九州大学 研究者情報
発表一覧
山口 悟(やまぐち さとる) データ更新日:2023.11.22

准教授 /  工学研究院 海洋システム工学部門 海洋システム設計学講座


学会発表等
1. 進藤 祐太, 山口 悟, 福田 雄, モデル予測制御による水中曳航体の運動制御, 日本船舶海洋工学会春季講演会, 2023.06, 水面下の遺跡や沈没船を発掘,保存,調査する水中考古学分野では,全世界の海域で宮殿や沈没船の発掘が行 われている.一方で,その歴史は比較的浅く海底には歴 史的,学術・技術的に価値を有する船舟類に関する遺跡 が数多く未調査のまま残されている.
海底の状態を詳細に観察しようとするとき,水中ビークルに搭載した光学カメラを用いて静止画や動画を撮影 することが有用である.海中では光の減衰や散乱の影響 によって可視距離が数メートル程度に限定される場合が 多く,太陽光が届かない水深においては照明を使用して 撮影するため,特にマリンスノーによる後方散乱による 影響が強く,可視距離が短くなる.したがって,海底を 広範囲に撮影するためには,海底の起伏や勾配に追従し, 障害物を回避しながら海底との距離を近く保ったまま水 中ビークルを高速で移動させることができる高い運動性 能が求められる.
本報告では,光学カメラによって海底を撮影する水中 曳航体の運動制御について調査し,その課題を検討する..
2. 山口 悟, 澤田 恵理子, 海底遺跡調査における海中ロボットの利用
, 日本船舶海洋工学会春季講演会, 2023.06, 水面下の遺跡や沈没船を発掘,保存,調査する水中考古学分野では,全世界の海域で宮殿や沈没船の発掘が行 われている.一方で,その歴史は比較的浅く海底には歴 史的,学術・技術的に価値を有する船舟類に関する遺跡 が数多く未調査のまま残されている.
前報では長崎県松浦市の鷹島神崎遺跡を対象として, 比較的浅い海域の海底遺跡探査を対象とした小型曳航体 を計画し,その運動制御性能を調査した.沈没船の調査 において遺物の位置が特定された後,多数の画像データ に基づくフォトグラメトリ等の方法により遺物の相対位 置等が詳細に記録される.本報告では発見された遺物の 記録に有索式 AUV を利用する手法について調査する.すなわち,海底の沈没船の記録調査を想定した有索式 AUV を計画し,その運動モデルを構築する.また,得られた 運動モデルに基づく運動制御系の設計と海底遺物の記録 作業のシミュレーションをもとに,有索式 AUV による記 録作業の効率について検討する..
3. 山口 悟, 福田 雄, 浅海域を対象とした海底遺跡探査手法の検討, 日本船舶海洋工学会春季講演会, 2022.05, 水中考古学は水面下の遺跡や沈没船を発掘,保存,調査する研究分野であり,全世界の海域で宮殿や沈没船の発掘が行われているが,その歴史は比較的浅く,海底には歴史的,学術・技術的に価値を有する船舟類に関する 遺跡が数多く未調査のまま残されていると考えられる。
本報告では,水中考古学における従来の探査手法について調査し,その課題を検討する。また,鷹島神崎遺跡 の元寇沈船探査のため,浅海域を対象とする音波探査と曳航体を組み合わせた探査システムを計画し,試作機の流体力学的特性,運動制御性能について検討する。.
4. Satoru Yamaguchi, Yu Fukuda, Yuta Shindo, Development of an Underwater Towed Exploration System for Archaeological Relics, TheThirty-second (2022) International Offshore and Polar Engineering Conference, 2022.06, Many archaeological relics such as a wreck of an ancient ship are remains under the sea bottom and most of them are untouched because of difficulties of underwater exploration. Usual sub-bottom explorations for offshore resources such as oil and gas are carried out using seismic and sonic prospecting instruments and it is high cost and time consuming. On the other hand, archaeological relics in the relatively shallow water are explored by a sub-bottom profiler and by divers so the area which can be investigated is very limited.
The authors have been developing underwater towed vehicles and autonomous underwater gliders in the previous studies. These vehicles equip various types of instruments including an OBEM (Ocean Bottom Electro-Magnetometer). They are promising instruments for marine environment survey and ocean floor resources exploration.
In this report, a towed exploration system for archaeological relics exploration is proposed and the development of the vehicle including a motion controller is discussed. The vehicle is towed near the sea bottom to improve the accuracy of the measurement using a sonic prospector. The performance of the towed system and its motion control system are assessed by tank experiments and numerical simulations.
.
5. Satoru Yamaguchi, Yutaro Miyai, Transient Motion Control of an Underwater Glider Based on Numerical Analysis, TheThirty-first (2021) International Offshore and Polar Engineering Conference, 2021.06, The authors have been developing an autonomous underwater glider which equips an OBEM (Ocean Bottom Electro-Magnetometer). That is a hopeful instrument for the ocean floor resources explorations. The autonomous vehicle has an ability to achieve a continuous resource exploration autonomously for a long term. The motion control system for landing of the vehicle was investigated in the previous studies. In these reports, hydrodynamic performance of the vehicle in landing is examined by CFD calculations. The bottom effect which affects the lift and drag of the wings of the glider is studied and the characteristics of the blended wing body near a sea bottom is discussed.
On the other hand, the transient motions of the vehicle such as a deployment, the motion when the vehicle changes its buoyancy for cruise are also important problems for the motion control of the vehicle. The control system might be affected by the unpredicted change of the hydrodynamic forces acting on the body and the wing in the transient conditions. Consequently, it may cause deterioration of the performance of the control system.
In this report, these transient motions are investigated based on CFD analysis. The overset mesh approach is used to simulated the sequential maneuvers in the cruising of the underwater vehicle..
6. Satoru Yamaguchi, Yutaro Miyai, Study on Hydrodynamic Performance of a Blended Wing Body for an Underwater Glider based on Numerical Analysis, TheThirtieth (2020) International Offshore and Polar Engineering Conference, 2020.10, The authors have been developing an autonomous underwater glider which equips an OBEM (Ocean Bottom Electromagnetometer). That is a hopeful instrument for the ocean floor resources explorations. The autonomous vehicle has an ability to achieve a continuous resource exploration autonomously for a long term. The buoyancy and attitude control mechanism of the vehicle enable to move to the next measurement point by gliding.
The vehicle which has a blended wing body measures the slight variation of electromagnet wave on the sea bottom and the landing point for the measurement must be precisely controlled by the motion control system. In the landing stage, it is predicted that surface effect of the sea bottom affects the hydrodynamic characteristics of the vehicle, and it might cause some problems on the motion control system of the vehicle.
The authors attempt to make clear the characteristics of the flow field around the vehicle in the vicinity of a sea bottom. The motion control system for landing of the vehicle was investigated in the previous study (Yamaguchi and Sumoto, 2019). In this report, hydrodynamic performance of the vehicle in landing is examined by CFD calculations. The surface effect by a sea bottom which affects the lift and drag of the wings of the glider is studied and the characteristics of the blended wing body near a sea bottom is discussed..
7. Nitin D Thulkar, Satoru Yamaguchi, Koki Ebihara, Study of Drag Force Acting on Various Types of DP Jack-up Vessel Legs, TheTwenty-ninth (2019) International Offshore and Polar Engineering Conference, 2019.06, The Dynamic Positioned (DP) Jack-up vessels currently use two popular designs of legs, (i.e. rack & chord lattices and cylindrical leg type). These two leg designs are popular and various experiment conducted in the past to evaluate the drag coefficient and drag force of these legs, but they are only available in a steady state condition. The intention of our experiment is to measure drag force and compare with CFD results. In DP vessels, mathematical model of the vessel first estimates the environmental force acting on the vessel, by using real time sensor data and then generate the counter balance thrust. The output command of force and angle is then sent to the available thrusters. However, usually, DP Jack-up vessels do not have sensor to measure the hydrodynamic force of leg &spudcan. Presently, each DP control system manufacturer for Jack-up vessels uses its own mathematical technique to achieve stability of station keeping during simultaneous operation of dynamic positioning and Jacking operation (SIMOPS). Moreover, this sensor less DP system tuning is unknown to the industries. Our intention of these experiments is to measure the hydrodynamic forces, in order to understand how the evaluated forces is altered under different environmental and operational conditions in SIMOPS operation. To start with, we first decided to measure drag forces when leg & spudcan moves in UP/DN direction under variable environment current. Both CFD and tank experiment is done using 3D prototype scale model of a cylindrical leg. The experimental limitation is also defined based on the tank facilities. The data is recorded during lowering and raising of the leg to see the effect on the drag force of leg- spudcan. The experimental data are recorded for current, leg speed; drag forces etc. with respect to time and average value considered for a steady state experimental case period. The evaluated results are compared with CFD results and show similar trends with acceptable error. The CFD analysis also carried out on a full-scale leg diameter to see the drag force trends. In order to understand the effect of seabed on the overall hydrodynamic force, cases were studied in which the leg was kept just a 0.1 m above seabed..
8. Satoru Yamaguchi, Hirofumi Sumoto, Landing Motion Control of an Underwater Glider for Ocean Floor Resources Exploration, TheTwenty-ninth (2019) International Offshore and Polar Engineering Conference, 2019.06, Ocean floor resources such as sea-floor hydrothermal deposit, methane hydrate and manganese nodule are promising resources for future ocean development. It is becoming apparent by recent research that certain amount of these resources deposit also near Japan. Though several kinds of exploration methods such as seismic exploration, a multi-beam echo sounder and a sub-bottom profiler which are equipped with a survey ship are used for the resource explorations in general, these exploration methods need a large amount of cost and efforts.
On the other hand, an autonomous underwater glider which equips an OBEM (Ocean Bottom Electromagnetometer) which has been developed in the author’s laboratory is a hopeful instrument for the ocean floor resources explorations. The autonomous vehicle has an ability to achieve a continuous resource exploration autonomously for a long term. The buoyancy and attitude control mechanism enable the vehicle to move to the next measurement point by gliding.
The landing point for the measurement must be precisely controlled by the motion control system because the vehicle measures the slight variation of electromagnet wave on the sea bottom. The performance in a landing stage is essential for the motion control of the vehicle. Here, the motion control system of a weight shift device in the vehicle’s pressure container is developed for a landing stage. The authors attempt to make clear the performance of the controller in this report. Moreover, the characteristics of a buoyancy control device is examined by tank experiments. This unit is used to raise the vehicle to an appropriate height for the next gliding..
9. Nitin Thulkar, Satoru Yamaguchi, Koki Ebihara, Analysis of Viscous Drag Forces on Jack Up Service Vessels during Simultaneous Operation, 日本船舶海洋工学会秋季講演会, 2018.11, The deepwater energy market in oil and gas has hampered, however the shallow water market continues to grow. Although the renewable energy impacting the energy market but it is mainly affecting coal based thermal power plants, while oil & gas energy market continue to grow.
The purpose of this manuscript is to find the viscous drag force on DP Jackup vessel during SIMOPS operation. The DP system calculates leg interaction forces using fixed Cd Value and fed to DP system for thrust calculation during this SIMOPS (i.e. Jacking operation+ DP station keeping).
However, during the CFD analysis, it was concluded that Cd values varies during leg transient from higher Cd value to steady state..
10. Satoru Yamaguchi, Landing Point Control of an Underwater Gliding Vehicle for Ocean Floor Resources Exploration, The 16th IAIN World Congress 2018, 2018.11.
11. Nitin D Thulkar, Satoru Yamaguchi, Evaluation of Drag Coefficient Variation in Transit Mode on Leg & Spud can of DP Jackups Vessel, TheTwenty-eighth (2018) International Offshore and Polar Engineering Conference, 2018.06.
12. Satoru Yamaguchi, Hirofumi Sumoto, Ryota Sakamoto, Ryo Nogami, Gliding Performance of an Underwater Glider for Ocean Floor Resources Exploration, TheTwenty-eighth (2018) International Offshore and Polar Engineering Conference, 2018.06.
13. Satoru Yamaguchi, Hirofumi Sumoto, Taishiro Katsu, Yasuki Kono, Development of an Autonomous OBEM Measurement Vehicle for Offshore Resources Exploration, TheTwenty-seventh (2017) International Offshore and Polar Engineering Conference, 2017.06.
14. Satoru Yamaguchi, Hideki Mizunaga, Taishiro Katsu, Satoshi Nakamuta, Yasuki Kono, Preliminary Design of an Underwater Glider for Ocean Floor Resources Exploration, TheTwenty-sixth (2016) International Offshore and Polar Engineering Conference, 2016.06.
15. 山口 悟, 中牟田 賢, 勝 泰史朗, 数値計算に基づくオフショア支援船の甲板冠水に関する研究, 日本船舶海洋工学会, 2016.05.
16. 藤原 慎平, 山口 悟, 複数の人工筋肉とサーボモータを併用した魚類型ロボットを用いた水生生物の観測, エアロアクアバイオメカニズム学会講演会, 2016.03.
17. 藤原 慎平, 山口 悟, 実海域を想定した魚類型ロボットの運動機構の提案, 日本船舶海洋工学会, 2015.11.
18. 山口悟、山本鷹、中牟田賢、勝泰史朗, 海底資源探査用グライダー型海中ビークルの機体計画, 日本船舶海洋工学会, 2015.11.
19. 藤原 慎平, 山口 悟, 複数の人工筋肉とサーボモータを併用した魚類型ロボットの泳動性能の向上について, エアロアクアバイオメカニズム学会講演会, 2015.09.
20. 新開 明二, 山口 悟, 石黒 仁規, 冨田 英輔, 海洋において船舶が遭遇するフリーク波を最大船体応答の設計波と見なすための方案, 日本船舶海洋工学会, 2014.11.
21. 新開 明二, 山口 悟, 勘米良 悠貴, 口木 祐介, 中牟田 賢, 船影画像処理に基づく船種判別ツールに関する一考察, 日本船舶海洋工学会, 2014.11.
22. 藤原 慎平, 山口 悟, 人工筋肉とサーボモータを併用した魚類型ロボットの泳動性能について, 日本船舶海洋工学会, 2014.11.
23. 新開 明二, 山口 悟, 児島 祐子, 中牟田 賢, 長期船体応答の初期通過確率モデルに関する考察(第3報), 日本船舶海洋工学会, 2014.05.
24. 新開 明二, 山口 悟, 石黒 仁規, 冨田 英輔, 海洋において船舶が遭遇するフリーク波の数理統計の特性について, 日本船舶海洋工学会, 2014.05.
25. 新開 明二, 山口 悟, 児島祐子, 中牟田賢, 長期船体応答の初期通過確率モデルに関する考察(続), 日本船舶海洋工学会, 2013.11.
26. 山口 悟, 藤原慎平, 木村亮太, 人工筋肉を用いた魚類型ロボットの群制御システムの開発, 日本船舶海洋工学会, 2013.11.
27. 石黒仁規, 山口 悟, 新開 明二, 海洋におけるフリーク波の統計的予測と船体応答の長期予測, 日本船舶海洋工学会, 2013.11.
28. 山口 悟, 冨田英輔, 山田真滋, 新開 明二, 海上輸送ネットワークシステムの分析からの一考察(続), 日本船舶海洋工学会, 2013.11.
29. Masaki Ishiguro, Akiji Shinkai, Satoru Yamaguchi, A Study on the Statistical Prediction of the Freak Wave Generation in the Ocean, TheTwenty-third (2013) International Offshore and Polar Engineering Conference, 2013.07.
30. 新開 明二, 山口 悟, 山田真滋, 冨田英輔, 海上輸送ネットワークシステムの分析からの一考察, 日本船舶海洋工学会, 2013.05.
31. 三井哲夫, 山口 悟, 新開 明二, 航洋船舶の海上風環境評価システムについて(続), 日本船舶海洋工学会, 2013.05.
32. 山口 悟, 新開 明二, スシャント ゴドガテ, 海老原悠, 児島祐子, 図の体系理論に基づく造船設計図形情報処理についての一考察, 日本船舶海洋工学会, 2013.05.
33. 石黒仁規, 新開 明二, 山口 悟, 海洋において船舶が遭遇するフリーク波の統計的予測, 日本船舶海洋工学会, 2013.05.
34. 山口 悟, 新開 明二, 和泉貴之, 窪田 哲也, 大洋を航行する船舶の凌波性能と海洋波の予測, 日本船舶海洋工学会, 2013.05.
35. 山口 悟, 黒岩幸太郎, グライダー型水中ビークルの初期滑空状態に関する研究, 日本船舶海洋工学会, 2013.05.
36. Akiji Shinkai, Satoru Yamaguchi, Masaki Ishiguro, Shinji Yamada, A Study from a View Point of the Theory of Error about the Evaluation of Ship Design, 5th PAAMES and AMEC 2012, 2012.12.
37. 石黒仁規、新開明二、山口悟, 海洋において船舶が遭遇するフリーク波の数値シミュレーションについて(続), 日本船舶海洋工学会, 2012.11.
38. 窪田徹也、山口悟、石黒仁規、海老原悠、新開明二, 船舶設計におけるモンテカルロ数値実験法の活用, 日本船舶海洋工学会, 2012.11.
39. 新開明二、山口悟、スシャント ゴドガテ、海老原悠、児島祐子, 図の体系からみた造船設計図形情報処理の一解釈, 日本船舶海洋工学会, 2012.11.
40. 三井哲夫、山口悟、新開明二, 航洋船舶の海上風環境評価システムについて, 日本船舶海洋工学会, 2012.11.
41. 山口 悟, 大洋を航行する船舶の凌波性能の推定について(続), 日本船舶海洋工学会, 2012.11.
42. SATORU YAMAGUCHI, A Study on IT Solution for Ship Design Based on Virtual Ship Concept, TheTwenty-second(2012) International Offshore and Polar Engineering Conference, 2012.06.
43. 須本祐史、重廣律男、鶴田真一郎、山口悟, 形状記憶合金型人工筋肉を使用した魚型ロボットの開発, 日本水産工学会, 2012.05.
44. Sushant Godghate, Satoru Yamaguchi, A Study on Estimation of Ship Construction Based on Virtual Ship Concept, 日本船舶海洋工学会, 2012.05.
45. 窪田徹也、山口悟、石黒仁規、海老原悠、新開明二, 船舶設計ツールとしてのモンテカルロ法の利用方案(第3報), 日本船舶海洋工学会, 2012.05.
46. 新開明二、山口悟、和泉貴之, 大洋を航行する船舶の凌波性能の推定について, 日本船舶海洋工学会, 2012.05.
47. 石黒仁規、新開明二、山口悟, 海洋において船舶が遭遇するフリーク波の数値シミュレーションについて, 日本船舶海洋工学会, 2012.05.
48. 三井哲夫、山口悟、新開明二, 航洋船舶の性能への海上風影響評価に関する考察(第3報), 日本船舶海洋工学会, 2012.05.
49. 山口悟、窪田徹也、石黒仁規、海老原悠、新開明二, 船舶設計ツールとしてのモンテカルロ法の利用方案(続), 日本船舶海洋工学会, 2011.11.
50. 石黒仁規、新開明二、山口悟, 海洋におけるフリーク波の統計的特性の定式化, 日本船舶海洋工学会, 2011.11.
51. 三井哲夫、山口悟、新開明二, 航洋船舶の性能への海上風影響評価に関する考察(続), 日本船舶海洋工学会, 2011.11.
52. 和泉貴之、山口悟、新開明二, 大洋を航行する船舶の船速低下の予測法, 日本船舶海洋工学会, 2011.11.
53. Hirofumi Sumoto and Satoru Yamaguchi, A Study on a Control Method of Artificial Muscle Using Segmented Binary Control for an Up-scaled Fish Type Robot, The Twenty-first(2011) International Offshore and Polar Engineering Conference, 2011.06.
54. 新開明二、山口悟、窪田徹也、石黒仁規, 船舶設計ツールとしてのモンテカルロ法の利用方案, 日本船舶海洋工学会, 2011.05.
55. 和泉貴之、山口悟、新開明二, 波浪中船速低下推定の確率・統計的技法の検討(続), 日本船舶海洋工学会, 2011.05.
56. 山口悟、三井哲夫、新開明二, 航洋船舶の性能への海上風影響評価に関する考察, 日本船舶海洋工学会, 2011.05.
57. 石黒仁規、新開明二、山口悟, 海洋におけるフリーク波の特性についての考察, 日本船舶海洋工学会, 2011.05.
58. 川久保健太郎、木村亮太、川添健史、山口悟, 水産資源量調査用グライダー型水中ビークルの滑空特性について, 日本船舶海洋工学会, 2011.05.
59. 新開明二、三井哲夫、山口悟, 大洋の長期波浪発現確率における順序統計結合分布の船舶設計への利用について, 日本船舶海洋工学会, 2010.11.
60. 和泉貴之、山口悟、新開明二, 波浪中船速低下推定の確率・統計的技法の検討, 日本船舶海洋工学会, 2010.11.
61. 山口悟、窪田徹也、新開明二、熊本直人、石黒仁規, 海洋におけるフリーク波の統計的予測, 日本船舶海洋工学会, 2010.11.
62. 須本祐史、山口悟, 人工筋肉を用いた魚類型ロボットの大型化について, 日本船舶海洋工学会, 2010.11.
63. 新開明二、山口悟、石黒仁規、山田真慈, 船舶の設計評価に関する誤差論からの考察, 日本船舶海洋工学会, 2010.11.
64. Hirofumi Sumoto and Satoru Yamaguchi, Development of a Motion Control System Using Phototaxis for a Fish Type Robot, The Twentieth(2010) International Offshore and Polar Engineering Conference, 2010.06.
65. 須本祐史、山口悟, 魚類型ロボットのためのSegmented Binary Control による人工筋肉の制御に関する研究, 日本船舶海洋工学会, 2010.06.
66. 新開明二、三井哲夫、山口悟, 大洋の長期波浪発現確率における順序統計結合分布の利用について(続), 日本船舶海洋工学会, 2010.06.
67. 新開明二、山口悟、窪田徹也、熊本直人, 海洋におけるフリーク波の発生確率に関する一考察, 日本船舶海洋工学会, 2010.06.
68. 山口悟、和泉貴之、新開明二, 波浪中船速低下推定の統計的手法について, 日本船舶海洋工学会, 2010.06.
69. 新開明二、三井哲夫、山口悟, 大洋の長期波浪発現確率における順序統計結合分布の利用について, 日本船舶海洋工学会, 2009.11.
70. 新開明二、山口悟、熊本直人、川久保健太郎, 長期船体応答の初期通過確率モデルに関する考察, 日本船舶海洋工学会, 2009.11.
71. 須本祐史、山口悟, 人工筋肉を用いた小型魚類型ロボットの自律化について, 日本船舶海洋工学会, 2009.11.
72. 内藤誉、山口悟、須本祐史, 水産資源量調査用グライダー型水中ビークルの機体開発について, 日本船舶海洋工学会, 2009.11.
73. 新開明二、山口悟, 装飾古墳に描かれた舟の図像についての技術史的論考(第3報), 日本船舶海洋工学会, 2009.11.
74. Akiji Shinkai, Satoru Yamaguchi, Yusuke Kuchiki and Naoto Kumamoto, Mathematical Logic for the Ship Design through the Axiomatic Approach, The Nineteenth(2009) International Offshore and Polar Engineering Conference, 2009.06.
75. Masashi Terada, Hirofumi Sumoto and Satoru Yamaguchi, Development of Control System for a Fish Type Robot, The Nineteenth(2009) International Offshore and Polar Engineering Conference, 2009.06.
76. 新開明二、山口悟、川島大輝, 大洋の長期波浪発現確率における波高と波周期の連関の測度に関する考察, 日本船舶海洋工学会, 2009.05.
77. 新開明二、山口悟, 装飾古墳に描かれた舟の図像についての技術史的論考(続), 日本船舶海洋工学会, 2009.05.
78. 新開明二、山口悟、柏慎一郎、川島大輝, 最大船体応答と長期予測に関する一考察, 日本船舶海洋工学会, 2008.11.
79. 山口悟、戸田哲哉、熊本直人、瀧口拓樹、新開明二, 高速艇性能データベースについての一考察, 日本船舶海洋工学会, 2008.11.
80. 山口悟、三角健介、新開明二, 洋上風力発電フリートネットワークシステムについて, 日本船舶海洋工学会, 2008.11.
81. 新開明二、山口悟, 装飾古墳に描かれた舟の図像についての技術史的論考, 日本船舶海洋工学会, 2008.11.
82. 寺田昌史、山口悟, 泳動する魚体まわりの流れに関する研究, 日本船舶海洋工学会, 2008.11.
83. Takashi Naito, Satoru Yamaguchi, Yuki Kawashita and Yoshikazu Fuchigami, Development of an Underwater Gliding Vehicle, The 3rd Pan Asian Association of Maritime Engineering Societies and Advanced Maritime Engineering Conference 2008, 2008.10.
84. Akiji Shinkai, Satoru Yamaguchi, Shinichiro Kashiwa and Daiki Kawashima, The Long-term Wave Statistics Database on the Pacific, Atlantic and Indian Oceans, The 3rd Pan Asian Association of Maritime Engineering Societies and Advanced Maritime Engineering Conference 2008, 2008.10.
85. Satoru Yamaguchi, Tetsuya Toda, Seung-Jin Shin and Akiji Shinkai, On a Hull-Body displaying Method of Small High-Speed Boart in consideration of the Analysis of Spray around Bow, The 3rd Pan Asian Association of Maritime Engineering Societies and Advanced Maritime Engineering Conference 2008, 2008.10.
86. Masashi Terada, Hirofumi Sumoto and Satoru Yamaguchi, A Study on Characteristics of a Flexible Body for a Fish Type Robot, The Eighteenth (2008) International Offshore and Polar Engineering Conference, 2008.07.
87. 山口悟、須本祐史、濱田雄二、本田淳士, 人工筋肉を用いた水中ビークル用運動機構の開発, 日本船舶海洋工学会, 2008.05.
88. 山口 悟, 九州大学における海洋教育への取り組み -「海ののりもの展」の開催について-, 第20回海洋工学シンポジウム, 2008.03.
89. 山口悟、内藤誉 , グライダー型海洋観測ビークルの実海域における運用計画について
, 日本船舶海洋工学会, 2007.11.
90. 戸田哲哉、山口悟、慎勝進、新開明二 , 小型高速艇の船体形状表示と船首部スプレーの解析
, 日本船舶海洋工学会, 2007.11.
91. 新開明二、山口悟、柏慎一郎、戸田哲哉 , 稀な海象の統計学的数値実験に関する考察
, 日本船舶海洋工学会, 2007.11.
92. 新開明二、山口悟、川島大輝、戸田哲哉 , 大洋の長期波浪発現確率の表現法に関する一考察
, 日本船舶海洋工学会, 2007.11.
93. Satoru Yamaguchi, Takashi Naito, Takeshi Kugimiya, Kengo Akahosi and Masataka Fujimoto , Development of a Motion Control System for Underwater Gliding Vehicle
, The Seventeenth(2007) International Offshore and Polar Engineering Conference, 2007.07.
94. 戸田哲哉、山口悟、新開明二、慎勝進 , 3次元CADを用いた小型高速艇の艇体表示に関する研究
, 日本船舶海洋工学会, 2007.05.
95. 寺田昌史、山口悟 , 人工筋肉を利用した魚類型ロボットの運動性能に関する研究
, 日本船舶海洋工学会, 2007.05.
96. 山口悟、内藤誉、釘宮武志、赤星顕悟、藤本尚孝 , グライダー型海洋観測ビークルの運動制御機構の開発に関する研究
, 日本船舶海洋工学会, 2007.05.
97. 柏慎一郎、新開明二、山口悟 , 大洋で船舶が遭遇する異常波浪のシミュレーション推定
, 日本船舶海洋工学会, 2007.05.
98. 山口悟、須本祐史、寺田昌史, 人工筋肉を利用した魚類型ロボットの小型化に関する研究, 日本船舶海洋工学会, 2006.11.
99. 新開明二、山口悟、慎勝進、内藤誉、柏慎一郎, 船舶が遭遇する異常波浪の統計学的裾野分布の推定, 日本船舶海洋工学会, 2006.11.
100. 新開明二、山口悟、柏慎一郎、内藤誉, 衛星情報に基づく全球波浪統計データベースの利用指針, 日本船舶海洋工学会, 2006.11.
101. 慎勝進、山口悟、吉田正人、戸田哲哉、新開明二, 小型高速艇における船首部Sprayの解析, 日本船舶海洋工学会, 2006.11.
102. Seun-Jin SHIN, Satoru YAMAGUCHI and Akiji SHINKAI, An Analysis of Spray for a Small High-Speed Craft by Jet of Water, The International Offshore and Polar Engineering Conference, 2006.06.
103. Satoru YAMAGUCHI and Masashi TERADA, A Study on Control Method for a Fish Type Robot by Artificial Muscle, The International Offshore and Polar Engineering Conference, 2006.06.
104. 慎勝進、山口悟、新開明二, 小型高速艇の船首部波崩壊現象の解析 - 自由境界を有する薄膜流解析による推定 -, 日本船舶海洋工学会, 2006.05.
105. 新開明二、山口悟、口木裕介、慎勝進, 設計公理に基づく船舶設計の数学的論理表現, 日本船舶海洋工学会, 2006.05.
106. 新開明二、山口悟、慎勝進、柏慎一郎、川島大輝, 太平洋、大西洋およびインド洋における長期波浪統計データベースについて, 日本船舶海洋工学会, 2006.05.
107. 山口悟、寺田昌史, 人工筋肉を利用した魚類型ロボットの運動制御方法の開発, 日本船舶海洋工学会, 2006.05.
108. 山口 悟, 魚類型ロボットの運動機構の開発, 西部造船会第110回例会, 2005.05.

九大関連コンテンツ

pure2017年10月2日から、「九州大学研究者情報」を補完するデータベースとして、Elsevier社の「Pure」による研究業績の公開を開始しました。