Updated on 2024/10/04

Information

 

写真a

 
KUDO KENTARO
 
Organization
Faculty of Engineering Department of Mechanical Engineering Assistant Professor
School of Engineering （Concurrent）
Graduate School of Engineering Department of Mechanical Engineering（Concurrent）
Title
Assistant Professor
Contact information
メールアドレス
Profile
Research on material processing mainly in powder metallurgy process. In particular, research has been conducted on the characteristics of metal materials produced by metal injection molding (MIM).
External link

Degree

  • Doctor of engineering (Kyushu University)

Research Interests・Research Keywords

  • Research theme：Research on Ni based super-alloy by metal injection molding

    Keyword：Metal injection molding, Ni　based super-alloy

    Research period： 2017.4 - 2019.6

  • Research theme：Improvement of fatigue strength of Ti alloy manufactured by metal injection molding

    Keyword：Metal injection molding, fatigue, Titanium alloy

    Research period： 2015.4 - 2019.6

Awards

  • 第43回　研究進歩賞

    2019.6   粉体粉末冶金協会   金属粉末射出成型Ti-6Al-4V合金の高疲労強度化とその支配因子の解明

  • 優秀講演発表賞

    2011.11   粉体粉末冶金協会  

Papers

  • The Effects of Grain Size and Pore Size on the High Cycle Fatigue Behavior of Injection Molded Ti-6Al-4V Compacts Reviewed International journal

    K. KUDO, K. SHINAGAWA , H. MIURA

    243 - 252   2018.6

    　More details

    Language：English   Publishing type：Research paper (international conference proceedings)  

    Repository Public URL： https://hdl.handle.net/2324/7171762

  • Effect of α + β region sintering on the mechanical properties of injection molded Ti-6Al-4V compacts Reviewed International journal

    5 ( 4 )   2018.4

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    Repository Public URL： https://hdl.handle.net/2324/7171758

  • Evaluation of influence factors on the microstructure, static and dynamic mechanical properties of injection molded Ti-6Al-4V based compacts by multiple addition of Mo and B Elements Reviewed

    Kentaro Kudo, Kazunari Shinagawa, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   65 ( 3 )   145 - 153   2018.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.65.145

    Repository Public URL： https://hdl.handle.net/2324/7171760

  • Effect of Grain Size on the Fatigue Properties of Injection Molded Ti-6Al-4V Compacts Reviewed International journal

    K. KUDO, H. ISHIMITSU, J. CHOE, T. OSADA, H. MIURA, K. SHINAGAWA

    Proceedings of the 2016 Powder Metallurgy World Congress & Exhibition, 3291789   1 - 6   2016.10

    　More details

    Language：English   Publishing type：Research paper (international conference proceedings)  

  • Improvement of mechanical properties of injection molded ni-base superalloy compacts Reviewed

    Kentaro Kudo, Sek Kin Wai, Toshiko Osada, Fujio Tsumori, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   63 ( 7 )   462 - 467   2016.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.63.462

  • 高Ni焼結合金鋼におけるメゾへテロ組織及び転造の面圧疲労強度に及ぼす影響 Reviewed

    工藤　健太郎，徳岡　輝和，姜　賢求，長田　稔子，津守　不二夫，三浦　秀士

    粉体および粉末冶金   59 ( 5 )   258 - 263   2012.5

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

  • 焼結Ni合金鋼歯車におけるメゾへテロ組織及び転造の歯元曲げ疲労特性に及ぼす影響 Reviewed

    徳岡　輝和，山本　龍，工藤　健太郎，津守　不二夫，三浦　秀士

    粉体および粉末冶金   58 ( 6 )   350 - 354   2011.1

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

  • Simulation of Anisotropic Sintering of Elliptical Particles by Combined PFM/DEM Approach

    SHINAGAWA Kazunari, KUDO Kentaro, YODOSHI Noriharu

    Journal of the Japan Society of Powder and Powder Metallurgy   advpub ( 0 )   2024   （ ISSN:05328799 eISSN:18809014 ）

    　More details

    Language：English   Publisher：Japan Society of Powder and Powder Metallurgy  

    <p>Anisotropic shrinkage of powder compacts is often observed in sintering process. Although controlling the shape and size of the sintered body is important to reduce manufacturing cost, it is difficult to understand the factors affecting anisotropic behavior only by experimental observation. In the present study, two-dimensional numerical simulation for sintering process of elliptical particles is performed with changing particle alignment and orientation by using a combined phase-field method (PFM) and discrete element method (DEM). The effects of the size of inter-particle contact plane, the sintering force, and the pore configuration on sintering anisotropy are examined. According to the calculated results, anisotropic shrinkage appears depending on the particle arrangement. The elliptical particles oriented horizontally enhance the horizontal shrinkage. The inter-particle contact in vertical direction reduces the vertical shrinkage. The shrinkage behavior of compacts of elliptical particles can be basically explained by considering the combination of the sintering stress and the size of inter-particle contact plane, except the case of arrangement with largely elongated pore structure.</p>

    DOI： 10.2497/jjspm.24-00011

    CiNii Research

  • Improvement of Fatigue Strength of Injection Molded Ti-6Al-4V Alloys and Elucidation of Controlling Factors in Fatigue Strength

    KUDO Kentaro, SHINAGAWA Kazunari, MIURA Hideshi

    Journal of the Japan Society of Powder and Powder Metallurgy   70 ( 7 )   319 - 325   2023.7   （ ISSN:05328799 eISSN:18809014 ）

    　More details

    Language：Japanese   Publisher：Japan Society of Powder and Powder Metallurgy  

    <p>Since Ti alloys are difficult-to-machine materials, the application of powder metallurgy such as metal injection molding (MIM) is desired. Although injection molded Ti-6Al-4V alloys showed sufficient tensile properties, their fatigue strength was significantly lower than that of the wrought material. In this study, various approaches were applied to improve the fatigue strength through MIM processing parameters such as raw material powders, addition of 4th and 5th elements such as Mo and B, sintering techniques, and heat treatment conditions. Eventually, we obtained the fatigue strength as same as wrought materials. We also investigated the factors, which control the fatigue strength of injection molded Ti alloys. Regarding the relationship between the pore size and grain size on the fatigue strength, it was found that the crack initiation occurred from the largest pore when the ratio of the pore size to the grain size was large, and simultaneously the fatigue strength was significantly decreased.</p>

    DOI： 10.2497/jjspm.70.319

    Scopus

    CiNii Research

  • Quantitative estimation of contribution of pore size and the distance between nearest neighbour pores on high cycle fatigue (HCF) crack initiation in Ti-6Al-4V MIM-sintered materials Invited Reviewed International journal

    Isshin Ando, Kentaro Kudo, Kyosuke Hirayama, Yuji Shigeta, Kazunari Shinagawa, Akihisa Takeuchi, Masayuki Uesugi, Yukiko Ozaki,

    International Journal of Fatigue   2023.2

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    Repository Public URL： https://hdl.handle.net/2324/7171755

  • Understanding the effect of process parameters on three-dimensional pore　configurations and mechanical properties of laser additive manufactured Ti　using synchrotron X-ray computed tomography and homology Reviewed International journal

    2022.10

    　More details

    Language：English   Publishing type：Research paper (international conference proceedings)  

  • Understanding The Effect Of Process Parameters On Three-Dimensional Pore Configurations And Mechanical Properties Of Laser Additive Manufactured Ti Using Synchrotron X-Ray Computed Tomography And Homology

    Yuji S., Masatoshi A., Kentaro K., Kazunari S., Naoyuki N., Katsuyoshi K., Masato H., Kentaro U., Yukiko O.

    World PM 2022 Congress Proceedings   2022   （ ISBN:9781899072552 ）

    　More details

    Publisher：World PM 2022 Congress Proceedings  

    To establish a quantitative relationship between fabrication parameters, pore-configuration, and mechanical properties in porous materials, the pore configurations were visualized by X-ray computed tomography (CT) about pure Ti-AM specimens fabricated under different laser beam conditions. Radius and sphericity of all pores were obtained by image analysis. Furthermore, using the 0th persistent homology, the pore configurations were qualified by the pair of birth and death values, b and d for all pores: |b| means a pore radius and d correspond to a half distance between adjacent pores. The significant correlations were confirmed between tensile strength/elongation and the parameters: the maximum value of |b|, the ratio of the mean values of |b| and d (neck geometry), and the sphericity of the largest pore. These were proposed as useful structural parameters representing 3D pore-structure in porous materials.

    Scopus

  • Development of printing system for magnetically anisotropic actuator

    Seiji Azukizawa, Fujio Tsumori, Hayato Shinoda, Kazuki Tokumaru, Kentaro Kudo, Kazunari Shinagawa

    21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017   623 - 624   2020.1

    　More details

    Language：English   Publishing type：Research paper (other academic)  

  • Visco-elastic control of elastomer with magnetic particles by applied magnetic field Reviewed

    Daiki Maede, Fujio Tsumori, Toshiko Osada, Kentaro Kudo

    IEEJ Transactions on Sensors and Micromachines   138 ( 2 )   48 - 53   2018.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.1541/ieejsmas.138.48

  • The effects of grain size and pore size on the high cycle fatigue behavior of injection molded Ti-6Al-4V compacts

    Kentaro Kudo, Kazunari Shinagawa, Hideshi Miura

    2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 Advances in Powder Metallurgy and Particulate Materials - 2018 Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018   243 - 252   2018.1

    　More details

    Language：English   Publishing type：Research paper (other academic)  

  • セラミック平板の焼結変形に及ぼす寸法効果の解析的検討

    安永 大輝, 工藤 健太郎, 津守 不二夫, 品川 一成

    日本機械学会九州支部講演論文集   2018 ( 0 )   G12   2018

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    DOI： 10.1299/jsmekyushu.2018.71.G12

  • 磁性微粒子鎖配向型3Dプリンティング法による磁場駆動アクチュエータの開発

    小豆澤 成治, 徳丸 和樹, 工藤 健太郎, 品川 一成, 津守 不二夫

    日本機械学会九州支部講演論文集   2018 ( 0 )   G24   2018

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    DOI： 10.1299/jsmekyushu.2018.71.G24

  • 外部磁場駆動型人工繊毛による3次元的な繊毛運動の設計

    丸目 隆真, 工藤 健太郎, 品川 一成, 津守 不二夫

    日本機械学会九州支部講演論文集   2018 ( 0 )   G23   2018

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    DOI： 10.1299/jsmekyushu.2018.71.G23

  • 不均一粉末充填構造を持つマイクロ成形体の焼結解析

    山田 拓也, 工藤 健太郎, 津守 不二夫, 品川 一成

    日本機械学会九州支部講演論文集   2018 ( 0 )   G22   2018

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    DOI： 10.1299/jsmekyushu.2018.71.G22

  • レーザ衝撃波によるセラミック粉末の常温固化に向けた堆積パターニング

    神野 謙吾, 工藤 健太郎, 品川 一成, 津守 不二夫

    日本機械学会九州支部講演論文集   2018 ( 0 )   G16   2018

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    DOI： 10.1299/jsmekyushu.2018.71.G16

  • セラミック板状粒子の配向挙動に及ぼす異周速圧延の効果

    小家石 匠, 工藤 健太郎, 津守 不二夫, 品川 一成

    日本機械学会九州支部講演論文集   2018 ( 0 )   G11   2018

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    DOI： 10.1299/jsmekyushu.2018.71.G11

  • Development of magnetic-field-driven artificial cilium array with magnetic orientation in each cilium Reviewed

    Ryuma Marume, Fujio Tsumori, Kentaro Kudo, Toshiko Osada, Kazunari Shinagawa

    Japanese Journal of Applied Physics   56 ( 6 )   2017.6

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.7567/JJAP.56.06GN15

  • Development of multilayer imprint process for solid oxide fuel cells Reviewed

    Kazuki Tokumaru, Fujio Tsumori, Kentaro Kudo, Toshiko Osada, Kazunari Shinagawa

    Japanese Journal of Applied Physics   56 ( 6 )   2017.6

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.7567/JJAP.56.06GL04

  • Control the Deformation of MIM Parts by the Powder Size Distribution Reviewed International journal

    T. OSADA, K. KUDO, R. HASHIKAWA, F. TSUMORI, H. MIURA

    Proceedings of the 2016 Powder Metallurgy World Congress & Exhibition, 3307923   1 - 6   2016.10

    　More details

    Language：English   Publishing type：Research paper (international conference proceedings)  

  • Development of three-dimensional printing system for magnetic elastomer with control of magnetic anisotropy in the structure Reviewed

    Fujio Tsumori, Hidenori Kawanishi, Kentaro Kudo, Toshiko Osada, Hideshi Miura

    Japanese Journal of Applied Physics   55 ( 6 )   2016.6

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.7567/JJAP.55.06GP18

  • Metachronal wave of artificial cilia array actuated by applied magnetic field Reviewed

    Fujio Tsumori, Ryuma Marume, Akinori Saijou, Kentaro Kudo, Toshiko Osada, Hideshi Miura

    Japanese Journal of Applied Physics   55 ( 6 )   2016.6

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.7567/JJAP.55.06GP19

  • Wavy micro channels in micropatterned ceramic sheet formed by combined process of laser beam machining and imprinting Reviewed

    Fujio Tsumori, Simon Hunt, Kentaro Kudo, Toshiko Osada, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   63 ( 7 )   511 - 518   2016.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.63.511

  • Static and dynamic fracture characteristics of the MIM Ti-6Al-4V alloy compacts using fine powder Reviewed

    Kentaro Kudo, Hiroyoshi Ishimitsu, Toshiko Osada, Fujio Tsumori, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   63 ( 7 )   445 - 450   2016.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.63.445

  • High temperature mechanical properties of TiAl intermetallic alloy parts fabricated by metal injection molding Reviewed

    Toshiko Osada, Yusuke Kanda, Kentaro Kudo, Fujio Tsumori, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   63 ( 7 )   457 - 461   2016.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.63.457

  • Effect of minor boron addition on the fatigue strength and high temperature properties of injection molded Ti-6Al-4V compacts Reviewed

    Jungho Choe, Toshiko Osada, Kentaro Kudo, Fujio Tsumori, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   63 ( 7 )   451 - 456   2016.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.63.451

  • Development of corrugated ceramic sheet for SOFC electrolyte by micro imprint process Reviewed

    Fujio Tsumori, Kazuki Tokumaru, Kentaro Kudo, Toshiko Osada, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   63 ( 7 )   519 - 523   2016.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.63.519

  • Control the distortion of the large and complex shaped parts by the metal injection molding process Reviewed

    Ryuichi Hashikawa, Toshiko Osada, Kentaro Kudo, Fujio Tsumori, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   63 ( 7 )   473 - 478   2016.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.63.473

  • Anisotropic mechanical properties of ni-base superalloy compacts by direct laser forming technology Reviewed

    Naoto Yoshigai, Kentaro Kudo, Fujio Tsumori, Toshiko Osada, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   63 ( 7 )   427 - 433   2016.1

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.63.427

  • ヘテロ組織を有する Fe-Mn 超強靭焼結低合金鋼の開発

    安井 健太, 長田 稔子, 工藤 健太郎, 津守 不二夫, 三浦 秀士

    年次大会   2016 ( 0 )   S0410205   2016

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    Fe-Ni low alloy steels with heterogeneous structure fabricated through metal injection molding process show high strength and elongation. However, these materials are high cost because they contain Ni. The purpose of this study is development of material that indicates high strength and elongation in using Mn instead of Ni. Cost of Mn is lower than that of Ni. In this report, we were various survey of sintered and heat treated Fe-2Mn-0.65C, Fe-6Mn-0.70C. As results, sintered Fe-2Mn-0.65C shows the ferrite pearlite structure, therefore elongation of this material was 21.0 %. On the other hand, sintered Fe-6Mn-0.70C has pearlite and bainite structure and elongation of this material was 2.8 %, much lower than that of Fe-2Mn-0.65C. Complex structure of martensite and tempered martensite was confirmed at heat treated Fe-2Mn-0.65C. Heat treated Fe-2Mn-0.65C Tensile strength and elongation of heat treated Fe-2Mn-0.65C were 1193 MPa and 0.8 %.

    DOI： 10.1299/jsmemecj.2016.S0410205

  • 金属粉末射出成形法による大型複雑形状部品の変形制御

    長田 稔子, 橋川 龍一, 工藤 健太郎, 津守 不二夫, 三浦 秀士

    年次大会   2016 ( 0 )   S0410101   2016

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    Metal Injection Molding (MIM) process is suitable for fabricating small parts in large quantity. Fabricating the relatively large and complex shaped parts through MIM is difficult for large deformation during debinding and sintering. In order to decrease the deformation of sintered parts, powders of different size distributions were mixed. The effect of powder particle distribution and powder loading on the distortion of complex shaped compacts were investigated and evaluated. Smaller deformation of the large and complex shaped parts could be realized by using mixed powder with smaller particle. This is because the necking of smaller powders in mixed compacts at early stage of sintering, and large powders were rocked by smaller particles.

    DOI： 10.1299/jsmemecj.2016.S0410101

  • 磁性粒子分散エラストマーを用いた４Ｄプリンティングプロセスの開発

    津守 不二夫, 工藤 健太郎, 長田 稔子

    年次大会   2016 ( 0 )   S0440104   2016

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    DOI： 10.1299/jsmemecj.2016.S0440104

  • 磁性粒子分散エラストマーの磁場による粘弾性特性制御

    前出 大輝, 津守 不二夫, 工藤 健太郎, 長田 稔子

    年次大会   2016 ( 0 )   J2230204   2016

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    The purpose of this study was to explicate the mechanism of transition storage modulus and loss modulus under external magnetic field. Magneto-rheological elastomer (MRE) is expected to be used as damping material and actuator controlled by an external magnetic field. However, magnetic particles' behavior inside of MRE has not been explained completely. Especially, the mechanisms of loss modulus transition under external magnetic field has not been known well. We constructed a simple model with two magnetic particles, and try to make MRE behavior clear. In this report, we show a data of the viscoelastic property of MRE which consists of magnetic particles and polydimethylsiloxane (PDMS). The obtained viscoelastic property is explained by using two magneto particles model.

    DOI： 10.1299/jsmemecj.2016.J2230204

  • マイクロインプリントプロセスによるセラミックス微細表面パターニング

    津守 不二夫, 徳丸 和樹, ハント ハント, 工藤 健太郎, 長田 稔子

    年次大会   2016 ( 0 )   S0410206   2016

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

    DOI： 10.1299/jsmemecj.2016.S0410206

  • MIMによるFe-Cr系軟磁性材料の磁気特性に及ぼすCr量の影響 Reviewed

    佐野　陽平，長田　稔子，工藤　健太郎，津守　不二夫，三浦　秀士，田家　真紀子，田中　茂雄

    粉体および粉末冶金   62 ( 8 )   431 - 436   2015.8

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

  • Effect of Cr content on the magnetic properties of Fe-Cr soft magnetic material by MIM process Reviewed

    Yohei Sano, Toshiko Osada, Kentaro Kudo, Fujio Tsumori, Hideshi Miura, Makiko Tange, Shigeo Tanaka

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   62 ( 8 )   431 - 436   2015.8

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.62.431

  • Improvement of Fatigue Strength for Titanium Alloy Compacts by MIM Invited Reviewed International journal

    J. CHOE, T. OSADA, K. KUDO, F. TSUMORI, H. MIURA

    04-71 - 04-78   2015.7

    　More details

    Language：English   Publishing type：Research paper (international conference proceedings)  

  • Effect of mezzo-heterogeneous microstructure and rolling on the rolling contact fatigue strength of sintered high Ni alloy steels Reviewed

    Kentaro Kudo, Terukazu Tokuoka, Hyungoo Kang, Toshiko Osada, Fujio Tsumori, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   59 ( 5 )   258 - 263   2012.5

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.59.258

  • Mo 添加鉄系焼結合金歯車の歯元転造加工による表面緻密化および高強度化 Reviewed

    宇波　繁，合志　拓也，工藤　健太郎，津守　不二夫，姜　賢求，三浦　秀士

    粉体および粉末冶金   58 ( 11 )   692 - 696   2011.11

    　More details

    Language：Japanese   Publishing type：Research paper (scientific journal)  

  • Improvement of surface densificaron and fatigue strength by tooth root rolling of sintered ferrous alloy gear added Mo Reviewed

    Shigeru Unami, Takuya Goushi, Kentaro Kudo, Fujio Tsumori, Hyung Goo Kang, Hideshi Miura

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   58 ( 11 )   692 - 696   2011.11

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.58.692

  • Effect of mezzo-heterogeneous microstructure and rolling on the tooth root bending fatigue properties of sintered Ni alloy steel gears Reviewed

    Terukazu Tokuoka, Torn Yamamoto, Kentaro Kudo, Fujio Tsumori, Hideshi Miura, Takao Nishioka

    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy   58 ( 6 )   350 - 354   2011.6

    　More details

    Language：English   Publishing type：Research paper (scientific journal)  

    DOI： 10.2497/jjspm.58.350

  • Effect of Microstructure on the Rolling Contact Fatigue Strength of 4600 Steel P/M Compacts Reviewed International journal

    T. TOKUOKA, Y. NAKAHARA, K. KUDO, T. NISHIOKA, H. MIURA

    European PM Conference Proceedings, European Congress and Exhibition on Powder Metallurgy   1 - 10   2010.10

    　More details

    Language：English   Publishing type：Research paper (international conference proceedings)  

▼display all

Presentations

  • Simulation of anisotropic sintering of elliptical particles by combined PFM/DEM approach

    K. Shinagawa, K. Kudo, N. Yodoshi,

    JSPM International Conference on Powder and Powder Metallurgy  2023.10 

    　More details

    Event date： 2024.5

    Language：English  

    Country：Japan  

  • シンクロトロン光Ｘ線ＣＴによるガスアトマイズ粉末の３次元形状および気孔量の評価

    小城原 尭也, 吉年 規治, 工藤 健太郎，品川 一成，櫻井 郁也，佐藤 充孝，正橋 直哉，吉川 穣，伊藤 桂介

    粉体粉末冶金協会2023年度秋季大会  2023.10 

    　More details

    Event date： 2024.5

    Language：Japanese  

    Country：Japan  

  • 異周速粉末圧延の有限要素解析と板状粒子配向挙動のシミュレーション

    秋武 幸汰，工藤 健太郎，吉年 規治，品川 一成

    2023年度塑性加工春季講演大会  2023.6 

    　More details

    Event date： 2023.6

    Language：Japanese  

    Country：Japan  

  • 焼結―圧縮試験によるNi基超合金の焼結特性

    工藤 健太郎，品川 一成

    粉体粉末冶金協会2022年度秋季大会  2022.11 

    　More details

    Event date： 2023.6

    Language：Japanese  

    Country：Japan  

  • Phase-field simulation of the mesoscale microstructure evolution of an injection molded Ni-base superalloy during sintering

    T. Hoefler, K. Kudo, K. Shinagawa

    2022.11 

    　More details

    Event date： 2023.6

    Language：English  

    Country：Japan  

  • Fe-Cr系焼結・真空浸炭材の耐摩耗性

    三重野 収間, 工藤 健太郎, 荒牧 正俊, 品川 一成, 尾﨑 由紀子，作田 英久, 大西 拓，

    粉体粉末冶金協会2022年度秋季大会  2022.11 

    　More details

    Event date： 2023.6

    Language：Japanese  

    Country：Japan  

  • シンクロトロン光X線CTによるガスアトマイズ粉末評価と気孔成形因子の検討

    吉年 規治，小城原 尭也，工藤 健太郎，品川 一成，櫻井 郁也，佐藤 充孝，正橋 直哉，吉川 穣，伊藤 桂介

    粉体粉末冶金協会2023年度春季大会  2023.6 

    　More details

    Event date： 2023.6

    Language：Japanese  

    Country：Japan  

  • パーシステントホモロジーによるTi-AM材の延性き裂発生に関わる3D欠陥配置の特定

    重田 雄二，荒牧 正俊，工藤 健太郎，品川 一成，野村 直之，近藤 勝義，尾﨑 由紀子

    粉体粉末冶金協会2023年度春季大会  2023.6 

    　More details

    Event date： 2023.6

    Language：Japanese  

    Country：Japan  

  • Simulating Mesoscale Microstructure Evolution During Sintering of an Injection Molded Ni-base Superalloy Using the Phase-Field Method

    2022.5 

    　More details

    Event date： 2022.6

    Language：English  

    Country：Japan  

  • Analysis of orientation behavior of plate-like particles in differential speed powder rolling

    K. Shinagawa, K. Kudo,

    The 13th International Conference on the Technology of Plasticity  2021.7 

    　More details

    Event date： 2022.6

    Language：English  

    Country：Japan  

  • X線CTによって可視化されたTi6Al4V-MIM材の残留気孔の数値化, 日本鉄鋼協会第182回秋季講演大会

    安東 壱進，工藤 健太郎，平山 恭介，重田 雄二，品川 一成，尾﨑 由紀子

    日本鉄鋼協会第182回秋季講演大会  2021.9 

    　More details

    Event date： 2022.6

    Language：Japanese  

    Country：Japan  

  • Fe-Cr系焼結材料に対する浸炭雰囲気の機械的強度への影響

    山田 宰, 工藤 健太郎, 荒牧 正俊, 品川 一成, 三浦秀士, 尾﨑 由紀子, 作田 英久, 大西 拓也

    粉体粉末冶金協会2021年度秋季大会  2021.11 

    　More details

    Event date： 2022.6

    Language：Japanese  

    Country：Japan  

  • フェーズフィールド法による射出成形した Ni超合金の焼結中における炭化物の析出・溶解のシミュレーション

    ヘーフラ トーマス, 工藤 健太郎, 品川 一成

    粉体粉末冶金協会2021年度秋季大会  2021.11 

    　More details

    Event date： 2022.6

    Language：Japanese  

    Country：Japan  

  • 段付き圧粉体の焼結変形とクラック発生のその場観察

    工藤 健太郎、与那覇 舜、吉年 規治、品川 一成

    粉体粉末冶金協会2022年度春季大会  2022.5 

    　More details

    Event date： 2022.6

    Language：Japanese  

    Country：Japan  

  • チタン積層造形材における3次元構造欠陥が引張強度に及ぼす影響

    重田 雄二、荒牧 正俊、工藤 健太郎、品川 一成、野村 直之、近藤 勝義、尾﨑 由紀子

    粉体粉末冶金協会2022年度春季大会  2022.5 

    　More details

    Event date： 2022.6

    Language：Japanese  

    Country：Japan  

  • 金属粉末射出成形 Ti-6Al-4V 合金の高疲労強度化とその支配因子の解明

    工藤 健太郎，品川 一成，三浦 秀士

    粉体粉末冶金協会2021年度春季大会  2021.6 

    　More details

    Event date： 2021.6

    Language：Japanese  

    Country：Japan  

  • PFM/DEM連成による異種粉末成形体の焼結解析

    池田 俊輝，工藤 健太郎, 品川 一成

    粉体粉末冶金協会2020年度秋季大会  2020.10 

    　More details

    Event date： 2021.6

    Language：Japanese  

    Country：Japan  

  • 雰囲気制御焼結―圧縮試験によるNi基超合金粉末成形体の材料特性評価

    工藤 健太郎，品川 一成

    粉体粉末冶金協会2020年度秋季大会  2021.10 

    　More details

    Event date： 2021.6

    Language：Japanese  

    Country：Japan  

  • 焼結特性を考慮したHIP工程解析

    品川 一成，工藤 健太郎

    日本機械学会第28回機械材料・材料加工技術講演会  2020.11 

    　More details

    Event date： 2021.6

    Language：Japanese  

    Country：Japan  

  • 混合率と分散度が異なる異種混合粉末のPFM/DEM連成焼結解析

    池田 俊輝，工藤 健太郎，品川 一成

    粉体粉末冶金協会2021年度春季大会  2021.6 

    　More details

    Event date： 2021.6

    Language：Japanese  

    Country：Japan  

  • Fe-P系合金の液相焼結における緻密化挙動に及ぼす粉末混合条件の影響

    二田水 宏至, 工藤 健太郎, 品川 一成, 三富 将敬, 濱松 宏武

    粉体粉末冶金協会2019年度秋春季大会  2019.10 

    　More details

    Event date： 2020.6

    Language：Japanese   Presentation type：Oral presentation (general)  

    Country：Japan  

  • Development of materials database for sintering analysis of Ni-based superalloy International conference

    K. Kudo, K. Shinagawa

    NIMS WEEK 2019 Academic Symposium  2019.10 

    　More details

    Event date： 2019.10

    Language：English  

    Country：Japan  

  • 金属粉末射出成型法による大型複雑形状部品の変形制御

    長田 稔子，橋川　龍一，工藤　健太郎，津守　不二夫，三浦 秀士

    日本機械学会 2016年度年次大会  2016.9 

    　More details

    Event date： 2019.9 - 2019.6

    Language：Japanese  

    Country：Japan  

  • 異周速粉末圧延におけるセラミック板状粒子配向挙動のシミュレーション

    小家石　匠，　工藤　健太郎，　品川　一成，　　馮　旗

    2019年度塑性加工春季講演会  2019.6 

    　More details

    Event date： 2019.6

    Language：Japanese   Presentation type：Oral presentation (general)  

    Country：Japan  

  • 射出成形製Rene80の液相焼結における結晶粒粗大化挙動と機械的特性

    工藤 健太郎、品川 一成、大長 優、南 大基

    粉体粉末冶金大会　2019年度春季大会（第123回講演大会）  2019.6 

    　More details

    Event date： 2019.6

    Language：Japanese   Presentation type：Oral presentation (general)  

    Country：Japan  

  • PFM/DEM連成による楕円粒子成形体の異方性焼結収縮のシミュレーション

    池田 俊輝, 工藤 健太郎, 品川 一成

    粉体粉末冶金協会2019年度春季大会  2019.6 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • 高Ni焼結合金鋼におけるメゾヘテロ組織および転造の面圧疲労強度に及ぼす影響

    工藤　健太郎　姜　賢求，津守　不二夫，三浦　秀士，徳岡　輝和，西岡　隆夫

    粉体粉末冶金協会　平成23年度秋季大会  2011.10 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • 転造加工による焼結鋼の気孔径分布変化と疲労強度への影響

    津守　不二夫，工藤　健太郎，姜　賢求，長田　稔子，三浦　秀士

    粉体粉末冶金協会 平成２４年度秋季大会  2012.11 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • Wavy Micro Channels in Micropatterned Ceramic Sheet Formed by Combined Process of Laser Beam Machining and Imprinting

    S. HUNT, F. TSUMORI, K. KUDO, T. OSADA, H. MIURA

    2015.11 

    　More details

    Event date： 2019.6

    Language：English  

    Country：Japan  

  • Development of Corrugated Ceramic Sheet for SOFC Electrolyte by Micro Imprint Process

    K. TOKUMARU, F. TSUMORI, K. KUDO, T. OSADA, H. MIURA

    2015.11 

    　More details

    Event date： 2019.6

    Language：English  

    Country：Japan  

  • Static and Dynamic Fracture Characteristics of the MIM Ti-6Al-4V Alloy Compacts Using Fine Powder International conference

    H. ISHIMITSU, T. OSADA, K. KUDO, F. TSUMORI, H. MIURA

    2015.11 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • Effect of Minor Boron Addition on the Fatigue Strength and High Temperature Properties of Injection Molded Ti-6Al-4V Compacts

    J. CHOE, T. OSADA, K. KUDO, F. TSUMORI, H. MIURA

    2015.11 

    　More details

    Event date： 2019.6

    Language：English  

    Country：Japan  

  • High Temperature Mechanical Properties of TiAl Alloy Parts Fabricated By Metal Injection Molding

    T. OSADA, Y. KANDA, K. KUDO, F. TSUMORI, H. MIURA

    2015.11 

    　More details

    Event date： 2019.6

    Language：English  

    Country：Japan  

  • Improvement of Mechanical Properties of Injection Molded Ni-Base Superalloy Compacts

    K. KUDO, K. W. SEK, T. OSADA, F. TSUMORI, H. MIURA

    2015.11 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • Control the Distortion of Large and Complex Shaped Parts by Metal Injection Molding Process International conference

    R. HASHIKAWA, T. OSADA, K. KUDO, F. TSUMORI, H. MIURA

    2015.11 

    　More details

    Event date： 2019.6

    Language：English  

    Country：Japan  

  • Fatigue properties of MIM super-high strengthened Fe-Ni steels with heterogeneous microstructures

    H. Miura, T. Osada, Z. Song, K. Yasui, K. Kudo

    2016 International Conference on Powder Metallurgy & Particulate Materials, POWDERMET2016  2016.7 

    　More details

    Event date： 2019.6

    Language：English  

    Country：United States  

  • Ti-6Al-4V MIM 焼結体の疲労強度に及ぼす結晶粒径の影響

    工藤　健太郎，長田 稔子，津守　不二夫，三浦 秀士，品川 一成

    日本機械学会 2016年度年次大会  2016.9 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • ヘテロ組織を有するFe-Mn超強靭焼結低合金鋼の開発

    安井　健太，長田 稔子，工藤　健太郎，津守　不二夫，三浦 秀士

    日本機械学会 ２０１６年度年次大会  2016.9 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • Improvement of Mechanical Properties of Injection Molded Ti-6Al-4V Alloy Compacts for Aerospace Application International conference

    H. Miura, K. Kudo, T. Osada

    MN Hong Long Meeting & Collaborative Conference on Mobile Health  2016.12 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • MIMプロセス製航空機用各種合金の疲労特性

    工藤　健太郎

    第29回　射出成形技術・評価研究会  2016.12 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • 8. Super Excellent MIM Ti Alloys for Aerospace Application International conference

    H. MIURA, K. KUDO, T. OSADA

    4th International Conference on Titanium Powder Metallurgy & Additive Manufacturing PMTi2017  2017.9 

    　More details

    Event date： 2019.6

    Language：English  

    Country：Japan  

  • α+β域焼結によるMIM製Ti-6Al-4Vの疲労強度向上

    工藤　健太郎

    第30回　射出成形技術・評価研究会  2017.10 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • Development of Super High Performance Injection Molded Ti Alloy Compacts International conference

    H. MIURA, K. KUDO, T. OSADA, K. SHINAGAWA, Y. ITOH

    2017.11 

    　More details

    Event date： 2019.6

    Language：English  

    Country：Japan  

  • The influence of alpha plus beta region sintering on the mechanical properties of injection molded Ti-6Al-4V compacts International conference

    K. KUDO, T. OSADA, K. SHINAGAWA, H. MIURA

    2017.11 

    　More details

    Event date： 2019.6

    Language：English  

    Country：Japan  

  • 磁性微粒子鎖配向型3Dプリンティング法による磁場駆動アクチュエータの開発

    小豆澤 成治, 徳丸 和樹, 工藤 健太郎, 品川 一成, 津守 不二夫

    日本機械学会 九州支部 第71期総会・講演会  2018.3 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • 外部磁場駆動型人工繊毛による3次元的な繊毛運動の設計

    丸目 隆真, 工藤 健太郎, 品川 一成, 津守 不二夫

    日本機械学会 九州支部 第71期総会・講演会  2018.3 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • 不均一粉末充填構造を持つマイクロ成形体の焼結解析

    山田 拓也, 工藤 健太郎, 津守 不二夫, 品川 一成

    日本機械学会 九州支部 第71期総会・講演会  2018.3 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • レーザ衝撃波によるセラミック粉末の常温固化に向けた堆積パターニング

    神野 謙吾, 工藤 健太郎, 品川 一成, 津守 不二夫

    日本機械学会 九州支部 第71期総会・講演会  2018.3 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • 積層インプリントアルミナ成形体のスケールによる材料変形への影響

    米倉 和啓, 徳丸 和樹, 工藤 健太郎, 品川 一成, 津守 不二夫

    日本機械学会 九州支部 第71期総会・講演会  2018.3 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • セラミック平板の焼結変形に及ぼす寸法効果の解析的検討

    安永 大輝, 工藤 健太郎, 津守 不二夫, 品川 一成

    日本機械学会 九州支部 第71期総会・講演会  2018.3 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • セラミック板状粒子の配向挙動に及ぼす異周速圧延の効果

    小家石 匠, 工藤 健太郎, 津守 不二夫, 品川 一成

    日本機械学会 九州支部 第71期総会・講演会  2018.3 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • 異周速粉末圧延におけるセラミック板状粒子配向挙動の粒子配向モデルによる検討

    小家石 匠，工藤 健太郎，品川 一成，馮 旗

    第26回機械材料・材料加工技術講演会  2018.11 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • 成形体寸法および摩擦がセラミック平板の焼結変形に及ぼす影響の解析的検討

    安永 大輝，工藤 健太郎，品川 一成，古藤 野枝，大西 宏司

    第26回機械材料・材料加工技術講演会  2018.11 

    　More details

    Event date： 2019.6

    Language：Japanese  

    Country：Japan  

  • Ti合金MIM材の高疲労強度化

    工藤　健太郎

    第16回　MIM懇話会  2018.11 

    　More details

    Event date： 2018.11

    Language：Japanese  

    Country：Japan  

  • Ti-6Al-4V MIM焼結体の疲労強度に対する結晶粒径および気孔径の影響度評価

    工藤　健太郎，　品川　一成，　三浦　秀士

    日本機械学会 2018年度年次大会  2018.9 

    　More details

    Event date： 2018.9

    Language：Japanese   Presentation type：Oral presentation (general)  

    Country：Japan  

  • MIM製Ti-6AL-4V合金の疲労強度の向上

    工藤　健太郎，　品川　一成，　三浦　秀士

    第23回　焼結研究会  2018.7 

    　More details

    Event date： 2018.7

    Language：Japanese  

    Country：Japan  

  • The Effect of Grain Size and Pore Size on the High Cycle Fatigue Strength of Injection Molded Ti-6Al-4V Compacts International conference

    Kentaro Kudo, Kazunari Shinagawa, Hideshi Miura

    2018 International Conference on Powder Metallurgy and Particulate Materials. POWDERMET2018  2018.6 

    　More details

    Event date： 2018.6

    Language：English   Presentation type：Oral presentation (general)  

    Country：United States  

  • MIM製Ti-6Al-4V合金の高サイクル疲労特性に及ぼす結晶粒径および気孔径の影響

    工藤健太郎，　品川　一成，　三浦　秀士

    日本金属学会・日本鉄鋼協会中国四国支部　第64回材質制御研究会　「粉末プロセスを利用した高性能材料の創製」  2018.6 

    　More details

    Event date： 2018.6

    Language：Japanese  

    Country：Japan  

  • Ti-6Al-4V MIM材の機械的特性に及ぼすMo,B両元素添加の影響

    工藤　健太郎

    第22回　焼結研究会  2017.8 

    　More details

    Event date： 2017.8

    Language：Japanese  

    Country：Japan  

  • Reaction Sintering of SiC by Direct Laser Forming Technology International conference

    H. MIURA, K. KUDO, S. SUEHIRO, T. KIMURA

    2017.11 

    　More details

    Event date： 2017.6 - 2019.6

    Language：Japanese  

    Country：Japan  

  • Ti-6Al-4V MIM材の強靭化に及ぼすMo，B両元素添加の影響

    工藤 健太郎，長田 稔子，品川 一成，三浦 秀士

    粉体粉末冶金大会　平成29年度春季大会（第119回講演大会）  2017.6 

    　More details

    Event date： 2017.5 - 2017.6

    Language：Japanese  

    Country：Japan  

  • Control the deformation of MIM parts by the powder size distribution

    Toshiko Osada, Kentaro Kudo, Ryuichi Hashikawa, Fujio Tsumori, Hideshi Miura

    World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016  2016.1 

    　More details

    Event date： 2016.10

    Language：English  

    Country：Germany  

  • Effect of grain size on the fatigue properties of injection moulded Ti-6Al-4V compacts

    Kentaro Kudo, Hiroyoshi Ishimitsu, Jungho Choe, Toshiko Osada, Hideshi Miura, Kazunari Shinagawa

    World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016  2016.1 

    　More details

    Event date： 2016.10

    Language：English  

    Country：Germany  

  • MIMによるTI合金の高疲労強度改善に向けて

    工藤　健太郎

    第21回　焼結研究会  2016.8 

    　More details

    Event date： 2016.8

    Language：Japanese  

    Country：Japan  

  • Improvement of fatigue strength for titanium alloy compacts by MIM

    Choe Jungho, Toshiko Osada, Kentaro Kudo, Fujio Tsumori, Hideshi Miura

    2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015  2015 

    　More details

    Event date： 2015.5

    Language：English  

    Country：United States  

  • Effect of microstructure on the rolling contact fatigue strength of 4600 steel P/M compacts

    Terukazu Tokuoka, Yoshitomo Nakahara, Kentaro Kudo, Takao Nishioka, Hideshi Miura

    World Powder Metallurgy Congress and Exhibition, World PM 2010  2010.1 

    　More details

    Event date： 2010.10

    Language：English  

    Country：Italy  

▼display all

MISC

  • 金属粉末射出成形Ti-6Al-4V合金の高疲労強度化とその支配因子の解明 Reviewed

    工藤 健太郎, 品川 一成, 三浦 秀士

    粉体および粉末冶金   2023.7

    　More details

    Language：Japanese   Publishing type：Article, review, commentary, editorial, etc. (scientific journal)  

  • MIMにおける技術動向とこれからの方向性（特集2017年金型・成形技術の展望と方向性）

    長田　稔子，　工藤　健太郎，　三浦　秀士

    型技術 Die and mould technology: 金型の総合技術史，日刊工業新聞社　32 (1), pp. 43-47   2017.1

    　More details

    Language：Japanese   Publishing type：Article, review, commentary, editorial, etc. (scientific journal)  

Professional Memberships

  • The Japan Society of Mechanical Engineers

  • Japan Society of Powder and Powder Metallurgy

  • The Japan Society for Technology of Plasticity

  • The Iron and Steel Institute of Japan

Committee Memberships

  • 日本塑性加工学会　九州支部　若手の会   リーダー  

    2021.6 - 2023.6   

  • 粉体粉末冶金協会   参事   Domestic

    2020.6 - 2022.6   

  • Steering committee member   Domestic

    2020.4 - 2022.3   

  • 日本塑性加工学会　編集委員会   編集委員   Domestic

    2020.4 - 2022.3   

  • 日本塑性加工学会　九州支部　若手の会   メンバー  

    2018.10 - 2019.6   

Academic Activities

  • 運営委員

    粉体粉末冶金協会　2020年度秋季大会  2020.10 - 2020.1

    　More details

    Type：Competition, symposium, etc. 

  • 日本塑性加工学会会報誌　ぷらすとす

    2020.4 - 2022.3

    　More details

    Type：Academic society, research group, etc. 

  • 座長

    日本機械学会九州支部　第71期総会・講演会  （ 九州大学 ） 2018.3

    　More details

    Type：Competition, symposium, etc. 

Research Projects

  • 国際学会派遣支援

    2016

    平成28年度研究活動基礎支援制度

    　 More details

    Authorship：Principal investigator  Grant type：On-campus funds, funds, etc.

  • 異種金属混合粉末の焼結挙動モデル化と焼結変形－組織形成ハイブリッド解析法の拡張

    Grant number：19H02480 

    品川 一成, 工藤 健太郎

    　 More details

    Grant type：Scientific research funding

    合金部品を製造する方法のひとつとして，各金属粉末を混合，成形し，焼結する方法がある．この方法はコスト削減や部品の材質改善に有効であるが，焼結中の元素の拡散や微細構造の変化は複雑であり，材料加工プロセスとして不明の点も多い．申請者はこれまで粉体が焼結していく過程を解析する手法を開発してきたが，これをさらに拡張し，元素拡散とそれによる微細構造変化を扱えるようにする．合金部品の焼結プロセスに適用可能な計算手法を新たに構築することで，異種金属の混合粉末の焼結や合金化の過程を明らかにするとともに，焼結合金部品の寸法形状や微細構造の予測，さらにはそれらの制御を可能とする手法を確立する．

    CiNii Research

Class subject

  • 機械工作実習 II（B-Ⅱ）

    2023.10 - 2023.12   Fall quarter

  • 機械工作実習 I（B-Ⅱ）

    2023.10 - 2023.12   Fall quarter

  • 機械工学実験第一

    2023.4 - 2023.9   First semester

  • 機械工作実習

    2023.4 - 2023.9   First semester

  • 機械工作実習 II（B-Ⅱ）

    2022.10 - 2022.12   Fall quarter

  • 機械工作実習 I（B-Ⅱ）

    2022.10 - 2022.12   Fall quarter

  • 機械工作実習

    2022.4 - 2022.9   First semester

  • 機械工学実験第一

    2022.4 - 2022.9   First semester

  • 機械工作実習 II（B-Ⅱ）

    2021.12 - 2022.2   Winter quarter

  • 機械工作実習 I（B-Ⅱ）

    2021.10 - 2021.12   Fall quarter

  • 機械工作実習

    2021.4 - 2021.9   First semester

  • 機械工学実験第一

    2021.4 - 2021.9   First semester

  • 機械工作実習

    2020.12 - 2021.2   Winter quarter

  • 機械工作実習

    2020.10 - 2020.12   Fall quarter

  • 機械工作実習

    2020.4 - 2020.9   First semester

  • 機械工学実験第一

    2020.4 - 2020.9   First semester

  • 機械工作実習Ⅱ（B-Ⅱ）

    2019.12 - 2020.2   Winter quarter

  • 機械工作実習Ⅰ（B-Ⅱ）

    2019.10 - 2019.12   Fall quarter

  • 機械工作実習

    2019.4 - 2019.9   First semester

  • 機械工学実験第一

    2019.4 - 2019.9   First semester

  • 機械工作実習

    2018.10 - 2019.3   Second semester

  • 機械工作実習Ⅱ（B2）

    2024.12 - 2025.2   Winter quarter

  • 空間表現実習Ⅰ

    2024.10 - 2025.3   Second semester

  • 機械工作実習Ⅰ（B2）

    2024.10 - 2024.12   Fall quarter

▼display all

FD Participation

  • 2021.8   Role：Participation   Title：部門FD（科研費関連）

    Organizer：[Undergraduate school/graduate school/graduate faculty]

  • 2020.5   Role：Participation   Title：オンライン講義について

    Organizer：Undergraduate school department

  • 2020.4   Role：Participation   Title：Moodleを利用したe-Learning実例報告

    Organizer：[Undergraduate school/graduate school/graduate faculty]

  • 2019.11   Role：Participation   Title：外為法に基づく安全保障輸出管理

    Organizer：Undergraduate school department

  • 2019.6   Title：若手向け科研申請に関する事例紹介

    Organizer：Undergraduate school department

  • 2018.12   Title：～アンガーマネジメント～　上手に怒る、伝わる叱り方

    Organizer：Undergraduate school department

▼display all

Other educational activity and Special note

  • 2021  Special Affairs 

  • 2020  Special Affairs 

  • 2019  Special Affairs