化学工学会　粒子・流体プロセス部会　動画賞（研究部門）

2017.3   化学工学会　粒子・流体プロセス部会   二軸スクリュ溶融混練における混練エレメントの形状と混練性能の関係

九州大学工学講義賞

2016.11   九州大学工学部  

日本レオロジー学会賞

2015.5   日本レオロジー学会   高分子およびガラスの成形加工プロセスにおける複合化技術に関する研究

第8回PM研究促進展奨励賞

2010.11   日本粉末冶金工業会   平成22年度PM研究促進展における大変有意義な研究に対する賞

プラスチック成形加工学会功労者表彰

2008.6   プラスチック成形加工学会   学会の活動に顕著な功績があった会員に対する賞

化学工学会　粒子・流体プロセス部会　第1回粒子・流体プロセス賞

2003.3   化学工学会　粒子・流体プロセス部会   多成分膜の乾燥過程における相構造形成に対する講演論文に対する賞

日本レオロジー学会有功賞

1999.6   日本レオロジー学会   レオロジー分野における，顕著な研究業績をあげた会員に対する賞

プラスチック成形加工学会功労者表彰

1999.6   プラスチック成形加工学会   学会の設立から10年間，学会の活動に顕著な功績があった会員に対する賞

プラスチック成形加工学会論文賞

1994.6   プラスチック成形加工学会   二軸スクリュ押出機内の三次元樹脂流動シミュレーション手法の開発に関する論文に対する賞

薄膜多層被覆電線用クロスヘッドの分配流路設計手法 Reviewed

加賀雅文, 藤本憲一朗，梶原稔尚

成形加工   32 ( 8 )   2020.8

A bioartificial liver device based on three-dimensional culture of genetically engineered hepatoma cells using hollow fibers Reviewed

Yusuke Fujii, Kengo Higashi, Hiroshi Mizumoto, Masamichi Kamihira, Toshihisa Kajiwara

Cytotechnology   72 ( 2 )   227 - 237   2020.4

Effects of viscoelasticity on shear-thickening in dilute suspensions in a viscoelastic fluid Reviewed

Yuki Matsuoka, Yasuya Nakayama, Toshihisa Kajiwara

Soft Matter   16 ( 3 )   728 - 737   2020

Expansion and differentiation of human iPS cells in a three-dimensional culture using hollow fibers and separation of the specific population by magnetic-activated cell sorting. Reviewed International journal

Sakiko Matsushita, Toshihisa Kajiwara, Hiroshi Mizumoto

Journal of Bioscience and Bioengineering   128 ( 4 )   480 - 486   2019.10

Mixing characteristics of different kneading elements An experimental study

Yasuya Nakayama, Satoshi Esaki, Kenta Nakao, Toshihisa Kajiwara, Takahide Takeuchi, Koichi Kimura, Hideki Tomiyama

33rd International Conference of the Polymer Processing Society, PPS 2017 Proceedings of PPS 2017 33rd International Conference of the Polymer Processing Society - Conference Papers   2019.8

Partially Filled Flow Simulation Using Meshfree Method for High Viscosity Fluid in Plastic Mixer Reviewed

K. Sekiyama, S. Yamada, T. Nakagawa, Y. Nakayama, T. Kajiwara

International Polymer Processing   34 ( 2 )   279 - 289   2019.5

Partially filled flow simulation using meshfree method for high viscosity fluid in plastic mixer Reviewed

Kazuhide Sekiyama, S. Yamada, T. Nakagawa, Y. Nakayama, T. Kajiwara

International Polymer Processing   34 ( 2 )   279 - 289   2019.4

Characterization of melt-mixing in extrusion: finite-time Lyapunov exponent and flow pattern structure Reviewed

Yasuya Nakayama, Takemitsu Hiroki, Toshihisa Kajiwara, Koichi Kimura, Takeuchi Takahide and Hideki Tomiyama

AIP Conf. Proc.   2065   30032   2019.2

Characterization of melt-mixing in extrusion Finite-time Lyapunov exponent and flow pattern structure

Yasuya Nakayama, Takemitsu Hiroki, Toshihisa Kajiwara, Koichi Kimura, Takeuchi Takahide, Hideki Tomiyama

34th International Conference of the Polymer Processing Society, PPS 2018 Proceedings of PPS-34 34th International Conference of the Polymer Processing Society - Conference Papers   2019.2

Shear-thickening in a dilute suspension of spheres in a weakly viscoelastic fluid: an approach with a direct numerical simulation International journal

Yuki Matsuoka, Yasuya Nakayama, Toshihisa Kajiwara

Proceedings of Soft Matter Physics: from the perspective of the essential heterogeneity   2018.12

Mixing Characteristics of Different Kneading Elements: an Experimental Study Reviewed International journal

Yasuya Nayakaya, Satoshi Esaki, Kenta Nakao, Toshihisa Kajiwara, Takahide Takeuchi, Koichi Kimura, Hideki Tomiyama

AIP Conf. Proc.   2018.12

EVALUATION OF DISTRIBUTIVE MIXING PERFORMANCE OF FIN TYPE SCREW FOR A SINGLE SCREW EXTRUDER International journal

Koichi Kimura, Yasuya Nakayama, Toshihisa Kajiwara

Proceedings of Asian Workshop on Polymer Processing 2018 (AWPP2018)   2018.12

MIXING CHARACTERISTICS OF DIFFERENT KNEADING ELEMENTS IN A TWIN-SCREW EXTRUDER: A NUMERICAL STUDY AND AN EXPERIMENTAL VERIFICATION International journal

Yasuya Nakayama, Hiroki Takemitsu, Satoshi Esaki, Toshihisa Kajiwara, Koichi Kimura, Takeuchi Takahide, Tomiyama Hideki

Proceedings of Asian Workshop on Polymer Processing 2018 (AWPP2018)   2018.12

Impacts of Pitched Tips of Kneading Element in Twin-Screw Extrusion: Tuning Flow Pattern and Mixing Performance International journal

Yasuya Namayama, Hiroki Takemitsu, Toshihisa Kajiwara, Koichi Kimura, Takeuchi Takahide, Tomiyama Hideki

2018.9

単軸押出機のフィン型混練スクリュの分配混合性能評価 Reviewed

木村公一, 富山秀樹, 名嘉山祥也, 梶原稔尚

30 ( 8 )   445 - 451   2018.8

Nonlinear Electrophoresis in the Salt-free Limit International journal

Kei Ito, Yasuya Nakayama, Toshihisa Kajiwara

Proceedings of the 7th Pacific Rim Conference on Rheology (PRCR 2018)   2018.6

Evaluation of Distributive Mixing Performance of Fin Type Screw for Single-Screw Extruder International journal

Koichi Kimura, Hideki Tomiyama, Yasuya Namayama, Toshihisa Kajiwara

Proceedings of the Polymer Processing Society 34th Annual Meeting (PPS-34)   2018.5

Characterization of melt-mixing in extrusion: finite-time Lyapunov exponent and flow pattern structure International journal

Yasuya Namayama, Hiroki Takemitsu, Toshihisa Kajiwara, Koichi Kimura, Takahide Takeuchi, Hideki Tomiyama

Proceedings of the Polymer Processing Society 34th Annual Meeting (PPS-34)   2018.5

Improving mixing characteristics with a pitched tip in kneading elements in twin-screw extrusion Reviewed International journal

Sakiko Matsushita, Toshihisa Kajiwara, Hiroshi Mizumoto

AIChE J.   64 ( 4 )   1424 - 1434   2018.4

Improving mixing characteristics with a pitched tip in kneading elements in twin-screw extrusion Reviewed

Yasuya Nakayama, Hiroki Takemitsu, Toshihisa Kajiwara, Koichi Kimura, Takahide Takeuchi, Hideki Tomiyama

AIChE Journal   64 ( 4 )   1424 - 1434   2018.4

Evaluation of hollow fiber culture for large-scale production of mouse embryonic stem cell-derived hematopoietic stem cells Reviewed International journal

Yu Nakano, Shinya Iwanaga, Hiroshi Mizumoto, Toshihisa Kajiwara

Cytotechnology   1 - 8   2018.3

In vitro and ex vivo Functional Evaluation of a Hollow Fiber-type Bioartificial Liver Module Containing ES Cell-derived Hepatocyte-like Cells Reviewed International journal

Hiroshi Mizumoto, Naoki Amimoto, Toru Miyazawa, Hideki Tani, Kaoru Ikeda, Toshihisa Kajiwara

Advanced Biomedical Engineering   7 ( 0 )   18 - 27   2018.1

Mixing characteristics of different kneading elements: An experimental study International journal

Toshihisa Kajiwara, Yasuya Namayama, Hiroki Takemitsu, Satoshi Esaki, Takahide Takeuchi, Koichi Kimura, Hideki Tomiyama

Proceedings of the Polymer Processing Society 33rd Annual Meeting (PPS-33)   2017.12

単軸混練スクリュの分配混合性能の評価 Reviewed

木村公一, 富山秀樹, 名嘉山祥也, 梶原稔尚

日本製鋼所技報   68   110 - 116   2017.11

Impacts of Pitched Tips of Kneading Element in Twin-Screw Extrusion: Tuning Flow Pattern and Mixing Performance International journal

Yasuya Nakayama, Hiroki Takemitsu, Toshihisa Kajiwara, Koichi Kimura, Takahide Takeuchi, Hideki Tomiyama

Proceedings of the Asian Workshop on Polymer Processing 2017 (AWPP2017)   2017.10

Fabrication of a fiber-type hepatic tissue by bottom-up method using multilayer spheroids Reviewed International journal

Tatsuya Okudaira, Ryohei Yabuta, Hiroshi Mizumoto, Toshihisa Kajiwara

Journal of Bioscience and Bioengineering   123 ( 6 )   739 - 747   2017.6

Fabrication of a fiber-type hepatic tissue by bottom-up method using multilayer spheroids Reviewed

Tatsuya Okudaira, Ryohei Yabuta, Hiroshi Mizumoto, Toshihisa Kajiwara

Journal of Bioscience and Bioengineering   123 ( 6 )   739 - 747   2017.6

高分子材料の溶融混練シミュレーションと混練性能評価 Reviewed

梶原 稔尚

日本ゴム協会誌   89 ( 12 )   355 - 361   2016.12

Impacts of mixing elements on mixing characteristics in twin-screw extrusion International journal

Hiroki Takemitsu, Yasuya Nakayama, Toshihisa Kajiwara, Koichi Kimura, Takahide Takeuchi, Hideki Tomiyama

Proceedings of the 29th International Symposium on Chemical Engineering 2016 (29th ISChE 2016)   2016.12

Mixing characteristics of different kneading elements: An experimental study International journal

Satoshi Esaki, Kenta Nakao, Yasuya Nakayama, Toshihisa Kajiwara, Koichi Kimura, Takahide Takeuchi, Hideki Tomiyama

Proceedings of the 29th International Symposium on Chemical Engineering 2016 (29th ISChE 2016)   2016.12

Effects of pitched tips of novel kneading disks on melt mixing in twin-screw extrusion Reviewed International journal

Yasuya Nakayama, Nariyoshi Nishihira, Toshihisa Kajiwara, Hideki Tomiyama, Takahide Takeuchi, Koichi Kimura

Nihon Reoroji Gakkaishi(Journal of the Society of Rheology, Japan)   44 ( 5 )   281 - 288   2016.12

Prediction of Mixing Performance for Glass Fiber Dispersion in a Twin-Screw Extruder Using Numerical Simulation International journal

Toshihisa Kajiwara, Kunihiro Hirata, Hiroshi Ishida, Motohiro Hiragori, Yasuya Nakayama

International Workshop on Process Intensification 2016 (IWPI 2016)   2016.9

Evaluation of Melt-Mixing Performance in a Twin-Screw Extruder - Experimental Verification - International journal

Toshihisa Kajiwara, Yasuya Nakayama, Hiroki Takemitsu, Satoshi Esaki, Takahide Takeuchi, Koichi Kimura, Hideki Tomiyama

Proceedings of the XVIIth International Congress on Rheology (ICR2016)   2016.8

Formation of three-dimensional hepatic tissue by the bottom-up method using spheroids Reviewed

Tatsuya Okudaira, Naoki Amimoto, Hiroshi Mizumoto, Toshihisa Kajiwara

Journal of Bioscience and Bioengineering   122 ( 2 )   213 - 218   2016.8

Strain Mode of General Flow: Characterization and Implications for Flow Pattern Structures International journal

Yasuya Nakayama, Tatsunori Masaki, Toshihisa Kajiwara

Proceedings of the XVIIth International Congress on Rheology (ICR2016)   2016.8

Melt-Mixing by Pitched-Tip Kneading Disks in a Twin-Screw Extruder - Experimental Verification - International journal

Toshihisa Kajiwara, Yasuya Nakayama, Hiroki Takemitsu, Satoshi Esaki, Takahide Takeuchi, Koichi Kimura, Hideki Tomiyama

Proceedings of the Polymer Processing Society 32nd Annual Meeting (PPS-32)   2016.7

Strain mode of general flow Characterization and implications for flow pattern structures Reviewed

Yasuya Nakayama, Toshihisa Kajiwara, Tatsunori Masaki

AIChE Journal   62 ( 7 )   2563 - 2569   2016.7

Strain Mode of General Flow: Characterization and Implications for Flow Pattern Structures Reviewed International journal

Yasuya Nakayama, Tatsunori Masaki, Toshihisa Kajiwara

AIChE J.   62 ( 7 )   2563 - 2569   2016.6

Formation of three-dimensional hepatic tissue by the bottom-up method using spheroids Invited Reviewed International journal

Tatsuya Okudaira, Naoki Amimoto, Hiroshi Mizumoto, Toshihisa Kajiwara

Journal of Bioscience and Bioengineering   2016.1

Effects of pitched tips of novel kneading disks on melt mixing in twin-screw extrusion Reviewed

Yasuya Nakayama, Nariyoshi Nishihira, Toshihisa Kajiwara, Hideki Tomiyama, Takahide Takeuchi, Koichi Kimura

Nihon Reoroji Gakkaishi   44 ( 5 )   281 - 288   2016.1

Melt-mixing by pitched-tip kneading disks in a twin-screw extruder International journal

Toshihisa Kajiwara, Yasuya Nakayama, Hiroki Takemitsu, Satoshi Esaki, Takahide Takeuchi, Koichi Kimura, Hideki Tomiyama

Proceedings of Asian Workshop on Polymer Processing 2015 (AWPP2015)   2015.12

力学的視点からのフィラー分散に関する基礎的理解 Reviewed

正木辰典, 名嘉山 祥也, 梶原 稔尚

27 ( 12 )   533 - 539   2015.12

Prediction of fiber dispersion for glass fiber reinforced plastics in a twin-screw extruder using flow simulation International journal

Kunihiro Hirata, Hiroshi Ishida, Motohiro Hiragori, Yasuya Nakayama, Toshihisa Kajiwara

2015.9

Numerical study on mixing performance of glass fiber dispersion in a twin-screw extruder with backward-mixing elements

Kunihiro Hirata, Hiroshi Ishida, Motohito Hiragoori, Yasuya Nakayama, Toshihisa Kajiwara

AIP Conf. Proc.   1664   20009   2015.6

Strain mode of general flow: characterization and implication to mixing International journal

Yasuya Nakayama, Tatsunori Masaki, Toshihisa Kajiwara

Proceedings of the Polymer Processing Society 31st Annual Meeting (PPS-31)   2015.6

Numerical study on mixing performance of glass fiber dispersion in a twin-screw extruder with backward-mixing elements

Kunihiro Hirata, Hiroshi Ishida, Motohiro Hiragori, Yasuya Nakayama, Toshihisa Kajiwara

30th International Conference of the Polymer Processing Society, PPS 2014 Proceedings of PPS-30 The 30th International Conference of the Polymer Processing Society - Conference Papers   2015.5

A study on composite technology in processing of polymers and glasses Reviewed

Toshihisa Kajiwara

Nihon Reoroji Gakkaishi   43 ( 5 )   119 - 124   2015.1

Prediction of Glass Fiber Dispersion in a Twin-Screw Extruder Using a Three-Dimensional Flow Simulation International journal

Kunihiro Hirata, Hiroshi Ishida, Motohito Hiragohri, Yasuya Nakayama, Toshihisa Kajiwara

Proceedings of Asian Workshop on Polymer Processing 2014 (AWPP2014)   2014.11

Effectiveness of a backward mixing screw element for glass fiber dispersion in a twin-screw extruder

Kunihiro Hirata, Hiroshi Ishida,Motohito Hiragohri, Yasuya Nakayama and Toshihisa Kajiwara

Polymer Engineering & Science   54 ( 9 )   2005 - 2012   2014.9

Numerical study on mixing performance of glass fiber dispersion in a twin-screw extruder with backward-mixing elements International journal

Kunihiro Hirata, Hiroshi Ishida, Motohito Hiragohri, Yasuya Nakayama, Toshihisa Kajiwara

Proceedings of the Polymer Processing Society 30th Annual Meeting (PPS-30)   2014.6

カップの圧縮成形解析と厚み分布をもつ幅広な円盤状シートによる成形荷重の低減

鷲崎 俊朗, 梶原 稔尚, 名嘉山 祥也

高分子論文集   71 ( 3 )   89 - 97   2014.3

Numerical analysis of compression molding for cups and reduction of forming load by using circular sheets having a thickness distribution Reviewed

Toshiro Washizakj, Toshihisa Kajiwara, Yasuya Nakayama

KOBUNSHI RONBUNSHU   71 ( 3 )   89 - 97   2014.3

Erratum Numerical analysis of compression molding for cups and reduction of forming load by using circular sheets having a thickness distribution (Kobunshi Ronbunshu (2014) 71 (89-97)) Reviewed

Toshiro Washizaki, Toshihisa Kajiwara, Yasuya Nakayama

KOBUNSHI RONBUNSHU   71 ( 5 )   2014.1

Hepatic differentiation of ES cells and its quantitative analysis in HF/organoid culture

Toshihisa Kajiwara, Kazumori Funatsu, Hiroyuki Ijima, Kohji Nakazawa, Hiroshi Mizumoto, Naoki Amimoto, Kaoru Morimura

Proceedings of The 26th International Symposium on Chemical Engineering   2013.12

Formation of a three-dimensional hepatic tissue by stacking endothelial cellcovered hepatocyte spheroids

Toshihisa Kajiwara, Hiroshi Mizumoto, Naoki Amimoto, Tatsuya Okudaira

Proceedings of The 26th International Symposium on Chemical Engineering   2013.12

Hematopoietic differentiation of ES cells inside hollow fibers

Toshihisa Kajiwara, Hiroshi Mizumoto, Naoki Amimoto, Yuka Shidahara, Ken Yamada, Shinya Iwanaga

Proceedings of The 26th International Symposium on Chemical Engineering   2013.12

The functional evaluation of a hollow fiber type bioartificial liver module immobilizing ES cell-derived hepatic cells

Toshihisa Kajiwara, Kazumori Funatsu, Hiroyuki Ijima, Koji Nakazawa, Hiroshi Mizumoto, Naoki Amimoto

Proceedings of the 2013 Joint of Japan/Taiwan/Korea Chemical Engineering Conference   2013.11

Generation of hematopoietic cells from embryonic stem cells inside hollow fibers

Toshihisa Kajiwara, Hiroshi Mizumoto, Yuka Shidahara, Ken Yamada, Shinya Iwanaga

Proceedings of the 2013 Joint of Japan/Taiwan/Korea Chemical Engineering Conference   2013.11

Fabrication of a functional hepatic tissue by stacking endothelial cellcovered hepatocyte spheroids

Toshihisa Kajiwara, Hiroshi Mizumoto, Naoki Amimoto, Tatsuya Okudaira

Proceedings of the 2013 Joint of Japan/Taiwan/Korea Chemical Engineering Conference   2013.11

Quantitative analysis of hepatic cells derived from ES cells in HF/organoid culture

Toshihisa Kajiwara, Kazumori Funatsu, Hiroyuki Ijima, Kohji Nakazawa, Hiroshi Mizumoto, Naoki Amimoto, Kaoru Morimura

Proceedings of the 2013 Joint of Japan/Taiwan/Korea Chemical Engineering Conference   2013.11

Quantitative analysis of hepatic cells derived from ES cells in HF/organoid culture

Toshihisa Kajiwara, Kazumori Funatsu, Hiroyuki Ijima, Kohji Nakazawa, Hiroshi Mizumoto, Naoki Amimoto, Kaoru Morimura

Proceedings of the 2013 Joint of Japan/Taiwan/Korea Chemical Engineering Conference   2013.11

Efectiveness of a backward mixing screw element for glass fiber dispersion in a twin-screw extruder International journal

Toshihisa Kajiwara, Yasuya Nakayama, Motohiro Hiragohri, Hiroshi Ishida, Kunihiro Hirata

Polymer Engineering & Science   2013.9

Experimental Assessment of Dispersion Failure of Glass Fiber Reinforced Plastics in a Twin Screw Extruder International journal

K. Hirata, H. Ishida, M. Hiragohri, Y. Nakayama, and T. Kajiwara

International Polymer Processing   28 ( 4 )   368 - 375   2013.8

Experimental assessment of dispersion failure of glass fiber reinforced plastics in a twin screw extruder Reviewed

Kunihiro Hirata, H. Ishida, M. Hiragohri, Y. Nakayama, T. Kajiwara

International Polymer Processing   28 ( 4 )   368 - 375   2013.8

Quantifying hierarchical mizture quality in polymer composite materials: structure and inhomogeneity in multiple scales International journal

Toshihisa Kajiwara, Yasuya Nakayama

Vol54   1227 - 1233   2013.2

Quantifying hierarchical mixture quality in polymer composite materials Structure and inhomogeneity in multiple scales Reviewed

Yasuya Nakayama, Toshihisa Kajiwara

polymer   54 ( 3 )   1227 - 1233   2013.2

人工肝臓

梶原 稔尚, 水本 博, 船津和守

日本人工臓器学会   291 - 307   2012.12

Dynamic shear responses of polymer-polymer interfaces Reviewed

Yasuya Nakayama, Kiyoyasu Kataoka, Toshihisa Kajiwara

Nihon Reoroji Gakkaishi   40 ( 5 )   245 - 252   2012.12

Dynamic shear responses of polymer-polymer interfaces

Yasuya Nakayama, Kiyoyasu Kataoka, and Toshihisa Kajiwara

Nihon Reoroji Gakkaishi (Journal of the Society of Rheology, Japan)   2012.7

Fabrication of Au Nanoparticles Doped Bulk Silica Glass by Use of SiO2-PVA Nanocomposite Reviewed

Hiroshi IKEDA, Shigeru FUJINO, Toshihisa KAJIWARA

Journal of the Ceramic Society of Japan   2012.6

中空糸を用いた胚性幹細胞の肝分化誘導プロセス開発とバイオ人工肝臓への応用

水本博、梶原稔尚

膜   2012.5

Evaluation of a hybrid artificial liver module based on a spheroid culture system of embryonic stem cell-derived hepatic cells Reviewed

Hiroshi Mizumoto, Shunsuke Hayashi, Kinya Matsumoto, Kaoru Ikeda, Tomoaki Kusumi, Masakazu Inamori, Kohji Nakazawa, Hiroyuki Ijima, Kazumori Funatsu, Toshihisa Kajiwara

Cell Transplantation   21 ( 2-3 )   421 - 428   2012.4

Evaluation of a Hybrid Artificial Liver Module Based on a Spheroid Culture System of Embryonic Stem Cell-Derived Hepatic Cells International journal

Hiroshi MIZUMOTO, Shunsuke HAYASHI, Kinya MATSUMOTO, Kaoru IKEDA, Tomoaki KUSUMI, Masakazu INAMORI, Kohji NAKAZAWA, Hiroyuki IJIMA, Kazumori FUNATSU, Toshihisa KAJIWARA

Cell Transplantation   2012.2

Fabrication of Au nanoparticles doped bulk silica glass by use of SiO ₂-PVA nanocomposite Reviewed

Hiroshi Ikeda, Shigeru Fujino, Toshihisa Kajiwara

Journal of the Ceramic Society of Japan   120 ( 1402 )   238 - 242   2012

Capturing the Efficiency of a Melt-Mixing Process for Polymer Processing

Toshihisa KAJIWARA and Yasuya NAKAYAMA

Journal of Chemical Engineering of Japan   2011.11

Capturing the efficiency of a melt-mixing process for polymer processing Reviewed

Toshihisa Kajiwara, Yasuya Nakayama

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   44 ( 11 )   831 - 839   2011.11

An evaluation of the utility of the hepatic differentiation method using hollow fiber/organoid culture for the development of a hybrid artificial liver device

Naoki Amimoto, Hiroshi Mizumoto, Kohji Nakazawa, Hiroyuki Ijima, Kazumori Funatsu, Toshihisa Kajiwara

Biochemical Engineering Journal   2011.9

An evaluation of the utility of the hepatic differentiation method using hollow fiber/organoid culture for the development of a hybrid artificial liver device Reviewed

Naoki Amimoto, Hiroshi Mizumoto, Kohji Nakazawa, Hiroyuki Ijima, Kazumori Funatsu, Toshihisa Kajiwara

Biochemical Engineering Journal   56 ( 1-2 )   69 - 74   2011.9

Fabrication of micropatterns on silica glass by a room-temperature imprinting method Reviewed

Hiroshi Ikeda, Shigeru Fujino, Toshihisa Kajiwara

Journal of the American Ceramic Society   94 ( 8 )   2319 - 2322   2011.8

Hepatic differentiation of mouse embryonic stem cells and induced pluripotent stem cells during organoid formation in hollow fibers Reviewed

Naoki Amimoto, Hiroshi Mizumoto, Kohji Nakazawa, Hiroyuki Ijima, Kazumori Funatsu, Toshihisa Kajiwara

Tissue Engineering - Part A   17 ( 15-16 )   2071 - 2078   2011.8

Hepatic Differentiation of Mouse Embryonic Stem Cells and Induced Pluripotent Stem Cells During Organoid Formation in Hollow Fibers

Naoki Amimoto, Hiroshi Mizumoto, Kohji Nakazawa, Hiroyuki Ijima, Kazumori Funatsu, Toshihisa Kajiwara

Tissue Engineering Part A   2011.5

Non-contact measurement of the viscosity of a B2O3 melt using electric field tweezers

S.Fujino, S.Inaba, T.Kajiwara and K.Sakai

Journal of the Society of Rheology   2011.2

Fabrication of micropatterns on silica glass by a room-temperature imprinting method International journal

H.Ikeda, S.Fujino and T.Kajiwara

Journal of American Ceramic Society   2011.2

Melt-mixing by novel pitched-tip kneading disks in a co-rotating twin-screw extruder Reviewed International journal

Yasuya Nakayama, Eiji Takeda, Takashi Shigeishi, Hideki Tomiyama, Toshihisa Kajiwara

Chemical Engineering Science   2011.1

Preparation of SiO₂-PVA nanocomposite and monolithic transparent silica glass by sintering Reviewed

Hiroshi Ikeda, Shigeru Fujino, Toshihisa Kajiwara

Journal of the Ceramic Society of Japan   119 ( 1385 )   65 - 69   2011.1

Melt-mixing by novel pitched-tip kneading disks in a co-rotating twin-screw extruder Reviewed

Yasuya Nakayama, Eiji Takeda, Takashi Shigeishi, Hideki Tomiyama, Toshihisa Kajiwara

Chemical Engineering Science   66 ( 1 )   103 - 110   2011.1

Preparation of SiO2–PVA Nanocomposite and Monolithic Transparent　Silica Glass by Sintering

2011.1

Noncontact measurement of viscosity of B₂O₃ melt using electric-field tweezers Reviewed

Shigeru Fujino, Seiji Inaba, Toshihisa Kajiwara, Keiji Sakai

Nihon Reoroji Gakkaishi   39 ( 1-2 )   49 - 54   2011

In vitro reconstruction of a three-dimensional mouse hematopoietic microenvironment in the pore of polyurethane foam Reviewed International journal

T. JOZAKI, K. AOKI, H. MIZUMOTO, T. KAJIWARA

Cytotechnology   2010.12

In vitro reconstruction of a three-dimensional mouse hematopoietic microenvironment in the pore of polyurethane foam Reviewed

Tadasu Jozaki, Kentaro Aoki, Hiroshi Mizumoto, Toshihisa Kajiwara

Cytotechnology   62 ( 6 )   531 - 537   2010.12

Afterglow luminance property of phosphorescent phosphor SrAl2O4:Eu2+,Dy3+-glass composites Reviewed International journal

Hideki YOSHIDA,Shigeru FUJINO,Toshihisa KAJIWARA

Journal of the Ceramic Society of Japan   2010.9

Antimicrobial effect of porcelain glaze with silver-cray antimicrobial agent Reviewed International journal

Hideki YOSHIDA,Hisao ABE,Toshitsugu TAGURI,Fumihiko OHASHI,Shigeru FUJINO,Toshihisa KAJIWARA

Journal of the Ceramic Society of Japan   2010.7

Investigation of medium perfusion through scaffold-free tissue constructs using endothelial cell-covered spheroids in vitro Reviewed

Masakazu Inamori, Hiroshi Mizumoto, Toshihisa Kajiwara

Biochemical Engineering Journal   50 ( 3 )   116 - 121   2010.7

Antimicrobial effect of porcelain glaze with silver-clay antimicrobial agent Reviewed

Hideki Yoshida, Hisao Abe, Toshitsugu Taguri, Fumihiko Ohashi, Shigeru Fujino, Toshihisa Kajiwara

Journal of the Ceramic Society of Japan   118 ( 1379 )   571 - 574   2010.7

Continuous Cell Production from Three Dimensional Hematopoietic Microenvironment in Polyurethane Foam International journal

T. JOZAKI, K. AOKI, H. MIZUMOTO, T. KAJIWARA

Animal Cell Technology: Basic & Applied Aspects,Proceedings of the 21st Annual and International Meeting of the Japanese Association for Animal Cell Technology   2010.6

Integration of Endothelial Cell-Covered Hepatocytes Spheroids for Construction of Vascularized Liver Tissue

M. INAMORI, H. MIZUMOTO, T. KAJIWARA

Animal Cell Technology: Basic & Applied Aspects,Proceedings of the 21st Annual and International Meeting of the Japanese Association for Animal Cell Technology   2010.5

Investigation of medium perfusion through scaffold-free tissue constructs using endothelial cell-covered spheroids in vitro Reviewed International journal

M. INAMORI, H. MIZUMOTO, T. KAJIWARA

Biochemical Engineering Journal   2010.5

The effect of viscoelasticity on the extrusion drawing in film-casting process Reviewed

Seiji Shiromoto, Yasushi Masutani, Masaaki Tsutsubuchi, Yoshiaki Togawa, Toshihisa Kajiwara

Rheologica Acta   49 ( 7 )   757 - 767   2010.4

Afterglow luminance property of phosphorescent phosphor　 SrAl2O4:Eu2+,Dy3+- Glass Composites

2010.2

Antimicrobial effect of porcelain glaze with silver-clay antimicrobial agent

H.Yoshida, H.Abe, T. Taguri, F.Ohashi,S.Fujino and T. Kajiwara

Journal of Ceramic Society of Japan   2010.2

Empirical Equation for Calculating the Density of Oxide Glasses

Seiji INABA and Shigeru FUJINO

Journal of American Ceramic Society   2010.1

Afterglow luminance property of phosphorescent phosphor SrAl ₂ O ₄ :Eu ²⁺ , Dy ³⁺ -glass composites Reviewed

Hideki Yoshida, Shigeru Fujino, Toshihisa Kajiwara

Journal of the Ceramic Society of Japan   118 ( 1381 )   784 - 787   2010.1

A neck-in model in extrusion lamination process Reviewed

Seiji Shiromoto, Yasushi Masutani, Masaaki Tsutsubuchi, Yoshiaki Togawa, Toshihisa Kajiwara

Polymer Engineering and Science   50 ( 1 )   22 - 31   2010.1

A Neck-in Model in Extrusion Lamination Process Reviewed International journal

S. Shiromoto, Y. Masutani, M. Tsutsubuchi, Y. Togawa, T. Kajiwara

Polymer Engineering and Science   2010.1

Hepatocyte growth factor and epidermal growth factor promote spheroid formation in polyurethane foam/hepatocyte culture and improve expression and maintenance of albumin production Reviewed

Hiroyuki Ijima, Hiroshi Mizumoto, Kohji Nakazawa, Toshihisa Kajiwara, Taku Matsushita, Kazumori Funatsu

Biochemical Engineering Journal   47 ( 1-3 )   19 - 26   2009.12

Preparation and characterization of BaO-TeO₂ thin films obtained from tellurium(VI) alkoxide by a sol-gel method Reviewed

Hiroshi Ikeda, Shigeru Fujino, Toshihisa Kajiwara

Journal of the American Ceramic Society   92 ( 11 )   2619 - 2622   2009.11

A special issue for computational rheology Reviewed

Jun ichi Takimoto, Toshihisa Kajiwara

Nihon Reoroji Gakkaishi   37 ( 2 )   2009.9

Three-dimensional viscoelastic analysis of multi-layer polymer flow by numerical simulation Reviewed

Takeshi Inomoto, Toshihisa Kajiwara

Nihon Reoroji Gakkaishi   37 ( 2 )   91 - 96   2009.9

An Approach for Formation of Vascularized Liver Tissue by Endothelial Cell–Covered Hepatocyte Spheroid Integration Reviewed International journal

2009.8

An approach for formation of vascularized liver tissue by endothelial cell-covered hepatocyte spheroid integration Reviewed

Masakazu Inamori, Hiroshi Mizumoto, Toshihisa Kajiwara

Tissue Engineering - Part A   15 ( 8 )   2029 - 2037   2009.8

Three-dimensional Viscoelastic Analysis of Multi-Layer Polymer Flow by Numerical Simulation Reviewed International journal

T. Inomoto,T. Kajiwara

Nihon Reoroji Gakkaishi   2009.6

Evaluation of A Bioreactor with Stacked Sheet Shaped Organoids of Primary Hepatocytes Reviewed International journal

T. Kusumi, K. Ishihara, H. Mizumoto, K. Nakazawa, H. Ijima, K. Funatsu, T. Kajiwara

Journal of Bioscience and Bioengineering   2009.5

Viscoelastic analysis of multilayer polymer melt flow in die Reviewed

Yuji Matsuo, Yasuya Nakayama, Toshihisa Kajiwara

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B   75 ( 753 )   929 - 936   2009.5

Evaluation of a bioreactor with stacked sheet shaped organoids of primary hepatocytes Reviewed

Tomoaki Kusumi, Kazuhisa Ishihara, Hiroshi Mizumoto, Kohji Nakazawa, Hiroyuki Ijima, Kazumori Funatsu, Toshihisa Kajiwara

Journal of Bioscience and Bioengineering   107 ( 5 )   552 - 555   2009.5

高分子溶融体のダイ内多層流動の粘弾性解析

松尾雄二，名嘉山祥也，梶原稔尚

日本機械学会論文集(B編)   2009.5

A New Culture Technique for Hepatocyte Organoid Formation and Long-Term Maintenance of Liver Specific Functions Reviewed International journal

H. Mizumoto, K. Ishihara, K. Nakazawa, H. Ijima, K. Funatsu, T. Kajiwara

Tissue Engineering Part C: Methods   2008.6

Reconstruction of Cartilage Tissue Using Scaffold-Free Organoid Culture Technique Reviewed International journal

Y. Irie, H. Mizumoto, S. Fujino, T. Kajiwara

Journal of Bioscience and Bioengineering   2008.5

Reconstruction of cartilage tissue using scaffold-free organoid culture technique Reviewed

Yutaka Irie, Hiroshi Mizumoto, Shigeru Fujino, Toshihisa Kajiwara

Journal of Bioscience and Bioengineering   105 ( 5 )   450 - 453   2008.5

Hepatic Differentiation of Mouse Embryonic Stem Cells in a Three-Dimensional Culture System Using Polyurethane Foam Reviewed International journal

K. Matsumoto, H. Mizumoto, K. Nakazawa, H. Ijima, K. Funatsu, T. Kajiwara

Journal of Bioscience and Bioengineering   2008.4

Hepatic differentiation of mouse embryonic stem cells in a three-dimensional culture system using polyurethane foam Reviewed

Kinya Matsumoto, Hiroshi Mizumoto, Kohji Nakazawa, Hiroyuki Ijima, Kazumori Funatsu, Toshihisa Kajiwara

Journal of Bioscience and Bioengineering   105 ( 4 )   350 - 354   2008.4

Development of Articular Cartilage Grafts Using Organoid Formation Techniques Reviewed International journal

Y. Irie, H. Mizumoto, S. Fujino, T. Kajiwara

Transplantation Proceedings   2008.3

Hepatic Differentiation of Embryonic Stem Cells in HF/Organoid Culture Reviewed

Hiroshi Mizumoto, K. Aoki, K. Nakazawa, Hiroyuki Ijima, K. Funatsu, Toshihisa Kajiwara

Transplantation Proceedings   40 ( 2 )   611 - 613   2008.3

Hepatic Differentiation of Mouse Embryonic Stem Cells in a Bioreactor Using Polyurethane/Spheroid Culture Reviewed

K. Matsumoto, Hiroshi Mizumoto, K. Nakazawa, Hiroyuki Ijima, K. Funatsu, Toshihisa Kajiwara

Transplantation Proceedings   40 ( 2 )   614 - 616   2008.3

Fabrication of sintered silica glass and its vacuum ultraviolet transparency Reviewed

Shigeru Fujino, Koutaro Kunikawa, Toshihisa Kajiwara

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   55 ( 3 )   216 - 220   2008.3

Development of Articular Cartilage Grafts Using Organoid Formation Techniques Reviewed

Y. Irie, H. Mizumoto, S. Fujino, T. Kajiwara

Transplantation Proceedings   40 ( 2 )   631 - 633   2008.3

粉末焼結法による高純度透明シリカガラスの作製と真空紫外透過特性 Reviewed

藤野茂，國川晃太郎，梶原稔尚

粉体および粉末治金   2008.3

Hepatic Differentiation of Embryonic Stem Cells in HF/Organoid Culture Reviewed International journal

H. Mizumoto, K. Aoki, K. Nakazawa, H. Ijima, K. Funatsu, T. Kajiwara

Transplantation Proceedings   2008.3

Hepatic Differentiation of Mouse Embryonic Stem Cells in a Bioreactor Using Polyurethane/Spheroid Culture Reviewed International journal

K. Matsumoto, H. Mizumoto, K. Nakazaawa, H. Ijima, K. Funatsu, T. Kajiwara

Transplantation Proceedings   2008.3

Evaluation of a hybrid artificial liver module with liver lobule-like structure in rats with liver failure Reviewed International journal

K. Aoki, H. Mizumoto, K. Nakazawa, K. Funatsu, T. Kajiwara

The International Journal of Artificial Organs   2008.2

A new culture technique for hepatocyte organoid formation and long-term maintenance of liver-specific functions Reviewed

Hiroshi Mizumoto, Kazuhisa Ishihara, Kohji Nakazawa, Hiroyuki Ijima, Kazumori Funatsu, Toshihisa Kajiwara

Tissue Engineering - Part C: Methods   14 ( 2 )   167 - 175   2008.1

Evaluation of a hybrid artificial liver module with liver lobule-like structure in rats with liver failure Reviewed

K. Aoki, Hiroshi Mizumoto, K. Nakazawa, K. Funatsu, Toshihisa Kajiwara

International Journal of Artificial Organs   31 ( 1 )   55 - 61   2008.1

Stress induced mixing in rotor elements of a counter-rotating pi continuous mixier

T. Ishikawa, F. Nagano, Toshihisa Kajiwara

Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007 Society of Plastics Engineers Annual Technical Conference Plastics Encounter at ANTEC 2007, Conference Proceedings   485 - 489   2007.9

Simulation Study on Mixing Process in Twin-Screw Extruders International journal

Y. Nakayama, M. Tanidono, H. Tomiyama, T. Kajiwara

Proceedings of 23rd Annual Meeting of the Polymer Processing Society   2007.6

Development of A Hybrid Artificial Liver Module With Hepatocyte Organoids Induced by Centrifugal Force International journal

K. Aoki, K. Noda, H. Mizumoto, K. Nakazawa, K. Funatsu, T. Kajiwara

Proceedings of 2006 Japan/Taiwan/Korea Chemical Engineering Congerence   2006.11

Finite Element Analysis of Melt Mixing Zone in Twin Screw Extruders with Special Geometries Reviewed

T. Kajiwara, H. Tomiyama, A. Uotani, S. Inoue, K. Funatsu

Seikei-Kakou,   2006.11

Simulation for Mixing Process in the Solid Conveying Zone of a Twin-screw Extruder Reviewed

E. Inoue, T. Tsuji, T. Kajiwara, K. Funatsu, Y. Nakayama

Seikei-Kakou,   2006.11

Tip-clearance Effect on Mixing Performance of Twin Screw Extruders Reviewed International journal

T. Ishikawa, F. Nagano, T. Kajiwara, K. Funatsu

International Polymer Processing   2006.9

Stress Induced Mixing of Rotor Elements in Counter-Rotating Continuous Mixers International journal

T. Ishikawa, F. Nagano, T. Kajiwara

Proceedings of 22nd Annual Meeting of the Polymer Processing Society   2006.7

Relationship between neck-in phenomena and rheological properties in film casting Reviewed

Toshihisa Kajiwara, Masato Yamamura, Tomoko Asahina

Nihon Reoroji Gakkaishi   34 ( 2 )   97 - 103   2006.7

Differentiation Effects by the Combination of Spheroid Formation and Sodium Butyrate Treatment in Human Hepatoblastoma Cell Line (Hep G2): A Possible Cell Source for Hybrid Artificial Liver Reviewed International journal

J. Fukuda, K. Okamura, K. Ishihara, H. Mizumoto, K. Nakazawa, H. Ijima, T. Kajiwara, K. Funatsu

Cell Transplantation   2006.3

Formation of a sheet-shaped organoid using rat primary hepatocytes for long-term maintenance of liver-specific functions Reviewed

K. Ishihara, H. Mizumoto, K. Nakazawa, Toshihisa Kajiwara, K. Funatsu

International Journal of Artificial Organs   29 ( 3 )   318 - 328   2006.3

Formation of a sheet-shaped organoid using rat primary hepatocytes for long-term maintenance of liver-specific functions Reviewed International journal

K. Ishihara, H. Mizumoto, K. Nakazawa, T. Kajiwara, K. Funatsu

The International Journal of Artificial Organs   2006.3

Relationship between Neck-in Phenomena and Rheological Properties in Film Casting Reviewed International journal

T. Kajiwara, M. Yamamura, T. Asahina

Nihon Reoroji gakkaishi   2006.2

Tip-clearance effect on mixing performance of twin screw extruders Reviewed

T. Ishikawa, F. Nagano, Toshihisa Kajiwara, K. Funatsu

International Polymer Processing   21 ( 4 )   354 - 360   2006.1

Differentiation effects by the combination of spheroid formation and sodium butyrate treatment in human hepatoblastoma cell line (Hep G2) A possible cell source for hybrid artificial liver Reviewed

J. Fukuda, K. Okamura, K. Ishihara, H. Mizumoto, K. Nakazawa, H. Ijima, T. Kajiwara, Kanimori Funatsu

Cell Transplantation   14 ( 10 )   819 - 827   2005.12

Finite Element Analysis of Melt Mixing Zone in Twin Screw Extruders with Special Geometries International journal

T. Kajiwara, A. Uotani, H. Tomiyama, K. Funatsu

Proceedings of Asian Workshop on Polymer Processing 2005   2005.10

Development of Prediction Technique of Materials Behavior in Twin Screw Extruders Using the Particles Simulation Method International journal

S. Kagemoto, T. Kajiwara, K. Funatsu

Proceedings of Asian Workshop on Polymer Processing 2005   2005.10

Finite Element Analysis of Melt Mixing Zone in Twin Screw Extruders with Special Geometries International journal

T. Kajiwara, A. Uotani, H. Tomiyama, K. Funatsu

Proceedings of 21th Annual Meeting of the Polymer Processing Society   2005.6

Tip-clearance Effect on Mixing Performance of Twin Screw Extruders International journal

T. Ishikawa, F. Nagano, T. Kajiwara, K. Funatsu

Proceedings of 21th Annual Meeting of the Polymer Processing Society   2005.6

Hepatocyte organoid culture in elliptic hollow fibers to develop a hybrid artificial liver Reviewed International journal

J. Fukuda, H. Mizumoto, K. Nakazawa, T. Kajiwara, K. Funatsu

The International Journal of Artificial Organs   27 ( 12 )   1091 - 1099   2004.12

Hepatocyte organoid culture in elliptic hollow fibers to develop a hybrid artificial liver Reviewed

J. Fukuda, H. Mizumoto, K. Nakazawa, T. Kajiwara, Kazumori Funatsu

International Journal of Artificial Organs   27 ( 12 )   1091 - 1099   2004.12

Development of a hybrid artificial liver module having liver lobule-like strucuture Reviewed

H. Mizumoto, T. Yamaguchi, K. Aoki, K. Nakazawa, T. Kajiwara, K. Funatsu

The 10th Asian Pacific Confederation of Chemical Engineering Congress   2004.10

Hybrid artificial liver with polyurethane foam / shperoid culture for treatment of acute liver failure Reviewed

T. Kajiwara, K. Nakazawa, J. Fukuda, R. Sakiyama, H. Ijima, Y. Yamashita, M. Shimada, K. Shirabe, E. Tsujita, K. Funatsu

The 10th Asian Pacific Confederation of Chemical Engineering Congress   2004.10

Organoid-sheet formation for hepatocyte and myocardial cell culture Reviewed

K. Ishihara, J. Fukuda, H. Mizumoto, K. Nakazawa, T. Kajiwara, K. Funatsu

The 10th Asian Pacific Confederation of Chemical Engineering Congress   2004.10

Multicomponent diffusion in phase-separating polymer blends with different frictional interactions: a mean-friction model Reviewed International journal

M. Yamamura, T. Kajiwara, H. Kage

Chemical Engineering Science   2003.9

Multicomponent diffusion in phase-separating polymer blends with different frictional interactions A mean-friction model Reviewed

Masato Yamamura, Toshihisa Kajiwara, Hiroyuki Kage

Chemical Engineering Science   58 ( 17 )   3891 - 3899   2003.9

Computational Modelling and Simulation of Materials Behavior in a Twin Screw Extruder using Particle Simulation Method International journal

K. Funatsu, T. Tsuji, A. Uotani, T. Kajiwara

Proceedings of Europe-Africa regional Meeting of the Polymer Processing Society   2003.9

3-D Melt Flow Simulation in a Twin Screw Extruder with Grooved Barrel International journal

T. Kajiwara, Y. Terao, A. Uotani, T. Tsuji, H. Tomiyama, K. Funatsu

Proceedings of Europe-Africa regional Meeting of the Polymer Processing Society   2003.9

Flow-induce stripe pattern formation in phrase-separating fluids Reviewed International journal

M. Yamamura, S. Nakamura, T. Kajiwara, H. Kage, K. Adachi

Polymer   2003.7

Flow-induced stripe pattern formation in phase-separating fluids Reviewed

Masato Yamamura, Shoko Nakamura, Toshihisa Kajiwara, Hiroyuki Kage, Kitaro Adachi

polymer   44 ( 16 )   4699 - 4704   2003.7

Development of Prediction Technique of Materials Behavior in Twin Screw Extruders Using the Particle Simulation Method International journal

T. Kajiwara, A. Uotani, T. Tsuji, K. Funatsu

Proceedings of 19th Annual Meeting of the Polymer Processing Society   2003.7

Stripe pattern breakup in evaporating liquid layer on a plane with horizontal temperature gradient Reviewed International journal

M. Yamamura, K. Nagai, T. Kajiwara, K. Adachi

Chemical Engineering and Processing,   2003.5

Stripe pattern breakup in evaporating liquid layer on a plane with horizontal temperature gradient Reviewed

Masato Yamamura, Koharu Nagai, Toshihisa Kajiwara, Kitaro Adachi

Chemical Engineering and Processing: Process Intensification   42 ( 5 )   395 - 402   2003.5

Recovery of rats with fulminant hepatic failure by using a hybrid artificial liver support system with polyurethane foam/rat hepatocyte spheroids Reviewed International journal

R. Sakiyama, K. Nakazawa, H. Ijima, H. Mizumoto, T. Kajiwara, M. Ito, H. Ishibashi, K. Funatsu

The International Journal of Artificial Organs   25 ( 12 )   1144 - 1152   2002.12

Recovery of rats with fulminant hepatic failure by using a hybrid artificial liver support system with polyurethane foam/rat hepatocyte spheroids Reviewed

R. Sakiyama, K. Nakazawa, H. Ijima, H. Mizumoto, T. Kajiwara, M. Ito, H. Ishibashi, Kazumori Funatsu

International Journal of Artificial Organs   25 ( 12 )   1144 - 1152   2002.12

Decrease in solvent evaporation rate due to phrase separation in polymer films Reviewed International journal

M. Yamamura, K. Horiuchi, T. Kajiwara, K. Adachi

AIChE Journal   2002.11

Decrease in solvent evaporation rate due to phase separation in polymer films Reviewed

Masato Yamamura, Kouhei Horiuchi, Toshihisa Kajiwara, Kitaro Adachi

AIChE Journal   48 ( 11 )   2711 - 2714   2002.11

Humidity-induced secondary phrase separation in a multizone driner Reviewed International journal

M. Yamamura, T. Mikuriya, T. Kajiwara, K. Adachi

Industrual and Engineering Chemitry Research   2002.8

Humidity-induced secondary phase separation in a multizone drier Reviewed

Masato Yamamura, Takatoshi Mikuriya, Toshihisa Kajiwara, Kitaro Adachi

Industrial and Engineering Chemistry Research   41 ( 17 )   4409 - 4413   2002.8

Evaporation-induced pattern formation in polymer films via secondary phase separation Reviewed

Masato Yamamura, Takatoshi Nishio, Toshihisa Kajiwara, Kitaro Adachi

Chemical Engineering Science   57 ( 15 )   2901 - 2905   2002.8

Evaporation-induced pattern formation in polymer films via secondary phrase separation Reviewed International journal

M. Yamamura, T. Nishio, T. Kajiwara, K. Adachi

Chemical Engineering Science   2002.8

3-D Numerical Analysis on the Mixing Performance for Assemblies With Filled Zone of Right-Handed & Left-Handed Double-Flighted Screws and Kneading Blocks in Twin-Screw Extrudes Reviewed International journal

K. Funatsu, S. Kihara, M. Miyazaki, S. Katsuki, T. Kajiwara

42 ( 4 )   707 - 723   2002.4

Numerical simulation of extrudate swell problem and evaluation of applicability of viscoelastic constitutive models 1. A study on axisymmetric extrudate swell from a straight die Reviewed

Toshihisa Kajiwara, Hideki Tomiyama, Yumi Sueyoshi, Masato Yamamura, Kitaro Adachi

Nihon Reoroji Gakkaishi   29 ( 1 )   47 - 52   2001.12

Effect of stepwise change of drying rate on microstructure evolution in polymer films Reviewed

M. Yamamura, T. Nishio, T. Kajiwara, K. Adachi

Drying Technology   19 ( 7 )   1397 - 1410   2001.10

Viscoelastic simulation of film casting process for a polymer melt Reviewed

Naoki Satoh, Hideki Tomiyama, Toshihisa Kajiwara

Polymer Engineering and Science   41 ( 9 )   1564 - 1579   2001.9

Experimental investigation of air entrainment in a vertical liquid jet flowing down onto a rotating roll Reviewed

Masato Yamamura, Satoshi Suematsu, Toshihisa Kajiwara, Kitaro Adachi

Chemical Engineering Science   55 ( 5 )   931 - 942   2000.3

Numerical simulations of annular extrudate swell using various types of viscoelastic models Reviewed

Yasuhiko Otsuki, Toshihisa Kajiwara, Kazumori Funatsu

Polymer Engineering and Science   39 ( 10 )   1969 - 1981   1999.1

Studies on the numerical simulation of polymeric liquid flow and polymer processing Reviewed

Toshihisa Kajiwara

Nihon Reoroji Gakkaishi   27 ( 4 )   219 - 226   1999.1

Numerical simulation of multi-layer flow for polymer melts - A study of the effect of viscoelasticity on interface shape of polymers within dies Reviewed

K. Matsunaga, Toshihisa Kajiwara, K. Funatsu

Polymer Engineering and Science   38 ( 7 )   1099 - 1111   1998.1

High weissenberg number simulation of an annular extrudate swell using the differential type constitutive equation Reviewed

Shuichi Tanoue, Toshihisa Kajiwara, Yoshiyuki Iemoto, Kazumori Funatsu

Polymer Engineering and Science   38 ( 3 )   409 - 419   1998

Numerical simulations of annular extrudate swell of polymer melts Reviewed

Yasuhiko Otsuki, Toshihisa Kajiwara, Kazumori Funatsu

Polymer Engineering and Science   37 ( 7 )   1171 - 1181   1997.1

Numerical simulation of blow molding - Prediction of parison diameter and thickness distributions in the parison formation process Reviewed

Shuichi Tanoue, Toshihisa Kajiwara, Kazumori Funatsu, Kousuke Terada, Masashi Yamabe

Polymer Engineering and Science   36 ( 15 )   2008 - 2017   1996.8

Numerical study of twin-screw extruders by three-dimensional flow analysis - Development of analysis technique and evaluation of mixing performance for full flight screws Reviewed

Toshihisa Kajiwara, Yuki Nagashima, Yoshio Nakano, Kazumori Funatsu

Polymer Engineering and Science   36 ( 16 )   2142 - 2152   1996.8

Three-dimensional flow simulation of a film-casting process Reviewed

Kazutaka Sakaki, Ryuichi Katsumoto, Toshihisa Kajiwara, Kazumori Funatsu

Polymer Engineering and Science   36 ( 13 )   1821 - 1831   1996.7

Rheological characterization of controlled-rheology polypropylenes using integral equations Reviewed

G. Barakos, E. Mitsoulis, C. Tzoganakis, T. Kajiwara

Journal of Applied Polymer Science   59 ( 3 )   543 - 556   1996.1

Rheological characterization of polymer solutions and melts with an integral constitutive equation Reviewed

Toshihisa Kajiwara, G. Barakos, E. Mitsoulis

International Journal of Polymer Analysis and Characterization   1 ( 3 )   201 - 215   1995.11

Numerical simulation of blow molding—Viscoelastic flow analysis of parison formation Reviewed

35 ( 19 )   1546 - 1554   1995.1

High Weissenberg number simulation of die swell for differential type viscoelastic model by the streamline-upwind finite element method Reviewed

Yoshifumi Kuwano, Toshihisa Kajiwara, Kazumori Funatsu

Journal of Rheology   38 ( 3 )   755 - 756   1994.1

Numerical study on abrupt contraction flow of viscoelastic fluids including the inertia effect Reviewed

Shuichi Tanoue, Toshihisa Kajiwara, Kazumori Funatsu

Journal of Rheology   38 ( 3 )   754 - 755   1994.1

Numerical simulation of converging flow of polymer melts through a tapered slit die Reviewed

T. Kajiwara, S. Ninomiya, Y. Kuwano, K. Funatsu

Journal of Non-Newtonian Fluid Mechanics   48 ( 1-2 )   111 - 124   1993.7

High Weissenberg Number Simulation of Die Swell for Differential Type Viscoelastic Model by the Streamline-Upwind Finite Element Method Reviewed

Yoshifumi Kuwano, Toshihisa Kajiwara, Kazumori Funatsu

Nihon Reoroji Gakkaishi   21 ( 3 )   130 - 137   1993.1

Numerical Study on Abrupt Contraction Flow of Viscoelastic Fluids Including the Inertia Effect Reviewed

Shuichi Tanoue, Toshihisa Kajiwara, Kazumori Funatsu

Nihon Reoroji Gakkaishi   21 ( 3 )   123 - 129   1993.1

Numerical study on extrudate swell of polymer melts in extrusion from various dies Reviewed

Toshihisa Kajiwara, Yoshifumi Kuwano, Masahiko Sameshima, Kazumori Funatsu

Memoirs of the Kyushu University, Faculty of Engineering   51 ( 3 )   145 - 162   1991.9

Numerical Simulation of Fiber Orientation and Dispersion for Fiber-Filled Polymer Melts Reviewed

Toshihisa Kajiwara, Shuichi Tanoue, Yoshifumi Kuwano, Kazumori Funatsu

Transactions of the Japan Society of Mechanical Engineers Series B   57 ( 540 )   2740 - 2747   1991.1

Numerical simulation of die swell of polymer melts Reviewed

Toshihisa Kajiwara, Yukihiro Yoshida, Kazumori Funatsu

Proceedings of the 39th Japan National Congress for Applied Mechanics 1989 - NCTAM-39 Theoretical and Applied Mechanics   39   337 - 343   1990.12

Stress distribution and drag force in creeping flow around a falling sphere. Measurement by a flow-birefringence technique Reviewed

K. Funatsu, T. Kajiwara, Y. Shiraishi

International chemical engineering   28 ( 4 )   634 - 641   1988.10

APPROXIMATE ANALYSIS OF AN AXISYMMETRIC FIELD OF STRESS BY A TRANSMITTED-LIGHT, FLOW-BIREFRINGENCE TECHNIQUE. Reviewed

K. Funatsu, T. Kajiwara

International chemical engineering   28 ( 3 )   504 - 511   1988.1

Stress Distribution around the Bubbles Rising Continuously along One Vertical Axis in a Viscoelastic Fluid Reviewed

Kazumori Funatsu, Toshihisa Kajiwara, Yukihiro Shiraishi, Yuji Tsuruta

Nihon Reoroji Gakkaishi(Journal of the Society of Rheology, Japan)   15 ( 3 )   153 - 157   1987.1

Stress Distribution in Creeping Flow of a Viscoelastic Fluid around a Single Bubble Reviewed

Kazumori Funatsu, Toshihisa Kajiwara, Yukihiro Shiraishi, Hiroshi Matsuo

Nihon Reoroji Gakkaishi(Journal of the Society of Rheology, Japan)   15 ( 3 )   147 - 152   1987.1

An Approximate Analysis of Axisymmetric Stress Field by Using Transmission Light Flow Birefringence Technique Reviewed

Kazumori Funatsu, Toshihisa Kajiwara

kagaku kogaku ronbunshu   12 ( 5 )   575 - 581   1986.1

Stress Distribution in Creeping Flow around a Falling Sphere and Its Drag Force —Measurement by flow birefringence technique— Reviewed

12 ( 5 )   582 - 588   1986.1

Measurement of flow Characteristics of Viscoelastic Fluid by Mach-Zehnder Interferometry Reviewed

Kazumori Funatsu, Toshihisa Kajiwara, Hiroyuki Nishimura

Nihon Reoroji Gakkaishi(Journal of the Society of Rheology, Japan)   14 ( 1 )   30 - 36   1986.1

An approximate analysis of axisymmetric stress field by using transmission light flow birefringence technique. Reviewed

K. Funatsu, T. Kajiwara

kagaku kogaku ronbunshu   12 ( 5 , Sep. 1986, p.575-581. )   1986.1

最新 ミキシング技術の基礎と応用　《化学工学の進歩42》

梶原稔尚, 名嘉山祥也（ Role： Joint author）

三恵社  2008.10 

08　人工肝臓：人工臓器イラストレイティッド　日本人工臓器学会編

水本博，船津和守，梶原稔尚（ Role： Joint author）

はる書房  2007.11 

”ファイバー”　スーパーバイオミメティックス　〜近未来の新技術創成（3.2.2.2　肝臓（バイオリアクター型ナノファイバー））

中澤浩二，水本博，梶原稔尚，船津和守（ Role： Joint author）

エヌ・ティー・エス  2006.10 

生体工学概論：6.2 人工臓器工学

水本博，梶原稔尚，船津和守（ Role： Joint author）

コロナ社  2006.4 

分散技術大全集：シミュレーション技術を利用した分散指標の設定と評価（第11章，第3節）

梶原稔尚（ Role： Joint author）

情報機構  2005.7 

化学工学辞典（分担執筆）

梶原稔尚（ Role： Joint author）

丸善  2005.3 

機械工学便覧　応用システム編γ1　産業機械・装置：プラスチック加工機械（第4章　4・1総論）

梶原稔尚（ Role： Edit）

丸善  2005.1 

繊維便覧：人工肝臓（第4部門4・11・1節）

福田淳二，梶原稔尚，船津和守（ Role： Joint author）

丸善  2004.12 

構造工学ハンドブック：高分子材料の成形加工（第1章2.8節）

梶原稔尚（ Role： Joint author）

丸善  2004.3 

シミュレーションによる最適な混練、分散指標の設定：ポリマー混練・分散技術および具体的な不良要因とその対策、第5章

梶原稔尚、辻哲治、船津和守（ Role： Joint author）

情報技術協会  2003.12 

粘性流体の力学：レオロジー工学とその応用技術，第1編

梶原稔尚（ Role： Joint author）

フジ・テクノシステム  2001.1 

粘弾性流動解析用構成方程式：レオロジー工学とその応用技術，第3編

梶原稔尚（ Role： Joint author）

フジ・テクノシステム  2001.1 

ABCの流動・混練とコンピュータ支援：ポリマーABCハンドブック，成形加工編

梶原稔尚（ Role： Joint author）

エヌ・ティー・エス  2001.1 

高分子成形の計算機援用工学（CAE）

梶原稔尚（ Role： Joint author）

改訂6版　化学工学便覧  1999.2 

iPS細胞の三次元分化誘導培養における凝集体形状効果

水本博, 大賀美帆, 松下沙希子, 梶原稔尚

第18回日本再生医療学会総会  2018.3 

Melt-Mixing by Pitched-Tip Kneading Disks in a Twin-Screw Extruder - Experimental Verification - International conference

Toshihisa Kajiwara, Yasuya Namayama, Hiroki Takemitsu, Satoshi Esaki, Takahide Takeuchi, Koichi Kimura, Hideki Tomiyama

The XVIIth International Congress on Rheology (ICR2016)  2016.8 

計算機シミュレーションによる二軸スクリュ押出機の混練性能評価

梶原稔尚,　名嘉山祥也, 富山秀樹

第58回高分子討論会  2009.9 

二軸スクリュ押出機の溶融混練性能評価に対するCAE利用

梶原稔尚

プラスチック成形加工学会　第92回講演会　押出機による溶融混練  2006.6 

Stress Induced Mixing of Rotor Elements in Counter-Rotating Continuous Mixers International conference

T. Ishikawa,F. Nagano,T. Kajiwara

PPS-22 (the Polymer Processing Society,22nd Annual Meeting )  2006.7 

数値シュミレーションによる二軸スクリュ押出機の混練性能評価

梶原稔尚

平成18年度化学工学会　粒子・流体プロセス部会　ミキシング技術分科会・気泡塔分科会　合同夏季セミナー  2006.9 

高分子成形加工における複雑流体の計算機シュミレーション

梶原稔尚

日本機械学会流体工学部門　第1回複雑流体研究会  2006.10 

溝付きバレルを有する二軸スクリュ押出機内の溶融混練部の解析

谷殿真実，富山秀樹，名嘉山祥也，梶原稔尚

第14回 プラスチック成形加工学会 秋季大会(成形加工シンポジア’06)  2006.11 

数値シミュレーションによる高分子材料の混練評価

梶原稔尚

平成18年度　（社）化学工学会　粒子・流体プロセス部会セミナー「現象のシミュレーション解析と装置開発・プロセス操作への応用」  2007.1 

二軸スクリュ押出機に対する数値シミュレーション技術と評価手法の開発

梶原稔尚，藤野茂，名嘉山祥也，谷殿真実，影本真也，富山秀樹，石川健

第18回プラスチック成形加工学会年次大会  2007.6 

シミュレーションによる二軸押出機の混合・混練性能評価 Invited

梶原稔尚

技術情報協会セミナー：押出機における混練・分散の最適化と評価  2007.12 

押出成形研究の現状と課題 Invited

梶原稔尚

第16回プラスチック成形加工学会秋季大会（成形加工シンポジア'08）  2008.10 

「最新　ミキシング技術の基礎と応用」混練 Invited

梶原稔尚

第42回化学工学の進歩講習会  2008.11 

樹脂の構成式の基礎とCAE Invited

梶原稔尚

第14期非線形CAE協会勉強会  2008.12 

数値シミュレーションによる多層樹脂流れの三次元粘弾性流動解析

井ノ本健,梶原稔尚,藤野茂,名嘉山祥也

第58回理論応用力学講演会  2009.6 

多層粘弾性流動解析と界面不安定現象

梶原稔尚

第58回理論応用力学講演会  2009.6 

数値シミュレーションによる多層樹脂流れの三次元粘弾性流動解析

井ノ本健,梶原稔尚,藤野茂, 名嘉山祥也

第20回 プラスチック成形加工学会 年次大会  2009.6 

中空糸培養を用いたiPS細胞の肝分化誘導促進の試み

水本 博, 外牧 佑基, 梶原 稔尚

化学工学会第89年会  2024.3 

粘弾性流体中のブラウン運動の直接数値計算と周期境界条件下のマイクロレオロジー

名嘉山 祥也, 松岡 佑樹, 梶原 稔尚

化学工学会第89年会  2024.3 

中空糸を用いたiPS細胞の三次元培養における均一な細胞増殖のためのアプローチ

田村 健太, 水本 博, 梶原 稔尚

日本バイオマテリアル学会2023年度九州ブロック研究発表会  2023.12 

中空糸を用いた三次元培養におけるiPS細胞の肝成熟化

外牧 佑基, 水本 博, 梶原 稔尚

日本バイオマテリアル学会2023年度九州ブロック研究発表会  2023.12 

Study of Residence Time and Filling Ratio inside Counter-Rotating Continuous Mixer Using Partially Filled Flow Simulation Invited International conference

Toshihisa Kajiwara, Kazuhide Sekiyama, Yasuya Nakayama

Asia Australia Regional Meeting of Polymer Processing Society, PPS-2023  2023.11 

Hepatic maturation of differentiating iPS cells in a three-dimensional culture using hollow fibers International conference

Yuki Hokamaki, Hiroshi Mizumoto, Toshihisa Kajiwara

The 36th Annual and International Meeting of the Japanese Association for Animal Cell Technology (JAACT2023)  2023.11 

An approach for uniform cell growth in a three-dimensional culture of iPS cells using hollow fibers International conference

Kenta Tamura, Hiroshi Mizumoto, Toshihisa Kajiwara

The 36th Annual and International Meeting of the Japanese Association for Animal Cell Technology (JAACT2023)  2023.11 

Fabrication of hepatic tissue with mesenchymal stem cells using hollow fiber culture device International conference

Soutarou Shimauchi, Hiroshi Mizumoto, Toshihisa Kajiwara

The 36th Annual and International Meeting of the Japanese Association for Animal Cell Technology (JAACT2023)  2023.11 

粘弾性流体中のブラウン運動の直接数値計算と周期境界条件下のマイクロレオロジー

名嘉山祥也, 松岡佑樹, 梶原稔尚

第71回レオロジー討論会  2023.10 

粘弾性流体中のブラウン運動の直接数値計算と周期境界条件下のマイクロレオロジー

名嘉山祥也, 松岡佑樹, 梶原稔尚

日本流体力学会 年会2023  2023.9 

Finite system size correction in microrheological analysis under periodic boundary conditions: a direct numerical simulation International conference

Yasuya Nakayama, Yuki Matsuoka, Toshihisa Kajiwara

Advanced core-to-core network for the physics of self-organizing active matter: kickoff meeting  2023.9 

Rapid formation of fiber-like tissue construct from mesenchymal stem cells using hollow fiber

Hiroshi Mizumoto, Ryota Yamamoto, Shota Nakano, Toshihisa Kajiwara

2023.9 

Finite system size correction in microrheological analysis under periodic boundary conditions: a direct numerical simulation approach International conference

Yasuya Nakayama, Yuki Matsuoka, Toshihisa Kajiwara

The 7th International Soft Matter Conference, ISMC2023  2023.9 

Finite system size correction in microrheological analysis under periodic boundary conditions : a direct numerical simulation approach International conference

Yasuya Nakayama, Yuki Matsuoka, Toshihisa Kajiwara

XIXth International Congress on Rheology (ICR2023)  2023.7 

Improved melt-mixing in single-screw extrusion by geometry modification based on mixing mechanism International conference

Yasuya Nakayama, Taishi Fujihara, Koichi Kimura, Toshihisa Kajiwara

Yasuya Nakayama, Taishi Fujihara, Koichi Kimura, Toshihisa Kajiwara  2023.7 

Study of Residence Time and Filling Ratio inside Counter-Rotating Continuous Mixer Using Partially Filled Flow Simulation International conference

Toshihisa Kajiwara, Kazuhide Sekiyama, Yasuya Nakayama

13th SPSJ International Polymer Conference (IPC2023)  2023.7 

二軸スクリュ押出における切り欠きミキシングスクリュによる流動様式と混練

下川和也, 名嘉山祥也, 木村公一, 梶原稔尚

第60回化学関連支部合同九州大会  2023.7 

中空糸内三次元培養を用いたiPS細胞の心筋細胞分化

米原圭祐, 向野希, 水本 博, 梶原 稔尚

第60回化学関連支部合同九州大会  2023.7 

Finite system size correction in microrheological analysis under periodic boundary conditions : a direct numerical simulation approach International conference

Yasuya Nakayama, Yuki Matsuoka, Toshihisa Kajiwara

8th Pacific Rim Conference on Rheology (PRCR2023)  2023.5 

スフェロイドを用いたボトムアップ法による迅速組織形成法の開発

島内 崇太郎, 山本 涼太, 水本 博, 梶原 稔尚

日本バイオマテリアル学会2022年度九州ブロック研究発表会  2022.12 

酸素徐放が可能な細胞足場材料の作製とその酸素供給能評価

励 騰暢, 水本 博, 梶原 稔尚

日本バイオマテリアル学会2022年度九州ブロック研究発表会  2022.12 

Preparation of an oxygen release hydrogel and its functional evaluation for animal cell culture International conference

Tengchang Li, Ryowa Saito, Hiroshi Mizumoto, Toshihisa Kajiwara

The 33rd International Symposium on Chemical Engineering  2022.12 

Improved melt-mixing in single-screw extrusion by geometry modification based on mixing mechanism International conference

Taishi Fujihara, Yasuya Nakayama, Koichi Kimura, Toshihisa Kajiwara

The 33rd International Symposium on Chemical Engineering  2022.12 

混合メカニズムに基づく単軸押出混練エレメントの形状改善

冨土原 大志, 名嘉山 祥也, 木村 公一, 梶原 稔尚

プラスチック成形加工学会第30回秋季大会  2022.11 

混合メカニズムに基づく単軸押出混練エレメントの形状改善

名嘉山 祥也, 冨土原 大志, 木村 公一, 梶原 稔尚

第70回レオロジー討論会  2022.10 

ボトムアップ法によるscaffold-free培養組織の迅速形成

水本 博、山本　涼太、島内 崇太郎、中野 翔太、梶原 稔尚

化学工学会第53回秋季大会  2022.9 

一時的に酸素徐放が可能な細胞足場材料の作製とその機能評価

励 騰暢, 齊藤 凌我, 水本 博, 梶原 稔尚

第59回化学関連支部合同九州大会  2022.7 

混合メカニズムに基づく単軸押出混練エレメントの形状改善

冨土原大志, 名嘉山祥也, 木村公一, 梶原稔尚

第59回化学関連支部合同九州大会  2022.7 

間葉系幹細胞を用いた培養組織の迅速形成

島内 崇太郎, 山本 涼太, 水本 博, 梶原 稔尚

日本機械学会第34回バイオエンジニアリング講演会  2022.6 

肝細胞の中空糸内三次元培養における生存率改善

山城 寿, 外牧 佑基, 梶原 稔尚, 水本 博

日本機械学会第34回バイオエンジニアリング講演会  2022.6 

ダルメージスクリュの分配混合性能の形状因子依存性

木村 公一, 名嘉山 祥也, 冨土原 大志, 梶原 稔尚

プラスチック成形加工学会 第33回年次大会  2022.6 

Geometry effects on melt-mixing by Dulmage-type screws in single-screw extrusion International conference

Taishi Fujihara, Yasuya Nakayama, Koichi Kimura, Toshihisa Kajiwara

the 37 International Conference of the Polymer Processing Society (PPS-37)  2022.4 

Non-monotonic dependence of disctributive mixing of a Dulmage screw in single screw extrusion on the operating conditions International conference

Yasuya Nakayama, Koichi Kimura, Toshihisa Kajiwara

the 37 International Conference of the Polymer Processing Society (PPS-37)  2022.4 

Direct numerical simulation of shear-thickening phenomena in a particle suspension in a viscoelastic fluid International conference

Yuki Matsuoka, Yasuya Nakayama, Toshihisa Kajiwara

the 37 International Conference of the Polymer Processing Society (PPS-37)  2022.4 

ダルメージ型スクリュによる単軸スクリュ押出機の混合特性: 非単調な操作条件依存性

名嘉山 祥也, 木村 公一, 梶原 稔尚

化学工学会第87年会  2022.3 

Prediction of shear thickening of particle suspensions in viscoelastic fluids by direct numerical simulation（[部会賞] フロンティア賞2021） Invited

化学工学会第87年会  2022.3 

溶融混練における伸長流動を利用した分散混合強化 Invited

梶原稔尚

化学工学会　粒子・流体プロセス部会　ミキシング技術分科会　2021年度九州・中国地区ミキシング技術サロン  2022.3 

溶融混練における伸長流動を利用した分散混合強化 Invited

梶原稔尚

プラスチック成形加工学会　2021年度第3回押出成形専門委員会  2022.1 

中空糸内三次元培養によるiPS細胞の効率的な内胚葉分化の試み

井形真也, 谷口諒, 水本博, 梶原稔尚

日本バイオマテリアル学会2021年度九州ブロック学術講演会  2021.12 

初代肝細胞の中空糸内三次元培養における生存率および機能発現解析：内径およびアポトーシス阻害剤添加効果

水本博, 山城寿, 梶栗尚明, 梶原稔尚

日本動物実験代替法学会第34回大会  2021.11 

ダルメージ型スクリュによる単軸スクリュ押出機の混合特性：非単調な操作条件依存性

名嘉山 祥也, 木村 公一, 梶原 稔尚

第69回レオロジー討論会  2021.10 

中空糸を用いたiPS細胞の増殖と内胚葉分化誘導

水本 博、谷口 諒、井形 真也、梶原 稔尚

化学工学会第52回秋季大会  2021.9 

中空糸内三次元培養によるiPS細胞の内胚葉分化誘導

水本 博、谷口 諒、井形 真也、梶原 稔尚

日本動物細胞工学会2021年度大会  2021.7 

ダルメージ型スクリュによる単軸スクリュ押出機の混合特性：非単調な操作条件依存性

山田真生, 名嘉山祥也, 梶原稔尚, 木村公一

第５８回化学関連支部合同九州大会  2021.7 

肝細胞の中空糸内三次元培養における生存率解析とその向上に関する検討

山城寿、梶栗尚明、水本博、梶原稔尚

第58回化学関連支部合同九州大会  2021.7 

粘弾性流体中に微粒子が分散した系のレオロジーの直接計算

名嘉山祥也，松岡佑樹，梶原稔尚

プラスチック成形加工学会 第32回年次大会  2021.6 

間葉系幹細胞からなる紐状組織形成法の開発

水本博、中野翔太、梶原稔尚

第60回日本生体医工学会大会･第36回日本生体磁気学会大会  2021.6 

中空糸を用いたiPS細胞の高密度培養と内胚葉分化

水本博、谷口諒、梶原稔尚

第20回日本再生医療学会総会  2021.3 

中空糸を鋳型とした間葉系幹細胞由来三次元組織の形成誘導

中野翔太、水本博、梶原稔尚

日本バイオマテリアル学会2020年度九州ブロック学術講演会  2021.1 

Rheological evaluation of particle suspensions in viscoelastic fluids using the smoothed profile method International conference

@Yasuya Nakayama,# Yuki Matsuoka,@ Toshihisa Kajiwara

XVIIIth International Congress on Rheology (ICR2020)  2020.12 

Time-domain microrheological evaluation of colloidal suspensions International conference

@Yasuya Nakayama, #Yuki Matsuoka, @Toshihisa Kajiwara

XVIIIth International Congress on Rheology (ICR2020)  2020.12 

中空糸内三次元培養を用いたiPS細胞の内胚葉分化誘導

谷口諒、水本博、梶原稔尚

化学工学会九州支部オンライン学生発表会  2020.12 

粘弾性流体中の分散系におけるshear-thickening

@名嘉山祥也，#松岡佑樹，@梶原稔尚

日本流体力学会 年会2020  2020.9 

粘弾性流体中の分散系におけるシアシックニング

@名嘉山祥也，#松岡佑樹，@梶原稔尚

化学工学会 第51回秋季大会  2020.9 

単軸押出機用フィン型スクリュの分配混合性能の変動メカニズムの調査

#木村公一，@名嘉山祥也，@梶原稔尚

プラスチック成形加工学会第31回年次大会  2020.6 

粘弾性流体中に微粒子が分散した系のレオロジーの直接数値計算

@名嘉山祥也, #松岡佑樹，@梶原稔尚

プラスチック成形加工学会第31回年次大会  2020.6 

中空糸内三次元培養を用いたiPS細胞の分化誘導における幾何形状効果

水本 博、大賀 美帆、松下 沙希子、#谷口 諒、#野元 渚生、梶原 稔尚

化学工学会第85年会  2020.3 

粘弾性流体中の分散系におけるシアシックニング

名嘉山 祥也, 松岡 佑樹, 梶原 稔尚

化学工学会 第85年会  2020.3 

粘弾性流体中の粒子分散系の振動せん断レオロジー

上村 尭巳, 松岡 佑樹, 名嘉山 祥也, 梶原 稔尚

第22回化学工学会学生発表会(岡山大会)  2020.3 

スフェロイドを用いたボトムアップ法による高機能肝組織の構築

水本 博、#佐々木 浩二、#岳 玥、梶原 稔尚

2020年日本生体医工学会九州支部学術講演会  2020.1 

遺伝子導入ヘパトーマ細胞の中空糸内三次元培養法の開発とバイオ人工肝臓への応用

#石橋 知樹、水本 博、上平 正道、梶原 稔尚

日本バイオマテリアル学会第9回九州ブロック講演会  2020.1 

中空糸を鋳型とした紐状組織構築に関する研究

水本 博、#中野 翔太、#佐々木 浩二、#岳 玥、#劉 懐旭、梶原 稔尚

日本バイオマテリアル学会第9回九州ブロック講演会  2020.1 

Stochastic Smoothed-Profile 法とサスペンションにおけるブラウン運動

松岡 佑樹, 名嘉山 祥也, 梶原 稔尚

粉体工学会２０１８年度第２回 「西日本談話会」  2019.12 

Evaluation of a hollow fiber culture with genetically engineered hepatoma cells in developing a bioartificial liver device International conference

#Tomoki Ishibashi, Hiroshi Mizumoto, Masamichi Kamihira, Toshihisa Kajiwara

2019.11 

Evaluation of growth and differentiation profile of iPS cells in a hollow fiber culture device International conference

Hiroshi Mizumoto, Sakiko Matsushita, Ryo Taniguchi, Yusuke Takasuka, Toshihisa Kajiwara

2019.11 

Preparation of heparin-conjugated collagen gel and its application to a scaffold for formation of a hepatic tissue International conference

#YueYue, #Kohji Sasaki, Yuki Naruo, Hiroshi Mizumoto,Hiroyuki Ijima, Toshihisa Kajiwara

2019.11 

流動プロセスの流れ場のトポロジー

名嘉山 祥也, 梶原 稔尚

第27回プラスチック成形加工学会秋季大会 成形加工シンポジア'19  2019.11 

粘弾性流体中粒子分散系レオロジーの直接数値計算：粒子体積分率の影響

松岡 佑樹, 名嘉山 祥也, 梶原 稔尚

第67回レオロジー討論会  2019.10 

Flow classification and its application to fluid processing International conference

Yasuya Nakayama, Toshihisa Kajiwara

18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019)  2019.9 

Expansion and differentiation profile of human iPS cells in a three-dimensional culture using hollow fibers. International conference

Hiroshi Mizumoto, Sakiko Matsushita, Yusuke Takasuka, Toshihisa Kajiwara

The 18th Asia Pacific Confederation of Chemical Engineering Congress  2019.9 

Direct numerical simulation of shear-thickening in dilute suspensions in a viscoelastic fluid International conference

Yuki Matsuoka, Yasuya Nakayama, Toshihisa Kajiwara

18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019)  2019.9 

二軸スクリュ押出機によるポリマーブレンドの溶融混練解析と実験検証 Invited

梶原稔尚

化学工学会粒子・流体プロセス部会ミキシング技術分科会夏期セミナー  2019.8 

中空糸を鋳型とした間葉系細胞の三次元組織構築

#中野 翔太、水本 博、梶原 稔尚

第56回化学関連支部合同九州大会  2019.7 

中空糸を用いた三元培養によるiPS細胞の増殖と内胚葉分化

#谷口 諒、松下 沙希子、大賀 美帆、水本 博、梶原 稔尚

第56回化学関連支部合同九州大会  2019.7 

溶融混練シミュレーションによる高分子材料のフィラー分散評価 Invited

梶原稔尚

高分子学会第24回高分子計算機科学研究会講座  2019.6 

粘弾性流体中希薄粒子分散系のshear thickening現象に関する直接数値計算

松岡 佑樹, 名嘉山 祥也, 梶原 稔尚

日本レオロジー学会 第46年会  2019.5 

Shear-thickening in a dilute suspension of spheres in a weakly viscoelastic fluid: an approach with a direct numerical simulation International conference

Yuki Matsuoka, Yasuya Nakayama, Toshihisa Kajiwara

Annual European Rheology Conference 2019 (AERC 2019), Portoroz/Slovenia  2019.4 

MIXING CHARACTERISTICS OF DIFFERENT KNEADING ELEMENTS IN A TWIN-SCREW EXTRUDER: A NUMERICAL STUDY AND AN EXPERIMENTAL VERIFICATION International conference

Yasuya Nakayama, Hiroki Takemitsu, Satoshi Esaki, Toshihisa Kajiwara, Koichi Kimura, Takeuchi Takahide, Tomiyama Hideki

Asian Workshop on Polymer Processing 2018 (AWPP2018)  2018.12 

EVALUATION OF DISTRIBUTIVE MIXING PERFORMANCE OF FIN TYPE SCREW FOR A SINGLE SCREW EXTRUDER International conference

Koichi Kimura, Yasuya Nakayama, Toshihisa Kajiwara

Asian Workshop on Polymer Processing 2018 (AWPP2018)  2018.12 

Shear-thickening in a dilute suspension of spheres in a weakly viscoelastic fluid: an approach with a direct numerical simulation International conference

Yuki Matsuoka, Yasuya Nakayama, Toshihisa Kajiwara

Soft Matter Physics: from the perspective of the essential heterogeneity, Nishijin Plaza  2018.12 

単軸混練スクリュの分配混合性能におけるスクリュ回転数依存性の調査

木村 公一, 名嘉山 祥也, 梶原 稔尚

第26回プラスチック成形加工学会秋季大会 成形加工シンポジア'18(浜松)  2018.11 

Fabrication of functional hepatic tissue by a bottom-up method using multicellular spheroids as building blocks. International conference

Hiroshi Mizumoto

The 5th SKY International Joint Symposium on Green Chemistry and Clean Technology  2018.11 

直接数値計算による粘弾性流体中微粒子分散系の流動挙動解析

松岡 佑樹, 名嘉山 祥也, 梶原 稔尚

第66回レオロジー討論会  2018.10 

低塩濃度極限における非線型電気泳動

名嘉山 祥也, 伊藤 恵，梶原 稔尚

第66回レオロジー討論会  2018.10 

フィン型混練スクリュの分配混合性能の評価

木村 公一, 名嘉山 祥也, 梶原 稔尚

第66回レオロジー討論会  2018.10 

Impacts of Pitched Tips of Kneading Element in Twin-Screw Extrusion: Tuning Flow Pattern and Mixing Performance International conference

Yasuya Nakayama, Hiroki Takemitsu, Toshihisa Kajiwara, Koichi Kimura, Takeuchi Takahide, Tomiyama Hideki

2018.9 

Functional analysis of heparin-conjugated collagen gel as a scaffold for regenerative medicine International conference

5th TERMIS World Congress 2018  2018.9 

Isolation and characterization of an endodermal cell population in a three-dimensional culture of human iPS cells using hollow fibers International conference

5th TERMIS World Congress 2018  2018.9 

Functional Evaluation of a Hepatic Tissue Constructed from Multicellular Spheroids International conference

5th TERMIS World Congress 2018  2018.9 

中空糸を用いたiPS細胞の分化誘導培養における中空糸径効果

#大賀美帆, #松下沙希子, @水本博, @梶原稔尚

第55回化学関連支部合同九州大会  2018.6 

Nonlinear Electrophoresis in the Salt-free Limit International conference

Kei Ito, Yasuya Nakayama, Toshihisa Kajiwara

The 7th Pacific Rim Conference on Rheology (PRCR 2018)  2018.6 

ゴム成形加工における金型内部への充填解析

松本貢，山田功司, 宮松宣隆, 梶原稔尚, 名嘉山祥也, 中野壮一郎, 徐炎

日本ゴム協会 2018 年年次大会  2018.5 

Evaluation of Distributive Mixing Performance of Fin Type Screw for Single-Screw Extruder International conference

Koichi Kimura, Hideki Tomiyama, Yasuya Nakayama, Toshihisa Kajiwara

34th International Conference of the Polymer Processing Society (PPS-34)  2018.5 

Characterization of melt-mixing in extrusion: finite-time Lyapunov exponent and flow pattern structure International conference

Yasuya Nakayama, Hiroki Takemitsu, Toshihisa Kajiwara, Koichi Kimura, Takahide Takeuchi, Hideki Tomiyama

34th International Conference of the Polymer Processing Society (PPS-34)  2018.5 

中空糸内三次元培養を用いたiPS細胞由来内胚葉系細胞の大量調製に関する基礎検討

松下沙希子、水本博、梶原稔尚

第17回日本再生医療学会総会  2018.3 

中空糸を用いた肝組織形成プロセスの最適設計-組織形成誘導過程における生存率評価-

水本博、赤岡智彬、梶原稔尚

第17回日本再生医療学会総会  2018.3 

粘弾性流体中の粒子分散系の直接数値計算 : 希薄粒子分散系におけるshear thickening現象

松岡 佑樹, 名嘉山 祥也, 梶原 稔尚

化学工学会 第84年会  2018.3 

中空糸内三次元培養を用いた肝組織形成誘導プロセスにおける中空糸径効果

水本博、赤岡智彬、梶原稔尚

化学工学会第83年会  2018.3 

幹細胞の高密度培養プロセスのための増殖因子徐放粒子の開発

江本雄一、水本博、白木川奈菜、井嶋博之、梶原稔尚

第7回日本バイオマテリアル学会九州ブロック講演会  2017.12 

中空糸を用いた肝組織形成誘導プロセスにおける中空糸径効果

赤岡智彬、水本博、梶原稔尚

第7回日本バイオマテリアル学会九州ブロック講演会  2017.12 

ボトムアップ法による肝-内皮-間葉系細胞からなる培養組織の構築と性能評価

薮田涼平、奥平達也、水本博、梶原稔尚

第7回日本バイオマテリアル学会九州ブロック講演会  2017.12 

Functional and structural analysis of a fiber-type hepatic tissue fabricated by a bottom-up method using multilayer spheroids International conference

Hiroshi Mizumoto, Tatsuya Okudaira, Ryohei Yabuta, Toshihisa Kajiwara

TERMIS AP 2017  2017.9 

Generation of Endodermal Cells from Human iPS Cells in A Three-Dimensional Culture Using Hollow Fibers International conference

Sakiko Matsushita, Hiroshi Mizumoto, Toshihisa Kajiwara

TERMIS AP 2017  2017.9 

Hepatic Tissue Construction using Genetivally Engineered Hepatoma Cells through a Bottom-up Method International conference

Huaixu Liu, Tatsuya Okudaira, Hiroshi Mizumoto, Masamichi Kamihira, Toshihisa Kajiwara

TERMIS AP 2017  2017.9 

In vitro and ex vivo functional evaluation of a hollow fiber-type bioartificial liver module containing ES cell-derived hepatic cells

Hiroshi Mizumoto, Naoki Amimoto, Toru Miyazawa, Hideki Tani, Kaoru Ikeda, Toshihisa Kajiwara

2017.9 

THREE-DIMENTIONAL HEPATIC TISSUE FABRICATION USING MULTILAYER SPHEROIDS AS BASIC CONSTRUCTION UNIT International conference

Huaixu Liu, Tatsuya Okudaira, Hiroshi Mizumoto, Masamichi Kamihira, Toshihisa Kajiwara

Biomaterials International 2017  2017.8 

GENERATION OF ENDODERMAL CELLS FROM HUMAN IPS CELLS IN A THREE-DIMENSIONAL CULTURE USING HOLLOW FIBERS International conference

Sakiko Matsushita, Hiroshi Mizumoto, Toshihisa Kajiwara

Biomaterials International 2017  2017.8 

HEMATOPOIETIC DIFFERENTIATION OF MOUSE AND HUMAN PLURIPOTENT STEM CELLS IN A THREE-DIMENSIONAL CULTURE USING HOLLOW FIBERS International conference

Yu Nakano, Shinya Iwanaga, Hiroshi Mizumoto, Toshihisa Kajiwara

Biomaterials International 2017  2017.8 

Construction of a hepatic tissue using spheroids by a bottom-up approach

2017.7 

二軸スクリュ溶融混練における傾斜チップの効果:流動パターンのチューニング

名嘉山 祥也, 竹光洋樹, 梶原 稔尚, 木村公一, 竹内貴季, 富山秀樹

化学工学会 第82年会 (東京 2017)  2017.3 

多層化スフェロイドの自己組織化による血管化肝組織構築の試み

水本 博, 奥平　達也, 薮田　涼平, 梶原 稔尚

化学工学会第82年会  2017.3 

二軸スクリュ溶融混練における混練エレメントの形状と混練性能の関係

竹光洋樹, 名嘉山 祥也, 梶原 稔尚

平成28年度粒子・流体プロセス部会 総会・部会セミナー  2017.3 

移植用肝グラフト構築のための臓器培養回路の開発

中村 俊介, 坂本　裕希, 白木川 奈菜, 水本 博, 井嶋 博之

日本生体医工学会九州支部学術講演会  2017.3 

Generation of functional hepatocyte-like cells from human induced pluripotent stem cells in a three-dimensional culture using hollow fibers. International conference

Hiroshi Mizumoto, Sakiko Matsushita, Toshihisa Kajiwara

Tissue Engineering & Regenerative Medicine International Society-Americas Meeting 2016  2016.12 

Hematopoietic differentiation of pluripotent stem cells in a three-dimensional culture using hollow fibers. International conference

Yu Nakano, Shinya Iwanaga, Hiroshi Mizumoto, Toshihisa Kajiwara

Tissue Engineering & Regenerative Medicine International Society-Americas Meeting 2016  2016.12 

Scalable expansion of pluripotent stem cells in a three-dimensional culture using hollow fibers. International conference

Hiroshi Mizumoto, Hirofumi Nagayama, Naoki Amimoto, Toshihisa Kajiwara

Tissue Engineering & Regenerative Medicine International Society-Americas Meeting 2016  2016.12 

Development of a hollow fiber-type bioartificial liver using genetically engineered hepatoma cells in three-dimensional culture configuration. International conference

Yusuke Fujii, Tatsuya Okudaira, Kengo Higashi, Hiroshi Mizumoto, Masamichi Kamihira, Toshihisa Kajiwara

Tissue Engineering & Regenerative Medicine International Society-Americas Meeting 2016  2016.12 

Impacts of mixing elements on mixing characteristics in twin-screw extrusion International conference

Hiroki Takemitsu, Yasuya Namayama, Toshihisa Kajiwara, Koichi Kimura, Takahide Takeuchi, Hideki Tomiyama

International Symposium on Chemical Engineering 2016  2016.12 

Mixing characteristic of different kneading elements: An experimental study International conference

Satoshi Esaki, Kenta Nakao, Yasuya Namayama, Toshihisa Kajiwara, Koichi Kimura, Takahide Takeuchi, Hideki Tomiyama

International Symposium on Chemical Engineering 2016  2016.12 

Construction of A Hepatic Tissue Using Genetically Engineered Hepatoma Cells International conference

Liu Huaixu, Yusuke Fujii, Tatsuya Okudaira, Hiroshi Mizumoto, Masamichi Kamihira, Toshihisa Kajiwara

The 29th International Symposium on Chemical Engineering  2016.12 

Effect of heparin-conjugated collagen gel on formation of a vascularized hepatic tissue International conference

Yuki Naruo, Tatsuya Okudaira, Nana Shirakigawa, Hiroyuki Ijima, Hiroshi Mizumoto, Toshihisa Kajiwara

The 29th International Symposium on Chemical Engineering  2016.12 

Evaluation of a hollow fiber-type bioartificial liver device using genetically engineered hepatoma cells International conference

Kengo Higashi, Yusuke Fujii, Hiroshi Mizumoto, Masamichi Kamihira, Toshihisa Kajiwara

The 29th International Symposium on Chemical Engineering  2016.12 

中空糸型培養装置による ES 細胞の肝分化誘導とバイオ人工肝臓への応用

水本 博, 網本　直記, 宮沢　徹, 谷　秀樹, 黒田　匡志, 梶原 稔尚

第43回日本臓器保存生物医学会学術集会  2016.11 

種々の三次元培養法による多能性幹細胞由来造血幹細胞の効率的取得に関する検討

中野　優, 岩永　慎也, 水本 博, 梶原 稔尚

日本バイオマテリアル学会シンポジウム2016  2016.11 

血管化肝組織形成誘導におけるヘパリン導入コラーゲンゲルの添加効果

成尾　勇希, 奥平　達也, 白木川 奈菜, 井嶋 博之, 水本 博, 梶原 稔尚

日本バイオマテリアル学会シンポジウム2016  2016.11 

ヒト iPS 細胞の中空糸内三次元培養における bFGF 固定化ゼラチン粒子の添加効果

江本　雄一, 成尾　勇希, 白木川 奈菜, 井嶋 博之, 水本 博, 梶原 稔尚

日本バイオマテリアル学会シンポジウム2016  2016.11 

中空糸内三次元培養を利用したヒト iPS 細胞由来内胚葉系細胞の大量調製に関する検討

松下　沙希子, 水本 博, 梶原 稔尚

日本バイオマテリアル学会シンポジウム2016  2016.11 

Generation of Endodermal Cells from Human iPS Cells in A Three-Dimensional Culture Using Hollow Fibers International conference

Sakiko Matsushita, Hiroshi Mizumoto, Toshihisa Kajiwara

The 29th Annual and International Meeting of Japanese Association for Animal Cell Technology  2016.11 

A Hollow Fiber Culture Device for Large Scale Cultivation of Pluripotent Stem Cells International conference

Hiroshi Mizumoto, Hirofumi Nagayama, Yusuke Takasuka, Naoki Amimoto

The 29th Annual and International Meeting of Japanese Association for Animal Cell Technology  2016.11 

Generation of Hematopoietic Stem Cells from Mouse and Human Pluripotent Stem Cells in A Three-dimensional Culture using Hollow Fibers International conference

Yu Nakano, Shinya Iwanaga, Hiroshi Mizumoto, Toshihisa Kajiwara

The 29th Annual and International Meeting of Japanese Association for Animal Cell Technology  2016.11 

A Hollow Fiber-type Bioartificial Liver Device Using Genetically Engineered Hepatoma Cells International conference

Yusuke Fujii, Tatsuya Okudaira, Kengo Higashi, Hiroshi Mizumoto, Masamichi Kamihira, Toshihisa Kajiwara

The 29th Annual and International Meeting of Japanese Association for Animal Cell Technology  2016.11 

二軸スクリュ溶融混練における混練エレメントの形状と混練性能の関係

竹光洋樹, 名嘉山 祥也, 梶原 稔尚, 木村公一, 竹内貴季, 富山秀樹

第64回レオロジー討論会  2016.10 

A three-dimensional culture using hollow fibers for large scale expansion of pluripotent stem cells International conference

Hiroshi Mizumoto, Hirofumi Nagayama, Naoki Amimoto, Yusuke Takasuka, Toshihisa Kajiwara

The 22nd Symposium of Young Asian Biological Engineers' Community  2016.10 

Prediction of Mixing Performance for Glass Fiber Dispersion in a Twin-Screw Extruder Using Numerical Simulation International conference

Toshihisa Kajiwara, Yasuya Namayama, Kunihiro Hirata, Hiroshi Ishida, Motohiro Hiragori

International Workshop on Process Intensification 2016 ( IWPI 2016 )  2016.9 

二軸スクリュ溶融混練における混練エレメントの形状と混練性能の関係

竹光洋樹, 名嘉山 祥也, 梶原 稔尚, 木村公一, 竹内貴季, 富山秀樹

化学工学会 第48回秋季大会 (徳島 2016)  2016.9 

二軸スクリュ押出機における混練エレメントの性能評価

江崎哲史, 中尾建太, 名嘉山 祥也, 梶原 稔尚, 木村公一, 竹内貴季, 富山秀樹

化学工学会 第48回秋季大会 (徳島 2016)  2016.9 

Strain Mode of General Flow: Characterization and Implications for Flow Pattern Structures International conference

Yasuya Namayama, Tatsunori Masaki, Toshihisa Kajiwara

The XVIIth International Congress on Rheology (ICR2016)  2016.8 

Melt-Mixing by Pitched-Tip Kneading Disks in a Twin-Screw Extruder - Experimental Verification - International conference

Toshihisa Kajiwara, Yasuya Namayama, Hiroki Takemitsu, Satoshi Esaki, Takahide Takeuch, Koichi Kimura, Hideki Tomiyama

The 32nd International Conference of the Polymer Processing Society (PPS-32)  2016.7 

中空糸内での肝組織構築における中空糸径の効果

赤岡　智彬, 奥平　達也, 水本 博, 梶原 稔尚

第53回化学関連支部合同九州大会  2016.7 

二軸スクリュ押出機における異なる混練エレメントの混練性能

中尾建太, 江崎哲史, 竹光洋樹, 名嘉山 祥也, 梶原 稔尚, 木村公一, 竹内貴季, 富山秀樹

第53回化学関連支部合同九州大会  2016.7 

ボトムアップ法による高機能肝組織構築における間葉系細胞の添加効果

薮田　涼平, 奥平　達也, 水本 博, 梶原 稔尚

第53回化学関連支部合同九州大会  2016.7 

ヒトiPS細胞の中空糸内三次元培養における増殖因子固定化ゼラチン粒子の添加効果

江本　雄一, 成尾　勇希, 永井　貴之, 白木川 奈菜, 井嶋 博之, 水本 博, 梶原 稔尚

第53回化学関連支部合同九州大会  2016.7 

中空糸内三次元培養を用いたiPS細胞由来内胚葉系細胞の大量調製に関する基礎検討

松下　沙希子, 水本 博, 梶原 稔尚

第15回日本再生医療学会総会  2016.3 

中空糸内三次元培養を利用した多能性幹細胞の大量培養に関する検討

水本 博, 高須賀　祐介, 永山　浩史, 網本 直記, 梶原 稔尚

第15回日本再生医療学会総会  2016.3 

ミコセルを用いた機能性細胞の三次元培養

井嶋 博之, 池上　康寛, 木村　遥奈, 白木川 奈菜, 水本 博, 牧野　朋未, 藤林　輝久, 仲田　拓馬, 堀川　洋, 今瀬　将人

第15回日本再生医療学会総会  2016.3 

多層型スフェロイドを利用したボトムアッププロセスによる複合型肝組織の構築

奥平　達也, 成尾　勇希, 原田　祐希, 白木川 奈菜, 水本 博, 井嶋 博之, 梶原 稔尚

第15回日本再生医療学会総会  2016.3 

バイオ人工肝臓の基盤技術としての遺伝子導入ヘパトーマ細胞の中空糸内三次元培養

藤井　祐輔, 水本 博, 上平 正道, 梶原 稔尚

第15回日本再生医療学会総会  2016.3 

混練機形状による流動パターンと伸張流動の分布

名嘉山 祥也, 正木 辰典, 梶原 稔尚

化学工学会 第81年会 (2016)  2016.3 

二軸スクリュ押出機内の傾斜チップニーディングディスクによる溶融混練

梶原 稔尚, 名嘉山 祥也, 竹光 洋樹, 江崎 哲史, 竹内貴季, 木村公一, 富山秀樹

粉体工学会2015年度第2回西日本談話会  2015.12 

Hematopoietic differentiation of pluripotent stem cells in a three-dimensional culture using hollow fibers International conference

Yu Nakano, Hiroshi Mizumoto, Toshihisa Kajiwara

The 28th International Symposium on Chemical Engineering  2015.12 

Evaluation of liver specific functions of a genetically engineered mouse hepatoma cells in a three dimensional culture using hollow fibers. International conference

Yusuke Fujii, Hiroshi Mizumoto, Toshihisa Kajiwara, Masamichi Kamihira

The 28th International Symposium on Chemical Engineering  2015.12 

An initial approach for efficient differentiation of human iPS cells into hepatic lineage in a 3D culture using hollow fibers International conference

Sakiko Matsushita, Hiroshi Mizumoto, Toshihisa Kajiwara

The 28th International Symposium on Chemical Engineering  2015.12 

Melt-mixing by Pitched-tip Kneading Disks in a Twin-Screw Extruder International conference

Toshihisa Kajiwara, Yasuya Nakayama, Hiroki Takemitsu, Satoshi Esaki, Takahide Takeuchi, Koichi Kimura, Hideki Tomiyama

Asian Workshop on Polymer Processing 2015 (AWPP2015)  2015.12 

溶融混練されたブレンドの分散状態の画像解析

竹光 洋樹, 江崎 哲史, 名嘉山 祥也, 梶原 稔尚, 木村公一, 竹内貴季, 富山秀樹

プラスチック成形加工学会第23回秋季大会　成形加工シンポジア'15  2015.11 

二軸スクリュ押出機の溶融混練におけるニーディングディスクの形状と混練性能

江崎 哲史, 竹光 洋樹, 名嘉山 祥也, 梶原 稔尚, 木村公一, 竹内貴季, 富山秀樹

プラスチック成形加工学会第23回秋季大会　成形加工シンポジア'15  2015.11 

中空糸内三次元培養による遺伝子導入マウスヘパトーマ細胞の肝機能評価

藤井 祐輔, 水本 博, 上平 正道, 梶原 稔尚

第26回バイオフロンティア講演会  2015.10 

中空糸培養による多能性幹細胞から造血幹細胞への分化誘導

中野 優, 岩永 慎也, 水本 博, 梶原 稔尚

第26回バイオフロンティア講演会  2015.10 

内皮細胞に被覆されたスフェロイドの自己組織化による血管化肝組織構築の試み

奥平 達也, 成尾 勇希, 原田 祐希, 白木川 奈菜, 水本 博, 井嶋 博之, 梶原 稔尚

第26回バイオフロンティア講演会  2015.10 

混練過程の流動様式：局所的な定量化と大域的な混合への洞察

名嘉山 祥也, 正木　辰典, 梶原 稔尚

第63回レオロジー討論会  2015.9 

バイオ人工肝臓の基盤技術としての遺伝子導入マウスヘパトーマ細胞の中空糸培養

水本 博, 藤井 祐輔, 上平 正道, 梶原 稔尚

化学工学会第47回秋季大会  2015.9 

Fabrication of Functionally Hepatic Tissue by Bottom-up Method using Spheroids Covered with an Endothelial Layer International conference

Tatsuya Okudaira, Yuki Naruo, Hideyuki Mizumachi, Nana Shirakigawa, Hiroyuki Ijima, Hiroshi Mizumoto, Toshihisa Kajiwara

2015 4th TERMIS World Congress  2015.9 

Prediction of fiber dispersion for glass fiber reinforced plastics in a twin-screw extruder using flow simulation International conference

2015.9 

Numerical Study on Mixing Performance of Glass Fiber Dispersion in a Twin-Screw Extruder with Backward-Mixing Screw Elements International conference

2015 INTERNATIONAL SYMPOSIUM FOR ADVANCED MATERIALS RESEARCH (ISAMR 2015)  2015.8 

Prediction of Materials Behavior and Mixing in a Twin-Screw Extruder International conference

Toshihisa Kajiwara

Twin Screw Extruder) SEMINAR at ITRI (Industrial Technology Research Institute)  2015.8 

肝-内皮細胞複合組織形成誘導におけるヘパリン導入コラーゲンゲルの添加効果

成尾 勇希, 奥平 達也, 水町 秀之, 白木川 奈菜, 井嶋 博之, 水本 博, 梶原 稔尚

第52回化学関連支部合同九州大会  2015.6 

Strain mode of general flow: characterization and implication to mixing International conference

Yasuya Nakayama, Tatsunori Masaki, Toshihisa Kajiwara

31st International Conference of the POLYMER PROCESSING SOCIETY(PPS-31)  2015.6 

基礎を固める特別授業』高分子材料の溶融混練