Acta Materialia, 58, 649-657,, 2010.05.
143. K. Edalati, Z. Horita, M. Tanaka and K. Higashida, High Pressure Torsion of Pure Ti: Effect of Pressure and Strain on Allotropy, Advanced Materials Research, 89-91, 171-176, 2010.05.
144. M. Ashida, T. Hamachiyo, K. Hasezaki, H. Matsunoshita and Z. Horita, Effect of high pressure torsion on crystal orientation to improve the thermoelectric property of a Bi2Te3-based thermoelectric semiconductor, Advanced Materials Research, 89-91, 41-46, 2010.05.
145. H.Li, A.Misra, Y.T.Zhu, Z.Horita, C.C.Koch, T.G.Holesinger, Processing and Characterization of Nanostructured Cu-Carbon Nanotube Composites, Materials Science and Engineering A, 523, 60-64, 2009.12.
146. K.Edalati, Y.Ito, K.Suehiro and Z.Horita, Softening of High Purity Aluminum and Copper Processed by High Pressure Torsion, International Journal of Materials Research, 100, 1668-1673, 2009.11.
147. H.Li, A.Misra, Z.Horita, C.C.Koch, N.A.Mara, P.O.Dickerson and Y.Zhu, Strong and Ductile Nanostructured Cu-Carbon Nanotube Composite Pillar, Applied Physics Letters, 95, 071907-3,, 2009.10.
148. M. Kawasaki, Z. Horita and T. G. Langdon, Microstructural evolution in high purity aluminum processed by ECAP, Materials Science Engineering, A, 524, 143–150, 2009.10.
149. S.Kuramoto,T.Furuta,N.Nagasako and Z.Horita, Lattice Softening for Producing Ultrahigh Strength of bulk nanocrystalline iron base alloy, Applied Physics Letters, 95, 211901–1-3, 2009.09.
150. D.Orlov,Y.Beygelzimer,S.Synkov,V.Varyukhin,N.Tsuji and Z.Horita, Plastic flow, structure and mechanical properties in pure Al deformed by twist extrusion, Materials Science Engineering A, 519, 105-111, 2009.09.
151. Pei-Ling Sun, Y.H. Zhao, J.C. Cooley, M.E. Kassner, Z. Horita, T.G. Langdon, E.J. Lavernia and Y.T. Zhu, Stacking Fault Energy Effect on Strength and Ductility of Nanostructured Alloys: an Evaluation with Minimum Solution Hardening, Materials Science Engineering A, 525, 83-86, 2009.08.
152. K.Edalati, Z.Horita, S.Yagi, E.Matsubara, Allotropic phase transformation of pure zirconium by high-pressure torsion, Materials Science and Engineering, A, 523, 277-281, 2009.08.
153. K.Edalati, Z.Horita, M.Tanaka and K.Higashida, High Pressure Torsion of Pure Ti: Effect of Pressure and Strain on Allotropy, Advanced Materials Research, 89-91, 171-176, 2009.07.
154. M.Ashida, T.Hamachiyo, K.Hasezaki, H.Matsunoshita, M.Kai and Z.Horita, Texture of bismuth telluride-based thermoelectric semiconductors processed by high pressure torsion, Journal of Physics and Chemistry of Solids, 70, 1089-1092, 2009.07.
155. I.J. Son, H. Nakano, S. Oue, S. Kobayashi, H. Fukushima and Z. Horita, Effect of equal-channel angular pressing on pitting corrosion resistance of anodized aluminum-copper alloy, Transactions Nonferrous Metals Society of China, 19, 904-908, 2009.07.
156. K.Edalati, E.Matsubara and Z.Horita, Processing Pure Ti by High-Pressure Torsion in Wide Range of Pressures, Metallurgical and Materials Transactions A, 40, 2079-2086,, 2009.06.
157. T.Furuta, M.Hara, Z.Horita and S.Kuramoto, Severe plastic deformation in Gum Metal with composition at structural stability limit, International Journal of Materials Research, 100, 1217-1221, 2009.06.
158. H. Matsunaga and Z. Horita, Softening and Microstructural Coarsening without Twin Formation in FCC Metals with Low Stacking Fault Energy after Processing by High-Pressure Torsion, Materials Transactions, 50,1633-1637,, 2009.05.
159. T.Hamachiyo, M.Ashida, K.Hasezaki, H.Matsunoshita, M.Kai and Z.Horita, Thermoelectric Properties of Bi2Te3-Related Materials Finely Grained by Mechanical Alloying and High Pressure Torsion, Materials Transactions, 50, 1592-1595,, 2009.10.
160. Y. Mine, Z. Horita and Y. Murakami, Effect of hydrogen on martensite formation in austenitic stainless steels in high pressure torsion, Acta Materialia, 57,2993-3002, 2009.10.
161. Z.W. Wang, Y.B. Wang, X.Z. Liao, Y.H. Zhao, E.J. Lavernia, Y.T. Zhu, Z. Horita and T.G. Langdon, Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials, Scripta Materialia, 60,52-55, 2009.10.
162. K. Edalati, Z. Horita and T. G. Langdon, The significance of slippage in processing by high-pressure torsion, Scripta Materialia, 60, 9-12, 2009.10.
163. 堀田善治, 巨大ひずみ加工による超微細組織化と高性能化, 塑性と加工, 第50巻、第578号、172-176, 2009.03.
164. T.Fujioka and Z.Horita, Development of High-pressure Sliding for Microstructural Refinement of Rectangular Metallic Sheets, Materials Transactions, 50, 930-933, 2009.03.
165. C.Xu, S.V.Dobatkin, Z.Horita, T.G.Langdon, Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion, Materials Science and Engineering A, 500, 170-175, 2009.01.
166. 堀田善治、野口悦子, ECAPによる超強加工を利用したアルミニウム合金の粒子分散制御, ふぇらむ, 第14巻、第1号、18-18, 2009.01.
167. D.Orlov, Y.Beygelzimer, S.Synkov, V.Varyukhin and Z.Horita, Microstructure Evolution in Pure Al Processed with Twist Extrusion , Materials Transactions, 50, 96-100, 2009.01.
168. K.Edalati and Z.Horita, Scaling-Up of High Pressure Torsion Using Ring Shape, Materials Transactions, 50, 92-95, 2009.01.
169. K.Kaneko, T.Hata, T.Tokunaga and Z.Horita, Fabrication and characterization of supersaturated Al-Mg alloys by severe plastic deformation and their mechanical properties, Materials Transactions, 50, 76-81, 2009.01.
170. K.Edalati, T.Fujioka and Z.Horita, Variation of Mechanical Properties and Microstructures with Equivalent Srain in Pure Fe Processed by High pressure Torsion, Materials Transactions, 50, 44-50, 2009.01.
171. T.Inoue, Z.Horita, H.Somekawa and F.Yin, Distributions of hardness and strain during compression in pure aluminum processed with equal-channel angular pressing and subsequent annealing, Materials Transactions, 50, 27-33, 2009.01.
172. Y.Harai, K.Edalati, Z.Horita and T.G.Langdon, Using ring samples to evaluate the processing characteristics in high-pressure torsion, Acta Materialia, 57, 1147-1153, 2009.02.
173. Y.Ito and Z.Horita, Microstructural Evolution in Pure Aluminum Processed by High-Pressure Torsion , Materials Science and Engineering A, 503, 32-36, 2009.01.
174. 堀田 善治, 超強加工によるバルク材の超微細組織化と力学特性向上, 鉄と鋼, 94,599-607, 2008.12.
175. K.Suehiro, S.Nishimura, Z.Horita, S.Mitani, K.Takanashi and H.Fujimori, High Pressure Torsion for Production of Magnetoresistance in Cu-Co Alloy, J.Materials Science, 43,7349-7353, 2008.07.
176. C.Xu, Z.Horita and T.G.Langdon, Evaluating the Influence of Pressure and Torsional Strain on Processing by High-Pressure Torsion , J. Materials Science, 43, 7286-7292, 2008.12.
177. T.Inoue, Z.Horita, H.Somekawa and K.Ogawa, Effect of initial grain sizes on hardness variation and strain distribution of pure aluminum severely deformed by compression tests, Acta Materialia, 2008.12.
178. Z.W. Wang, Y.B. Wang, X.Z. Liao, Y.H. Zhao, E.J. Lavernia, Y.T. Zhu, Z. Horita and T.G. Langdon, Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials, Scripta Materialia, 60, 52–55, 2009.01.
179. K. Edalati, Z. Horita and T. G. Langdon, The significance of slippage in processing by high-pressure torsion, Scripta Materialia, 60, 9-12 , 2009.01.
180. I.J. Son, H. Nakano, S. Oue, S. Kobayashi, H. Fukushima and Z. Horita, Pitting Corrosion Resistance of Anodized Aluminum-Copper and Aluminum-Magnesium Alloys Processed by Equal-Channel Angular Pressing, Aluminum Alloys, Their Physical Mechanical Properties, Vol.2,2066-2072, 2008.10.
181. C. Xu, Z. Horita and T. G. Langdon, The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion, Acta Materialia, 56, 5168–5176, 2008.09.
182. K. Edalati, T. Fujioka and Z. Horita, Microstructure and Mechanical Properties of Pure Cu Processed by High Pressure Torsion, Materials Science and Engineering A, 497, 168-173, 2008.08.
183. 孫 仁俊、中野博昭、大上 悟、小林繁夫、福島久哲、堀田善治, 強ひずみ加工を施したAl-Cu合金の陽極酸化膜の耐孔食性, 日本金属学会誌, 第72巻第5号、353-359, 2008.08.
184. M. Ashida, T. Hamachiyo, K. Hasezaki, H. Matsunoshita, M. Kai and Z. Horita, Control of crystallographic orientation and grain refinement in Bi2Te3-based thermoelectric semiconductors by applying high pressure torsion, Materials Science Forum, 584-586, 1006-1011, 2008.07.
185. C. Xu, A. P. Zhilyaev. Z. Horita and T. G. Langdon, Factors Influencing the Development of Homogeneity in Disks Processed by High-Pressure Torsion, Materials Science Forum, 584-586, 3-8, 2008.07.
186. Y. Ito, Y. Harai, T. Fujioka, K. Edalati and Z. Horita, Use of Ring Sample for High-Pressure Torsion and Microstructural Evolution with Equivalent Strain, Materials Science Forum, 584-586, 191-196, 2008.08.
187. K.V. Rajulapati, R.O. Scattergood, K.L. Murty, Z. Horita, T.G. Langdon, C.C. Koch, Mechanical Properties of Bulk Nanocrystalline Aluminum-Tungsten alloys, Metallurgical and Materials Transactions, 39A, 2528-2534, 2008.07.
188. 中村拓郎、堀田善治, Bulk-HPT加工による純銅の結晶粒微細化, 銅と銅合金, 第47巻1号、98-100, 2008.06.
189. T. Tokunaga, K. Kaneko and Z. Horita, Production of Aluminum-Matrix Carbon Nanotube Composite Using High Pressure Torsion, Materials Science and Engineering A, 490, 300–304, 2008.06.
190. M. Kai, Z. Horita, T G. Langdon, Developing grain refinement and superplasticity in a magnesium alloy processed by high-pressure torsion, Materials Science and Engineering, A, 488, 117–124, 2008.06.
191. Z. Horita and T. G. Langdon, Achieving Exceptional Superplasticity in a Bulk Aluminum Alloy Processed by High-Pressure Torsion, Scripta Materialia, 58, 1029-1032, 2008.02.
192. T. Tokunaga, K. Kaneko, K. Sato and Z. Horita, Microstructure and mechanical properties of aluminum–fullerene composite fabricated by high pressure torsion, Scripta Materialia, 58, 735-738, 2008.05.
193. S.C. Yoon, Z. Horita, H.S. Kim, Finite element analysis of plastic deformation behavior during high pressure torsion processing, Journal of Materials Processing Technology, 201(1-3), 32-36, 2008.05.
194. Y. H.Zhao, J.F.Bingert, Y.T.Zhu, X.Z.Liao, R.Z.Valiev, Z.Horita, T.G.Langdon, Y.Z.Zhou and E.J.Lavernia, Tougher ultrafine grain Cu via high-angle grain boundaries and low dislocation density, Appl..Phys.Lett., 92, 081903, 2008.04.
195. L. Balogh, T. Ungár, Y. Zhao, Y.. Zhu, Z. Horita, C. Xu and T. G. Langdon, Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloys, Acta Materialia, 56,809-820, 2008.04.
196. Y.H. Zhao, Z. Horita, T.G. Langdon and Y.T. Zhu, Evolution of defect structures during cold rolling of ultrafine-grained Cu and Cu–Zn alloys: Influence of stacking fault energy, Materials Science and Engineering, A, 474, 342-347, 2008.04.
197. K. Suehiro, S. Nishimura and Z. Horita, Change in Magnetic Property of Cu-6.5mass%Co Alloy through Processing by ECAP, Materials Transactions, 49, 102-106, 2008.03.
198. Y. Harai, M. Kai, K. Kaneko, Z. Horita and T. G.. Langdon, Microstructural and Mechanical Characteristics of an AZ61 Magnesium Alloy Processed by High-Pressure Torsion, Materials Transactions, 49,76-83, 2008.03.
199. J. Dvorak, V. Sklenicka and Z.Horita, Microstructural evolution and mechanical properties of high purity aluminium processed by equal-channel angular pressing, Materials Transactions, 49,15-19, 2008.03.
200. D. Orlov, Y. Beygelzimer, S. Synkov, V. Varyukhin and Z. Horita, Evolution of Microstructure and Mechanical Properties in Pure Al by Twist Extrusion, Materials Transactions, 49,2-6, 2008.02.
201. I.J. Soon, H. Nakano, S. Oue, S. Kobayashi, H. Fukushima and Z. Horita, Effect of Annealing on the Pitting Corrosion Resistance of Anodized Aluminum-Magnesium Alloy Processed by Severe Plastic Deformation, J. Japan, Inst. Metals, 72, 27-34, 2008.02.
202. N. Lugo, N. Llorca, J.M. Cabrera, Z. Horita, Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion, Materials Science and Engineering, A, 477, 366–371, 2008.02.
203. J. Gubicza, I. Schiller, N.Q. Chinh, J. Illy, Z. Horita and T.G. Langdon, The effect of severe plastic deformation on precipitation in supersaturated Al–Zn–Mg alloys, Materials Science and Engineering, A, 460-461, 77-85, 2007.12.
204. Y.H. Zhao, X.Z. Liao, Z. Horita, T.G. Langdon and Y.T. Zhu , Determining the optimal stacking fault energy for achieving high ductility in ultrafine-grained Cu–Zn alloys, Materials Science and Engineering, A, 493,123-129, 2008.01.
205. Y. Harai, Y.Ito and Z. Horita, High Pressure Torsion Using Ring Specimens, Scripta Materialia, 58, 469-482,, 2008.01.
206. 堀田 善治, ECAP (Equal-Channel Angular Pressing)について, 学振133委員会, Vol. No. pp.-, 2003.10.
207. Kunihiro Ohashi Takeshi Fujita Keiichro Oh-ishi Kenji Kaneko Zenji・Horita and T・G・.Langdon, Microstructural Control of a Precipitate-Hardenable Al-Ag Alloy Using Severe Plastic Deformation, Materials Science Forum, 426-4, 2637-2642, Vol.426-432 No. pp.2637-2642, 2003.01.
208. Masakazu Kamachi、Zenji Horita、Minoru Furukawa and Terence G. Langdon, Grain Refinement of Plate Samples Using Equal-Channel Angular Pressing, The Iron and Steel Institute of Japan秋季講演大会, Vol. No. pp.-, 2003.10.
209. 堀田 善治, 強ひずみ加工と時効処理による Al-Mg-Si合金の組織制御, 第2回組織制御委員会, Vol. No. pp.-, 2003.11.
210. 八尋由典、 藤田武志、金子賢治、堀田善治, FIBによる2次電子像コントラストの結晶方位依存性, 日本顕微鏡学会九州支部講演会, Vol. No. pp.-, 2003.11.
211. 宮原 勇一、松原 聖、槙井 浩一、堀田 善治, Mg合金における微細粒形成と超塑性特性に及ぼすECAP加工前処理条件の影響, 日本金属学会春期大会, Vol. No. pp.-, 2003.03.
212. 堀田善治, 高速連続結晶粒微細化 プロセスの開発, 軽金属学会九州支部談話会, Vol. No. pp.-, 2003.10.
213. 蒲池正一 、古川 稔 、堀田善治 、Terence G. Langdon, 板材用ECAP加工の開発と結晶粒微細化, 軽金属学会, Vol. No. pp.-, 2003.11.
214. T. Fujita K. Kaneko and Z. Horita, Diffusion Analysis across Grain Boundary in Al-3.7mass%Cu Alloy Using Analytical Electron Microscopy, Mater.Trans, 44, 7, 1336-1342, Vol.44 No.7 pp.1336-1342, 2003.01.
215. 藤田武志 堀田善治, 強ひずみ加工制御の微細粒組織を用いた粒界拡散の評価, 日本金属学会, Vol. No. pp.-, 2003.10.
216. 堀田 善治, 強ひずみ加工によるナノ組織制御, アモルファス・ナノ材料第147委員会 第83回研究会, Vol. No. pp.-, 2003.12.
217. Kunihiro Ohashi Takeshi Fujita Keiichiro Oh-ishi Kenji Kaneko Zenji Horita and Terence G. Langdon, Microstructural Control of a Precipitate-Hardenable Al-Ag Alloy Using Severe Plastic Deformation, THERMEC'2003, PTS 1-5, 426-4, 2637-2642, Vol. No. pp.-, 2003.07.
218. Etsuko Noguchi Koji Neishi Keiichiro Oh-ishi Zenji Horita nd Terence G. Langdon, Microstructures of Al-1.5%Si Alloy Processed through combination of ECAP and Aging, The 8th IUMRS International Conference on Advanced Materials, Vol. No. pp.-, 2003.10.
219. Y. Huang C. Xu M. Furukawa Z. Horita and T. G.Langdon, Developing a Processing Route for Grain Refinement in An Al-6061 Metal Matrix Composite, Hot Deformation of Aluminum AlloysⅢ TMS, Vol. No. pp.357-364, 2003.01.
220. 堀田 善治, 透過電子顕微鏡とFIBを用いた最近の研究, Vol. No. pp.-, 2003.09.
221. M.Matsubara Y. Miyahara K. Makii Z. Horita and T.G. Langdon, Using Extrusion and ECAP Processing to Achieve Low Temperature and High Strain Rate Superplasticity, Materials Science Forum, 419-4, 497-502, Vol.419-422 No. pp.497-502, 2003.01.
222. 堀田 善治, 強ひずみ加工によるCu-Zn-Sn合金の超塑性特性温間鍛造性, 銅及び銅合金技術研究会講演大会, Vol. No. pp.-, 2003.11.
223. 八尋由典、藤田武志、金子賢治、堀田善治, FIBで観察する2次電子像コントラストの定量的評価, 分析電子顕微鏡討論会, Vol. No. pp.-, 2003.09.
224. S.Lee M.Furukawa Z.Horita and T.G.Langdon, Developing a superplastic forming capability in a commercial aluminum alloy without scandium or zirconium additions, Materials Sceince and Engineering, 342, 1-2, 294-301, Vol.342 No. pp.294-301, 2003.01.
225. M.Furukawa Z. Horita A. P.Zhiyaev and T. G.Langdon, Developing Ultrafine-Graine Microstructures through the Use of Severe Plastic Deformation, Materials Scinece Forum, 426-4, 2631-2636, Vol.426-432 No. pp.2631-2636, 2003.01.
226. M.Furukawa H. Akamatsu Z.Horita and T.G.Langdon, Properties of Aluminum Alloys Processed Using a 60 Degrees Die, Materials Science Forum, Vol. No. pp.-, 2003.01.
227. M. Matsubara Y. Miyahara Z. Horita and T.G. Langdon, Developing Superplasticity in a Magnesium Alloy through a Combination of Extrusion and ECAP, Acta Materialia, 51, 11, 3073-3084, Vol.51 No. pp.3073-3084, 2003.01.
228. T.Fujita Z.Horita and T.G.Langdon, Diffusion Behavior in Fine-Grained Al-Mg and Al-Zn Alloys Processed by Equal-Channel Angular Pressing, Materials Science and Engineering, Vol. No. pp.-, 2003.01.
229. M. Kamachi M.Furukawa Z. Horita and T. G.Langdon, Equal-Channel Angular Pressing Using Plate Samples, Acta Materialia, 361, 1-2, 258-266, Vol.361 No. pp.258-266, 2003.01.
230. M. Kamachi M. Furukawa Z. Horita and T.G. Langdon, A Model Investigation of the Shearing Characteristics in Equal- Channel Angular Pressing, Materials Science and Engineering, 347, 1-2, 223-230, Vol.A -347 No. pp.223-230, 2003.01.
231. 与賀田雄樹、金子賢治、林靖彦、徳永智春、堀田善治, マイクロ波プラズマCVD法を用いて作製した炭素ナノ構造体の構造制御および評価, 日本金属学会秋季大会, Vol. No. pp.-, 2003.10.
232. M. Furukawa Y. Fukuda K. Oh-ishi Z. Horita andT. G.Langdon, An Investigation of Deformation in Aluminum Single Crystals Using Equal-Channel Angular Pressing, Materials Scinece Forum, 426-4, 2711-2716, Vol.426-432 No. pp.2711-2716, 2003.01.
233. 根石浩司、白石恒司、中村克昭、金子賢治、中垣恒彦、堀田善治, 強ひずみ加工連続高速加工プロセスSTSPによるFe−C合金の結晶微細化と機械的性質の向上, 日本金属学会, Vol. No. pp.-, 2003.10.
234. 宮原 勇一、安達 和彦、前原 泰裕、堀田 善治, AZ31Mg合金ECAP材の室温引張特性, 日本金属学会秋期大会, Vol. No. pp.-, 2003.10.
235. 恵美直貴 藤田和子 藤田武志 金子賢治 堀田善治 山田容士(島根大総理工), 液相エピタキシャル法により作製した YBCO 単結晶膜の微細構造と厚膜化, 日本金属学会秋期大会, Vol. No. pp.-, 2003.10.
236. M. Furukawa Z. Horita and T. G.Langdon, Factors Influencing Microstructural Development in Equal-Channel Angular Pressing, Metals and Materials International, 9, 2, 141-149, Vol.9 No. pp.141-149, 2003.01.
237. Zenji Horita, Severe Plastic Deformation of Alloys: Microstructure and Mechanical Performance, Fundamental Issues on Plastic Deformation of Metals and AlloysSummer School for Graduate Students, Vol. No. pp.-, 2003.09.
238. M.Furukawa Z.Horita and T.G.Langdon, Developing a High Strain Rate Superplastic Forming Capability in Aluminum Alloys, Proceedings from International Symposium on Superplasticity and Superplastic Forming Technology, Vol. No. pp.15-24, 2003.01.
239. 堀田 善治, ECAP (Equal-Channel Angular Pressing)について, 学振133委員会, Vol. No. pp.-, 2003.10.
240. M. Furukawa Z. Horita and T. G.Langdon, Processing by Equal-Channel Angular Pressing:Application to Grain Boundary Engineering, Interface Science, Vol. No. pp.-, 2003.01.
241. 野口悦子、根石浩司、大石敬一郎、藤波隆善、堀田善治, Al-1.5%Si合金のECAP加工と時効組織, 軽金属学会春期大会, Vol. No. pp.-, 2003.05.
242. Katsuaki Nakamura Koji Neishi Kenji Kaneko Zenji Horita and Michihiko Nakagaki, 恒温鍛造用金属素材の連続結晶粒微細化プロセス, アルトピア, Vol.33 No.12 pp.9-14, 2003.01.
243. C. Xu M. Furukawa Z. Horita and T. G.Langdon, Achieving a Superplastic Forming Capability thorough Severe Plastic Deformation, Advanced Engineering Materilas, 5, 5, 359-364, Vol.5 No. pp.359-364, 2003.01.
244. C. Xu W.Dixon M. Furukawa Z.Horita andT. G.Langdon, Developing Superplasticity in a Spray-Cast Aluminum 7034 Alloy through Equal-Channel Angular Pressing, Material Letters, 57, 22-23, 3588-3592, Vol.57 No. pp.3588-3592, 2003.01.
245. 古川稔、福田征秀、大石敬一郎、堀田善治、T.G.Langdon, An Investigation of Deformation in Aluminum Single Crystals using Equal-Channel Angular Pressing, THERMEC2003 International Conference on Processing & Manufacturing of Advanced Materials, 426-4, 2711-2716, Vol. No. pp.-, 2003.07.
246. 堀田善治, ECAP加工した微細粒アルミニウム合金の圧延と焼純, 金属, Vol.73(3) No. pp.224-229, 2003.01.
247. Y. Miyahara M. Matsubara K. Neishi Z. Horita and T.G. Langdon, Superplastic Properties of Ultrafine-Grained Mg Alloys Processed by Extrusion Plus Equal-Channel Angular Pressing, Materials Science Forum, 419-4, 551-556, Vol.419-422 No. pp.551-556, 2003.01.
248. 古川稔, 単結晶を用いたECAP加工によるせん断変形組織の観察と方位解析, 2003年度日本金属学会秋季大会宿題テーマシンポジウム九州支部研究会, Vol. No. pp.-, 2003.05.
249. 堀田善治, EBSP法による拡散対界面の観察, 日本顕微鏡学会第59回学術講演会, Vol. No. pp.-, 2003.06.
250. 古川稔、蒲池正一、堀田善治、T.G.Langdon, Application of Equal-Channel Angular Pressing to Pure Aluminum Plate Samples, LiMAT 2003 (The Third International Conference on Light Materials forTransportation Systems), Vol. No. pp.-, 2003.11.
251. T.Utida N.Ashie K.Nakamura.Z.Hoirta and T.G.Langdkon, Superplasticity of a Cu-Zn-Sn alloy processed by equal-channel angular pressing, 8th International Conference on Superplasticity in Advanced Materials ICSAM 2003, 447-4, 483-488, Vol. No. pp.-, 2003.07.
252. 野口悦子、根石浩司、藤田武志、大石敬一郎、藤波隆善、堀田善治, 強ひずみ加工によるAl-Si合金の時効組織制御, 日本金属学会秋期大会, Vol. No. pp.-, 2003.10.
253. 酒井 玄毅、根石 浩司、堀田 善治、T.G.Langdon、S.V.Dobatkin, 微小引張試験片による強ひずみ加工材の力学特性評価, 日本金属学会九州支部, Vol. No. pp.-, 2003.06.
254. 酒井 玄毅、根石 浩司、堀田 善治、T.G.Langdon、S.V.Dobatkin, 微小引張試験片によるECAP及びHPT材力学特性評価, 日本金属学会秋季大会, Vol. No. pp.-, 2003.10.
255. Yuichi Miyahara Kiyoshi Matsubara Koji Neishi Zenji Horita and T.G.Langdon, Superplastic Properties of Ultrafine-Grained Mg Alloys Processed by Extrusion Plus Equal-Channel Angular Pressing, Platform Science and Technology for Advanced Magnesium Alloys 2003, 419-4, 551-556, Vol. No. pp.-, 2003.01.
256. 与賀田雄樹、金子賢治、林靖彦、徳永智春、堀田善治, マイクロ波プラズマCVD法を用いて作製した炭素ナノ構造体の構造制御および評価, 日本金属学会秋期大会, Vol. No. pp.-, 2003.10.
257. 藤田和子,藤田武志,大石敬一郎,金子賢治,堀田善治, ECAP加工したAl-Mg-Si合金に及ぼす過剰Si,Mgの影響, 日本金属学会, Vol. No. pp.-, 2003.10.
258. 古野佳瑞子、大石敬一郎、古川稔、堀田善治, ECAP法で加工したAl-Mg-Sc合金の超塑性変形中の組織変化, 第132回日本金属学会秋期大会, Vol. No. pp.-, 2003.10.
259. 八尋由典、藤田武志、金子賢治、堀田善治, FIB-SIM像の結晶方位依存性, 日本金属学会秋期大会, Vol. No. pp.-, 2003.10.
260. 藤田和子,藤田武志,大石敬一郎,金子賢治,堀田善治, ECAP加工したAl-Mg-Si合金に及ぼす過剰Si,Mgの影響, 日本顕微鏡学会九州支部学術講演会, Vol. No. pp.-, 2003.11.
261. 恵美直貴 藤田和子 金子賢治 堀田善治 山田容士, 過型電子顕微鏡によるYBCO薄膜の構造解析, 日本金属学会九州支部, Vol. No. pp.-, 2003.06.
262. Katsunori Ohshima Kenji Kaneko Takeshi Fujita and Zenji Horita, Determination of absolute thickness and mean-free path of thin foil specimen by ζ−factor method, Ist International Symposium on Active Nano-Characterization and Technology(ANCT2003), 53, 2, 137-142, Vol. No. pp.-, 2003.11.
263. 大嶋 克範、藤田 武志 金子 賢治、堀田 善治, 分析電子顕微鏡ζ因子法による膜圧と平均自由行程の測定, 日本金属学会2003年(第133回)秋季大会, Vol. No. pp.-, 2003.10.
264. 大嶋 克範、藤田 武志 金子 賢治、堀田 善治, 分析電子顕微鏡ζ因子法による膜圧測定, 金属学会九州支部合同学術講演会, Vol. No. pp.-, 2003.06.
265. 大田 英史 大橋 邦啓 大石 敬一郎 金子 賢治 堀田善治, ECAP加工したAl-Cu‐Sc合金の時効析出過程, 日本金属学会2003年秋季大会, Vol. No. pp.-, 2003.10.
266. 大田英史 大橋邦啓.大石敬一郎 金子賢治 堀田善治, ECAP加工したAl-Cu‐Sc合金の時効組織, 金属学会九州支部, Vol. No. pp.-, 2003.10.
267. 東野明彦、根石浩司、中村克昭、金子賢治、中垣通彦、堀田善治, 強ひずみ高速連続加工プロセス”STSP”によるAl-Mg合金の結晶粒微細化と機械的特性の向上, 日本金属学会秋期大会, Vol. No. pp.-, 2003.10.
268. Yuichi Miyahara Kiyoshi Matsubara Koichi Makii Zenji Horita and T.G.Langdon, Two-Step Process of Extrusion and Equal-Channel Angular Pressing for Grain Refinement in Mg Alloys, 2nd International Symposium on Ultrafine Grained Structures, Vol. No. pp.-, 2003.11.
269. T.Fujita Z.Horita and T.G.Langdon, Diffusion in Fine-Grained Al Alloys Having Low and High Angle Grain Boundaries, Materials Science Forum, 396-4, 1061-1066, Vol.396-402 No. pp.1061-1066, 2002.01.
270. Z.Horita K.Neishi and T.G.Langdon, Grain Refinement of Copper Based Alloys using ECAP, Ultrafine Grained Materials II, 449-457, Vol. No. pp.449-457, 2002.01.
271. N.Q.Chinh J.Illy Z.Kovacs Z.Horita and T.G.Langdon, Effect of Mg Additions on the Work Hardening Behavior of Aluminum over a Wide Range of Strain, Materials Science Forum, 396-4, 1007-1012, Vol.396-402 No. pp.1007-1012, 2002.01.
272. Y.Huang C.Xu S.Lee M.Furukawa Z.Horita and T.G.Langdon, Processing of an Aluminum-6061 Metal Matrix Composite by Equal-Channel Angular Pressing, Ultrafine Grained Materials II, Vol. No. pp.173-182, 2002.01.
273. T.R.McNelley D.L.Swisher Z.Horita and T.G.Langdon, Influence of Processing Route on Microstructure and Grain Boundary Development during Equal-Channel Angular Pressing of Pure Aluminum, Ultrafine Grained Materials II, Vol. No. pp.15-24, 2002.01.
274. N.Q.Chinh G.Voros Z.Horita and T.G.Langdon, Work Hardening Behavior of Aluminum over a Wide Range of Strain, Ultrafine Grained Materials II, Vol. No. pp.567-574, 2002.01.
275. M.Furukawa S. Ohta Z.Horita S. Lee and T.G.Langdon, Mechanical Properties of an Al-2024 Alloy after Equal-Channel Angular Pressing, Proc. of the International Symposium on Enabiling Technologies for Light Metals and Composite Materials and Their End-Products Ligh Metals 2002, Vol. No. pp.733-747, 2002.01.
276. Z.Kovacs N.Q.Chinh J.Lendvai Z.Horita and T.G.Langdon, Effect of Identation Size on Plastic Deformation Processes in an Ultrafine-Grained Al-3%Mg Alloy, Materials Science Forum, 396-4, 1073-1078, Vol.396-402 No. pp.1073-1078, 2002.01.
277. Z. Horita K. Matsubara K. Makii and T.G. Langdon, Developing a Superplastic Forming Capability in a Magnesium Alloy with High Damping Capacity, Scripta Mater, Vol.45 No. pp.255-260, 2002.01.
278. Y. Fukuda K. Oh-ishi Z. Horita and T.G. Langdon, Processing of a Low-Carbon Steel by Equal-Channel Angular Pressing, Acta Materialia, 50, 6, 1359-1368, Vol.50 No. pp.1359-1368, 2002.01.
279. K.Oh-ishi Y.Hashi A.Sadakata K.Kaneko Z.Horita and T.G.Langdon, Microstructural Control of an Al-Mg-Si Alloy Using Equal-Channel Angular Pressing, Materials Science Forum, 396-4, 333-338, Vol.396-402 No. pp.333-338, 2002.01.
280. K. Neishi Z. Horita and T.G. Langdon, Grain Refinement of Pure Nickel Using Equal-Channel Angular Pressing, Materials Science and Engineering, 325, 1-2, 54-58, Vol.A325 No. pp.54-58, 2002.01.
281. K.Neishi Z.Horita and T.G. Langdon, Achieving Superplasticity in Ultrafine-Grained Copper: Influence of Zn and Zr Additions, Materials Science and Engineering, 352, 1-2, 129-135, Vol.A352 No. pp.129-135, 2002.01.
282. T. Fujita Z. Horita and T.G. Langdon, Characteristics of Diffusion in Al-Mg Alloys with Ultrafine Grain Sizes, Philosophical Magazine, 82, 11, 2249-2262, Vol.A 82 No. pp.2249-2262, 2002.01.
283. K. Fujiwara and Z. Horita, Measurement of Intrinsic Diffusion Coefficients of Al and Ni in Ni3Al Using Ni/NiAl Diffusion Couples, Acta. Materialia, 50, 6, 1571-1579, Vol.50 No. pp.1571-1579, 2002.01.
284. M. Furukawa Z. Horita and T.G. Langdon, Factors Influencing the Shearing Patterns in Equal-Channel Angular Pressing, Materials Science and Engineering, 332, 1-2, 97-109, Vol.A332 No. pp.97-109, 2002.01.
285. A. P.Zhilyaev M.Furukawa Z. Horita and T. G.Langdon, Procesing and Properties of Bulk Ultrafine-Grained Materials Produced through Severe Plastic Deformation, Solid State Communications Warsow, Vol. No. pp.-, 2002.01.
286. S. Ota H. Akamatsu K. Neishi M.Furukawa Z.Horita and T.G.Langdon, Low-Temparature Superplasticity in Aluminum Alloys Processed by Equal-Channel Angular Pressing, Materials Transactions, 43, 10, 2364-2369, Vol.43 No. pp.2364-2369, 2002.01.
287. S. Lee A. Utsunomiya H. Akamatsu K. Neishi M. Furukawa Z. Horita and T.G. Langdon, Influence of Scandium and Zirconium on Grain Stability and Superplastic Ductilities in Ultrafine-Grained Al-Mg Alloys, Acta Materialia, 50, 3, 553-564, Vol.50 No. pp.553-564, 2002.01.
288. K. Akamatsu T. Fujinami Z. Horita and T.G. Langdon, Influence of Rolling on the Superplastic Behavior of Al-Mg-Sc Alloy after ECAP, Scripta Materialia, 44, 5, 759-764, Vol.44 No. pp.759-764, 2001.01.
289. A. Yamashita Z. Horita and T.G. Langdon, Improving the Mechanical Properties of Magnesium and a Magnesium Alloy through Severe Plastic Deformation, Materials Science and Engineering, 300, 1-2, 142-147, Vol.A300 No. pp.142-147, 2001.01.
290. Z. Horita T. Fujinami M. Nemoto and T.G. Langdon, Improvement of Mechanical Properties for Al-Alloys Using Equal-Channel Angular Pressing, J. Meterials Processing Technology, 117, 3, 288-292, Vol.117 No. pp.288-292, 2001.01.
291. S. Lee M. Furukawa Z. Horita and T.G. Langdon, Improving the Superplastic Properties of an Aluminum Alloy Using Equal-Channel Angular Pressing, The second International Conference on Light Materials for Transportation Systems (LiMAT-2001), Vol. No. pp.399-404, 2001.01.
292. M.Furukawa Z.Horita and T.G.Langdon, Using Severe Plastic Deformation for the Processing of Structural Metals, Modeling the Performance of Engineering Structural Materials II, Vol. No. pp.267-276, 2001.01.
293. K. Neishi T. Uchida A. Yamauchi K. Nakamura Z. Horita and T.G. Langdon, Low-Temperature Superplasticity in a Cu-Zn-Sn Alloy Processed by Severe Plastic Deformation, Materials Science and Engineering, 307, 1-2, 23-28, Vol.A307 No. pp.23-28, 2001.01.
294. K.Neishi T.Uchida A.Yamauchi K.Nakamura Z.Horita and T.G.Langdon, Attaining Low-Temperature Superplasticity in a Cu-Zn-Sn Alloy using Equal-Channel Angular pressing, The Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4), 2011-2014, Vol. No. pp.2011-2014, 2001.01.
295. K.Neishi T.Fujinami K.Oh-ishi Z.Horita and T.G.Langdon, Superplasticity in Cu-Zn-Zr Alloys processed by Equal-Channel Angular Pressing, The Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4), 2007-2010, Vol. No. pp.2007-2010, 2001.01.
296. Y. Fukuda K. Oh-ishi Z. Horita and T.G. Langdon, Microstructures and Mechanical Properties of Low-Carbon Steel Processed by Equal-Channel Angular Pressing, Proc. International Symposium on Ultrafine-Grained Steels, Vol. No. pp.156-159, 2001.01.
297. K. Neishi Z. Horita and T.G. Langdon, Achieving Superplasticity in a Cu-40%Zn Alloy through Severe Plastic Deformation, Scripta Materialia, 45, 8, 965-970, Vol.45 No. pp.965-970, 2001.01.
298. M. Furukawa Z. Horita and T.G. Langdon, Achieving Superplasticity and Superplastic Forming through Severe Plastic Deformation, Mater Res Soc.Symp.Proc., Vol.634 No. pp.B8.5.1-B8.5.12, 2001.01.
299. K. Fujiwara and Z.Horita, Structural Analysis of Diffusion Couple Interface Using EBSP, Bull. Japan Inst. Metals (Materia Japan), Vol.40 No. pp.634-637, 2001.01.
300. M. Furukawa S. Lee Z. Horita and T.G. Langdon, Mechanical Properties of Al-Mg-Sc and Commercial Aluminum Alloys after Equal-Channel Angular Pressing, The second International Conference on Light Materials for Transportation Systems (LiMAT-2001), Vol. No. pp.647-652, 2001.01.
301. Z. Horita T. Fujinami K. Sato S. B. Kang H. W. Kim and T.G. Langdon, Microstructures and Mechanical Properties of Aluminum Alloys Processed by Equal-Channel Angular Pressing, Advances in the Metallurgy of Aluminum Alloys Proc.of the James T. Staley HonorarySymposium on Aluminum Alloys, Vol. No. pp.271-275, 2001.01.
302. M. Furukawa A. Utsunomiya K. Mtsubara Z. Horita and T.G. Langdon, Influence of Magnesium on Grain Refinement and Ductility in a Dilute Al-Sc Alloy, Acta Materialia, 49, 18, 3829-3838, Vol.49 No. pp.3829-3838, 2001.01.
303. K. Oh-ishi Z. Horita D.J. Smith and T.G. Langdon, Grain Boundary Structure in Al-Mg and Al-Mg-Sc Alloys after Equal-Channel Angular Pressing, J. Mater. Res, 16, 2, 583-589, Vol.16 No. pp.583-589, 2001.01.
304. M. Murayama Z. Horita and K. Hono, Microstructure of Two Phase Al-1.7at% Cu Alloy Deformed by Equal-Channel Angular Pressing, Acta. Mater., 49, 1, 21-29, Vol.49 No. pp.21-29, 2001.01.
305. Z. Horita T. Fujinami and T.G. Langdon, The Potential for Scaling ECAP: Effect of Sample Size on Grain Refinement and Mechanical Properties, Materials Science and Engineering, 318, 1-2, 34-41, Vol.A318 No. pp.34-41, 2001.01.
306. Z. Horita S. Lee S. Ota K. Neishi and T.G. Langdon, Equal-Channel Angular Pressing as a Production Tool for Superplastic Materials, Materials Science Forum, 357-3, 471-476, Vol.357-359 No. pp.471-476, 2001.01.
307. Z. Horita M. Furukawa M. Nemoto and T.G. Langdon, Microstructural Control Using Equal-Cannel Angular Pressing, Netsushori (Heat Treatment), Vol.41 No. pp.68-74, 2001.01.
308. K.Fujiwara and Z.Horita, Intrinsic Diffusion in Ni3Al, Defect and Diffusion Forum, 194-1, 565-570, Vol.194-199 No. pp.566-570, 2001.01.
309. K.Matsubara A.Utsunomiya M.Furukawa Z.Horita and T.G.Langdon, Superplasticity of Aluminum Alloys Cotaining Various Solid Solution Elements Processed using Equal-Channel Angular Pressing, The Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4), 2003-2006, Vol. No. pp.2003-2006, 2001.01.
310. M. Furukawa A. Utsunomiya S. Komura Z. Horita M. Nemoto and T.G. Langdon, Optimization for Superplasticity in Ultrafine-Grained Al-Mg-Sc Alloys Using Equal-Channel Angular Pressing, Materials Science Forum, 357-3, 431-436, Vol.357-359 No. pp.431-436, 2001.01.
311. M. Furukawa Z. Horita and T.G. Langdon, Developing Ultrafine Grain Sizes Using Severe Plastic Deformation, Advanced Engineering Materials, 3, 3, 121-125, Vol.3 No. pp.121-125, 2001.01.
312. M. Furukawa Z. Horita M. Nemoto and T.G. Langdon, Processing of Metals by Equal-Channel Angular Pressing, J. Mater. Sci, Vol.36 No. pp.2835-2843, 2001.01.
313. T.G. Langdon M. Furukawa M. Nemoto and Z. Horita, Using Severe Plastic Deformation for Grain Refinement and Superplasticity, Materials Science Forum, 357-3, 489-498, Vol.357-359 No. pp.489-498, 2001.01.
314. M. Furukawa Z. Horita and T.G. Langdon, The Principles of Processing Using Severe Plastic Deformation: Applications to Aluminum Alloys, Advances in the Metallurgy of Aluminum Alloys Proc.of the James T. Staley Honorary Symposium on Aluminum Alloys, Vol. No. pp.47-56, 2001.01.
315. S. Komura M. Furukawa Z. Horita M. Nemoto and T.G. Langdon, Optimizing the Procedure of Equal-Channel Angular Pressing for Maximum Superplasticity, Materials Science and Engineering, 297, 1-2, 111-118, Vol.A297 No. pp.111-118, 2001.01.
316. T. Aida K. Matsuki Z. Horita and T.G. Langdon, Estimating the Equivalent Strain in Equal-Channel Angular Pressing, Scripta Materialia, 44, 4, 575-579, Vol.44 No. pp.575-579, 2001.01.
317. T. Fujita H. Ikeda S. Tanaka and Z. Horita, Construction of Ti-Al-Cr Phase Diagram Using Quantitative X-ray Microanalysis in Analytical Electron Microscope, J. Japan Inst. Metals, 65, 5, 382-388, Vol.65 No. pp.382-388, 2001.01.
318. S. Komura Z. Horita M. Furukawa M. Nemoto and T.G. Langdon, An Evaluation of the Flow Behavior during High Strain Rate Superplasticity in an Al-Mg-Sc Alloy, Metall. Mater. Trans, 32, 3A, 707-716, Vol.32A No. pp.707-716, 2001.01.
319. S.D. Terhune K. Oh-ishi Z. Horita T.G. Langdon anf T.R. McNelley, An Investigation of Grain Boundary Character Evolution during ECA Pressing of Pure Aluminum, Metall. Mater. Trans, Vol.33A No. pp.2173-2184, 2001.01.
320. T Fujita H.Hasegawa Z.Horita and T.G.Langdon, Diffusion in Ultrafine-Grained Al-Mg Alloys, Defect and Diffusion Forum, 194-1, 1205-1210, Vol.194-199 No. pp.1205-1210, 2001.01.
321. T.Fujita S.Komura Z.Horita and T.G.Langdon, Superplasticity of Ultrafine-grained Al-3%Mg-0.2%Sc Alloy Produced by Equal-Channel Angular Pressing, J. Japan Inst. Light Metals, Vol.50 No. pp.376-380, 2000.01.
322. M. Furukawa Z. Horita M. Nemoto and T.G. Langdon, Achieving Superplasticity at High Strain Rates Using Equal-Channel Angular Pressing, Materials Science and Technology, 16, 11-12, 1330-1333, Vol.16 No. pp.1330-1333, 2000.01.
323. M.Furukawa Z.Horita M.Nemoto and T.G.Langdon, Factors Influencing the Development of Ultrafine Grained Materials through Severe PlasticDeformation, Ultrafine Grained Materials, Vol. No. pp.125-134, 2000.01.
324. S. Komura Z. Horita M. Furukawa M. Nemoto and T.G. Langdon, Influence of Scandium on Superplastic Ductilities in an Al-Mg-Sc Alloy, J. Mater. Res., 15, 11, 2571-2576, Vol.15 No. pp.2571-2576, 2000.01.
325. T.Fujita M.Watanabe and Z.Horita, Modificaton of ζ-factor method for quantitative X-ray microanalysis in analytical electron microscopy, Inst. Phys. Conf. Ser. No 165: Symposium 3, 165, 141-142, Vol. No. pp.141-142, 2000.01.
326. T.G. Langdon M. Furukawa M. Nemoto and Z. Horita, Developing High Strain Rate Superplasticity through Grain Refinement, Proc. Inter. Conf. on Processing & Manufacturing of Advanced Materials (THERMEC-2000) filed in CD-ROM, Vol. No. pp.-, 2000.01.
327. W.Li B.Inkson Z. Horita and K.Xia, Microstructure Observations in Rare Earth Element Gd-Modified Ti-44at%Al, Intermetallics, 8, 5-6, 519-523, Vol.8 No. pp.519-523, 2000.01.
328. P.B.Berbon M.Furukawa Z.Horita M.Nemoto and T.G.Langdon, An Examination of the Deformation Process in Equal-Channel Angular Pressing, Mat. Res. Soc. Symp.Proc, Vol.601 No. pp.347-352, 2000.01.
329. Z. Horita M. Furukawa M. Nemoto A.J.Barnes and T.G. Langdon, Superplastic Forming at High Strain Rates after Severe Plastic Deformation, Acta. Mater, 48, 14, 3633-3640, Vol.48 No. pp.3633-3640, 2000.01.
330. Z. Horita M. Furukawa M. Nemoto and T.G. Langdon, Development of Fine-Grained Structures Using Severe Plastic Deformation, Materials Science and Technology, 16, 11-12, 1239-1245, Vol.16 No. pp.1239-1245, 2000.01.
331. Z. Horita T. Fujinami M. Nemoto and T.G. Langdon, Equal-Channel Angular Pressing of Commercial Aluminum Alloys: Grain Refinement Thermal Stability and Tensile Properties, Metall. Mater. Trans, 31, 3, 691-701, Vol.A No. pp.691-701, 2000.01.
332. M.Murayama K.Hono and Z.Horita, Dissolution of the θPrecipitates in an Al-1.7at%Cu Alloy Deformed by Equal-Channel Angular Pressing, Ultrafine Grained Materials, Vol. No. pp.145-153, 2000.01.
333. M.Furukawa M.Nemoto Z.Horita and T.G.Langdon, Processing by Equal-Channel Angular Pressing: Potential for Achieving Superplasticity, Mat. Res. Soc. Symp. Proc., Vol..601 No. pp.365-370, 2000.01.
334. K. Fujiwara and Z.Horita, Measurements of Interdiffusion Coefficients and Intrinsic Diffusion Coefficients in Ni3Al, Bull. Japan Inst. Metals (Materia Japan)., Vol.39 No. pp.507-510, 2000.01.
335. Z.Horita M.Furukawa M.Nemoto and T.G.Langdon, Grain Refinement of Aluminum Using Equal-Channel Angular Pressing, Mat. Res. Soc. Symp. Proc., 601, 311-322, Vol.601 No. pp.311-322, 2000.01.
336. D.Yamaguchi Z.Horita T.Fujinami M.Nemoto and T.G.Langdon, Factors Affecting Grain Refinement in Equal-Channel Angular Pressing, Materials Science Forum, 331-3, 607-612, Vol.331-337 No. pp.607-612, 2000.01.
337. Z.Horita M.Furukawa M.Nemoto R.Z.Valiev and T.G.Langdon, Characterization of Ultrafine-Grained Structures Produced by Severe Plastic Deformation, Investigations and Applications of Severe Plastic Deformation, 80, 155-162, Vol. No. pp.155-162, 2000.01.
338. A. Yamashita D. Yamaguchi Z. Horita and T.G. Langdon, Influence of pressing temperature on microstructural development in equal-channel angular pressing, Materials Science and Engineering, 287, 1, 100-106, Vol.A 287 No. pp.100-106, 2000.01.
339. K. Nakashima Z. Horita M. Nemoto and T.G. Langdon, Development of a Multi-Pass Facility for Equal-Channel Angular Pressing to High Total Strains, Materials Science and Engineering, 281, 1-2, 82-87, Vol.A281 No. pp.82-87, 2000.01.
340. K. Oh-ishi H. Kumamoto Z. Horita and M. Nemoto, Phase Separation in TiAl(L10)-(Al Cr)3Ti(L12) System, J. Japan Inst. Metals, 64, 8, 609-615, Vol.64 No. pp.609-615, 2000.01.
341. S. Lee H. Akamatsu A. Utsunomiya K. Neishi M. Furukawa Z. Horita and T.G. Langdon, Superplasticity of Ultrafine-Grained Al-Mg-Sc Alloys Produced by Equal-Channel Angular Pressing, Proc. Inter. Conf. on Processing & Manufacturing of Advanced Materials (THERMEC-2000) filed in CD-ROM, Vol. No. pp.-, 2000.01.
342. T. Fujita Z. Horita and T.G. Langdon, Diffusivity Measurements in Ultrafine-Grained Al-Mg Alloys Produced by Equal-Channel Angular Pressing, Proc. Inter. Conf. on Processing & Manufacturing of Advanced Materials(THERMEC-2000) filed in CD-ROM, Vol. No. pp.-, 2000.01.
343. T. Fujita and Z. Horita, SIM Observation of Ultrafine-Grained Al Alloy after Superplastic Deformation, Bull. Japan Inst. Metals (Materia Japan), Vol.39 No. pp.984-984, 2000.01.
344. T.G.Langdon M.Furukawa Z.Horita and M.Nemoto, Microstructural Evolution during Processing by Severe Plastic Deformation, Investigations and Applications of Severe Plastic Deformation, Vol. No. pp.149-154, 2000.01.
345. M.Nemoto and Z.Horita, Rotation of Mo Fibers in Directionally Solidified Ni-Al-Mo Eutectic Alloys, Interface Science, 7, 2, 119-129, Vol.7 No. pp.119-129, 1999.01.
346. P.B.Berbon M.Furukawa Z.Horita M.Nemoto and T.G.Langdon, Influence of pressing speed on microstructural development in equal-channel angular pressing, Metall. Mater. Trans, 30, 8, 1989-1997, Vol.A 30A No. pp.1989-1997, 1999.01.
347. Z.Horita S.Komura P.B.Berbon A.Utsunomiya M.Furukawa M.Nemoto and T.G.Langdon, Superplasticity of ultrafine-grained aluminum alloys processed by equal-channel angular pressing, Materials Science Forum, 304-3, 91-96, Vol.304-306 No. pp.91-96, 1999.01.
348. D.Yamaguchi Z.Horita M.Nemoto and T.G.Langdon, Significance of Adiabatic Heating in Equal-Channel Angular Pressing, Scripta Materialia, 41, 8, 791-796, Vol.41 No. pp.791-796, 1999.01.
349. H.Hasegawa S.Komura A.Utsunomiya Z.Horita M.Furukawa M.Nemoto and T.G.Langdon, Thermal stability of ultrafine-grained alumimnum in the presence of Mg and Zr additions, Mater. Sci. Eng, 265, 1-2, 188-196, Vol.A265 No. pp.188-196, 1999.01.
350. T.Fujita M.Watanabe Z.Horita and M.Nemoto, Advanced form of ζ-factor method in analytical electron microscopy, J. Electron Microscopy, 48, 5, 561-568, Vol.48 No. pp.561-568, 1999.01.
351. K.Fujiwara M.Watanabe Z.Horita M.Nemoto K.Noumi and T.Simozaki, Measurments of Intrinsic Diffusion Coefficients in Ni3Al, Proceedings of the Inter. Conf. on Solid-Solid Phase Transformations ’99(JIMIC-3), 481-484, Vol. No. pp.481-484, 1999.01.
352. S.Komura Z.Horita M.Nemoto and T.G.Langdon, Influence of Stacking Fault Energy on Microstructural Development in Equal-Channel Angular Pressing, J. Mater Res., 14, 10, 4044-4050, Vol.14 No. pp.4044-4050, 1999.01.
353. M.Nemoto Z.Horita M.Furukawa and T.G.Langdon, Microstructural evolution for superplasticity using equal-channel angular pressing, Materials Science Forum, 304-3, 59-66, Vol.304-306 No. pp.59-66, 1999.01.
354. S.Lee P.B.Berbon M.Furukawa Z.Horita M.Nemoto N.K.Tsenev R.Z Valiev and T.G.Langdon, Developing Superplastic Properties in an Aluminum Alloy through Sever Plastic Deformation, Mater. Sci. Eng., 272, 1, 63-72, Vol.A272 No. pp.63-72, 1999.01.
355. M.Murayama K.Hono and Z.Horita, Microstructural Evolution in an Al-1.7at%Cu Alloy Deformed by Equal-channel Angular pressing, Mater. Trans. JIM, 40, 9, 938-941, Vol.40 No. pp.938-941, 1999.01.
356. M.Furukawa K.Oh-ishi S.Komura A.Yamashita Z.Horita M.Nemoto and T.G.Langdon, Optimization of microstructure for superplasticity using equal-channel angular pressing, Materials Science Forum, 304-3, 97-102, Vol.304-306 No. pp.97-102, 1999.01.
357. K.Oh-ishi Z.Horita D.J.Smith R.Z.Valiev M.Nemoto and T.G.Langdon, Fabrication and Thermal Stability of a Nanocrystalline Ni-Al-Cr Alloy: Comparison with Pure Cu and Ni, J. Mater Res., 14, 11, 4200-4207, Vol.14 No. pp.4200-4207, 1999.01.
358. P.B.Berbon S.Komura A.Utsunomiya Z.Horita M.Furukawa M.Nemoto and T.G.Langdon, An evaluation of superplasticity in aluminum-scandium alloys processed by equal-channel angular pressing, Mater. Trans. JIM, 40, 8, 772-778, Vol.40 No. pp.772-778, 1999.01.
359. K.Oh-ishi E.Tsutsumi Z.Horita and M.Nemoto, Coarsening Behavior of Cr Precipitates in B2-Ordered NiAl, Proceedings of the Inter. Conf. on Solid-Solid Phase Transformations 99(JIMIC-3), 177-180, Vol. No. pp.177-180, 1999.01.
360. Z.Horita M.Furukawa M.Nemoto and T.G.Langdon, Microstructural control for high strain rate superplasticity using equal-channel angular pressing, Proceedings of PLASTICITY 99: The seventh International Symposium on Plasticity and ItsCurrent Applications, Vol. No. pp.1001-1004, 1999.01.
361. Z.Horita M.Furukawa K.Oh-ishi M.Nemoto and T.G.Langdon, Equal-Channel Angular Pressing for Grain Refinement of Metallic Materials, The 4th International Conference on Recrystallization and Related phenomena ReX99, Vol.10 No. pp.301-308, 1999.01.
362. Z.Horita M.Furukawa M.Nemoto and T.G.Langdon, Equal-channel angular pressing for improving the strength and ductility of metallic materials, Progress in Mechanical Behaviour of Materials Proc. 8th International Conference on the Mechanical Behaviour of Materials (ICM8), 737-742, Vol.II No. pp.737-742, 1999.01.
363. S.D.Terhune Z.Horita M.Nemoto Y.Li T.G.Langdon and T.R.McNelley, The Evolution of Microstructure and Grain Boundary Character during ECA Pressing of Pure Aluminum, The 4th International Conference on Recrystallization and Related phenomena ReX99, Vol.10 No. pp.515-522, 1999.01.
364. Z.Horia and M.Watanabe, Chemical composition analysis for interfaces by analytical electron microscopy, 9th CIMTEC World Forum on New Materials Symposium II Surface and Near-Surface Analysis of Materials, Vol. No. pp.71-82, 1999.01.
365. M.Furukawa Z Horita M.Nemoto and T.G.Langdon, The Relation between Microstructural Stability and Superplasticty in Aluminum Alloys Processed by Equal-channel angular pressing, Proc.the International Symposium on Light Metals, Vol. No. pp.583-592, 1999.01.
366. M.Furukawa Z.Horita M.Nemoto and T.G.Langdon, The Relation between Microstructural Stability and Superplasticity in Aluminum Alloys Processed by Equal-channel angular pressing, Proc. the International Symposium on Light Metals, Vol. No. pp.583-592, 1999.01.
367. S.Komura P.B.Berbon M.Furukawa Z.Horita M.Nemoto and T.G.Langdon, High strain rate superplasticity in an Al-Mg alloy containing scandium, Scripta Mater, 38, 12, 1851-1856, Vol.38 No. pp.1851-1856, 1998.01.
368. T.G.Langdon M.Furukawa Z. Horita and M.Nemoto, Using intense plastic straining for high-strain-rate superplasticity, JOM, 50, 6, 41-45, Vol.50 June No. pp.41-45, 1998.01.
369. P.B.Berbon M.Furukawa Z.Horita M.Nemoto N.K.Tsenev R.Z Valiev and T.G.Langdon, Requirments for achieving high-strain-rate superplasticity in cast aluminum alloys, Phil. Mag. Lett, Vol.74 No. pp.313-318, 1998.01.
370. Z.Horita T.Fujinami M.Nemoto and T.G.Langdon, Microstructures and mechanical properties of submicrometer-grained Al alloys produced by equal-channel angular pressing, Proceedings of the 6th International Conference on Aluminum Alloys (ICAA-6), Vol.1 No. pp.449-454, 1998.01.
371. Y.Iwahashi Z.Horita M.Nemoto and T.G.Langdon, The processing of ultrafine-grained materials using equal-channel angular pressing, Processing and Fabrication of Advanced Materials VI, 3-14, Vol. No. pp.3-14, 1998.01.
372. Y.Iwahashi M.Furukawa Z. Horita M.Nemoto and T.G.Langdon, Microstructural characteristics of ultrafine-grained aluminum produced using equal-channel angular pressing, Metall. Mater.Trans. A, 29, 9, 2245-2252, Vol.29A No. pp.2245-2252, 1998.01.
373. Y.Ootoshi K.Fujiwara Z.Horita and M.Nemoto, Formation of Ni5Al3 Phase in Ni3Al/NiAl Diffuson Couples, Mater. Trans. JIM, 39, 1, 225-229, Vol.39 No. pp.225-229, 1998.01.
374. S.Tanaka M.Watanabe Z.Horita and M.Nemoto, Application of ζ-factor method to Ti-Al-Cr system in analytical electron microscopy, J.Electron Microscopy, 47, 1, 9-15, Vol.47 No. pp.9-15, 1998.01.
375. K.Nakashima Z. Horita M.Nemoto and T.G.Langdon, Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing, Acta Mater., 46, 5, 1589-1599, Vol.46 No. pp.1589-1599, 1998.01.
376. Z.Horita M.Watanabe and M.Nemoto, Energy dispersive X-ray microanalysis in analytical electron microscopy, Proceedings of the Asian Science Seminar on New Direction in Transmission ElectronMicroscopy and Nano-Characterization of Materials, Vol. No. pp.209-221, 1998.01.
377. Y.Iwahashi Z. Horita M.Nemoto and T.G.Langdon, The process of grain refinement in equal-channel angular pressing, Acta Mater., 46, 9, 3317-3331, Vol.46 No. pp.3317-3331, 1998.01.
378. N.Komai M.Watanabe Z.Horita T.Sano and M.Nemoto, Analytical electron microscopy study of Ni/Ni-8mol%Ti diffusion-couple, Acta Mater., 46, 12, 4443-4451, Vol.46 No. pp.4443-4451, 1998.01.
379. K.Fujiwara Z.Horita and M.Nemoto, Growth of Ni3Al in Ni/NiAl diffusion couples, Proceedings of the Third Pacific Rim International Conference on Advanced Materials and Processing, Vol. No. pp.1251-1256, 1998.01.
380. H.Hasegawa S.Komura Z.Horita M.Furukawa M.Nemoto and T.G.Langdon, Grain refinement and potential for superplasticity in Al Alloys containing small particles, Proceedings of the Third Pacific Rim International Conference on Advanced Materials and Processing, Vol. No. pp.1873-1879, 1998.01.
381. M.Furukawa P.B.Berbon Z. Horita M.Nemoto N.K.Tsenev R.Z. Valiev and T.G.Langdon, Age hardening and the potential for superplasticity in a fine-grained Al-Mg-Li-Zr alloy, Metall. Mater.Trans, 29, 1, 169-177, Vol.29A No. pp.169-177, 1998.01.
382. M.Furukawa Y.Iwahashi Z.Horita M.Nemoto and T.G.Langdon, The shearing characteristics associated with equal-channel angular pressing, Mater. Sci. Eng, 257, 2, 328-332, Vol.257A No. pp.328-332, 1998.01.
383. M.Nemoto Z.Horita M.Furukawa and T.G.Langdon, Equal-channel angular pressing: a novel tool for microstructural control, Metals and Materials, 4, 6, 1181-1190, Vol.4 No. pp.1181-1190, 1998.01.
384. M.Furukawa Y.Ma Z. Horita M.Nemoto R.Z.Valiev and T.G.Langdon, Microstructural characteristics and superplastic ductility in a Zn-22%Al alloys with submicrometer grain size, Mater.Sci. Eng., 241, 1-2, 122-128, Vol.A241 No. pp.122-128, 1998.01.
385. M.Furukawa Z. Horita M.Nemoto R.Z. Valiev and T.G.Langdon, Factors influencing the flow and haedness of materials with ultrafine grain size, Phil. Mag, 78, 1, 203-215, Vol.A 78 No. pp.203-215, 1998.01.
386. P.B.Berbon N.K.Tsenev R.Z Valiev M.Furukawa Z.Horita M.Nemoto and T.G.Langdon, Fabrication of bulk ultrafine-grained materials through intense plastic straining, Metall. Mater. Trans A, 29, 9, 2237-2243, Vol.29A No. pp.2237-2243, 1998.01.
387. S.Komura A.Utsunomiya Z.Horita M.Nemoto M.Furukawa P.B.Berbon and T.G.Langdon, Ultrafine-grained structure produced by equal-channel angular pressing (in Japanese), Bull. Japan Inst. Metals (Materia Japan), Vol.37 No. pp.376-376, 1998.01.
388. M.Furukawa Z.Horita M.Nemoto and T.G.Langdon, Microstructural Evolution in Pure Aluminum during Equal-Channel Angular Pressing, Modeling the Mechanical Response of Structural Materials, Vol. No. pp.165-172, 1998.01.
389. K.Oh-ishi Z.Horita M.Furukawa M.Nemoto and T.G.Langdon, Optimizing the Rotation Conditions in Equal-Channel Angular Pressing, Metall. Mater.Trans, Vol.29A No. pp.2001-2013, 1998.01.
390. Z. Horita H.Yoshinaga and T.G. Langdon, A New Analytical Procedure for the Identification of High Temperature Deformation Mechanisms Using the Strain Rate Change Test, Materials Transactions, 32, 4, 339-344, Vol.JIM 32 No. pp.339-344, 1991.01.
391. Z. Horita T. Sano and M. Nemoto, Effect of Contamination on Quantitative X-ray Microanalysis in the Analytical Electron Microscope, Philosophical Magazine, 63, 4, 965-978, Vol.B63 No. pp.965-978, 1991.01.
392. Z. Horita T. Sano and M. Nemoto, A New Form of the Extrapolation Method for Absorption Correction in Quantitative X-ray Microanalysis with the Analytical Electron Microscope, Ultramicroscopy, 35, 1, 27-36, Vol.35 No. pp.27-36, 1991.01.
393. Z. Horita H.Yoshinaga and T.G. Langdon, Creep Behavior of Pure Aluminium and Aluminium-Magnesium Solid Solution Alloys, Hot Deformation of Aluminium Alloys, Vol. No. pp.211-222, 1991.01.
394. Z. Horita R. Nishimachi T. Sano and M. Nemoto, Point-Analysis Using the Extrapolation Method in the Analytical Electron Microscope, Proceedings of the 12th International Congress for Electron Microscopy, Vol.2 No. pp.430-431, 1990.01.
395. Y. Wakaki Y. Otuska Z. Horita M. Nishimura T. Sano Y. Murata and M. Nemoto, Cross-Sectional Examination of Surface Layers on Electropolished Thin Specimens, Microbeam Analysis, Vol.1990 No. pp.323-326, 1990.01.
396. Z. Horita I. Yoshinaga T. Fujinami T.Sano and M. Nemoto, Application of Analytical Electron Microscopy to Diffusivity Measurment Requiring X-ray Absorption Correction, Philosophical Magazine Letters, 62, 5, 365-370, Vol.62 No. pp.365-370, 1990.01.
397. Z. Horita T. Sano and M. Nemoto, Energy Dispersive X-Ray Microanalysis in the Analytical Electron Microscope, ISIJ International, 29, 3, 179-190, Vol.29 No. pp.179-190, 1989.01.
398. Z. Horita K. Ichitani T. Sano and M. Nemoto, Applicability of the Differential X-Ray Absorption Method to the Determinations of Foil Thickness and Local Composition in the Analytical Electron Microscope, Philosophical Magazine, 59, 5, 939-952, Vol. A 59 No. pp.939-952, 1989.01.
399. Z. Horita T. Sano and M. Nemoto, Technique and Application of Quantitative Energy Dispersive X-Ray Microanalysis in the Analytical Electron Microscope, Bulletin of the Japan Institute of Metals, Vol.28 No. pp.742-152, 1989.01.
400. Z. Horita K. Ichitani T. Sano and M. Nemoto, Detemination of Local Thickness and Composition in the Analytical Electron Microscope, Proceedings of the 9th European Congress on Electron Microscopy Institute of Physics Conference Series Number 93, 93, 155-156, Vol. No. pp.155-156, 1988.01.
401. Y. Ma Z. Horita and T.G. Langdon, The Magnitude of the Internal Stress in a Superplastic Pb-62%Sn Alloy, Strength of Metals and Alloys (ICSMA 8), Vol.1 No. pp.397-402, 1988.01.
402. Z. Horita and T.G. Langdon, A Modification of the Stress and Strain Transient Dip Tests for Measurements of Internal Stress, Proceedings of the Third International Conference on Creep and Fracture of Engineering Materials and Structures, Vol. No. pp.71-84, 1987.01.
403. Z. Horita T. Shimada T. Endo and T.G. Langdon, The Creep Behavior of Al-Mg Solid Solution Alloys at High Stresses, Proceedings of the Third International Conference on Creep and Fracture of Engineering Materials and Structures, Vol. No. pp.113-126, 1987.01.
404. Z. Horita T. Sano and M. Nemoto, Simplification of X-Ray Absorption Correction in Thin-Sample Quantitative Microanalysis, Ultramicroscopy, 21, 3, 271-276, Vol. 21 No. pp.271-276, 1987.01.
405. Z. Horita K. Sakamoto W.H. Tian H. Miyazaki T. Sano and M. Nemoto, Determination of the Absorption Free Cliff-Lorimer Factor Using the Extrapolation Method, Proceedings of the 11th International Congress on Electron Microscopy, Vol.1 No. pp.559-560, 1986.01.
406. Y.Ma M.Furukawa Z.Horita M.Nemoto R.Z.Valiev and T.G.Langdon, Significance of microstructural control for superplastic deformation and forming, Mater.Trans.JIM, 37, 3, 336-339, Vol.37 No. pp.336-339, 1986.01.
407. Z. Horita T. Sano and M. Nemoto, Identification of Fine Precipitate Particles in Unidirectionally Solidified Ni-Al-Mo Eutectic Alloys by Means of EDX and SAD Analyses, Acta Metallurgica, 34, 8, 1525-1531, Vol.34 No. pp.1525-1531, 1986.01.
408. Z. Horita K. Ichitani T. Sano and M. Nemoto, Minimization of the Overestimation of Thin Foil Thickness in the Contamination Spot Separation Method, Scripta Metallurgica, 20, 3, 381-384, Vol.20 No. pp.381-384, 1986.01.
409. Z. Horita H. Miyazaki T. Sano and M. Nemoto, An Extrapolation Method for the Absorption Correction in, Proceedings of the 11th International Congress on Electron Microscopy, Vol.1 No. pp.561-562, 1986.01.
410. Z. Horita T. Sano and M. Nemoto, Determination of the Absorption-Free kANi Factors for Quantitative Microanalys of Nickel Base Alloys, Journal of Electron Microscopy, 35, 4, 324-334, Vol.35 No. pp.324-334, 1986.01.
411. Z. Horita T. Sano and M. Nemoto, An Extrapolation Method for the Determination of Cliff-Lorimer kAB Factors at Zero Foil Thickness, Journal of Microscopy, 143, 215-231, Vol.143 No. pp.215-231, 1986.01.
412. Z.Horita and T G.Langdon, High-Temperature Creep of Al-Mg Alloys, Strength of Metals and Allyos(ICSMA7), Vol. No. pp.797-802, 1985.01.
413. Z.Horita and T G.Langdon, The Significance of the Universal Third Power Stress Dependence for the Steady -State Creep Rate, Proceedings of the Secand International Conference on Creep and Fracture of Engineering Materials and Structures, Vol. No. pp.75-87, 1984.01.
414. Z.Horita and T G.Langdon, The Universal Nature of the Third Power Stress Dependence for steady -State Creep, Scripta Metallurgica, Vol.17 No. pp.665-670, 1983.01.
415. Z.Horita and T G.Langdon, The Creep Behavior of a Commercial Al-5%Mg-0.25%Fe(5083)Alloy, Deformation of Multi-Phase and Particle Containig Materials, Vol. No. pp.307-312, 1983.01.
416. H.Yoshinaga Z.Horita and H.Kurishita, Determination of High-Temperature Deformation Mechanism in Crystalline Materials by the Strain -Rate Change Test, Acta Metallurgica, 29, 11, 1815-1824, Vol.29 No. pp.1815-1824, 1981.01.
417. Z. Horita and H. Yoshinaga, Separate Determination of Work-Hardening and Softening Rates during High Temperatur Deformation of Pure Aluminum, Journal of the Japan Institute of metals, 44, 11, 1273-1281, Vol.44 No. pp.1273-1281, 1980.01.
418. Zenji Horita, Severe Plastic Deformation of Alloys: Microstructure and Mechanical Performance, Fundamental Issues on Plastic Deformation of Metals and Alloys Summer School for Graduate Students, Vol. No. pp.-.
419. K. Neishi Z. Horita and T. G.Langdon, Grain Refinement and Superplastic Properties of Cu-Zn Alloys Processed by Equal-Channel Angular Pressing, Nano SPD2, Vol. No. pp.-.
420. Z. Horita K. Matsubara Y. Miyahara and T. G.Langdon, Production of Superplastic Mg Alloys Using Severe Plastic Deformation, Nano SPD2, Vol. No. pp.-.

九大関連コンテンツ