| 1. |
Katsuya TAKASAKI, Takayoshi KIMURA, Ayaka TSUTSUMIUCHI, Keiji SONODA, and Kazuki TAKENOUCHI, Development of a Closed-Type Plant Factory for Root Vegetables and Its Trial Cultivation, 13th International Symposium on Environmentally Conscious Design and Inverse Manufacturing - EcoDesign with Art, Science and Technology -, 2023.11. |
| 2. |
Murota, K., Kang, Y., Hyodo, S., Yoo, S. J., Takenouchi, K., Tanabe, S. I. & Ito, K., Hygro-thermo-chemical transfer analysis of clothing microclimate using three-dimensional digital clothing model and computer-simulated person, Indoor and Built Environment, 10.1177/1420326X211059449, 2022.01. |
| 3. |
Kang, Y., Murota, K., Kuga, K., Yoo, S. J., Takenouchi, K., Tanabe, S. I. & Ito, K., Three dimensional clothing model integrated with computer-simulated person for computational fluid dynamics simulation, 16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020., 2020.11. |
| 4. |
Yugo MIYACHI, Genjiro ABE, Keiji SONODA, Hiroshi OKAWA and Kazuki TAKENOUCHI, Design and Manufacture of CNC Plasma Cutting Machine, The 4th International Congress on Design Engineering and Science, 2020.11, An eccentric planetary gear drive with hydraulic motor was developed, specifications of which were determined based on its service conditions as required for a relatively small-sized crawler-type conveyer for agriculture-use. The gear train was originally designed by arranging gears, including an eccentric planetary gear, and manufactured. Measured efficiency of power transmission of the gear drive by use of the torque balance method under quasi-steady state was approx. 0.90, 0.91 at the highest, lubricated with hypoid gear oil, promising availability in practical use. Also shown in operating test was a relatively high efficiency of 0.87 in speed increasing conditions.. |
| 5. |
福田幸一，大月彩香，竹之内和樹, Monge「図法幾何学」出版より前に印刷本などで表現されていた複面投影図, 図学研究, 54, 2, 25-32, 2020.09. |
| 6. |
Murota, Kang, Y., K., Kuga, K., Yoo, S. J., Takenouchi, K., Tanabe, S. I. & Ito, K., Flow and hygrothermal transfer analysis in three dimensional clothing model integrated with computer simulate person, 16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020., 2020.11. |
| 7. |
Yujin Kang, Sung-Jun Yoo; Kazuki Takenouchi; Hitomi Yoshida; Shin-ichi Tanabe; Kazuhide Ito, Distribution of Transient Formaldehyde Concentration in Confined Small Glass Desiccators and Its Impact on Emission Rate Measurement, Atmospheric Environment, 218 (2019) 116979, 2019.1, 2019.11. |
| 8. |
竹之内和樹, 福田幸一, Mongeの図法幾何学における3次元問題と平面幾何定理に関する考察, 図学研究, 52, 4, 27-33, 2018.12. |
| 9. |
姜 裕珍, 久間 裕太郎, 劉 城準, 竹之内 和樹, 吉田 仁美, 田辺 新一, 伊藤 一秀, ホルムアルデヒド放散試験に適用可能性のある各種デシケータ幾何形状を対象とした等価拡散距離評価, 日本建築学会環境系論文集, 10.3130/aije.83.883, 83, 753, 883-889, 2018.11. |
| 10. |
河田 尚子, 竹之内 和樹, 戸水 晴夫, 頭蓋骨ハンズオンモデルスタンドのデザイン, 日本設計工学会「設計工学」, 52, 8, 498-502, 2017.08. |
| 11. |
TAKENOUCHI, Kazuki, Computational Mechanics for Design Course Students, Proceedings of the 2nd International Conference on Design Engineering and Science, 2010.10. |
| 12. |
能野謙介, 竹之内和樹, 石村眞一, 木製チキリを用いた木材集成補強［1］, 芸術工学研究, Vol.10 pp.47-56, 2009.03. |
| 13. |
Toshio Sakata, Kazuki Takenouchi, Kensuke Nouno, Kazumitsu Maehara and Takahiko Horiuchi, A Treatise on Mathematical Color Inpainting of Japanese Old Statues, Proceedings of International MultiConference of Engineering and Computer, 2008.03. |
| 14. |
Kimitoshi Fukudome, Kazuki Takenouchi, Masato Kashida, Toshiaki Samejima and Naoki Ono, A Fast Measurement System for the Listener's Own Head-Related Impulse Responses, 19th International Congress on Acoustics - ICA2007 Madrid, 2007.09. |
| 15. |
Kazuki TAKENOUCHI, Kusuo OKUMA, Akinori FURUKAWA and Toshiaki SETOGUCHI, On Applicability of Reciprocating Flow Turbines Developed for Wave Power to Tidal Power, Renewable Energy, No.31, pp.209-223., 2006.01. |
| 16. |
Kazuki TAKENOUCHI, Tomoaki FUJI and Hidechito HAYASHI, A Trial of Exercise of Computational Mechanics by Using Spreadsheet Software, Proceedings of the 1st International Conference on Design Engineering and Science - New Progress in Design Engineering and Science -, pp.249-252, 2005.10. |
| 17. |
Kazuki TAKENOUCHI, Kusuo OKUMA and Akinori FURUKAWA, Extra-Low Head Hydro Power Utilization by Darrieus Turbine, International Symposium on EcoTopia Science 2005, pp.495-498, 2005.08. |
| 18. |
Akinori FURUKAWA, Kazuki TAKENOUCHI, Kusuo OKUMA and Satoshi WATANABE, Utilization of Two-Dimensional Ducted Darrieus Turbine for Extra-Low Head Hydropower, EXPO WCWRF 2005 - papers - Integrated Renewable Energies for the Future, paper No.4010, 2005.09. |
| 19. |
Kazuki TAKENOUCHI, Akinori FURUKAWA, Kusuo OKUMA and Satoshi WATANABE, Self-Starting Characteristics of Ducted Darrieus Turbine for Extra-Low Head Hydropower, EXPO WCWRF 2005 - papers - Integrated Renewable Energies for the Future, paper No.4013, 2005.09. |
| 20. |
大熊九州男, 竹之内和樹, 古川明徳, 瀬戸口俊明, 波力発電用に開発されたタービンの潮汐発電への応用, ターボ機械, 第33巻第6号, pp.17-22, 2005.06. |
| 21. |
Kazuki TAKENOUCHI, Akinori FURUKAWA, Kusuo OKUMA and Toshiaki SETOGUCHI, Tentative Study on Applicability of Wave Power Conversion Turbines to Tidal Power, Proceedings of the 8th World Renewable Energy Congress, 2004.09. |
| 22. |
川北和明，藤 智亮，竹之内和樹, 歩行機能のリハビリ支援・維持装置の開発
（第1報，設計仕様および機構と作動確認シミュレーション）, 日本設計工学会誌 設計工学, 第38巻, 第1号, pp.30-40, 2003.01. |
| 23. |
Kazuaki KAWAKITA, Kazuki TAKENOUCHI, Tomoaki FUJI, Ability of Sense of Feeling for Recognition of Shape and Size, Proceedings of the 10th International Conference on Geometry and Graphics, Vol.1, pp.355-358, 2002.07. |
| 24. |
古川明徳，大熊九州男，竹之内和樹, ダリウス形水車を用いた超低落差水力及び潮汐力発電, エネルギー・資源, Vol.23, No.2, pp.151-155., 2002.03. |
| 25. |
M. Samei, K. Takenouchi, T. Shimokawa and K. Kawakita, Modeling of Heat Transfer Phenomena with Air Existing in Fusing Region, Proceedings of International Conference on Digital Printing Technologies, pp.482-485., 1999.10. |
| 26. |
K. TAKENOUCHI, T. FUJI, T. TAKEYARI, N. WATANABE, A. IWAMA, K. KAWAKITA, Measurement of Ball Motion in a Ball-Type Limited Slip Differential Gear, Applied Mechanics and Engineering -Proceedings of the International Conference: Problems of Non-Conventional Bearing Systems-, Vol.4, pp.321-328, 1999.09. |
| 27. |
T. FUJI, K. TAKENOUCHI, S. ARIYOSHI, K. KAWAKITA, Experimental Study on Ball Motions in Thrust Ball Bearings, Applied Mechanics and Engineering -Proceedings of the International Conference: Problems of Non-Conventional Bearing Systems-, Vol.4, pp.311-316, 1999.09. |
| 28. |
醒井政博，下川拓夫，竹之内和樹，川北和明, トナー定着プロセスにおける温度場の数値予測, 日本画像学会誌, 第38巻，第1号，pp.26-34., 1999.04. |
| 29. |
K. Takenouchi, M. Samei, T. Shimokawa and K. Kawakita, Effects of Existing air on Fusing Temperature Field in Electrophotographic Printers, Proceedings of International Conference on Digital Printing Technologies, pp.466-469, 1998.10. |
| 30. |
M. Samei, T. Shimokawa, K. Takenouchi and K. Kawakita, Estimation of Temperature in Toner Fusing Field, Proceedings of International Conference on Digital Printing Technologies, pp.444-447., 1998.10. |
| 31. |
竹之内和樹，川北和明，藤 智亮，因 昭一, 運動療法のための機能工学的支援
−足首屈曲機能回復支援装置の開発と屈曲機能の諸特性−, ヒューマンサポートサイエンス, Vol.1, No.1, pp.17-22, 1998.09. |
| 32. |
川北和明，竹之内和樹，藤 智亮, 歩行関節の可動域拡大訓練装置の開発, ヒューマンサポートサイエンス, Vol.1, No.1, pp.12-16, 1998.09. |
| 33. |
醒井政博、下川拓夫、竹之内和樹、川北和明, トナー定着プロセスにおける伝熱現象（第2報，仮想エアギャップ層の実験的考察）, 設計工学, 33巻, 8号, 303-309, 1998.08. |
| 34. |
醒井政博、下川拓夫、竹之内和樹、川北和明, トナー定着プロセスにおける伝熱現象（第1報，定着領域の温度場の数値解析）, 設計工学, 33巻, 4号, 124-130, 1998.04. |
| 35. |
古川明徳、竹之内和樹、P.A. Gajanayake、大熊九州男
, 任意形状のダクト内に置かれたダリウス形ランナを通過する流れの計算, 日本機械学会論文集，B編, 62巻, 598号, 2144-2150, 1996.06. |
| 36. |
川北和明、竹之内和樹、横沼幹夫, 機械装置の操作特性に関する基礎的研究（第2報 調節操作特性に及ぼす諸影響因子）, 設計・製図, 29巻, 1号, 17-22, 1994.01. |
| 37. |
Yasuo TAKAMATSU, Akinori FURUKAWA, Kazuki TAKENOUCHI and Kusuo OKUMA, Experimental Considerations in an Approximate Method for Estimating the Blade Performance of Darrieus-Type Cross-Flow Water Turbines
, JSME International Journal, Ser.II, Vol.36, No.1, 135-142, 1993.02. |
| 38. |
Yasuo TAKAMATSU, Akinori FURUKAWA, Kusuo OKUMA and Kazuki TAKENOUCHI, Optimum Design of the Darrieus-Type Cross Flow Water Turbine for Low Head Water Power
, Renewable Energy, Pergamon Press, Vol.5, No.4, 2824-2828, 1992.09. |
| 39. |
川北和明、竹之内和樹、横沼幹夫, 機械装置の操作特性に関する基礎的研究（第1報 操作特性解析装置の設計・試作）, 設計・製図, 27巻, 6号, 248-251, 1992.06. |
| 40. |
Yasuo TAKAMATSU, Akinori FURUKAWA, Kusuo OKUMA, Kazuki TAKENOUCHI, Toshihiko SASAKI and Guo-hua ZHAO, Studies on Cavitation Occurring on the Runner Blade of a Darrieus-Type Water Turbine
, JSME International Journal, Ser.II, Vol.35, No.1, 46-52, 1992.02. |
| 41. |
川北和明、竹之内和樹、大石浩三, モデルエンジニアリングCADの開発（第1報 立体モデルの正投影図面への新変換手法）, 図学研究, 第23巻, 3号（通巻 第54号）, 3-8, 1991.12. |
| 42. |
髙松康生、古川明徳、竹之内和樹、大熊九州男
, ダリウス形横流水車の翼性能推算法に関する実験的考察, 日本機械学会論文集，B編, 57巻, 541号, 3110-3116, 1991.09. |
| 43. |
Yasuo TAKAMATSU, Akinori FURUKAWA, Kusuo OKUMA and Kazuki TAKENOUCHI, Experimental Studies on a Preferable Blade Profile for High Efficiency and the Blade Characteristics of Darrieus-Type Cross Flow Water Turbines
, JSME International Journal, Ser.II, Vol.34, No.2, 149-156, 1991.05. |
| 44. |
川北和明、竹之内和樹、大石浩三, プラント設計に於けるモデルエンジニアリングの有効性と問題, 図学研究, 第24巻, 3号（通巻 第51号）, 19-24, 1990.12. |
| 45. |
髙松康生、古川明徳、大熊九州男、竹之内和樹、佐々木俊彦、趙国華, ダリウス形横流水車のランナ翼の翼特性と高効率翼形状に関する実験的研究, 日本機械学会論文集，B編, 56巻, 528号, 2409-2415, 1990.08. |
| 46. |
髙松康生、古川明徳、大熊九州男、竹之内和樹、佐々木俊彦、趙国華, ダリウス形横流水車のランナ翼に発生するキャビテーションについて, 日本機械学会論文集，B編, 56巻, 527号, 2008-2013, 1990.07. |
| 47. |
髙松康生、古川明徳、大熊九州男、竹之内和樹, ダリウス形横流水車共の翼性能推算法に関する理論的考察, 日本機械学会論文集，B編, 53巻, 492号, 2507-2513, 1987.08. |
| 48. |
Yasuo TAKAMATSU, Akinori FURUKAWA, Kusuo OKUMA and Kazuki TAKENOUCHI, Effects of Geometrical Attitude of Blade on Hydrodynamic Performance of Darrieus-Type Cross-Flow Water Turbine
, Bulletin of Japan Society of Mechanical Engineers, Vol.28, No.240, 1092-1096., 1985.06. |
| 49. |
髙松康生、古川明徳、大熊九州男、竹之内和樹, ダリウス形横流水車の性能に及ぼす翼取付け姿勢の影響, 日本機械学会論文集，B編, 50巻, 458号, 2631-2634, 1984.10. |
