Faculty Profiles - MORI SHOJI

Information

写真a

MORI SHOJI

Organization

Faculty of Engineering Department of Mechanical Engineering Professor
International Institute for Carbon-Neutral Energy Research （Concurrent）
School of Engineering （Concurrent）
Graduate School of Engineering Department of Mechanical Engineering（Concurrent）

Contact information

Homepage

http://therme.mech.kyushu-u.ac.jp/

External link

Research Areas

Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Fluid engineering

Degree

Dr. of Engineering

Research History

カーボンニュートラル・エネルギー国際研究所 Professor

2019.3 - Present

　 More details

researchmap
Yokohama National University

Education

Kyushu University 工学研究科機械工学専攻

2000.4 - 2003.3
Kyushu University 工学研究科機械工学専攻

1998.4 - 2000.3
Kyushu University 工学部機械工学科

1994.4 - 1998.3

Research Interests・Research Keywords

Research theme：熱流体工学

Keyword：熱流体工学

Research period： 2024
Research theme： Boiling

Keyword： Boiling

Research period： 2024
Research theme：多孔質

Keyword：多孔質

Research period： 2024
Research theme：二相流

Keyword：二相流

Research period： 2024

Awards

第49回日本原子力学会賞　論文賞

2017.3 日本原子力学会 CHF enhancement by honeycomb porous plate in saturated pool boiling of nanofluid
日本混相流学会技術賞

2016.8 日本混相流学会含水多孔質体を用いた過熱水蒸気の迅速・高効率生成に関する研究
第21回日本原子力学会熱流動部会部会賞優秀講演賞

2014.9 日本原子力学会ナノ流体とハニカム多孔質体を用いた飽和プール沸騰限界熱流束の向上
研究学術賞

2014.5 日本伝熱学会ハニカム多孔質体を用いた飽和プール沸騰の限界熱流束向上に関する研究
横浜国立大学発明表彰

2014.4 横浜国立大学急速過熱水蒸気生成技術
奨励賞

2004.4 日本機械学会鉛直上昇沸騰二相流中の流動障害物近傍におけるﾊﾞｰﾝｱｳﾄ発生機構解明に関する研究

▼display all

Papers

Effects of pore size distribution in a honeycomb porous plate on the onset of nucleate boiling in AE-3000

Wu, FF; Umehara, Y; Etoh, A; Mori, S

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 246 2025.8 （ ISSN:0017-9310 eISSN:1879-2189 ）

　More details

Publisher：International Journal of Heat and Mass Transfer

This study investigates the relationship between pore size distribution (PSD) on porous surfaces and the onset of nucleate pool boiling (ONB) for dielectric liquids. Reducing the boiling incipience (ΔT<inf>ONB</inf>) is critical for enhancing boiling heat transfer efficiency in immersion cooling, especially as data centers face increasing heat fluxes demands due to AI advancements. However, this relationship has not been thoroughly examined due to the complex dynamics of boiling initiation. To address this, three different honeycomb porous plates (HPPs) were fabricated and attached to an indium-tin oxide (ITO) heater for boiling experiments. Detailed assessments of the pores were conducted using scanning electron microscopy (SEM), CT scanning, and mercury penetration porosimetry. Additionally, a novel measurement technique that synchronized infrared with high-speed video cameras allowed for precise measurement of average ΔT<inf>ONB</inf>, local ΔT<inf>ONB</inf>, and hot spots. The results demonstrated that increasing pore size effectively lowers ΔT<inf>ONB</inf>, reducing the risk of temperature overshoot in electronics. Durability tests, including 48-hour immersion in AE-3000 liquid, revealed that HPPs with larger pore sizes maintained enhanced boiling performance over time. Re-entrant cavities, observed through CT scanning in the HPP with the largest pore size, contributed significantly to this stability. As a result, the heat transfer coefficient (HTC) was enhanced up to approximately 4.7 times compared to a plain surface. This increased HTC is especially beneficial for cooling schemes that demand efficient heat removal. These findings represent an initial step toward quantitatively understanding the principles of ΔT<inf>ONB</inf> control in the engineered porous surfaces, providing new guidelines for designing enhanced surfaces for future applications.

DOI： 10.1016/j.ijheatmasstransfer.2025.127066

Web of Science

Scopus
Effect of mesh size of Ni wire mesh electrodes on alkaline water electrolysis performance: A study based on the observation of bubble departure behavior

Wei, XS; Umehara, Y; Nakajima, H; Ito, K; Etoh, A; Mori, S

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 120 189 - 200 2025.4 （ ISSN:0360-3199 eISSN:1879-3487 ）

　More details

Publisher：International Journal of Hydrogen Energy

To enhance the compactness of electrolyzers and mitigate energy losses during high operating current densities, the concept of a zero-gap electrolytic cell design has been proposed, with wire mesh commonly utilized as electrodes owing to its cost effectiveness and easy fabrication. To achieve more efficient hydrogen production, many studies have been done on developing high-performance water electrolysis catalysts based on wire mesh electrode. The structure of wire mesh electrode can influence its gas bubbles release behavior, thereby impacting its water electrolysis performance significantly. However, the relationship between the wire mesh structure, gas bubble behavior on wire mesh, and water electrolysis performance of wire mesh is still unclear. In this study, four types of Ni wire mesh electrodes with varying mesh numbers (20 mesh, 40 mesh, 100 mesh, and 200 mesh) were employed as cathodes in a zero-gap electrolytic cell to investigate the relationship between wire mesh structure, behavior of hydrogen bubble detachment from wire mesh, and hydrogen evolution reaction (HER) performance of wire mesh. At a high current density (i<inf>ECSA</inf> = 800 mA/cm2) in 1 M KOH aqueous solution, hydrogen bubbles detach in a higher rate and smaller size from the Ni wire mesh with higher mesh number. In this case, the HER overpotential decreases in the order of 20 mesh >40 mesh >100 mesh >200 mesh, because the higher detachment rate and smaller detachment size of hydrogen bubbles can cause a greater catalytic active sites exposure of Ni wire mesh electrode and lead to a lower HER overpotential. To simulate the operating condition of industrial electrolyzers, a 4 M KOH aqueous solution was also utilized as the electrolyte to explore the aforementioned relationship. Under i<inf>ECSA</inf> = 800 mA/cm2, the average sizes of hydrogen bubbles detachment from four types of wire mesh electrodes increased to varying degrees comparing with that observed in 1 M KOH aqueous solution. These findings indicate that operating conditions of the electrolysis system may influence the relationship between HER performance of wire mesh and wire mesh structure by altering the behavior of hydrogen bubble on wire mesh. Our study highlighted the importance of evaluating the characteristics of bubble on wire mesh during water electrolysis in order to determine the wire mesh structure with optimum performance.

DOI： 10.1016/j.ijhydene.2025.03.267

Web of Science

Scopus
Lowering the Boiling Initiation Point of Refrigerants on Aluminum Surfaces Via Formation of Porous Type Anodic Oxide with Re-Entrant Structures

NAKAJIMA Daiki, KUROTANI Shohei, SHEN Biao, BEKKI Yoichiro, MORI Shoji, TAKATA Yasuyuki

Journal of The Surface Finishing Society of Japan 76 ( 1 ) 50 - 53 2025.1 （ ISSN:09151869 eISSN:18843409 ）

　More details

Language：Japanese Publisher：The Surface Finishing Society of Japan

Porous-type anodic oxide with re-entrant structures formed by two distinct anodizing processes suppressed the delay of boiling initiation. Even after long-term boiling, the nanostructured oxide surface maintained its structure. Moreover, the boiling cooling performance of hydrofluoroether-7100 was equal to that before the test.

DOI： 10.4139/sfj.76.50

CiNii Research
Techno-economic analysis of a steam supply heat pump system (Potential for cost reduction through adoption of refrigerants with high critical temperatures and removal of a steam compressor)

KAIDA Takenobu, ANDERSEN Martin Pihl, MORI Shoji

Transactions of the JSME (in Japanese) 91 ( 943 ) 25-00004 - 25-00004 2025 （ eISSN:21879761 ）

　More details

Language：Japanese Publisher：The Japan Society of Mechanical Engineers

High-temperature heat pumps represent a pivotal technology in the pursuit of decarbonizing industrial process heating with the utmost efficiency. Steam serves as the energy carrier for many industrial systems, making steam supply heat pumps as a promising approach for efficient decarbonization. An existing heat pump-based steam supply system with a supply steam temperature of 135°C or higher consists of the following 3 units; a heat pump unit with the mixture of R245fa and R134a, a flash tank unit, and a steam compressor unit. However, recent developments in refrigerants for higher applications have increased the technology options for the system configuration of steam supply heat pump. Specifically, it will be possible to supply steam at a level of 150°C, which could not be achieved with conventional refrigerants such as R245fa and R134a due to the critical temperature constraints. In this paper, a thermal and economic model for a steam supply heat pump system is developed based on the test results with the existing system. The model is applied to analyze the change in COP (coefficient of performance) and LCOH (levelized cost of heat) when changing to new refrigerants under the condition of 150°C steam supply. As a result, we clarify the couple of changing the refrigerant form the conventional R245fa to R1336mzz(Z) or R601 and removing the steam compressor can improve the COP and also reduce the LCOH.

DOI： 10.1299/transjsme.25-00004

CiNii Research
Mechanism of the rapid generation of superheated and saturated steam using a water-containing porous material Reviewed

1. Wang Bicheng,　Yutaro Umehara,Mikako Tanaka,Ryo Kobayashi,Soichiro Hida,Atsuro Eto,Shoji Mori

Applied Thermal Engineering 257 124172 2024.8

　More details

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.applthermaleng.2024.124172
Topological and multi-objective optimization of single-phase heat transfer and energy efficiency using manifold micro-channels for high-power electrics cooling Reviewed International journal

Jie Song, Xin Li, Shuai Feng, Chenguang Lai, Shoji Mori, Yong Chen, Lijuan Fu

International Journal of Heat and Mass Transfer 228 2024.8

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.ijheatmasstransfer.2024.125640
Experimental study on the upward annular two-phase flow of nitrogen and ethanol aqueous solutions with different concentrations Reviewed International journal

Huacheng Zhang, Yutaro Umehara, Shoji Mori

International Journal of Heat and Mass Transfer 228 125610 2024.8

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1016/j.ijheatmasstransfer.2024.125610
Multi-objective optimization on thermal performance and energy efficiency for battery module using gradient distributed Tesla cold plate Reviewed International journal

Shuai Feng, Shumin Shan, Chenguang Lai*, Jun Chen, Xin Li, Shoji Mori

Energy Conversion and Management 2024.5

　More details

Language：English Publishing type：Research paper (scientific journal)
Critical Heat Flux Improvement by Controlling Honeycomb Structure of Electrodeposited Porous Plate in a Saturated Pool Boiling of Water

HAYASHIDA Yuya, UMEHARA Yutaro, OTSUKA Ryo, ETOH Atsuro, MORI Shoji

The Proceedings of the National Symposium on Power and Energy Systems 2024.28 ( 0 ) A143 2024 （ eISSN:24242950 ）

　More details

Language：Japanese Publisher：The Japan Society of Mechanical Engineers

Recently, the use of boiling cooling has been considered for emergency cooling in nuclear power plants and for cooling of large power devices. We fabricated electrodeposited porous plates with micro-scale honeycomb porous structure and improved the critical heat flux by using them. The structures of the porous plates were modified significantly by changing the electrodeposition conditions. The experimental results showed that the difference in the porous structure greatly affected to the critical heat flux. As for the relationship between the existence ratio of macro-channels and the critical heat flux, the critical heat flux was higher when there were few macro-channels than when the percentage of macro-channels were very high. It is thought that this tendency was obtained due to the role of porous part in retaining the liquid in boiling. In addition, the critical heat flux improved as the Wickability was increased. Therefore, the wicking performance of the porous plates is considered to have greatly improved the critical heat flux.

DOI： 10.1299/jsmepes.2024.28.a143

CiNii Research
The effect of electrodeposited porous plate on the CHF in saturated pool boiling of water

HAYASHIDA Yuya, UMEHARA Yutaro, ETOH Atsuro, MORI Shoji

Transactions of the JSME (in Japanese) 90 ( 935 ) 24-00061 - 24-00061 2024 （ eISSN:21879761 ）

　More details

Language：Japanese Publisher：The Japan Society of Mechanical Engineers

Since boiling is a phenomenon with high heat transfer performance, it is expected to be used in various industrial fields such as emergency cooling in nuclear power plants, power device cooling for EVs and next-generation CPU cooling in data centers. So far, various research on boiling have been carried out in the background of these trends. In particular, many studies have been conducted to improve the critical heat flux (qCHF) which is the limit of boiling heat transfer. However, since the mechanism of qCHF is a complex phenomenon, the methods of qCHF improvement are still unconstructed. Here we demonstrate the high-performance heat transfer surface using electrodeposition which fabricates copper porous plate. We found that this copper porous plate has higher qCHF (3.7 MW/m2) than the plain surface (1.3 MW/m2) in saturated pool boiling of water at atmospheric pressure. The structure of copper porous plates is investigated by X-ray CT and SEM. The copper porous plates have a honeycomb porous structure consisting of porous area and vapor escape channels extending vertically from the substrate. In addition, the diameter of the vapor escape channels increases from the substrate to the top surface. This surface structure can supply the coolant to the heat transfer surface with the reduction of pressure drop. Our results show that the mechanism of qCHF improvement using porous plate depends on the wicking phenomenon and structure. We expect that these results will help in the development of high-performance heat transfer surfaces for various industrial applications.

DOI： 10.1299/transjsme.24-00061

CiNii Research
Techno-Economic Analysis of Steam Supply Heat Pumps

KAIDA Takenobu, Pihl Martin Pihl, MORI Shoji

The Proceedings of the National Symposium on Power and Energy Systems 2024.28 ( 0 ) A211 2024 （ eISSN:24242950 ）

　More details

Language：Japanese Publisher：The Japan Society of Mechanical Engineers

High-temperature heat pumps represent a pivotal technology in the pursuit of decarbonizing industrial process heating with the utmost efficiency. Steam serves as the energy carrier for many industrial systems, making steam supply heat pumps a promising approach for efficient decarbonization. In this paper, a thermodynamic and economic model of a heat pump system is developed based on the test results with a heat pump supplying steam up to 175°C. The model is used to analyze the change in COP (coefficient of performance) and LCOH (levelized cost of heat) when changing to new refrigerants.

DOI： 10.1299/jsmepes.2024.28.a211

CiNii Research
Prediction of interfacial shear stress and pressure drop in vertical two-phase annular flow Invited Reviewed International journal

Huacheng Zhang#, Yutaro Umehara@, Hiroyuki Yoshida, Shoji Mori@

International Journal of Heat and Mass Transfer 218 (2024) ( 124750. ) 2023.9

　More details

Language：English Publishing type：Research paper (scientific journal)
On the velocity and frequency of disturbance waves in vertical annular flow with different surface tension and gas–liquid density ratio Reviewed International journal

Huacheng Zhang, Yutaro Umehara, Hiroyuki Yoshida, and Shoji Mori

International Journal of Heat and Mass Transfer 211 ( 124253 ) 2023.9

　More details

Language：Japanese Publishing type：Research paper (scientific journal)
高温ヒートポンプサイクルの冷媒選択に関する熱力学的考察 Invited Reviewed

甲斐田　武延、森　昌司@

冷凍空調学会論文誌 40 ( 3 ) 149 - 161 2023.9

　More details

Language：Japanese Publishing type：Research paper (scientific journal)
Improvement in the onset of the nucleate pool boiling of HFE-7100 with the use of a honeycomb porous plate and heated fine wire Invited Reviewed International journal

Feifei Wu#, Tsutomu Hisano#, Yutaro Umehara@, Yasuyuki Takata@, Shoji Mori@

International Journal of Heat and Mass Transfer 217 124738 2023.9

　More details

Language：English Publishing type：Research paper (scientific journal)
Improvement of the critical current density of alkaline water electrolysis based on the hydrodynamic similarity between boiling and water electrolysis Invited Reviewed International journal

Xuesong We,Takumi Kakimoto,Yutaro Umehara, Hironori Nakajima, Kohei Ito, Hiromitsu Inagaki, Shoji Mori

International Journal of Heat and Mass Transfer 214 ( 124420 ) 2023.6

　More details

Language：English Publishing type：Research paper (scientific journal)
Effect of gas density and surface tension on liquid film thickness in vertical upward disturbance wave flow Reviewed International journal

Huacheng Zhang, Shoji Mori,Tutomu Hisano, Hiroyuki Yoshida

International Journal of Multiphase Flow 2023.1

　More details

Language：English Publishing type：Research paper (scientific journal)
Improvement of Heat Transfer Performance for Boiling and Evaporation Using Porous Materials

MORI Shoji

Bulletin of the Society of Sea Water Science, Japan 77 ( 1 ) 2 - 6 2023 （ ISSN:03694550 eISSN:21859213 ）

　More details

Language：Japanese Publisher：The Society of Sea Water Science, Japan

DOI： 10.11457/swsj.77.1_2

CiNii Research
Rapid generation of ethanol vapor using liquid-containing porous media

BICHENG WANG, YAN FU, UMEHARA Yutaro, MORI Shoji

The Proceedings of the National Symposium on Power and Energy Systems 2023.27 ( 0 ) B122 2023 （ eISSN:24242950 ）

　More details

Language：Japanese Publisher：The Japan Society of Mechanical Engineers

To promote the "Basic Hydrogen Strategy" first formulated by Japan [1], hydrogen storage technology based on toluene and methylcyclohexane (MCH) reversible reaction has received widespread attention due to its convenience in hydrogen transport. Superheated vaporization is a necessary process for the catalytic dehydrogenation of MCH, and a novel method with a simple structure to generate superheated water steam quickly and efficiently have been proved in our previous study. However, the start-up response and efficiency of this porous media steam generator has not yet been clarified while using organic fluid. As MCH is toxic to human body, ethanol, which has similar physical properties to MCH, was used in our experiment. Compared to the water, ethanol with lower latent heat has better performance in generating superheated vapor rapidly and efficiently, which also proves that the proposed vapor generator is suitable for the MCH reaction. Considering both heat transfer and fluid flow in the porous media, the energy utilization efficiency and surface temperature were analyzed using one-dimensional models.

DOI： 10.1299/jsmepes.2023.27.b122

CiNii Research
Effect of Micro Honeycomb Porous Plate on the Critical Heat Flux in Saturated Pool Boiling

HAYASHIDA Yuya, YATSUNAMI Syun, MORI Shoji

The Proceedings of Mechanical Engineering Congress, Japan 2022 ( 0 ) S081p-02 2022 （ eISSN:24242667 ）

　More details

Language：Japanese Publisher：The Japan Society of Mechanical Engineers

Enhancement of the critical heat flux in pool boiling by the attachment of a micro HPP on a heated surface is investigated experimentally using water under saturated boiling conditions. HPP enhance the CHF from the capillary supply of liquid onto the heated surface through the pores and the release of vapor generated through the channels. When the height of the micro HPP on the heated surface is 1.4 mm, the CHF increases to 2.5 MW/m2. While the CHF began to decrease when the thickness was more than1.4 mm. In regions of thin HPP thickness, the CHF can be explained by the Haramura-Katto model. Therefore, in this presentation we examined the CHF mechanism in the thicker HPP region using the capillary limit model.

DOI： 10.1299/jsmemecj.2022.s081p-02

CiNii Research
Cooling performance enhancement using a porous material

MORI Shoji

CERAMICS JAPAN 57 ( 5 ) 321 - 324 2022 （ ISSN:0009031X ）

　More details

Language：Japanese Publisher：日本セラミックス協会

1．はじめに / 2．多孔質体を用いた限界熱流束の向上 / 3．多孔質体を用いた熱伝達率向上 / 4．多孔体を用いたその他の機器の高性能化 / 5．まとめ

CiNii Research
Effect of Fluid Properties on a Rapid Super-heated Vaporization Process Using Water Containing Porous Material

Fu Yan, Umehara Yutaro, Mori Shoji

The Proceedings of the Thermal Engineering Conference 2022 ( 0 ) 59 2022 （ eISSN:2424290X ）

　More details

Language：Japanese Publisher：The Japan Society of Mechanical Engineers

Superheated vapor is used in several industrial fields including sterilization, desiccation, and dehydrogenating. MCH (methylcyclohexane) has been vastly utilized as hydrogen carrier under several advantages. Superheated vaporization is necessary for catalytically dehydrogenating MCH. Current superheated vapor generation methods including high-frequency induction heating and microwave heating are difficult to obtain rapid generation and shutdown responses due to the large heat capacity of the fluid in the tank and the heater. For the realization of a carbon-free society and a hydrogen-based society, we proposed a method to generate superheated vapor using porous material with rapid response and high efficiency. Vapor may be generated rapidly from the surface of porous material due to small heat capacity of liquid in the meniscus. The main objective of the present research was to experimentally investigate the performance of the vapor generator using different working fluid with different property. As a result, fluid with low latent heat had better performance in generating superheated vapor rapidly and efficiently. Considering both heat conduction and fluid advection in porous material, the energy utilization efficiency and surface temperature were analyzed by a simplified one-dimensional model. The calculated results were shown to be in good agreement with the experimental results. The proposed vapor generator is suitable for superheated vaporization in MCH method from the analysis of the model.

DOI： 10.1299/jsmeted.2022.59

CiNii Research
Effect of material arrangement pattern on different-mode-interacting boiling in narrow gaps with two liquid supply systems Reviewed

T. Xie, Y. Utaka, Z. Chen, T. Hirotani, S. Mori

Applied Thermal Engineering Volume 191, 5 June 2021, 116893 2021.6

　More details

Language：English Publishing type：Research paper (scientific journal)
Effect of honeycomb porous plate on critical heat flux in a Saturated pool boiling of highly concentrated artificial seawater Reviewed International journal

Wilton Fogaça, Shoji Mori

Physics of Fluids 32 ( 5 ) 2020.5

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1063 / 1.5144438
Measurement of the microlayer characteristics in the whole range of nucleate boiling for water by laser interferometry Reviewed

Zhihao Chen, Xiaocheng Hu, Kang Hu, Yoshio Utaka, Shoji Mori

International Journal of Heat and Mass Transfer 146 2020.1

　More details

Language：English Publishing type：Research paper (scientific journal)
Effect of heating surface size on critical heat flux in different-mode-interacting boiling inside narrow gaps for water Reviewed

Tianxi Xie, Yoshio Utaka, Zhihao Chen, Shoji Mori

International Journal of Heat and Mass Transfer 143 2019.11

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2019.118543
Measurement of a Heated Surface Temperature Using a High-Speed Infrared Camera During Critical Heat Flux Enhancement by a Honeycomb Porous Plate in a Saturated Pool Boiling of a Nanofluid Reviewed

Shoji Mori　et al.

Heat Transfer Engineering 2019.1

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1080/01457632.2019.1628487
On the quenching of stainless steel rods with a honeycomb porous plate on a nanoparticle deposited surface in saturated water Reviewed

Fumihisa Yokomatsu, Wilton Fogaça, Shoji Mori, Mikako Tanaka

International Journal of Heat and Mass Transfer 127 507 - 514 2018.12

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2018.07.009
Enhancement of critical heat flux using spherical porous bodies in saturated pool boiling of nanofluid Reviewed

Shoji Mori, Fumihisa Yokomatsu, Yoshio Utaka

Applied Thermal Engineering 144 219 - 230 2018.11

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.applthermaleng.2018.08.047
Effect of honeycomb porous plate on critical heat flux in saturated pool boiling of artificial seawater Reviewed

Wilton Fogaça et al.

International Journal of Heat and Mass Transfer 125 994 - 1002 2018.10

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2018.04.101
含水多孔質体を用いた迅速過熱水蒸気発生器の開発 Reviewed

森　昌司田中美香子

ボイラ研究 Vol.411 ( Issue 15-16 (2019) 1-17. ) 2018.10

　More details

Language：Japanese Publishing type：Research paper (scientific journal)
二層構造ハニカム多孔質体による流動沸騰限界熱流束の向上 Reviewed

牟田明広他

日本冷凍空調学会論文集 35 ( 2 ) 93 - 99 2018.10

　More details

Language：Japanese Publishing type：Research paper (scientific journal)
Critical heat flux enhancement by a two-layer structured honeycomb porous plate in a saturated pool boiling of water Reviewed

Shoji Mori et al.

International Journal of Heat and Mass Transfer 118 429 - 438 2018.3

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2017.10.100
Rapid cooling of a high-temperature block by the attachment of a honeycomb porous plate on a nanoparticle-deposited surface Reviewed

Shoji Mori et al.

Applied Thermal Engineering 133 576 - 579 2018.3

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.applthermaleng.2018.01.088
CHF enhancement of a large heated surface by a honeycomb porous plate and a gridded metal structure in a saturated pool boiling of nanofluid Reviewed

Suazlan Mt Aznam et al.

International Journal of Heat and Mass Transfer 115 969 - 980 2017.1

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2017.07.089
Critical heat flux enhancement by surface modification in a saturated pool boiling A review Reviewed

Shoji Mori, Yoshio Utaka

International Journal of Heat and Mass Transfer 108 2534 - 2557 2017.1

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2017.01.090
Effects of heater orientation on critical heat flux for nanoparticle-deposited surface with honeycomb porous plate attachment in saturated pool boiling of water Reviewed

Suazlan Mt Aznam, et al.

International Journal of Heat and Mass Transfer 102 1345 - 1355 2016.11

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2016.07.004
ハニカム多孔質体を用いたプール沸騰限界熱流束向上に与える毛管効果の影響 Reviewed

丸岡成他

日本機械学会論文集 82 巻 ( 840 号 ) p. 16 2016.8

　More details

Language：Japanese Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1299/transjsme.16-00106
CHF enhancement by honeycomb porous plate in saturated pool boiling of nanofluid Reviewed

Shoji Mori et al.

journal of nuclear science and technology 53 ( 7 ) 1028 - 1035 2016.7

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1080/00223131.2015.1087353
Novel process for the rapid and efficient generation of superheated steam using a water-containing porous material Reviewed

Shoji Mori et al.

International Journal of Heat and Mass Transfer 93 1159 - 1168 2016.2

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2015.11.021
Enhancement of the critical heat flux in saturated pool boiling of water by nanoparticle-coating and a honeycomb porous plate Reviewed

Shoji Mori et al.

International Journal of Heat and Mass Transfer 80 1 - 6 2015.1

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijheatmasstransfer.2014.08.046
ハニカム多孔質体上部に形成される合体大気泡が飽和プール沸騰限界熱流束に与える影響 Reviewed

丸岡成　他

混相流　Japanese journal of multiphase flow 27・28巻 ( 5・1号 ) 631 - 638 2014.3

　More details

Language：Japanese Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.1299/transjsme.14-00292
含水多孔質体を用いた過熱水蒸気の急速生成過程の検討 Reviewed

森昌司　他

混相流 26 巻 ( 5 号 ) p. 531 - 536 2013.3

　More details

Language：Japanese Publishing type：Research paper (scientific journal)

DOI： https://doi.org/10.3811/jjmf.26.531
Calorimetric measurement of water transport and intracellular ice formation during freezing in cell suspensions Reviewed

Shoji Mori, Jeunghwan Choi, Ram V. Devireddy, John C. Bischof

Cryobiology 65 ( 3 ) 242 - 255 2012.12

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.cryobiol.2012.06.010
Spectroscopic and calorimetric evaluation of chemically induced protein denaturation in HuH-7 liver cancer cells and impact on cell survival Reviewed

Rajagopal N. Aravalli, Jeunghwan Choi, Shoji Mori, Dushyant Mehra, Jinping Dong, John C. Bischof, Erik N.K. Cressman

Technology in Cancer Research and Treatment 11 ( 5 ) 467 - 473 2012.10

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.7785/tcrt.2012.500271
The effect of the gas-liquid density ratio on the liquid film thickness in vertical upward annular flow Reviewed

Shoji Mori et al.

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 76 ( 772 ) 2168 - 2177 2010.12

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1299/kikaib.76.772_2168
Effect of the cell size of a honeycomb porous plate attached to heated surface on the CHF in saturated pool boiling Reviewed

Shoji Mori et al.

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 76 ( 771 ) 1908 - 1916 2010.11

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1299/kikaib.76.771_1908
Enhancement of the critical heat flux in saturated pool boiling using honeycomb porous media Reviewed

Shoji Mori et al.

International Journal of Multiphase Flow 35 ( 10 ) 946 - 951 2009.10

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.ijmultiphaseflow.2009.05.003
Enhancement of the critical heat flux in saturated pool boiling using honeycomb porous media Reviewed

Shoji Mori et al.

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 75 ( 758 ) 1896 - 1902 2009.1

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1299/kikaib.75.758_1896
On the occurrence of burnout downstream of a flow obstacle in boiling two-phase upward flow within a vertical annular channel Reviewed

Shoji Mori, Akira Tominaga, Tohru Fukano

Nuclear Engineering and Design 237 ( 23 ) 2240 - 2249 2007.12

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.nucengdes.2007.03.044
含水多孔質を用いた過熱水蒸気の急速生成 Reviewed International journal

森昌司他

Thermal Science and Engineering Vol. 15 ( No.1 ) 39 - 42 2007.1

　More details

Language：Japanese Publishing type：Research paper (scientific journal)
Characteristics of the disturbance wave and the base film in vertical upward boiling annular flow Reviewed

Shoji Mori, Daisuke Matsushita, Tohru Fukano

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 72 ( 11 ) 2723 - 2732 2006.11

　More details

Language：English Publishing type：Research paper (scientific journal)
Relation between the occurrence of Burnout and differential pressure fluctuation characteristics caused by the disturbance waves passing by a flow obstacle in a vertical boiling two-phase upward flow in a narrow annular channel Reviewed

Shoji Mori, Tohru Fukano

Nuclear Engineering and Design 236 ( 9 ) 985 - 992 2006.5

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/j.nucengdes.2005.09.005
On the occurrence of burnout downstream of a flow obstacle in boiling two-phase upward flow within a vertical annular channel Reviewed

Shoji Mori, Akira Tominaga, Tohru Fukano

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 70 ( 689 ) 159 - 167 2004.1

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1299/kikaib.70.159
Influence of a flow obstacle on the occurrence of burnout in boiling two-phase upward flow within a vertical annular channel Reviewed

S. Mori, T. Fukano

Nuclear Engineering and Design 225 ( 1 ) 49 - 63 2003.10

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/S0029-5493(03)00136-5
Relation between the occurrence of burnout and differential-pressure fluctuation characteristics caused by the disturbance waves passing by a flow obstacle in a vertical boiling two-phase upward flow in a narrow annular channel Reviewed

Shoji Mori, Tohru Fukano

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 69 ( 680 ) 909 - 917 2003.4

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1299/kikaib.69.909
Fluctuation characteristics of heating surface temperature near an obstacle in transient boiling two-phase flow in a vertical annular channel Reviewed

T. Fukano, Shoji Mori, T. Nakagawa

Nuclear Engineering and Design 219 ( 1 ) 47 - 60 2003.1

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/S0029-5493(02)00214-5
Relation between temperature fluctuation of a heating surface and generation of drypatch caused by a cylindrical spacer in a vertical boiling two-phase upward flow in a narrow annular channel Reviewed

T. Fukano, Shoji Mori, S. Akamatsu, A. Baba

Nuclear Engineering and Design 217 ( 1-2 ) 81 - 90 2002.8

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1016/S0029-5493(02)00159-0
Influence of a flow obstacle on the generation of burnout in boiling two-phase upward flow within a vertical annular channel Reviewed

Shoji Mori, Tohru Fukano, Kentaro Maeda

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 68 ( 666 ) 527 - 535 2002.2

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1299/kikaib.68.527
Fluctuation characteristics of heating surface temperature near the obstacle in transient boiling two-phase flow in a vertical annular channel Reviewed

Shoji Mori, Tohru Fukano, Tetsuro Nakagawa

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 67 ( 661 ) 2281 - 2287 2001.9

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1299/kikaib.67.2281
Relation between temperature fluctuation of a heating surface and generation of drypatch caused by a spacer in a vertical boiling two-phase flow in a narrow annular channel Reviewed

Tohru Fukano, Shizu Akamatsu, Atsushi Baba, Takashi Okusako, Shoji Mori

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B 66 ( 650 ) 2704 - 2711 2000.10

　More details

Language：English Publishing type：Research paper (scientific journal)

DOI： 10.1299/kikaib.66.650_2704

▼display all

Books

マイクロ・ナノ熱工学の進展

丸山　茂夫他（Role：Joint author）

(株)エヌ・ティー・エス 2021.5

　More details

Language：Japanese
Fundamentals of Thermal and Nuclear Power Generation

Yasuo Koizumi, Tomio Okawa, Shoji Mori（Role：Joint author）

Elsevier 2021.2

　More details

Responsible for pages：ISBN 978-0-12-820733-8 Language：English
Boiling: Research and Advances

Y. Koizumi, M. Shoji, M. Monde, Y. Takata, N. Nagai

Elsevier 2017.7

　More details

Responsible for pages：3.4 Critical heat flux enhancement in saturated pool boiling Language：English

Presentations

じょう乱波を含む環状流の数値シミュレーション International conference

堀口直樹、吉田啓之、Huacheng Zhang（九州大学）、森昌司（九州大学）

日本原子力学会2024年春の年会 2024.3

　More details

Event date： 2024.4

Language：Japanese Presentation type：Oral presentation (general)

Venue：近畿大学東大阪キャンパス Country：Japan
Stable Onset of Nucleate Boiling of Ethanol on Two-tiered Porous Surfaces

Biao SHEN , Shohei KUROTANI , Sumitomo HIDAKA, Shoji MORI, Yasuyuki TAKATA , Daiki NAKAJIMA, , Yoichiro BETSUKI

第56回空気調和・冷凍連合講演会 2023.3

　More details

Event date： 2024.4

Language：Japanese Presentation type：Oral presentation (general)

Venue：東京海洋大学 Country：Japan
着泡リボン加熱線によるAE-3000の沸騰開始過熱度の低減, 第60回日本伝熱シンポジウム

呉菲菲, 久野努, 梅原裕太郎, 高田保之, 森昌司 (九州大)

第60回日本伝熱シンポジウム 2023.5

　More details

Event date： 2024.4

Language：Japanese Presentation type：Oral presentation (general)

Country：Japan
HFC134aガス・エタノール系の鉛直環状流におけるじょう乱波特性

Zhang Huacheng, 梅原裕太郎 (九州大), 吉田啓之 (JAEA), 森昌司 (九州大)

第60回日本伝熱シンポジウム 2023.5

　More details

Event date： 2024.4

Language：Japanese Presentation type：Oral presentation (general)

Country：Japan
Critical Heat Flux Improvement Using Metal Honeycomb Porous Plate Formed by Electrolytic Deposition in a Saturated Pool Boiling International conference

#Yuya Hayashida, @Yutaro Umehara, @Shoji Mori

30th International Conference on Nuclear Engineering 2023.5

　More details

Event date： 2024.4

Language：English Presentation type：Oral presentation (general)

Venue：Kyoto, Japan Country：Japan
環状流中の液膜流動特性に与えるエタノール水溶液濃度の影響

Zhang Huacheng（九大），梅原裕太郎（九大），吉田啓之（JAEA），森昌司（九大）

日本混相流学会混相流シンポジウム2023 2023.8

　More details

Event date： 2024.4

Language：Japanese Presentation type：Oral presentation (general)

Venue：北海道大学 Country：Japan
LIQUID FILM CHARACTERISTICS IN VERTICAL ANNULAR FLOW OF HFC134A GAS AND ETHANOL AQUEOUS SOLUTION International conference

#Huacheng Zhang, #Tutomu Hisano, @Yutaro Umehara, @Hiroyuki Yoshida , @Shoji Mori

The 17th International Heat Transfer Conference 2023.8

　More details

Event date： 2024.4

Language：English Presentation type：Oral presentation (general)

Venue：Cape Town, South Africa Country：Japan
DECREASE IN THE ONB OF HFE-7100 USING A POROUS PLATE WITH A HEATED FINE WIRE International conference

#Feifei Wu, #Hisano Tsutomu, @Umehara Yutaro, @Shoji Mori

The 17th International Heat Transfer Conference 2023.8

　More details

Event date： 2024.4

Language：English Presentation type：Oral presentation (general)

Country：Japan
多孔質体を利用したエタノール蒸気の急速生成

WANG BICHENG(九大), FU YAN, 梅原裕太郎, 森昌司

第27 回動力・エネルギー技術シンポジウム 2023.9

　More details

Event date： 2024.4

Language：Japanese Presentation type：Oral presentation (general)

Venue：東京海洋大学 Country：Japan
Ni金網電極のメッシュ数がアルカリ水電解電極性能に及ぼす影響～気泡離脱挙動の観察からの考察～

韋雪淞、梅原裕太郎、江藤淳朗、中島裕典、伊藤衡平、森昌司（九州大学）

第43回水素エネルギー協会（HESS）大会 2023.12

　More details

Event date： 2024.4

Language：Japanese Presentation type：Oral presentation (general)

Venue：タワーホール船堀 Country：Japan
Improvement on the Onset of Nucleate Pool Boiling of HFE-7100 using the Porous Material and Heated Fine Wire International conference

#Wu Feifei Tsutomu #Hisano, @Yutaro Umehara @Yasuyuki Takata @Shoji Mori,

11th Int. Conf. Boiling Condensation Heat Transfer 2023（ICBCHT2023） 2023.5

　More details

Event date： 2023.5

Language：English

Venue：Edinburgh Country：United Kingdom
Liquid film thickness measurement in vertical annular flow changing the gas density and surface tension of working fluid International conference

#Huacheng Zhang @Shoji Mori　#Hisano Tutomo @Hiroyuki YOSHIDA (JAEA)

11th International Conference on Multiphase Flow （ICMF 2023） 2023.4

　More details

Event date： 2023.4

Language：English

Venue：Kobe, Japan Country：Japan
Liquid nitrogen quenching of copper surface with porous structure International conference

@Yutaro Umehara　#Rintaro Sadaishi @Shoji Mori

11th International Conference on Multiphase Flow2023（ICMF 2023） 2023.4

　More details

Event date： 2023.4

Language：English

Venue：Kobe, Japan Country：Japan
The effect of a honey-comb porous plate on the critical heat flux under reduced pressure conditions International conference

Feifei Wu, Shoji Mori,

29th International Conference on Nuclear Engineering 2022.8

　More details

Event date： 2022.8

Language：English Presentation type：Oral presentation (general)

Venue：Online Country：Japan
CHF ENHANCEMENT OF SATURATED POOL BOILING USING COPPER POROUS BODY FORMED BY THE ELECTRODEPOSITION METHOD International conference

S. YATSUNAMI, S. MORI, T. XIE, Y. UTAKA, Z. CHEN

The 32nd International Symposium on Transport Phenomena 2022.3

　More details

Event date： 2022.3

Language：English Presentation type：Oral presentation (general)

Venue：Online Country：Japan
ENHANCEMENT OF FILM BOILING HEAT TRANSFER International conference

2. Shoji Mori, Kanta Nakajima, Kaito Kuga

the Second Asian Conference on Thermal Sciences 2021.10

　More details

Event date： 2021.10

Language：English Presentation type：Oral presentation (general)

Venue：Online Country：Japan
Film Thickness Measurement in a Vertical Two-Phase Flow Composed of HFC134a gas and Ethanol liquid International conference

Shoji Mori, Hiroyuki Yoshida

The Second Pacific Rim Thermal Engineering Conference 2019.12

　More details

Event date： 2019.12

Language：English Presentation type：Oral presentation (general)

Venue：Maui, Hawaii, USA Country：United States
Saturated pool boiling of highly concentrated artificial seawater with a honeycomb porous plate and its effect on the critical heat flux International conference

Wilton Fogaça, Kokuse Imanishi, Shoji Mori

The 30th International Symposium on Transport Phenomena (ISTP30) 2019.11

　More details

Event date： 2019.11

Language：English

Country：Viet Nam
The effect of gas-liquid properties on height of disturbance waves in a vertical annular two-phase flow

S. Mori, Y. Tanaka, H. Yoshida

18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2019 2019.1

　More details

Event date： 2019.8

Language：English

Venue：Portland Country：United States
Pool boiling CHF enhancement using a honeycomb porous plate and nanofluid , 1st International Conference on Nanofluids (ICNf) and the 2nd European Symposium on Nanofluids (ESNf), 26th-28th June 2019, Universitat Jaume I. Castelló. Spain

Shoji Mori

1st International Conference on Nanofluids (ICNf) and the 2nd European Symposium on Nanofluids (ESNf) 2019.6

　More details

Event date： 2019.6

Language：English

Venue：Universitat Jaume I. Castelló. Country：Spain
Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater

Wilton Fogaça, Shoji Mori

27th International Conference on Nuclear Engineering: Nuclear Power Saves the World!, ICONE 2019 2019.5

　More details

Event date： 2019.5

Language：English

Venue：Tsukuba, Ibaraki Country：Japan
Critical heat flux enhancement of large heated surface by the use of a honeycomb porous plate in a saturated pool boiling of water

Shoji Mori

The 7th International Symposium on Micro and Nano Technology 2019.4

　More details

Event date： 2019.4

Language：English

Venue：Qingdao Country：China
CHF enhancement by the combination of a honeycomb porous plate and nanofluid in a saturated pool boiling

Shoji Mori, Suazlan Mt Aznam, Ryuta Yanagisawa

Micro and Nanoscale Phase Change Heat Transfer,Gordon Research Conference (The Effects of Hydrodynamic, Interfacial and Intermolecular Forces on Phase Change Processes) 2019.2

　More details

Event date： 2019.2

Language：English Presentation type：Symposium, workshop panel (public)

Country：Italy
Enhancement of critical heat flux in saturated pool boiling of artificial seawater by a Honeycomb Porous Plate

Wilton Fogaça, Shoji Mori, Kousuke Imanishi, Kunito Okuyama, J.R.C. Piqueira

11th Korea-Japan Symposium on Nuclear Thermal-Hydraulics And Safety (NTHAS-11) 2018.11

　More details

Event date： 2018.11

Language：English

Country：Korea, Republic of
The effect of honeycomb porous plate on the CHF of downward facing heated surface in the flow boiling of water,

S. Mori, A. Muta, K. Okuyama

10th International Conference on Boiling and Condensation Heat Transfer 2018.3

　More details

Event date： 2018.3

Language：English

Country：Japan
On the onset of drying of a liquid-containing porous medium subjected to a high surface heat flux

K. Okuyama, S. Mori,

10th International Conference on Boiling and Condensation Heat Transfer 2018.3

　More details

Event date： 2018.3

Language：Japanese

Venue：Nagasaki Country：Japan
Effects of a honeycomb porous plate and a nanoparticledeposited surface on the rapid cooling ofa high-temperature stainless steel blockJapan International conference

S. Mori, F. Yokomatsu, M. Tanaka and K. Okuyama

The Ninth JSME-KSME Thermal and Fluids Engineering Conference 2017.10

　More details

Event date： 2017.10

Language：English

Venue：Okinawa Country：Japan
CHF enhancement using spherical porous materials in saturated pool boiling of nanofluid International conference

S. Mori, F. Yokomatsu and K. Okuyama

17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Xi’an 2017.9

　More details

Event date： 2017.9

Language：English

Venue：Shaanxi Country：China
CHF enhancement using spherical porous materials in saturated pool boiling of nanofluid

Shoji Mori, Fumihisa Yokomatsu, Kunito Okuyama

17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH 2017 2017.1

　More details

Event date： 2017.9

Language：English

Venue：Xi'an, Shaanxi Country：China
Improvement of structure in a honeycomb porous plate for pool boiling CHF enhancement

Naru Maruoka, Shoji Mori, Kunito Okuyama

2017 25th International Conference on Nuclear Engineering, ICONE 2017 2017.1

　More details

Event date： 2017.7

Language：English

Venue：Shanghai Country：China
On the quenching of copper blocks with honeycomb porous plate on the nanoparticle-deposited surface International conference

S. Mori, F. Yokomatsu, M. Tanaka and K. Okuyama

9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics 2017.6

　More details

Event date： 2017.6

Language：Japanese

Venue：Iguazu Falls Country：Brazil
Rapid generation mechanism of superheated steam using a water containing porous material International conference

S. Mori, M. Tanaka and K. Okuyama

2nd Thermal and Fluid Engineering Conference, TFEC2017, 4th International Workshop on Heat Transfer, IWHT2017 2017.4

　More details

Event date： 2017.4

Language：English

Venue：Las Vegas, NV Country：United States
Measurement of temperature distribution on heated surface with honeycomb porous plate in a saturated pool boiling of nanofluid International conference

S. Mori, R. Yanagisawa , A. M. Suazlan, and K. Okuyama

10th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety 2016.11

　More details

Event date： 2016.11

Language：English

Country：Japan
Liquid supply processes to heated surface for CHF enhancement using a honeycomb porous plate in a saturated pool boiling International conference

N. Maruoka, S. Mori, R. Imai, K. Okuyama

4th International Forum on Heat Transfer, IFHT2016 2016.11

　More details

Event date： 2016.11

Language：English

Country：Japan
CHF enhancement combining honeycomb porous plate and nanofluid in saturated pool boiling International conference

S. Mori, R. Yanagisawa, and K. Okuyama

IVth International Symposium on Innovative Materials for Processes in Energy Systems 2016.10

　More details

Event date： 2016.10

Language：English

Venue：Taormina, Sicily Country：Italy
Critical heat flux enhancement in water-based nanofluid with honeycomb porous plate on large heated surface

Suazlan Mt Aznam, Shoji Mori, Kunito Okuyama

2016 24th International Conference on Nuclear Engineering, ICONE 2016 2016.1

　More details

Event date： 2016.6

Language：English

Venue：Charlotte Country：United States
Measurement of liquid film thickness in two-phase HFC134a gas–liquid ethanol flow in vertical tube International conference

S. Mori, Y. Tanaka and K. Okuyama

9th International Conference on Multiphase Flow 2016.5

　More details

Event date： 2016.5

Language：English

Venue：Firenze Country：Italy
Liquid film thickness characteristics in HFC134a gas / ethanol liquid two phase flow International conference

S. Mori and Kunito Okuyama

17th International Conference on Thermal and Fluids Engineering 2015.11

　More details

Event date： 2015.11

Language：English

Venue：London Country：United Kingdom
CHF enhancement of pool boiling using a honeycomb porous plate with two‐layer structure International conference

S. Mori, N. Maruoka, and K. Okuyama

9th Minsk International Seminar “Heat Pipes, Heat Pumps, Refrigerators 2015.9

　More details

Event date： 2015.9

Language：English

Venue：Minsk Country：Belarus
Critical heat flux enhancement in saturated pool boiling using water-based nanofluid with honeycomb porous plate

Suazlan Mt Aznam, Shoji Mori, Yanagisawa Ryuta, Okuyama Kunito

23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy, ICONE 2015 2015.1

　More details

Event date： 2015.5

Language：English

Venue：Chiba Country：Japan
The Effect of Heater Orientation on the Critical Heat Flux in a Saturated Pool Boiling with Honeycomb Porous Plate on Nanoparticle Deposited Surface International conference

Suazlan Mt Aznam, S. Mori, K. Okuyama

10th International Topical Meeting on Nuclear Thermal Hydraulics, Operation and Safety (NUTHOS-10) 2014.12

　More details

Event date： 2014.12

Language：English

Venue：Okinawa Country：Japan
The effect of nanoparticle deposited surface, a honeycomb solid structure and a honeycomb porous plate on the critical heat flux in a saturated pool boiling International conference

Suazlan Mt Aznam, S.Mori, and K. Okuyama

9th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety Buyeo 2014.11

　More details

Event date： 2014.11

Language：English

Country：Korea, Republic of
Dynamics of evaporation in a single, straight-tube pulsating heat pipe

Kunito Okuyama, Takahiro Ichikawa, Shoji Mori

15th International Heat Transfer Conference, IHTC 2014 2014.1

　More details

Event date： 2014.8

Language：English

Venue：Kyoto Country：Japan
The CHF enhancement combining nano-fluid and honeycomb porous plate in a saturated pool boiling

Shoji Mori, Suazlan Mt Aznam, Kunito Okuyama

2014 22nd International Conference on Nuclear Engineering, ICONE 2014 2014.1

　More details

Event date： 2014.7

Language：English

Venue：Prague Country：Czech Republic
Rapid generation process of superheated steam using a water-containing porous material

Shoji Mori, Ryo Kobayashi, Mikako Tanaka, Kunito Okuyama

ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels, ICNMM 2012 Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012 2012.12

　More details

Event date： 2012.7

Language：English

Venue：Rio Grande Country：Puerto Rico
The effect of thermal conductivity of a porous material on a rapid generation of superheated steam using a water-containing porous material International conference

S. Mori, M. Kishi, R. Kobayashi, K. Okuyama and M. Tanaka

22nd International Symposium on Transport Phenomena 2011.11

　More details

Event date： 2011.11

Language：English

Venue：Delft Country：Netherlands
Importance of protein denaturation to thermochemical ablation of liver tumors

Shoji Mori, Rajagopal Aravalli, Jeunghwan Choi, Erik Cressman, John Bischof

ASME 2011 Summer Bioengineering Conference, SBC 2011 2011.12

　More details

Event date： 2011.6

Language：English

Venue：Farmington, PA Country：United States
Measurement of Intracellular Ice Formation and Water Transport During Freezing of Human Dermal Fibroblasts Using Differential Scanning Calorimetry International conference

S. Mori, Jeunghwan Choi, and John Bischof

ASME 2011 Summer Bioengineering Conference 2011.6

　More details

Event date： 2011.6

Language：Japanese

Venue：Farmington, Pennsylvania Country：United States
Scanning Fourier Transform Infra-Red and Differential Scanning Calorimetry Evaluation of the Impact　of Protein Denaturation on Survival After Urea and/or Ethanol Treatment of HuH-7 Liver Cancer International conference

Rajagopal Aravalli, Jeunghwan Choi, S. Mori, Dushyant Mehra, Jinping Dong, John Bischof, Erik Cressman1,

STM Annual Spring Conference 2011 2011.4

　More details

Event date： 2011.4

Language：English

Venue：Washington, DC Country：Japan
Effect of cell size of a honeycomb porous plate attached to A heated surface on CHF in saturated pool boiling, International conference

S. Mori, Lujie Shen and K. okuyama

14th ASME International Heat Transfer Conference 2010.8

　More details

Event date： 2010.8

Language：Japanese

Venue：Washington, DC Country：United States
Enhancement of critical heat flux in saturated pool boiling using honeycomb porous media International conference

S. Mori and K. Okuyama

US-Japan Seminar on Two-phase Flow Dynamics 2008.9

　More details

Event date： 2008.9

Language：English

Venue：Santa Monica Country：United States
Ejection of water droplets from a small nozzle by rapid boiling under two-stage high-pulse heating International conference

K. Okuyama, M. Ichikawa, K. Ichiishi, S. Mori

19th International Symposium on Transport 2008.8

　More details

Event date： 2008.8

Language：English

Country：Iceland
Measurement of superheat limit of binary liquid Mixtures by pulse heating method International conference

K. Okuyama, S. Sugiura, S. Kumawaki, K. Ikeda and S. Mori

8th Asian thrmophysical properties conference 2007.8

　More details

Event date： 2007.8

Language：English

Venue：Fukuoka Country：Japan
On The Dryout Of Thin Liquid Film Near A Flow Obstacle In Boiling Vertical Upward Flow International conference

S. Mori and T. Fukano ,

IHTC2006 2006.8

　More details

Event date： 2006.8

Language：English

Venue：Sydny Country：Australia
Pre-heating Effect on the Expansion of Boiling Bubble on a Small Film Heater High Pulse Powered International conference

K. Okuyama, J. Nakamura, S. Mori, and Y. Iida,

IHTC2006 2006.8

　More details

Event date： 2006.8

Language：English

Venue：Sydny Country：Australia
Burnout occurrence near a flow obstacle in boiling two-phase upward flow

S. Mori and T. Fukano

6th Japan-UK Mini-Seminar on Multiphase Flow 2005.9

　More details

Event date： 2005.9

Language：Japanese

Venue：Osaka Country：Japan
Detection Of Disturbance Waves By Differential-Pressure Fluctuation Characteristics And Its Relation To The Occurrence Of Burnout Near A Flow Obstacle In A Vertical Boiling Two-Phase Upward Flow In A Narrow Annular Channel International conference

S. Mori and T .Fukano,

6th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics 2005.4

　More details

Event date： 2005.4

Language：English

Venue：Matsushima, Miyagi Country：Japan
Influence of a flow obstacle simulating a spacer of a BWR on the occurrence of burnout in boiling two-phase flow International conference

S. Mori and T. Fukano

10th International Topical Meeting on Nuclear Reactor Thermal Hydraulics 2003.10

　More details

Event date： 2003.10

Language：English

Venue：Soul Country：Korea, Republic of
Heating surface temperature fluctuation characteristics near a flow obstruction simulating a spacer of a BWR in a transient boiling flow within a vertical annular channel International conference

T. Fukano and S. Mori

International Symposium on Transient Convective Heat and Mass Transfer in Single and Two-Phase Flows 2003.8

　More details

Event date： 2003.8

Language：English

Venue：Cesme Country：Turkey
Fluctuation Characteristics of Heating Surface Temperature Near an Obstacle in Transient Boiling Two-Phase Flow in a Vertical Annular Channel” International conference

T. Fukano and S. Mori

7th Workshop on Transport Phenomena in Two-Phase Flow 2002.9

　More details

Event date： 2002.9

Language：English

Venue：Varna Country：Bulgaria
Thermo-Fluids Problems near Flow Obstruction Simulating a Spacer of Nuclear Rods in Upward Boiling Flow within a Vertical Annular Channel. International conference

T. Fukano and S. Mori

Physical Principles of Experimental and Mathematical Simulation of Heat and Mass Transfer and Gas Dynamics in Power Plants 2001.5

　More details

Event date： 2001.5

Language：English

Venue：Saint-Petersburg Country：Russian Federation
Relation between Temperature Fluctuation of a Heating Surface and Generation of Drypatch caused by a spacer in a Vertical Boiling Two-phase flow in a narrow annular channel International conference

T. Fukano, S. Mori

US-Japan Joint Seminar on Two-phase Flow Dynamics 2000.6

　More details

Event date： 2000.6

Language：English

Venue：Santa Barbara Country：United States

▼display all

MISC

セラミック多孔体の最前線（前編）,多孔質体による熱機器の大幅な性能向上 Reviewed

森昌司

Ceramics Japan = セラミックス : bulletin of the Ceramic Society of Japan 2023.6

　More details

Language：Japanese

Repository Public URL： https://hdl.handle.net/2324/7173431
原子炉における機構論的限界熱流束評価技術の確立に向け　てPart 2：機構論的限界熱流束予測評価手法確立に向けた研究とその課題 Reviewed

日本原子力学会「原子炉における機構論的限界熱流束評価技術」研究専門委員会

日本原子力学会誌日本原子力学会誌 2021.12

　More details

Language：Japanese

DOI： https://doi.org/10.3327/jaesjb.63.12_820
ふぇらむ入門講座　伝熱工学　対流伝熱 Reviewed

森昌司

日本鉄鋼協会会報、ふぇらむ入門講座　Vol.27, No.3, 2022,pp126-pp133 2021.10

　More details

Language：Japanese

Industrial property rights

Patent	Number of applications: 25	Number of registrations: 6
Utility model	Number of applications: 0	Number of registrations: 0
Design	Number of applications: 0	Number of registrations: 0
Trademark	Number of applications: 0	Number of registrations: 0

Professional Memberships

The Japan Society of Mechanical Engineers
The Heat Transfer Society of Japan
The Japanese Society for Multiphase Flow
Atomic Energy Society of Japan
Japan Society of Refrigerating and Air Conditioning Engineers
The Japanese Society for Multiphase Flow

　 More details

researchmap
Japan Society of Refrigerating and Air Conditioning Engineers

　 More details

researchmap
The Heat Transfer Society of Japan

　 More details

researchmap
The Japan Society of Mechanical Engineers

　 More details

researchmap
Atomic Energy Society of Japan

　 More details

researchmap

▼display all

Committee Memberships

NEDO 技術委員

2021.8 - 2023.3

　 More details

researchmap
九州大学 G30入試WG 委員

2021.4 - 2022.3

　 More details

Committee type：Other

researchmap
九州大学副コース長

2021.4 - 2022.3

　 More details

Committee type：Other

researchmap
九州大学国際コース運営委員会委員

2021.4 - 2022.3

　 More details

Committee type：Other

researchmap
日本機械学会熱工学部門九州地区代議員

2021.3 - 2022.3

　 More details

researchmap
日本機械学会熱工学部部門運営委員会委員

2021.3 - 2022.2
日本機械学会熱工学部門九州地区代議員

2021.3 - 2022.2
日本機械学会熱工学部部門運営委員会委員

2021.3 - 2022.2

　 More details

researchmap
日本機械学会第98期動力エネルギーシステム部門部門代表委員

2020.4 - 2021.3
日本機械学会第98期動力エネルギーシステム部門部門賞委員

2020.4 - 2021.3
日本混相流学会 Councilor

2019.9 - 2021.8
日本混相流学会 Executive

2019.8 - 2020.8
日本原子力学会論文編集委員会 Iグループ（規定類）委員

2017.7 - 2018.6
日本原子力学会平成29年度第6分野(伝熱流動)論文編集委員正責任者

2017.7 - 2018.6
日本機械学会動力エネルギーシステム部門代表委員

2017.4 - 2019.3
日本機械学会動エネ部門学会企画委員会委員長

2017.4 - 2019.3
日本機械学会動エネ部門第95期運営委員会委員

2017.4 - 2018.3
日本原子力学会熱流動部会出版編集小委員会委員

2017.3 - 2021.5
日本原子力学会熱流動部会出版編集小委員会委員

2017.3

　 More details

researchmap
日本機械学会動力エネルギー部門　第94期運営委員会委員

2016.7 - 2017.3
日本機械学会動力エネルギー部門　関東支部代議員

2016.4 - 2019.3
日本機械学会創立120周年記念事業委員会　10年のあゆみ編纂小委員会委員

2015.6 - 2021.5
日本機械学会動力エネルギー部門　第94期シンポジウム企画委員会委員長

2015.6 - 2016.3
日本機械学会創立120周年記念事業委員会 10年のあゆみ編纂小委員会委員

2015.6

　 More details

researchmap
日本原子力学会年会講演会　プログラム編成委員

2015.4 - 2021.5
日本伝熱学会第54期協議員

2015.4 - 2016.6
日本原子力学会年会講演会プログラム編成委員

2015.4

　 More details

researchmap
日本機械学会動力エネルギー部門第93期シンポジウム企画委員会幹事

2015.3 - 2016.6
日本混相流学会企画運営委員会　幹事

2014.2 - 2021.5
日本機械学会第91期出版センター委員

2013.7 - 2014.3
日本機械学会第91期熱工学部門運営委員

2013.4 - 2014.3
日本混相流学会 Councilor

2012.7 - 2014.5
日本混相流学会 Executive

2012.7 - 2013.8
日本伝熱学会第51期協議員

2012.7 - 2013.5
日本伝熱学会 Councilor

2012.5 - 2013.5
日本機械学会第90期日本機械学会出版センター委員

2012.5 - 2013.3
日本機械学会第90期　校閲委員

2012.4 - 2013.3
日本機械学会第90期　熱工学部門　運営委員会

2012.4 - 2013.3
日本機械学会動力エネルギーシステム部門代表委員

2011.4 - 2012.3
日本混相流学会研究企画委員会研究分科会委員

2007.7 - Present
日本混相流学会研究企画委員会研究分科会委員

2007.7

　 More details

researchmap
日本機械学会動力エネルギーシステム部門学会企画委員会委員

2007.4 - 2008.3
日本伝熱学会 FILGAP委員会委員

2004.9 - 2005.3

▼display all

Academic Activities

International Scientific Committee Member

The 8th International Symposium on Micro and Nano Technology（ISMNT-8）（ Taiwan ） 2021.11

　More details

Type：Competition, symposium, etc.
組織委員会委員 International contribution

第15回動力エネルギー国際会議(ICOPE-2021) （オンライン　その他） 2021.10

　More details

Type：Competition, symposium, etc.
Members of the Scientific Council International contribution

International Centre for Heat and Mass Transfer （その他） 2021.8

　More details

Type：Competition, symposium, etc.
Journal of Thermal Science and Technology (JTST)

2021.4 - 2022.3

　More details

Type：Academic society, research group, etc.
2020年度混相流シンポジウム実行委員

日本混相流学会混相流シンポジウム2020 （ Japan ） 2020.8

　More details

Type：Competition, symposium, etc.
日本機械学会　Journal of Thermal Science and Technology

2020.4 - 2021.3

　More details

Type：Academic society, research group, etc.
座長

第56回日本伝熱シンポジウム（ Japan ） 2019.5

　More details

Type：Competition, symposium, etc.
Member of Steering Committee International contribution

27 th International Conference on Nuclear Engineering（ICONE27）（ Japan ） 2019.5

　More details

Type：Competition, symposium, etc.
Technical Program Committee International contribution

11th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-11), （ Korea ） 2018.11

　More details

Type：Competition, symposium, etc.
Track co-chair of Track 8 Thermal-Hydraulics and Safety Analyses International contribution

26th International Conference on Nuclear Engineering (ICONE26) （ UnitedKingdom ） 2018.7

　More details

Type：Competition, symposium, etc.
熱・流動オーガナイザー

第23回動エネシンポジウム2018 （ Japan ） 2018.6

　More details

Type：Competition, symposium, etc.
Journal of Thermal Science and Technology (JTST)

2018.4 - Present

　More details

Type：Academic society, research group, etc.
Member of Local Organizing Committee, International contribution

9th JSME-KSME Thermal and Fluids Engineering Conference (TFEC9) （ Japan ） 2017.10

　More details

Type：Competition, symposium, etc.
実行委員会委員

日本冷凍空調学会年会講演会201 （ Japan ） 2017.9

　More details

Type：Competition, symposium, etc.
A Member of the Technical Program Committee International contribution

17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics（NURETH-17）（ China ） 2017.9

　More details

Type：Competition, symposium, etc.
Track organizer International contribution

17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics（NURETH-17）（ China ） 2017.9

　More details

Type：Competition, symposium, etc.
実行委員会委員

混相流シンポジウム2017 （ Japan ） 2017.8

　More details

Type：Competition, symposium, etc.
A Member of Technical Programme Committee International contribution

13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2017) （ Slovenia ） 2017.7

　More details

Type：Competition, symposium, etc.
実行委員会委員

第22回動力エネルギー技術シンポジウム（ Japan ） 2017.6

　More details

Type：Competition, symposium, etc.
Journal of Nuclear Science and Technology International contribution

2017.4 - 2018.6

　More details

Type：Academic society, research group, etc.
実行委員会幹事

第21回動力・エネルギー技術シンポジウム（ Japan ） 2016.6

　More details

Type：Competition, symposium, etc.
International Scientific Committee member International contribution

第9回混相流計測技術国際シンポジウム (9th ISMTMF) （ Japan ） 2015.9

　More details

Type：Competition, symposium, etc.
Journal of Nuclear Science and Technology International contribution

2015.9 - 2016.6

　More details

Type：Academic society, research group, etc.
実行委員会委員

第20回動力・エネルギー技術シンポジウム（ Japan ） 2015.6

　More details

Type：Competition, symposium, etc.
日本機械学会　第92期会誌

2014.8 - 2015.3

　More details

Type：Academic society, research group, etc.
A scientific Journal - Refrigeration Engineering and Technologies

2014.4 - Present

　More details

Type：Academic society, research group, etc.
実行委員会委員

第17回オーガナイズド混相流フォーラム（ Japan ） 2013.12

　More details

Type：Competition, symposium, etc.
運営委員会委員長

第17回オーガナイズド混相流フォーラム（ Japan ） 2013.12

　More details

Type：Competition, symposium, etc.
A member of International Scientific Committee of the symposium International contribution

ISTP24 (24th International Symposium on Transport Phenomena）（ Japan ） 2013.11

　More details

Type：Competition, symposium, etc.
開催実行委員会委員

混相流シンポジウム2013 （ Japan ） 2013.8

　More details

Type：Competition, symposium, etc.
実行委員会委員

日本混相流学会年会講演会2012および第31回混相流シンポジウム（ Japan ） 2012.8

　More details

Type：Competition, symposium, etc.
日本伝熱学会論文集TSE

2012.7 - 2013.5

　More details

Type：Academic society, research group, etc.
実行委員会委員

日本伝熱学会　創立50周年記念式典（ Japan ） 2011.11

　More details

Type：Competition, symposium, etc.
日本化学工学会　化工誌

2011.4 - 2013.3

　More details

Type：Academic society, research group, etc.
実行委員会委員

日本機械学会年次大会（ Japan ） 2008.8

　More details

Type：Competition, symposium, etc.
開催実行委員会幹事

日本混相流学会年会講演会（ Japan ） 2005.8

　More details

Type：Competition, symposium, etc.
日本混相流学会　年会講演会2005論文特集号

2005.5 - 2006.3

　More details

Type：Academic society, research group, etc.

▼display all

Research Projects

沸騰と水電解のアナロジーに基づく革新的水素製造のための新学理

Grant number：23H00282 2023 - 2025

Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (A)

　 More details

Authorship：Principal investigator Grant type：Scientific research funding
沸騰と水電解のアナロジーに基づく革新的水素製造のための新学理

2023 - 2025

Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (A)

　 More details

Authorship：Principal investigator Grant type：Scientific research funding
超高温体の急冷機能を付与したハニカム冷却技術による新型原子炉のIVR開発

2023 - 2025

原子力システム研究開発事業（新発想型（一般））

　 More details

Authorship：Principal investigator Grant type：Contract research
二相流CFDに基づく機構論的DNB予測手法の開発

2023 - 2025

原子力システム研究開発事業（ボトルネック）

　 More details

Authorship：Coinvestigator(s) Grant type：Contract research
革新的浸漬沸騰冷却技術の事業化検証

2023

Special Coordination Fund for Promoting Science and Technology (Ministry of Education, Culture, Sports, Science and Technology)

　 More details

Authorship：Principal investigator Grant type：Contract research
ハニカム多孔体とナノ流体の連成による自己組織化マイクロ流路を活用した水電解の革新

Grant number：22K18999 2022 - 2024

Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Challenging Research(Exploratory)

　 More details

Authorship：Principal investigator Grant type：Scientific research funding
新規表界面・微細構造化した伝熱面温度分布の高速・高精細可視化

2022

Japan Society for the Promotion of Science 日本学術振興会外国人招へい研究者

　 More details

Authorship：Principal investigator Grant type：Joint research
安定した沸騰開始と高熱流束除熱が可能な新規浸漬沸騰冷却技術の開発

2022

Special Coordination Fund for Promoting Science and Technology (Ministry of Education, Culture, Sports, Science and Technology)

　 More details

Authorship：Principal investigator Grant type：Contract research
沸騰重畳による高効率水電解技術 ―非平衡効果による100℃程度の排熱の高利活用―

Grant number：21H04665 2021.4 - 2024.3

Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (A)

伊藤衡平, 森昌司, 林灯

　 More details

Grant type：Scientific research funding

申請者は水電解に沸騰を重畳させ、水電解水素製造効率を10%向上する。種々条件を調整すれば、水電解装置を100℃付近で運転でき、この時、沸騰が電極上で起きる。沸騰気泡内の水蒸気圧力は周囲の水に比べて高く、高圧水蒸気によって電極上への水分子の吸着、すなわち電極反応の最初の素過程が加速的に進み、電解電圧が低減し、水電解効率が向上すると考えられる。そこで本申請では、水電解に沸騰を重畳できる水電解電極を構築し、電極微細構造や運転条件等が沸騰重畳効果に及ぼす影響を定量化し、電圧低減メカニズムを明らかにし、理論モデルをツールにして沸騰重畳効果を最大化する水電解装置を開発して水電解効率10%向上を達成する。

CiNii Research
表面・構造機能化による次世代熱物質交換プロセス・制御技術開発

2021 - 2022

エネルギー・環境新技術先導プログラム

　 More details

Authorship：Principal investigator Grant type：Contract research
沸騰と水電解のアナロジーに基づく極限冷却から革新的物質生成への新展開

Grant number：20K20976 2020 - 2021

Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Challenging Research(Exploratory)

　 More details

Authorship：Principal investigator Grant type：Scientific research funding
ハニカム冷却技術による超臨界圧軽水炉のIVR確立

2019 - 2022

文部科学省　原子力システム研究開発事業

　 More details

Authorship：Principal investigator Grant type：Contract research
多孔体表面の微細構造制御による超高温水蒸気生成の物理機構

2018 - 2020

Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C)

　 More details

Authorship：Coinvestigator(s) Grant type：Scientific research funding
エクセルギー損失削減のための熱交換・熱制御技術

2018 - 2019

NEDO先導研究プログラム（エネルギー・環境新技術先導研究プログラム）

　 More details

Authorship：Coinvestigator(s) Grant type：Contract research
ナノマクロHybrid多孔体による超高熱流束除熱の物理機構

2015 - 2016

Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B)

　 More details

Authorship：Principal investigator Grant type：Scientific research funding
革新的な伝熱面構造制御による大型PWRのIVR確立

2014 - 2016

文部科学省　原子力基礎基盤戦略研究イニシアティブ　戦略的原子力共同研究プログラム・復興対策基礎基盤研究プログラム

　 More details

Authorship：Principal investigator Grant type：Contract research
低電力で作動する瞬間小型過熱水蒸気殺菌器の開発

2013

研究成果最適展開支援プログラム　フィージビリティスタディ（A-STEP）

　 More details

Authorship：Principal investigator Grant type：Contract research
研究助成（基礎研究）ぬれ・細孔構造を制御した高機能ハニカム多孔質体による超高熱流束除去への挑戦，

2013

　 More details

Grant type：Donation
「固気液相界面メタフルイディクス」,研究領域「エネルギー高効率利用のための相界面科学」

2011 - 2017

JST Strategic Basic Research Program (Ministry of Education, Culture, Sports, Science and Technology)

　 More details

Authorship：Coinvestigator(s) Grant type：Contract research
ハニカム多孔質体を用いた高発熱密度機器の冷却技術の開発

2011

研究成果最適展開支援プログラム　フィージビリティスタディ（A-STEP）

　 More details

Authorship：Principal investigator Grant type：Contract research
凍結時における分子レベルの組織傷害メカニズムの解明

2008 - 2010

Japan Society for the Promotion of Science Postdoctoral Fellowships for Research Abroad

　 More details

Grant type：Joint research
高機能代替流体による高速軽水炉燃料の熱的限界予測手法の開発

2006 - 2008

文部科学省　原子力システム研究開発事業

　 More details

Authorship：Principal investigator Grant type：Contract research
鉛直上昇沸騰流中の流動障害物近傍における液膜のドライアウトについて

2006

Japan Society for the Promotion of Science International Academic Society Dispatch Program

　 More details

Grant type：Joint research
代替流体を用いた高温高圧下の気液二相流中の障害物近傍における液膜破断機構の解明

2005 - 2006

Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Early-Career Scientists

　 More details

Authorship：Principal investigator Grant type：Scientific research funding
高圧沸騰二相流中の流動障害物近傍における熱流動現象の解明

2002 - 2003

Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Early-Career Scientists

　 More details

Authorship：Principal investigator Grant type：Scientific research funding

▼display all

Educational Activities

I was responsible for a range of undergraduate and graduate courses, providing comprehensive education in the fundamentals and applications of thermal and fluid engineering. Specifically, I taught subjects such as “Heat Transfer I,” “Heat Transfer I & II,” and “Two-Phase Flow Phenomena I & II,” with a focus on heat transfer, boiling, and condensation. In addition, I contributed to liberal arts education and interdisciplinary learning through courses like “Fundamental Engineering Ethics” and the “Special Topics in Mechanical Engineering (VIII),” fostering ethical awareness and a broad academic perspective among students.

Class subject

工学倫理

2024.4 - 2024.8
基幹教育セミナー

2024.4 - 2024.8 Summer quarter
二相流動現象学　Ⅱ

2023.12 - 2024.2 Winter quarter
二相流動現象学　Ⅰ

2023.10 - 2023.12 Fall quarter
伝熱学II（A）

2023.6 - 2023.8 Summer quarter
基幹教育セミナー

2023.6 - 2023.8 Summer quarter
舶用機関

2023.6 - 2023.8 Summer quarter
伝熱学II（A）

2023.6 - 2023.8 Summer quarter
Advanced Thermal Engineering（熱工学講究）

2023.4 - 2024.3 Full year
Seminar in Thermal Engineering（熱工学セミナー）

2023.4 - 2024.3 Full year
伝熱学I（A）

2023.4 - 2023.6 Spring quarter
(IUPE)Heat TransferⅠ

2023.4 - 2023.6 Spring quarter
伝熱学I（A）

2023.4 - 2023.6 Spring quarter
二相流動現象学　Ⅱ

2022.12 - 2023.2 Winter quarter
二相流動現象学

2022.10 - 2023.3 Second semester
産業活動実習Ⅱ

2022.10 - 2023.3 Second semester
産業活動実習Ⅱ

2022.10 - 2023.3 Second semester
二相流動現象学　Ⅰ

2022.10 - 2022.12 Fall quarter
Advanced Thermal Engineering（熱工学講究）

2022.4 - 2023.3 Full year
Advanced Thermal Engineering（熱工学講究）

2022.4 - 2023.3 Full year
Seminar in Thermal Engineering（熱工学セミナー）

2022.4 - 2023.3 Full year
舶用機関

2022.4 - 2022.6 Spring quarter
機械工学A

2022.4 - 2022.6 Spring quarter
舶用機関

2022.4 - 2022.6 Spring quarter
Advanced heat and mass transfer A

2022.4 - 2022.6 Spring quarter
機械工学A

2022.4 - 2022.6 Spring quarter
二相流動現象学　Ⅱ

2021.12 - 2022.2 Winter quarter
二相流動現象学　Ⅱ

2021.12 - 2022.2 Winter quarter
伝熱学Ⅱ（Aクラス）

2021.12 - 2022.2 Winter quarter
二相流動現象学

2021.10 - 2022.3 Second semester
二相流動現象学

2021.10 - 2022.3 Second semester
機械工学A

2021.10 - 2021.12 Fall quarter
二相流動現象学　Ⅰ

2021.10 - 2021.12 Fall quarter
伝熱学Ⅰ（Aクラス）

2021.10 - 2021.12 Fall quarter
二相流動現象学　Ⅰ

2021.10 - 2021.12 Fall quarter
舶用機関

2021.4 - 2021.6 Spring quarter
伝熱学Ⅱ（Aクラス）

2020.12 - 2021.2 Winter quarter
二相流動現象学

2020.10 - 2021.3 Second semester
伝熱学Ⅰ(Aクラス）

2020.10 - 2020.12 Fall quarter
舶用機関

2020.6 - 2020.8 Summer quarter
機械工学・航空宇宙工学序論

2020.4 - 2020.9 First semester
伝熱学Ⅱ（Aクラス）

2019.12 - 2020.2 Winter quarter
二相流動現象学

2019.10 - 2020.3 Second semester
伝熱学Ⅰ（Aクラス）

2019.10 - 2019.12 Fall quarter
伝熱学I（A）

2019.4 - Present Spring quarter
(IUPE)Heat TransferⅠ

2019.4 - Present Spring quarter
Seminar in Thermal Engineering（熱工学セミナー）

2019.4 - Present Full year
Advanced Thermal Engineering（熱工学講究）

2019.4 - Present Full year
舶用機関

2019.4 - Present Summer quarter
二相流動現象学　Ⅱ

2019.4 - Present Winter quarter
二相流動現象学　Ⅰ

2019.4 - Present Fall quarter
伝熱学II（A）

2019.4 - Present Summer quarter

▼display all

Teaching Student Awards

第62回伝熱シンポジウム　優秀プレゼンテーション賞

Year and month of award：2025.5

Classification of award-winning students：Doctoral student Name of award-winning student：林田侑也

　 More details
The 34th International Symposium on Transport Phenomena (ISTP-34)、Best Student’s Presentation Award

Year and month of award：2024.11

Classification of award-winning students：Doctoral student Name of award-winning student：林田侑也
日本原子力学会2024春の年会優秀講演賞

Year and month of award：2024.3

Classification of award-winning students：Doctoral student Name of award-winning student：林田侑也
日本機械学会九州支部九州学生会第55回学生員卒業研究発表講演会優秀講演賞

Year and month of award：2024.3

Classification of award-winning students：Undergraduate student Name of award-winning student：高木　凌
日本混相流学会萌芽賞

Year and month of award：2023.8

Classification of award-winning students：Doctoral student Name of award-winning student：2. Huacheng Zhang

　 More details

Acceptance of Foreign Researchers, etc.

Massachusetts Institute of Technology

Acceptance period： 2024.1 （Period）：2weeks to less than 1 month

Nationality：Italy

Business entity：Science and Technology Agency
Chongqing University of Tech nology

Acceptance period： 2023.11 - 2024.10 （Period）：1 month or more

Nationality：China

Business entity：Foreign governments, foreign research institutes, international organizations