| Eiji Inoue | Last modified date：2013.5.14 |
Graduate School
Undergraduate School
Administration Post
Other
E-Mail
Homepage
[URL].
Phone
092-642-2927
Fax
092-642-2932
Academic Degree
PhD
Field of Specialization
Agricultural Machinery
Outline Activities
Outline of research
1.In this study, vibration charcteristics is investigated theoretically in order to reduce vibaration of farm machineries. In paritcular,vibration characteristics of driving,threshing and cutting section for combine harvester with a great number of vibration source is investigated through the numerical analyses based on the mechanical model and measurement of the 6 degrees of freedom of vibration acceleration. In addition, vibration analysis and identification of optimum design parameters for half tracked tractor are cunducted in order to improve driving speed.
2.The objectives of this study are to reduce grain loss and improve the separation of grain from chaff by controlling the threshing operation. First, a counting sensor with a piezoelectric element is attached inside the grain tank of a head-feedinn combine in order to monitor the grain feed rate in haravesting operations. Moreover,flying simulation of grains of paddy is performed through the dynamic movement equation based on hydrodynamics, and distributions of the wind velocities and directions are analized by FVM analysis. Recently,investigation of impact threshing begins in order to improve the threshing efficiencies.
3.ANC system is used for reducing noize level of head feeding combine cabin.
4.Safety system is constructed by sensor units system for reduching accident of agriculture operation.
Education
1.Not only knowledge of agriculture and bio-science but also jeneral knowledge of mechanical engineering is needed for design & development of farm machineries. So, the lectures of machinery design theory,internal combustion engine engineering, hydromechanics, vibration engineering and intelligence engeneering are conducted for graduate students.
Social activities
1.Collaboration with agricultural machineriy and rubber crawler companies is performed in order to improve the farm machineries efficiency and construction of design theories for new machine development.
1.In this study, vibration charcteristics is investigated theoretically in order to reduce vibaration of farm machineries. In paritcular,vibration characteristics of driving,threshing and cutting section for combine harvester with a great number of vibration source is investigated through the numerical analyses based on the mechanical model and measurement of the 6 degrees of freedom of vibration acceleration. In addition, vibration analysis and identification of optimum design parameters for half tracked tractor are cunducted in order to improve driving speed.
2.The objectives of this study are to reduce grain loss and improve the separation of grain from chaff by controlling the threshing operation. First, a counting sensor with a piezoelectric element is attached inside the grain tank of a head-feedinn combine in order to monitor the grain feed rate in haravesting operations. Moreover,flying simulation of grains of paddy is performed through the dynamic movement equation based on hydrodynamics, and distributions of the wind velocities and directions are analized by FVM analysis. Recently,investigation of impact threshing begins in order to improve the threshing efficiencies.
3.ANC system is used for reducing noize level of head feeding combine cabin.
4.Safety system is constructed by sensor units system for reduching accident of agriculture operation.
Education
1.Not only knowledge of agriculture and bio-science but also jeneral knowledge of mechanical engineering is needed for design & development of farm machineries. So, the lectures of machinery design theory,internal combustion engine engineering, hydromechanics, vibration engineering and intelligence engeneering are conducted for graduate students.
Social activities
1.Collaboration with agricultural machineriy and rubber crawler companies is performed in order to improve the farm machineries efficiency and construction of design theories for new machine development.
Research
Research Interests
Membership in Academic Society
- Improvement of Safety for Agricultural Machinery
keyword : Safety,MEMS Sensor,SST,SI,PSD,Agricultural Machinery Operation
2011.04～2011.04. - Study on modeling and optimum condition of cleaning system for combine harvesterl
keyword : tailings return, grain loss, DEM
2010.04～2013.03. - Study on the impact threshing of the rice(paddy)
keyword : Paddy, Strengh of grain with rachis-branch, Impact, threshing
2003.04. - Study on the vibrarion characteristic of the half tracked tractor
keyword : Half tracked, Dynamic model, Arrangement of track rollers, Wavelet analysis, High running velocity,
2003.04. - Study on the high speed stability and reduction of vibrarion for the agricultural rubber crawler vehicle.
keyword : Rubber craler, Arrangement of track rollers, Spring constant, Motion equation, Identification of parameters
2001.04. - Theoretical Investigation of Cleaning Mechanism in Threshing Section of the Head-feeding Combine, and application of Cleaning Control.
keyword : Cleaning wind, Grain loss, Motion equation, Analysis of FVM, Measurement of PIV
2000.04.
Reports
| 1. | Numerical Analysis of Cleaning Wind Based on Turbulence Model. |
| 2. | Transient Response of Receptacle Temperature of Thermogenic Plant, Lotus Flower, to Changes Ambient Temperature. . |
| 3. | Investigation and Evaluation of Impact Threshing Mechanism. |
| 4. | Tracer Research of Crop's Physical Properties and Utilization of Crop's Color During Paddy Rice Harvest Season UEKA,I., INOUE, E., HIRAI, Y., MATSUI, M., KAI, Y., MORI, K., HASHIGUCHI, K. Journal of the Kyushu Branch of Agricultural Machinery. |
| 5. | Analysis of Time-Series for the Vibration Acceleration at the Cutting Section of the Head-Feeding Combine INOUE, E., TAKASE, A., HIRAI, Y., MATSUI, M., HASHIGUCHI, K., MORI, K., TASHIRO, K. Journal of the Kyushu Branch of Agricultural Machinery. |
| 6. | Identification of Dynamic Parameters of the Rubber Crawler System for Farm Machinery INOUE, E., KONYA, H., HIRAI, Y., NOGUCHI, R. Journal of the Kyushu Branch of Agricultural Machinery. |
| 7. | HiRAI, Y., INOUE, E., HASHIGUCHI, K., CHOE J, Seob, OKAYASU, T.,KUWANO, T.,Examination of Mechanical Model for Crop Stalk in Harvesting,Vol.49, 7-11,Journal of Kyushu Branch of the Japanese Society of Agricultural Machinery,2000.12. |
Papers
| 1. | Jung Seob CHOE, Mitsuoka Muneshi, Eiji Inoue, Takashi OKAYASU, Hirai Yasumaru, Tae Wook KIM, Soon Goo KWON, Jong Min PARK,Measuring Inclination Angle of Semi-crawler Tractors Using MEMS Sensor. ,J.Fac.Agr.,Kyushu Univ.,Vol.Vol.58,No.No.1,2013.02. |
| 2. | Jung Seob CHOE, Eiji Inoue, Mitsuoka Muneshi, Takashi OKAYASU, Hirai Yasumaru,Stastical Analysis of Threshing Characteristics of Impact-type Rice Plant Threshing Device.,J.Fac.Agr.,Kyushu Univ.,Vol.Vol.58,No.No.1,2013.03. |
| 3. | Moses F.Oduori, Thomas O.Mbuya, Jun Sakai, Eiji Inoue,Modeling of crop stem deflection in the context of combine harvester reel design and operation. ,CIGR Journal,Vol.Vol.14,No.No.2,pp.１～１７,2012.06. |
| 4. | Inoue E., Mitsuoka M., Rabbani M. ,Investigation of Nonlinear Vibration Characteristics of Agricultural Rubber Crawler Vehicles,AMA-AGRICULTURAL MECHANIZATION IN ASIA AFRICA AND LATIN AMERICA,Vol.vol.42,No.No.1,pp.89-93,2011.05. |
| 5. | M.A. Rabbani, T. Tsujimoto, M. Mitsuoka, E. Inoue, T. Okayasu.,Prediction of the vibration characteristics of half-traced tractor condering a three-dimensional dynamic model,Biosystems Enginering,Vol.vol.110,No.2,pp.178-188,2011.09. |
| 6. | Eiji Inoue, Muneshi Mitsuoka, Ma Rabbani,Investigation of Nonlinear Vibration Characteristics of Agricultural Rubber Crawler Vehicles ,Agricultural Mechanization in Asia, Africa and Latin America,Vol.Vol.42,No.No.1,pp.89-93,2011.01. |
| 7. | MA RABBANI, Susumu TAKEOKA, Muneshi MITSUOKA, Eiji INOUE, Takeshi FUKUSHIMA and Takeshi OKAYASU,Simulation for Vertical Dynamic Loading Forces on Track Rollers of the Half-tracked Tractor Based on Nonlinear Voigt's Model ,Engineering in Agriculture Environment and Food (EAEF),Vol.Vol.3 ,No.No.4,pp.119-126,2010.11. |
| 8. | MITSUOKA Muneshi, INABA Shigeki, INOUE Eiji, FUKUSHIMA Takashi, OKAYASU Takashi, MORI Keni,Dynamic Model of an Agricultural Rubber Crawler Vehicle with Nonlinear Spring (Part 1)-Investigation of the Nonlinear Interaction Between a Track Roller and an Agricultural Rubber Crawler-,Journal of the JAPANESE SOCIETY of AGRICULTURAL MACHINERY,Vol.70, No.5, 48-54,2008.09. |
| 9. | MITSUOKA Muneshi, INABA Shigeki, INOUE Eiji, FUKUSHIMA Takashi, HARA Sadahiro, OkAYASU Takashi, MORI Ken,Prediction and Evaluation of Vibration Characteristics of an Agricultural Rubber Crawler Vehicle Equipped with Movable Track Rollers,Journal of the Japanese Society of Agricultural Machinery,Vol.70, No.5, 41-47,2008.09. |
| 10. | FURUNO Yuko, MATSUI Masami, INOUE Eiji, MORI Ken, OKAYASU Takashi, FUKATA Ryusuke,Study on the Air Drag of Grains,Journal of the JAPANESE Society of Agricultural Machinery,Vol.70, No.3, 58-64,2008.03. |
| 11. | Development of Techniques to Reduce Combine Header Losses in Soybeans(Part 4)ーＡ Ｖｅｒification Test for Evaluating Reduction of Header Loss Using an Experimental Cutter Bar- . |
| 12. | FURUNO Yuko, MATSUI Masami, INOUE Eiji, MORI Ken, OKAYASU Takashi, FUKATA Ryusuke,Analysis of Winnow Mechanism on the Basis of Particle-Particle/Particle-Airflow Interaction(Part 1),Journal of the JAPANESE SOCIETY of AGRICULTURAL MACHINERY,Vol.70, No.1, 65-71,2008.01. |
| 13. | Devlopment of a Technique to Reduce Combine Header Losses in Soybeans(Part 3). |
| 14. | Development of a Technique to Reduce Combine Header Losses in Soybeans(Part 2). |
| 15. | Development of a Technique to Reduce Combine Header Losses in Soybeans(Part 1) . |
| 16. | Vibration Model and Evaluation of the Half-Tracked Tractor in Consideration of Rolling Resistance FUKUSHIMA,T.,OKADA,J.,INOUE,E.,MITSUOKA,M.,INABA,S.,OKAYASU,T. Journal of the Japanese Society of Agricultural Machinery. |
| 17. | FUKUSHIMA,T.,INOUE,E.,MITSUOKA,M.,MATSUI,M.,OKAYASU,T.,Vibration Characteristics and Modeling of Knife Driving System of Combine Harvester(Part3)-A Dynamic Model of the Knife Driving System-,Journal of the Japanese Society of Agricultural Machinery,Vol.68,No.5,65-70,2006.09. |
| 18. | FUKUSHIMA,T.,INOUE,E.,MITSUOKA,M.,MATSUI,M.,OKAYASU,T.,Vibration Characteristics and Modeling of Knife Driving System of Combine Harvester(Part2)-Recurrence Plots and Trajectory Considering Frequency Components-,Journal of the Japanese Society of Agricultural Machinery,Vol.68,No.5,59-64,2006.09. |
| 19. | FUKUSHIMA,T.,INOUE,E.,MITSUOKA,M.,MATSUI,M.,OKAYASU,T.,Vibration Characteristics and Modeling of Knife Driving System of Combine Harvester(Part1)-Frequency Resolution of Time Series by Wavelet Analysis-,Journal of the Japanese Society of Agricultural Machinery,Vol.68,No.5,52-58,2006.09. |
| 20. | Simulation of the Flying Range of Straw Acting the Cleaning Wind FURUNO,Y.,MATSUI,M.,INOUE,E.,MORI,K.,OKAYASU,T. Journal of the Japanese Society of Agricultural Machinery. |
| 21. | TSUJIMOTO, T., SAKURAI, H., HASHIGUCHI, K., INOUE, E.,Study on the Development of Agricultural Machine for Small-Scale Farmers,Part2,Agricultural Mechanization in Asia, Africa and Latin America,Vol.36, No.2, 14-20,2005.09. |
| 22. | INOUE, E., MITSUOKA, M., HARA, S., KONYA, H., MORI, K.,Identification of Parameters of the Agricultural Rubber Crawler Vehicle by Using the Measured Dynamic Loading Forces Acting on the Track Rollers.,Journal of the Japanese Society of Agricultural Machinery,Vol.66, No.6(in press),2004.11. |
| 23. | Numerical Analysis of Cleaning Wind in a Winnowing Chamber of Combine Harvester using the Finite Volume Method. MATSUI, M., INOUE, E., MORI, K., FURUNO, Y., HIRAI, Y. Journal of the Japanese Society of Agricultural Machinery. |
| 24. | OZAKI, A., MORI, K., INOUE, E., HARAGUCHI, T.,The Impacts of Aquatic Plants on Entrainment Phenomena Based on Wind-induced Flow in a Closed Density Stratified Water Area.,Journal of the International Society of Paddy and Water Environment Engineering.,in press,2004.11. |
| 25. | Vibration Characteristics and Identification of Dynamic Parameters of the Agricultural Rubber CrawlerVehicle MITSUOKA, M., INOUE, E., HARA, S., MORI, K., HASHIGUCHI, K. Terramechanics. |
| 26. | HIRAI,Y., INOUE, E., MORI, K.,Application of a Quasi-satatic Stalk Bending Analysis to the Dynamic Response of Rice and Wheat Stalks Gathering by a Combine Harvester Reel.,Biosystems Engineering,Vol.88,No.3,Vol.88,No.3,281-294,2004.04. |
| 27. | Mechanical Model on the Driving Mechanism of Combine's Cutting Section and Verification INOUE, E., MARUTANI, I., MITSUOKA, M., HIRAI, Y., MATSUI, M., MORI, K., TAKASE, A. Journal of the Japanese Society of Agricultural Machinery. |
| 28. | MATSUI, M., INOUE, E., KUWANO, T., MORI, K.,Study on the Flying Paddy Acting on the Cleaning Wind(Part 2),Journal of the Japanese Society of Agricultural Machinery,Vol.66, No.1, 49-54,2004.01. |
| 29. | MATSUI, M., INOUE, E., KUWANO, T., MORI, K.,Study on the Flying Paddy Acting on the Cleaning Wind(Part 1),Journal of the Japanese Society of Agricultural Machinery,Vol.66, No.1, 43-48,2004.01. |
| 30. | Effects of the Arrangement of Track Rollers and the Center of Gravity on Vibration Characteristics of the Agricultural Rubber Crawler Vehicle MITSUKA, M., INOUE, E., INABA, S., HARA, S., FUKUSHIMA, T., MARUTANI, I., HIRAI, Y., MORI, K. Science Bulletin of the Faculty of Agriculture Kyushu University. |
| 31. | Evaluation of Strength Distribution on Detachment Force of Paddy Grain INOUE, E., UEKA, I., HIRAI, Y., MATSUI, M., FUKUSHIMA, T., MORI, K. Science Bulletin of the Faculty of Agriculture Kyushu University. |
| 32. | HIRAI, Y., INOUE, E., MORI, K.,Numerical Analysis of the Reaction Force of a Single Rice Stalk Undergoing Forced Displacement,Biosystems Engineering,Vol.86, No.2, 179-189. |
| 33. | MATSUI, M., INOUE, E., KUWANO, T., MORI, K.,Regulating the Winnowing Fan to Accomodate Changes in the Grain Feed Rate,Journal of the Japanese Society of Agricultural Machinery,Vl.65, No.4, 77-81,2003.07. |
| 34. | HIRAI, Y., INOUE, E., MATSUI, M., MORI, K., HASHIGUCHI, K.,Reaction Force and Posture of a Bunch of Wheat Stalks Undergoing Forced Displacement,Journal of the Japanese Society of Agricultural Machinery,Vol.65, No.2, 56-63,2003.03. |
| 35. | HIRAI, Y., INOUE, E., MATSUI, M., MORI, K., HASHIGUCHI, K.,Reaction Force of a Wheat Stalk Undergoing Forced Displacement,Journal of the Japanese Society of Agricultural Machinery,Vol.65, No.2, 47-55,2003.03. |
| 36. | Wavelet Analysis of the Vibration Acceleration for Field Machines INOUE, E., FUKUSHIMA, T., HIRAI, Y., MITSUOKA, M., MARUTANI, I., MORI, K., JINYAMA, H. Science Bulletin of the Faculty of Agriculture Kyushu University. |
| 37. | Travel Resistance of the Agricultural Rubber Crawler(Part 3) INABA, S., INOUE, E., MITSUOKA, M., HASHIGUCHI, K., MATSUO, T. Journal of the Japanese Society of Agricultural Machinery. |
| 38. | HIRAI, Y., INOUE, E., MORI, K., HASHIGUCHI, K.,Investigation of Mechanical Interaction between a Combine Harvester Reel and Crop Stalks,CIGR Electronic Journal,Vol.Ⅳ,2002.11. |
| 39. | MATSUI, M., INOUE, E., KUWANO, T., HASHIGUCHI, K., MORI, K.,Study on the Counting Sensor for Threshing Control,Journal of the Japanese Society of Agricultural Machinery,Vol.64, No.5, 95-100,2002.09. |
| 40. | HIRAI, Y., INOUE, E., MORI, K., HASHIGUCHI, K.,Investigation of Mechanical Interaction between a Combine Reel and Crop Stalks,Biosystems Engineering,Vol.83,No.3,Vol.83, No.3, 307-317,2002.04. |
| 41. | Vibration Characteristics and Identification of Dynamic Parameters of the Rubber Crawler System for Farm Machinery INOUEE, E., MITSUOKA, M., KONYA, H. Journal of the Japanese Society of Agricultural Machinery. |
| 42. | OZAKI, A., MURAMATSU, R.., MORI, K., INOUE, E., HARAGUCHI, T.,Effect of Wind Induced Flow in a Closed Density Stratified Water Area Partially Covered with Floating Water Plants,J.Fac.Agr.,Kyushu Univ.,Vol.47,No.1,Vol.47, No.1, 139-147,2002.02. |
| 43. | Reaeration Model by Falling Water Overcrossing Weir SUMIMOTO, S., MORI, K., INOUE, E., HARAGUCHI, T. Science Bulletin of the Faculty of Agriculture Kyushu University. |
| 44. | Hydraulic Characteristics of Turbulent Shearing Layer at Pass-through of Artificial Block for Fish Nest NAKASHIMA, H., MORI, K., INOUE, E., HARAGUCHI, T. Science Bulletin of the Faculty of Agriculture Kyushu University. |
| 45. | Turbulent Stractures of Wind Induced Flow in a Closed Density Stratified Water Area Partially Covered with the Floating Water Plants MURAMATSU, R., OZAKI, A., MORI, K., INOUE, E., HARAGUCHI, T. Science Bulletin of the Faculty of Agriculture Kyushu University. |
| 46. | Study on the Autonomous Vehicle for Paddy Management Vehicle INOUE, E., TAKASE, A., YADA, K., HASHIGUCHI, K., HIRAI, Y., KONYA, H. Science Bulletin of the Faculty of Agriculture Kyushu University. |
| 47. | Studies on Vibration Characteristics of Rubber Crawler System Equipped with Movable Track Rollers(Part 1) INOUE, E., KASHIMA, J., HIRAI, Y., HASHIGUCHI, K. Journal of the Japanese Society of Agricultural Machinery. |
Presentations
| 1. | Vibration Model of the Half-Tracked Tractor in Consideration of Rolling Resistance. |
| 2. | Non-linear Mechanical Characteristics between Track-roller and Rubber Crawler. |
| 3. | Investigation of Vibration Characteristics of Agricultural Rubber Crawler Vehicle with the Non-Core Bar Type MITSUOKA, M., INOUE, E., HARA, S., MORI, K Japanese Society of Agricultural Machinery. |
| 4. | Wind Velocity for Arbitrary Trajectory of Flying Paddy MATSUI, M., INOUE, E., IMAMURA, E., FURUNO, Y., MORI. K. Japanese Society of Agricultural Machinery. |
| 5. | Dynamic Two-Dimensional Model of the Driving Section of the Half Tracked Tractor FUKUSHIMA, T., INOUE, E. MITSUOKA, M. MORI, K. Japanese Society of Agricultural Machinery. |
| 6. | Study on Impact threshing of Paddy INOUE, E., UEKA, I., HIRAI, Y., MORI. K., IMAMURA, E., MATSUI, M., MIZUSHIMA, J. Japanese Society of Agricultural Machinery. |
| 7. | Vibration Characteristics and Identification of Dynamic Parameters of the Agricultural Rubber Crawler Vehicle MITSUOKA, M. INOUE, E., HARA, S., MORI, K. Terramechanics. |
| 8. | Vibration Characteristics of the Half Tracked Tractor INOUE, E., HUKUSHIMA, T., MITSUOKA, M., HIRAI, Y., MORI, K., HASHIGUCHI, K. Japanese Society of Agricultural Machinery. |
| 9. | Influence of Initial Crawler Tension on Vibration Characteristics of Driving Section of the Agricultural Rubber Crawler Vehicle MITSUOKA, M., INOUE, E., MARUTANI, I., MORI, K., HASHIGUCHI, K., INABA, S. Japanese Society of Agricultural Machinery. |
| 10. | Deflection Posture and Reaction Force of a Rice Stalk Undergoing Forced Displacement HIRAI, Y., INOUE, E., MORI, K., HASIGUCHI, K., TASHIRO, K. Japanese Society of Agricultural Machinery. |
| 11. | Consideration of Mechanics for the Initial Posture of a Rice Stalk in Harvesting Operation HIRAI, Y., INOUE, E., MORI, K., HASHIGUCHI, K., TASHIRO, K. Japanese Society of Agricultural Machinery. |
| 12. | Optimum Equivalent Mass and Time Series Analysis of Unbalance Force For Cutting Section of Combine Harvester INOUE, E., MARUTANI, I., MITSUOKA,M., MATSUI, M., HIRAI, Y., MORI, K., HASHIGUCHI, K., TASHIRO, K., TAKASE, A. Japanese Society of Agricultural Machinery. |
| 13. | Flying Characteristics of Flowing Grain Layer MATSUI,M., INOUE, E., KUWANO, T., MORI, K. Japanese Society of Agricultural Machinery. |
| 14. | Rachis-branch Force and Physical Property of Paddy in Harvesting Season INOUE, E., UEKA, I., HIRAI, Y., MATSUI, M., MORI, K., TASHIRO, K. Japanese Society of Agricultural Machinery. |
| 15. | Analysis of Reaction Forces of a Single Rice Stalk during Gathering Operations HIRAI, Y., INOUE, E., MORI, K., HASHIGUCHI, K. CIGR. |
| 16. | Mechanical Properties of a Wheat Stalk in Reel Operation of Multipurpose Combine HIRAI, Y., INOUE, E., FUKUSHIMA,T., MORI, K., HASHIGUCHI,K. Japanese Society of Agricultural Machinery. |
| 17. | Drag and Lift Coefficient for a Grain of Paddy Acting the Cleaning Wind MATSUI, M., INOUE, E., KUWANO, T., MORI, K. Japanese Society of Agricultural Machinery. |
| 18. | Optimum Equivalent Mass and Time Series Analysis of Unbalance Force For Cutting Section of Combine Harvester INOUE, E., MARUTANI, I., MITSUOKA, M., HIRAI, Y., MATSUI, M., MORI, K., HASHIGUCHI, K., TAKASE, A. Japanese Society of Agricultural Machinery. |
| 19. | Examination of Mechanical Properties of Crop Stalks in Reel Operation HIRAI, Y., INOUE, E., MORI., K., HASHIGUCHI, K. CIGR. |
| 20. | Threshing Control with the Counting Sensor MATSUI, M., INOUE, E., KUWANO, T., TASHIRO, K. Japanese Society of Agricultural Machinery. |
| 21. | Study on the Reduction of Vibration for Cutting Section of Head Feeding Combine INOUE, E., TAKASE, A., HIRAI, Y., HASHIGUCHI, K., TASHIRO, K., MATSUI, M. Japanese Society of Agricultural Machinery. |
| 22. | Identification of Dynamic Parameters of the Rubber Craler System for Farm Machinery INOUE, E., KONYA, H., HIRAI, Y., HASHIGUCHI, K., NOGUCHI, R., INABA, S. Japanese Society of Agricultural Machinery. |
| 23. | Study on Application of Neuro-Computer to Nonlinear Factors for Travel of Agricultural Crawler Vehicles INABA, S., TAKASE., A., INOUE, E., YADA, K., HASHIGUCHI, K. Korean Society for Agricultural Machinery. |
| 24. | Analytical Simulation of Travel Resistance of the Rubber Crawler System for Farm Machinery INABA, S., INOUE, E., HASHIGUCHI, K., MATSUO, T Korean Society for Agricultural Machinery. |
| 25. | Examination of Calculation Method for the Flexual Rigidity of Crop Stalks HIRAI, Y., INOUE, E., HASHIGUCHI, K., KIM, Y.K., INABA, S., TASHIRO, K. Korean Society for Agricultural Machinery. |
| 26. | Identification of Dynamic Parameters of the Rubber Crawler System for Farm Machinery INOUE, E., KONYA, H., HIRAI, Y., NOGUCHI, R., HASHIGUCHI, K., SEOB, C.J. Korean Society for Agricultural Machinery. |
| 27. | Study on the Autonomous Vehicle for Paddy Management Vehicle YADA, K., INOUE, E., HASHIGUCHI, K., SEKI, M., NISHIDA, H., TAKAHASHI, K. Japanese Society of Agricultural Machinery. |
| 28. | Mechanical Interaction in Reel Operation of Multipurpose Combine HIRAI, Y., INOUE, E., HASHIGUCHI, K., OKAYASU, T. Japanese Society of Agricultural Machinery. |
| 29. | Study on Grain Feed Rate Sensor for Threshing Control MATSUI, M., INOUE, E., HIRAI, Y., TASHIRO, K. Japanese Society of Agricultural Machinery. |
- American Society of Agricultural Engineers
- Japanese Society of Agricultural Machinery
- Japanese Society Farm Work Research
- Teraamechanics
- Study on reduction of head loss at the soy bean harvesting operation of combine harvester.
Educational
Educational Activities
Under Graduate Education/
Agricultural Machineries, Machinery Design ,Science EnglishⅡ
Graduate Education/
Advanced Topics in Bioproduction System Design Engineering
Advanced Topics in Bioproduction Environmental Sciences Part1
Advanced Practice in Bioproduction Environmental Sciences Project
Sciences in Bioproduction Environment
Data Analysis of Bioproduction Environmentl
Agricultural Machineries, Machinery Design ,Science EnglishⅡ
Graduate Education/
Advanced Topics in Bioproduction System Design Engineering
Advanced Topics in Bioproduction Environmental Sciences Part1
Advanced Practice in Bioproduction Environmental Sciences Project
Sciences in Bioproduction Environment
Data Analysis of Bioproduction Environmentl
Social
The fact that no permission it reprints contents of this data base is prohibitted.