九州大学 研究者情報
論文一覧
齊藤 敬高(さいとう のりたか) データ更新日:2019.06.23

准教授 /  工学研究院 材料工学部門 材料反応工学


原著論文
1. Yusuke HARADA, Noritaka SAITO, and Kunihiko NAKASHIMA, “Impedance Measurement and Equivalent Circuit Analysis of Binary Alkali Silicate Melts”
, ISIJ International, 59 [3] pp.421–426 (2019), 2019.03.
2. Ahmad MALEKAN, Mohamad FARVIZI, Seyed Ehsan MIRSALEHI, Noritaka SAITO, and Kunihiko NAKASHIMA, “Influence of Bonding Time on the Transient Liquid Phase Bonding Behavior of Hastelloy X using Ni-Cr-B-Si-Fe Filler Alloy”
, Materials Science and Engineering: A, 755 pp.37-49 (2019), 2019.05.
3. Yuji IWAMI, Tetsuya YAMAMOTO, Nobuyuki OYAMA, Hidetoshi MATSUNO, Noritaka SAITO, and Kunihiko NAKASHIMA
, “Improvement of Sinter Productivity by Control of Magnetite Ore Segregation in Sintering Bed”
, ISIJ International, 58 [12] pp.2200-2209 (2018)
, 2018.12.
4. Nan YANG, Xing-Min GUO, Noritaka SAITO, Kunihiko NAKASHIMA, and Jie-Ting ZHAO
, “Effect of MgO on Formation and Crystallization Behaviors of Calcium Ferrite during Heating and Cooling Processes”
, ISIJ International, 58 [8] pp.1406-1412 (2018)
, 2018.08.
5. Yusuke HARADA, Hideaki YAMAMURA, Yoshiyuki UESHIMA, Toshiaki MIZOGUCHI, Noritaka SAITO, and Kunihiko NAKASHIMA, “Simultaneous Evaluation of Viscous and Crystallization Behaviors of Silicate Melts by Capacitance and Viscosity Measurements”, ISIJ International, 58 [7] pp.1285-1292 (2018), 2018.08.
6. Noritaka SAITO, “Crystallization Behavior of Molten Slags Characterized under Alternative Current Field”, Proceedings of the Seventh Asia Steel International Conference, pp.1-6, Hotel Mayfair Bhubaneswar, Bhubaneswar, Odisha, India, 2018.2.6-9., 2018.02.
7. Noritaka SAITO, “Evaluation of Oxide Melt Crystallization Characterized by Capacitance Measurement”
, Proceedings of ICMR2017, The Eighth International Conference on Materials Engineering for Resources, pp.83-88, Akita, Japan, 2017.10.25-27., 2017.10.
8. Yusuke HARADA, Noritaka SAITO, and Kunihiko NAKASHIMA, “Rheological Behavior of Foaming Slag”, Proceedings of EMECR2017, 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry, pp.550-551, Kobe International Conference Center, Kobe, Japan, 2017.10.11-13 , 2017.10.
9. Noritaka SAITO, Yusuke HARADA, and Kunihiko NAKASHIMA, “Quantifying Crystallinity of Oxide Melts by Electrical Capacitance Measurements”, Proceedings of The 2nd ISIJ-VDEh-Jernkontoret Joint Symposium (The 15th ISIJ-VDEh Seminar, The 9th Japan-Nordic Countries Joint Symposium on Science and technology of Process Metallurgy), pp.136-144, Jernkontoret, Stockholm, Sweden, 2017.6.12-16., 2017.06.
10. Yusuke HARADA, Masaki ISHIHARA, Noritaka SAITO, Kunihiko NAKASHIMA, Impedance Measurement of Simulated Foaming Slag for Evaluation of Gas Phase Fraction, ISIJ International, 57, 10, 2017.10.
11. Yusuke HARADA, Shoya SAKAGUCHI, Toshiaki MIZOGUCHI, Noritaka SAITO, Kunihiko NAKASHIMA, Shear Rate and Crystalline Phase Effects on the Super-Cooling Degree and Crystallization Behavior of CaO–SiO2–CaF2–RO(R = Mg, or Sr) Flux Systems, ISIJ International, 57, 8, 1312-1317, 2017.08.
12. 岩見友司, 山本哲也, 大山伸幸, 松野英寿, 齊藤敬高, 中島邦彦, 焼結層内におけるマグネタイトの偏析制御による焼結鉱の生産性改善, 鉄と鋼, 103, 6, 325-334, 2017.06.
13. Noritaka SAITO, Laura ESPOSITO, Toshio YONEIMA, Koichi HAYASHI, Kunihiko NAKASHIMA, Joining of UHTC Composites using Metallic Interlayer, Conference Proceedings of the Society for Experimental Mechanics Series, 10, 99-106, 2017.01.
14. Sohei SUKENAGA, Pierre FLORIAN, Koji KANEHASHI, Hiroyuki SHIBATA, Noritaka SAITO, Kunihiko NAKASHIMA, Dominique MASSIOT, Oxygen Speciation in Multicomponent Silicate Glasses Using Through Bond Double Resonance NMR Spectroscopy, The Journal of Physical Chemistry Letters
, 8, 2274-2279, 2017.01.
15. Yusuke HARADA, Noritaka SAITO, Kunihiko NAKASHIMA, Crystallinity of Supercooled Oxide Melts Quantified by Electrical Capacitance Measurements, ISIJ International
, 57, 1, 23-30, 2017.01.
16. Nan YANG, Noritaka SAITO, Kunihiko NAKASHIMA, The Effect of MgO on Wetting Behaviors of Calcium Ferrite Against Hematite Substrate, Proceedings of the 6th Australia-China-Japan Joint Symposium on Iron and Steelmaking, 2016.10.
17. Toshio YONEIMA, Kotaro FUKUSHIMA, Noritaka SAITO, Kunihiko NAKASHIMA, Effect of Sulfur on the Sintering of Nickel Particles, Materials Transactions, 57, 8, 1374-1377, 2016.08.
18. Sohei SUKENAGA, Koji KANEHASHI, Hiroyuki SHIBATA, Noritaka SAITO, Kunihiko NAKASHIMA, Structural Role of Alkali Cations in Calcium Aluminosilicate Glasses as Examined Using Oxygen-17 Solid-state Nuclear Magnetic Resonance Spectroscopy, Metallurgical and Materials Transactions, vol.47B, 4, 2177-2181, 2016.05.
19. Sohei SUKENAGA, Tomoyuki HIGO, Hiroyuki SHIBATA, Noritaka SAITO, Kunihiko NAKASHIMA, Surface Tension of CaO-SiO2-Al2O3-MgO Melts, Proceedings of Asia Steel International Conference 2015, 416-417, 2015.10.
20. Yusuke HARADA, Noritaka SAITO, Kunihiko NAKASHIMA, Quantitative Analysis for Crystallinity of Super-cooled Silicate Melt Characterized by Electrical Capacitance Measurement, Proceedings of Asia Steel International Conference 2015, 406-407, 2015.10.
21. Sohei SUKENAGA, Tomoyuki HIGO, Hiroyuki SHIBATA, Noritaka SAITO, Kunihiko NAKASHIMA, Effect of CaO/SiO2 Ratio on the Surface Tension of CaO-SiO2-Al2O3-MgO Melts, ISIJ International, 55, [6], 1299-1304, 2015.06.
22. Sohei SUKENAGA, Kosuke YASUTAKE, Noritaka SAITO, Kunihiko NAKASHIMA, Wettability of Graphite Substrates Against Molten CaO-SiO2-Al2O3-MgO Slags, Proceeding of ICSTI, 7th International Congress on the Science and Technology of Ironmaking, AISTech2015, 734-738, 2015.05.
23. 桐原史明, 助永壮平, 齊藤敬高, 中島邦彦, カルシウムシリケートスラグ中への固体石灰の溶解速度に及ぼす第三成分(アルミナ,マグネシアまたはフッ化カルシウム)の影響, 鉄と鋼, 100, [11], 1361-1370, 2014.11.
24. Yusuke HARADA, Kakeru KUSADA, Sohei SUKENAGA, Hideaki YAMAMURA, Yoshiyuki UESHIMA, Toshiaki MIZOGUCHI, Noritaka SAITO, Kunihiko NAKASHIMA, Effects of Agitation and Morphology of Primary Crystalline Phase on Crystallization Behavior of CaO–SiO2–CaF2 Supercooled Melts, ISIJ International, 54, [9], 2071-2076, 2014.09.
25. Kenta YAMASHITA, Sohei SUKENAGA, Michitaka MATSUO, Noritaka SAITO, Kunihiko NAKASHIMA, Rheological Behavior and Empirical Model of Simulated Foaming Slag, ISIJ International, 54, [9], 2064-2070, 2014.09.
26. Tomoyuki HIGO, Sohei SUKENAGA, Koji KANEHASHI, Hiroyuki SHIBATA, Takeshi Osugi, Noritaka SAITO, Kunihiko NAKASHIMA, Effect of Potassium Oxide Addition on Viscosity of Calcium Aluminosilicate Melts at 1673–1873 K, ISIJ International, 54, [9], 2039-2044, 2014.09.
27. Tomoyuki HIGO, Sohei SUKENAGA, Noritaka SAITO, Kunihiko NAKASHIMA, Experimental Evaluation and Empirical Modeling of the Rheological Behavior of Dual-phase Fluids, Proceedings of Shechtman International Symposium, 2nd International Symposium on Advanced Sustainable Iron and Steel Making, vol.3, 349-358, 2014.06.
28. Laura ESPOSITO, Diletta SCITI, Laura SILVESTRONI, Cesare MELANDRI, Stefano GUICCIARDI, Noritaka SAITO, Kunihiko NAKASHIMA, Andreas M. GLAESER, Transient Liquid Phase Bonding of HfC-based Ceramics, Journal of Materials Science, 49, 2, 654-664, 2014.02.
29. Noritaka SAITO, Kenta YAMASHIMA, Sohei SUKENAGA, Kunihiko NAKASHIMA, Viscosity Evaluation of Slag Foam, Proceedings of 8th International Symposium on Advanced Science and Technology in Experimental Mechanics, 043, 2013.11.
30. Sohei SUKENAGA, Tomoyuki HIGO, Hiroyuki SHIBATA, Noritaka SAITO, Kunihiko NAKASHIMA, Effect of K2O Addition on the Viscosity of CaO-SiO2-Al2O3-K2O Melt, Mineralogical Magazine, 77, 5, 2283-2283, 2013.05.
31. Sohei SUKENAGA, Takeshi OSUGI, Yosuke INATOMI, Noritaka SAITO, Kunihiko NAKASHIMA, Effect of Oxygen Partial Pressure on the Viscosity of Iron-Bearing Alkaline-Earth Silicate Slags, Journal of MMIJ, 129, 5, 203-207, 2013.05.
32. Takeshi OHSUGI, Sohei SUKENAGA, Yosuke INATOMI, Yoshiaki GONDA, Noritaka SAITO, Kunihiko NAKASHIMA, Effect of Oxidation State of Iron Ions on the Viscosity of Alkali Silicate Melt, ISIJ International, 53, 2, 185-190, 2013.03.
33. Hadi Razavi KHOSROSHAHI, Xin LIU, Noritaka SAITO, Kunihiko NAKASHIMA, and Kenji KANEKO, Effect of Nano-sized particles on the Mechanical properties of Y2O, Materials Science Forum vol.750 Proceedings of IFAMST-8 The 8th International Forum on Advanced Materials Science and Technology, 44-47, 2013.03.
34. Noritaka SAITO, Kakeru KUSADA, Sohei SUKENAGA, Yoshio OHTA, and Kunihiko NAKASHIMA, Effect of Agitation on Crystallization Behavior of CaO–SiO2–R2O (R = Li, Na, or K) System Characterized by Electrical Capacitance Measurement, ISIJ International, 52, [12], pp.2123-2129, 2012.12.
35. Diletta SCITI, Laura SILVESTRONI, Laura ESPOSITO, Kunihiko NAKASHIMA, Noritaka SAITO, Yoshinori YAMAOKA, and Andreas M. GLAESER, Advances in Transient-Liquid-Phase Bonding of Ultra-high Temperature ZrC Ceramics, High Temperature Materials and Process, 31, [4-5], pp.501-511, 2012.12.
36. Sohei SUKENAGA, Kakeru KUSADA, Noritaka SAITO, and Kunihiko NAKASHIMA, Capacitance Measurement of Molten Calcium Silicate under Shear Stress Field, High Temperature Materials and Process, 31, [4-5], pp.459-463, 2012.12.
37. Noritaka SAITO, Hiroyuki IKEDA, Andreas M. GLAESER, Kunihiko NAKASHIMA, Wettability and transient liquid phase bonding of hafnium diboride composite with Ni-Nb alloys, Journal of Materials Science, 10.1007/s10853-012-6778-3, 47, [24], pp.8454-8463, 2012.10.
38. Hadi Razavi KHOSROSHAHI, Hiroyuki IKEDA, Kazuhiro YAMADA, Noritaka SAITO, Kenji KANEKO, Koichi HAYASHI, Kunihiko NAKASHIMA, Effect of Cation Doping on Mechanical Properties of Yttria Prepared by an Optimized Two-Step Sintering Process, Journal of American Ceramic Society, 95, [10], pp.3263-3269, 2012.10.
39. Yoshinori YAMAOKA, Tetsuya SEIKE, Sohei SUKENAGA, Noritaka SAITO, Kunihiko NAKASHIMA, Low-Temperature Sintering of Silicon Nitride Ceramics Using Oxynitride Sintering Aid, Journal of MMIJ, 128, [7], 487-491, 2012.07.
40. Tomoko SUGIMURA, Tetsushi DEURA, Koichi SAKAMOTO, Sohei SUKENAGA, Noritaka SAITO and Kunihiko NAKASHIMA, Effect of Li2O Addition on Crystallization Behavior of CaO–Al2O3–MgO Based Inclusions, ISIJ International, 51, 12, pp.1982-1986, 2011.12.
41. Shinichiro HARUKI, Sohei SUKENAGA, Noritaka SAITO and Kunihiko NAKASHIMA, Viscosity Estimation of Spherical Particles Dispersed Suspension, High Temperature Materials and Process, 30, 4, pp.405-410, 2011.09.
42. Sohei SUKENAGA, Shinichiro HARUKI, Yoshitaka NOMOTO, Noritaka SAITO and Kunihiko NAKASHIMA, Density and Surface Tension of CaO-SiO2-Al2O3-R2O(R=Li, Na, K) Melts, ISIJ International , 51, [8], 1285-1289, 2011.08.
43. Yoshikazu TOMIOKA, Sohei SUKENAGA, Noritaka SAITO and Kunihiko NAKASHIMA, Phase Separation Behavior and Coloring of Coating Glasses for Sanitary Ware, Materials Science and Engineering vol.18 Proceedings of 3rd International Congress on Ceramics, 18, 112021 pp.1-4, 2011.07.
44. Sohei SUKENAGA, Tetsuya NAGAHISA, Koji KANEHASHI, Noritaka SAITO and Kunihiko NAKASHIMA, Reconsideration on Al Coordination in CaO–SiO2–Al2O3–(R2O or RO) Glasses by Using High Field Solid-State 27Al NMR Spectroscopy, ISIJ International , 51 , [2] , pp.333-335, 2011.02.
45. Sohei SUKENAGA, Yoshiaki GONDA, Noritaka SAITO and Kunihiko NAKASHIMA, Viscosity of Iron Oxide Containing Slag, Proceedings of the 7th Japan-Korea Workshop on Science and Technology of Ironmaking and Steelmaking, pp.104-113, 2011.01.
46. Tomoyasu ICHIKI, Takahiro HINO, Seiji MIYAMOTO, Kotaro FURUKAWA, Noritaka SAITO, Kunihiko NAKASHIMA, Effect of Glass Composition on Formation of Double Layer Consisted of Conventional Glaze and Glass for Sanitary Ware, Journal of MMIJ , 126 , 12, pp.691-696, 2010.12.
47. Tomoyuki KATAYAMA, Sohei SUKENAGA, Noritaka SAITO, Hajime KAGATA and Kunihiko NAKASHIMA, Fabrication of Al2O3-W Functionally Graded Materials by Slipcasting Method, Proceedings of 3rd International Congress on Ceramics, 2010.12.
48. Noritaka SAITO, Kakeru KUSADA, Sohei SUKENAGA, and Kunihiko NAKASHIMA, Effect of Shear Stress on Crystallization Behavior of CaO-SiO2-R2O (R=Li, Na, or K) melts, Proceedings of the 2nd International Symposium on Thermal Design and Thermophysical Property for Electronics and Energy, pp.134-136, 2010.12.
49. Noritaka SAITO, Kakeru KUSADA, Sohei SUKENAGA and Kunihiko NAKASHIMA, Effect of Shear Stress on Crystallization Behavior of Molten Calcium Silicates, Proceedings of 8th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries, pp.154-158, 2010.11.
50. Sung M. HONG, Christopher C. BARTLOW, Thomas B. REYNOLDS, Noritaka SAITO and Andreas M. GLAESER, Ultrarapid Transient-Liquid-Phase Bonding of Advanced Ceramics, Advances in Science and Technology vol.64 Proceedings of CIMTEC 2010 12th International Ceramics Congress, 64, pp.88-97, 2010.10.
51. 春木慎一郎, 徳永博文,助永壮平,齊藤敬高,中島邦彦, M2O-TeO2(M=Li, Na and K)系融体の密度および表面張力, 日本金属学会誌, 74 , 10, pp.629-634, 2010.10.
52. Takeshi TAKAKI, Keiko KUROSAWA, Razavi HADI, Sohei SUKENAGA, Noritaka SAITO, Kenji KANEKO, Kunihiko NAKASHIMA and Taisei Hiraaki, Electrolytic synthesis of Al-doped ZnO nanopowders with low electrical resistivity, Journal of American Ceramic Society, 93, 10, pp.3088-3091, 2010.10.
53. Takeshi TAKAKI, Keiko KUROSAWA, Sohei SUKENAGA, Noritaka SAITO, Hadi RAZAVI, Kenji KANEKO and Kunihiko NAKASHIMA, Electrolytic synthesis of Al-doped ZnO powders with low electrical resistivity, Proceedings of 17th International Microscopy Congress, M9.23, 2010.09.
54. Hadi RAZAVI, Kazuhiro YAMADA, Tomoyuki KATAYAMA, Noritaka SAITO, Kunihiko NAKASHIMA and Kenji KANEKO, Fabrication and Characterization of Mo-SiO2 Composite, Proceedings of 17th International Microscopy Congress, M9.24, 2010.09.
55. Shinichiro HARUKI, Sohei SUKENAGA, Noritaka SAITO and Kunihiko NAKASHIMA, Viscosity Evaluation of Solid Phase Containing Slag, Proceedings of International Organized Session High Temperature Processes, Thermodynamics and kinetics for environmentally harmonious refining processes with high speed and efficiency, Current Advances in Materials and Processes, pp.823-826, 2010.09.
56. 助永壮平 ,永久哲也,権田義明,齊藤敬高,中島潤二,中島邦彦 , 酸化鉄含有多元系スラグの粘度, 鉄と鋼, 96, 8, pp.469-474, 2010.08.
57. Noritaka SAITO, Shin-ichi NISHIMURA, Michio KAWANO, Shin-ichi ARAKI, Sohei SUKENAGA and Kunihiko NAKASHIMA, Fabrication of Nitrogen Containing Cordierite Ceramics, Journal of American Ceramic Society, 2010.08.
58. Takeshi TAKAKI, Keiko KUROSAWA, Sohei SUKENAGA, Noritaka SAITO, Hadi RAZAVI, Kenji KANEKO, Kunihiko NAKASHIMA, E. OKUNISHI and Taisei HIRAAKI, Electrolytic synthesis of Al-doped ZnO powders with low electrical resistivity, International Journal of Advanced Microscopy and Theoretical Calculations, 2, pp.266-267, 2010.06.
59. Hadi RAZAVI, Kazuhiro YAMADA, Tomoyuki TAKAYAMA, Noritaka SAITO, Kunihiko NAKASHIMA and Kenji KANEKO, Fabrication and Characterization of Mo-SiO2 Composite, International Journal of Advanced Microscopy and Theoretical Calculations, 2, pp.248-249, 2010.06.
60. 徳永博文,春木慎一郎,助永壮平,齊藤敬高,中島邦彦, M2O–TeO2(M=Li, Na and K)系融体の粘度および屈折率, 日本金属学会誌 , 74 , [5] , pp.331-336, 2010.05.
61. Sohei SUKENAGA, Yoshiaki GONDA, Shinji YOSHIMURA, Noritaka SAITO and Kunihiko NAKASHIMA, Viscosity Measurement of Calcium Ferrite Based Slags during Structural Relaxation Process, ISIJ International , 50, 2, pp.195-199, 2010.02.
62. Yoshinori YAMAOKA, Shinichi ARAKI, Sohei SUKENAGA, Noritaka SAITO, Toshikazu YASUKOUCHI, Kunihiko NAKASHIMA, Fabrication of Nitrogen-Containing Cordierite Ceramics, Journal of MMIJ, 126, 1,2, pp.38-43, 2010.01.
63. 助永壮平,春木慎一郎,山岡由宗,齊藤敬高,中島邦彦, 回転円筒法によるマルチフェーズフラックスの粘性評価, 鉄と鋼, 95, 3, 282-288, 2009.12.
64. Yoshiaki GONDA, Shinji YOSHIMURA, Noritaka SAITO and Kunihiko NAKASHIMA, Effect of Thermal History on the Viscosity of Calcium Ferrite based Melts, Proceedings of the 11th International Symposium on Materials Science and Engineering between Chonbuk National University and Kyushu University, No.11, 2009.11.
65. Shinji YOSHIMURA, Keiko KUROSAWA, Yoshiaki GONDA, Sohei SUKENAGA, Noritaka SAITO and Kunihiko NAKASHIMA, Penetration Behavior of Calcium Ferrite Melts into Hematite Substrate, ISIJ International, 49, 5, 287-692, 2009.05.
66. Noritaka SAITO, Daiji NAKATA, Kenji FUJIMOTO, Sohei SUKENAGA, Tomoyasu ICHIKI and Kunihiko NAKASHIMA, Viscosity Measurement of RE-Mg-Si-O-N (RE=Y, Gd, Nd and La) Melts and 29Si MAS-NMR Study of Glasses, Proceedings of 10th International Conference and Exhibition of the European Ceramic Society, 2009.04.
67. 齊藤敬高,吉村慎二,春木慎一郎,山岡由宗,助永壮平,中島邦彦, CaO-SiO2-R2O (R=Li, Na and K)系マルチフェイズフラックスの粘性評価, 鉄と鋼, 95 [3] pp.282-288 , 2009.03.
68. Sohei SUKENAGA, Yoshinori YAMAOKA, Noritaka SAITO and Kunihiko NAKASHIMA, Viscosity and Structure of Quaternary Aluminosilicate Melts, Proceedings of The 8th International Conference on Molten Slags, Fluxes and Salts, pp.195-204, 2009.01.
69. Sohei SUKENAGA, Noritaka SAITO, Junji NAKASHIMA and Kunihiko NAKASHIMA, Viscosity of Steel-making Slag Containing Iron Oxide, Proceedings of The 4th International Congress on the Science and Technology of Steelmaking, pp.562-565, 2008.10.
70. Noritaka SAITO, Daiji NAKATA, Sohei SUKENAGA and Kunihiko NAKASHIMA, Viscosity Measurement of molten RE-Mg-Si-O-N (RE=Y, Gd, Nd and La) Glasses, Key Engineering Materials vol. 287 “SiAlONs and Non-oxides” Proceedings of 2nd International Symposium on SiAlONs and non-Oxides, pp.69-72, 2007.12.
71. 齊藤敬高,西村信也,助永壮平,清水史幸,高木健,中島邦彦,柳ヶ瀬 勉, Hot-Thermocouple法を用いた廃棄物溶融スラグの結晶化挙動の評価, 日本素材物性学会誌, 20 [2] pp.29-33, 2007.12.
72. 助永壮平,中田大司,一木智康,齊藤敬高,中島邦彦, RE-Mg-Si-O-N (RE = Y, Gd, Nd and La) 系融体の粘度, 日本金属学会誌, 71 [11] pp.1050-1056, 2007.11.
73. Noritaka SAITO and Kunihiko NAKASHIMA, Low-Temperature Sintering of Silicon Nitride using Oxynitride Sintering Aid, Proceedings of the 9th International Symposium on Materials Science and Engineering between Chonbuk National University and Kyushu University, No.3, 2007.10.
74. Ayumu UMEMOTO, Koichi HAYASHI, Kyoko HAYANO, Noritaka SAITO, Kenji KANEKO and Kunihiko NAKASHIMA, Effect of Mo Powder Surface Condition on Fabrication of Mo-SiO2 Functionally Graded Materials with Slipcasting Method, Ceramic Transactions 198, Characterization and Control of Interfaces for High Quality Advanced Materials II, Proceedings of the 2nd International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and Joining Technology for New Metallic Glasses and Inorganic Materials, pp.219-224, 2007.07.
75. Kunihiko NAKASHIMA, Noritaka SAITO, Kenji KANEKO, Ayumu UMEMOTO and Koichi HAYASHI, Fabrication of Mo-SiO2 Functionally Graded Materials by Slip-casting Method, International Conference on Mining, Materials, and Petroleum Engineering: The Frontiers of Technology (ICFT-2007), pp.153-156, 2007.05.
76. 徳永博文,井手口悟,清水史幸,齊藤敬高,中島邦彦, RE2O3MgO-SiO2 (RE=Y, Gd, Nd and La)系融体の表面張力および窒化ケイ素との濡れ性, 日本金属学会誌, 71 [5] pp.445-451, 2007.05.
77. Sohei SUKENAGA, Noritaka SAITO, Kiyoshi KAWAKAMI and Kunihiko NAKASHIMA, Viscosity Measurements of CaO-SiO2-Al2O3-(R2O or RO) Quaternary Melts and MAS-NMR Study of Glasses, Proceedings of the 4th International Congress on Science and Technology of Ironmaking, pp452-455, 2006.12.
78. Hirofumi TOKUNAGA, Noritaka SAITO, Shigeru FUJINO and Kunihiko NAKASHIMA, Density, Surface Tension and Viscosity of Alkali Tellurite Glass Melts, Proceedings of the 8th International Symposium on Materials Science and Engineering between Kyushu University and Chonbuk National University, No.4, 2006.10.
79. Ayumu UMEMOTO, Koichi HAYASHI, Kunihiko NAKASHIMA, Noritaka SAITO, Kenji KANEKO and Keisaku OGI, Mo-SiO2 Functionally Graded Materials for High Intensity Discharge Lamps, Ceramic Transactions 192, Developments and Applications of Advanced Engineering Ceramics and Composites, Proceedings of 6th Pacific Rim Conference on Ceramic and Glass Technology, pp. 53-58, 2006.06.
80. Noritaka SAITO, Daiji NAKATA, Kunihiko NAKASHIMA and Ayumu UMEMOTO, Grain Growth of β-Silicon Nitride in RE-Mg-Si-O-N Liquid, Ceramic Transactions 192, Developments and Applications of Advanced Engineering Ceramics and Composites, Proceedings of 6th Pacific Rim Conference on Ceramic and Glass Technology, pp. 73-80, 2006.06.
81. Fumiyumi SHIMIZU, Hirofumi TOKUNAGA, Noritaka SAITO and Kunihiko NAKASHIMA, Viscosity and Surface Tension Measurements of RE2O3-MgO-SiO2 (RE=Y, Gd, Nd and La) Melts, ISIJ International, 46 [3] pp.388-393, 2006.03.
82. Sohei SUKENAGA, Noritaka SAITO, Kiyoshi KAWAKAMI and Kunihiko NAKASHIMA, Viscosities of CaO-SiO2-Al2O3- (R2O or RO) Melts, ISIJ International, 46 [3] pp.352-358, 2006.03.
83. Ayumu UMEMOTO, Koichi HAYASHI, Kunihiko NAKASHIMA, Noritaka SAITO, Kenji KANEKO, High-Intensity Discharge Lamp with Mo-SiO2 Functionally Graded Material, Journal of American Ceramic Society, 89 [3] pp.1133-1135, 2006.03.
84. Kunihiko NAKASHIMA and Noritaka SAITO, Mo-SiO2 Functionally Graded Materials for High Intensity Discharge Lamps, Proceedings of the 7th International Symposium on Materials Science and Engineering between Kyushu University and Chonbuk National University, No.1, 2005.11.
85. Kunihiko NAKASHIMA, Sohei SUKENAGA, Noritaka SAITO and Kiyoshi KAWAKAMI, Viscosities of CaO-SiO2-Al2O3-(R2O or RO) Quaternary Melts glasses, Proceedings of the 3rd Japan-Korea Workshop on Science and Technology of Ironmaking and Steelmaking, 2005.11.
86. Noritaka SAITO, Sohei SUKENAGA, Kunihiko NAKASHIMA and Kiyoshi KAWAKAMI, Viscosities of CaO-SiO2-Al2O3-R2O Melts and Structural Characterizations of glasses, Proceedings of International Organized Session High Temperature Processes, Physical properties of melts at high temperature relevant to iron and steelmaking, Current Advances in Materials and Processes, pp.826-829, 2005.09.
87. Kunihiko NAKASHIMA, Souhei SUKENAGA and Noritaka SAITO, Effect of Additive Oxides on the viscosities of CaO-SiO2-Al2O3 Melts, Proceedings of The 7th Nordic-Japan Symposium Science and Technology of Process Metallurgy, pp.11:1-11:11, 2005.09.
88. 中田大司,齊藤敬高,梅本歩,中島邦彦, RE(RE=Y, Gd, Nd and La)-Mg-Si-O-N系融体中におけるβ-窒化ケイ素の結晶成長, 日本金属学会誌, 69 [8] pp.719-722, 2005.08.
89. 齊藤敬高,中田大司,梅本歩,中島邦彦, MgO-SiO2系融体の液相線温度および粘度に及ぼすRE2O3 (RE=Y, Gd, Nd and La)添加の影響, 日本金属学会誌, 69 [1] pp.152-158, 2005.01.
90. Kunihiko NAKASHIMA, Noritaka SAITO, Shunsuke SHINOZAKI, Ryuji TANAKA, Takayuki MAEDA, Masakata SHIMIZU and Katsumi MORI, Wetting and Penetration Behavior of Calcium Ferrite Melts to Sintered Hematite, ISIJ Internatioinal, 10.2355/isijinternational.44.2052, 44, 12, 2052-2056, vol.44 [12] pp.2052-2056, 2004.12.
91. 齊藤敬高,塩田真一,梅本歩,中島邦彦, RE(RE=Y,Gd,Nd and La)-Mg-Si-O-N系融体中への窒化ケイ素の溶解度および同系ガラスの硬度, 日本金属学会誌, 68 [8] pp.519-522, 2004.08.
92. Toshihiro TANAKA, Masashi NAKAMOTO, Kunihiko NAKASHIMA and Noritaka SAITO, High Temperature Properties of Metallurgical System and Simulation, Proceedings of Australia-Japan Iron & Steelmaking Symposium, pp.1-12, 2004.07.
93. Noritaka SAITO, Daiji NAKATA, Ayumu UMEMOTO and Kunihiko NAKASHIMA, Grain Growth of β-Silicon Nitride in RE-Mg-Si-O-N Liquid, Key Engineering Materials “Advanced Si-Based Ceramics and Composites” Proceedings of ISASC-2004, International Symposium on New Frontier of Advanced Si-Based Ceramics and Composites, 287, 265-270, vol. 287 pp.265-270, 2004.06.
94. 齊藤敬高,助永壮平,田堀裕子,中島邦彦, CaO-Al2O3-SiO2系スラグの粘度に及ぼすアルカリ酸化物添加の影響, 溶融塩および高温化学, 47 [3] pp.140-148, 2004.03.
95. Noritaka SAITO, Kunihiko NAKASHIMA and Katsumi MORI, Physical Properties of RE2O3-MgO-SiO2 Melts, Proceedings of the 5th International Symposium on Materials Science and Engineering between Kyushu University and Chonbuk National University, No.11, 2003.10.
96. Kunihiko NAKASHIMA,Noritaka SAITO,Naoto HORI,Ryuji TANAKA and Katsumi MORI, Physical Properties of Calcium Ferrite Melts, Proceedings of Science and Technology of Innovative Ironmaking for Aiming at Energy Half Consumption, pp.67-70, 2003.11.
97. Noritaka SAITO, Naoto HORI, Kunihiko NAKASHIMA and Katsumi MORI, Viscosity of Blast Furnace Type Slags, Metallurgical and Materials Transactions, 10.1007/s11663-003-0018-9, 34, 5, 509-516, vol.34B pp.509-516, 2003.10.
98. Kunihiko NAKASHIMA,Katsumi MORI,Noritaka SAITO,Naoto HORI and Ryuji TANAKA, Some Physical Properties of Calcium Ferrite Melts, METEC Congress 03, 3rd International Conference on Science and Technology of Ironmaking, 2003.06.
99. Noritaka SAITO, Kentaro KAI, Shingo FURUSHO, Kunihiko NAKASHIMA, Fumiyuki SHIMIZU and Katsumi MORI, Properties of Nitrogen-Containing Yttria-Alumina-Silica Melts and Glasses, Journal of American Ceramic Society, 86, 4, 711-716, 86 [4] pp.711-716, 2003.04.
100. Noritaka SAITO, Naoto HORI, Kunihiko NAKASHIMA and Katsumi MORI, Effect of Additive Oxide on the viscosities of CaO-SiO2-Al2O3 and CaO-Fe2O3 Melts, High Temperature Materials and Process, 22, 3-4, 129-139, vol.22 pp.129-139, 2003.04.
101. 齊藤敬高,甲斐健太郎,古荘慎吾,清水史幸,中島邦彦,森克巳, 窒素含有Y2O3-Al2O3-SiO2系融体の粘度およびガラスの硬度, 日本金属学会誌, 67 [1] pp.40-46, 2003.01.
102. Noritaka SAITO,Naoto HORI,Kunihiko NAKASHIMA and Katsumi MORI, Viscosity of Blast Furnace Type Slags, Mills Symposium on Metals, Slags, Glasses: High Temperature Properties and Phenomena, 10.1007/s11663-003-0018-9, 34, 5, 509-516, vol.2 pp.477-485, 2002.08.
103. 佐藤崇,齊藤敬高,中島邦彦,森克巳,平昭大成, 焼却残渣の溶融処理とスラグの粘度, 資源処理技術, 49 [3] pp.128-133, 2002.03.

九大関連コンテンツ

pure2017年10月2日から、「九州大学研究者情報」を補完するデータベースとして、Elsevier社の「Pure」による研究業績の公開を開始しました。
 
 
九州大学知的財産本部「九州大学Seeds集」