The 21st Annual Congress of the International Society for Technology in Arthroplasty 最優秀ポスター賞

2008.10   ISTA2008において最優秀ポスター賞に選出された．受賞論文名は Round tibial post can reduce contact stress in the post-cam structure in the posterior stabilized total knee arthroplasty

Best poster prize at 4th ESIS TC4 Conference

2005.9   ESIS TC4 Conference Committee  

日本材料学会衝撃部門委員会２００４年度奨励賞

2005.3   日本材料学会衝撃部門委員会   高分子材料の衝撃破壊挙動に関するこれまでの研究成果が認められ，今後の活躍が期待される若手研究者として奨励賞を受賞した．

日本実験力学会2004年度技術賞

2004.7   日本実験力学会   モアレ干渉法を用いた電子デバイスの熱変形解析で，2004年度の日本実験力学会の技術賞を受賞した．

日本複合材料学会1997年度論文賞受賞

1998.5   日本複合材料学会   論文「高速変位計測装置を用いたFRP積層板の動的層間破壊靭性の測定」が，1997年度に日本複合材料学会誌に発表された最も優れた論文として評価された

Effects of hysteresis on the dynamic deformation of artificial polymeric heart valve Invited Reviewed International journal

#S. H. Hisyam, M. Todo

Prosthhesis   2022.9

Nonlinear active stress – principal strain relation during pulsation of human iPS cell derived cardiomyocyte sheet Reviewed International journal

165   2022.2

Deformation mechanism of porous composite sandwich beam for orthopaedical application under three-point bending Reviewed International journal

F. Hazwani and M. Todo

Composite Structures   281   2022.2

Prediction of Bone Mineral Density (BMD) Adaptation in Pelvis-Femur Model with Hip Arthroplasties Reviewed International journal

A.H. Abdullah and M. Todo

Journal of Functional Biomaterials   12 ( 3 )   2021.9

Improvement of mechanical strength of tissue engineering scaffold due to the temperature control of polymer blend solution Reviewed International journal

A. I. Pangesty and M. Todo

Journal of Functional Biomaterials   12 ( 3 )   2021.8

Fluid-structural interaction simulation of artificial heart valve considering open state of cardiac cycle Reviewed International journal

S. H. Marwan and M. Todo

Journal of Biotechnology and Biomedicine   4   124 - 131   2021.7

Effects of stem design on the mechanical behavior of femur with total hip arthroplasty Reviewed International journal

Sh. Wu and M. Todo

International Journal of Orthopedics and Rehabilitation   8   1 - 7   2021.7

Biomechanical analysis of left ventricle considering myocardial infraction and regenerative therapy using dynamic finite element method Reviewed International journal

S. H. Marwan and M. Todo

Journal of Biotechnology and Biomedicine   4 ( 2 )   10 - 25   2021.6

Characterization of bending behavior of hydroxyapatite/biopolymer porous composite beams Reviewed International journal

F. Hazwani and M. Todo

Composite Communications   25   2021.6

Risk assessment of vertebral compressive fracture using bone mass index and strength predicted by computed tomography image based finite element analysis Reviewed International journal

Sh. Wu, M. Todo, D. Umebayashi, Y. Yamamoto

Clinical Biomechanics   85   2021.5

Development of cylindrical microfibrous scaffold using melt-spinning method for vascular engineering Reviewed International journal

#A. I. Pangesty, M. Todo

Materials Letters   228   334 - 338   2018.9

Analysis of principal stress projection in femur with total hip arthroplasty using CT-image based finite element method Reviewed International journal

#K. Fukuoka, M. Todo

International Archives of Orthopedic Surgery   1 ( 1 )   1 - 10   2018.9

Biomechanical analysis of femur with THA and RHA implants using CT-image based finite element method Reviewed International journal

#K. Fukuoka, M. Todo

Journal of Orthopaedics and Sports Medicine   2018.6

Effect of bearing mobility on the kinetics performance of TKA during deep flexion: A computational simulation Reviewed International journal

M.A. Mohd Afzan, M. Todo, R. Nagamie, S. Hirokawa

Applied Mechanics and Materials   393   899 - 906   2013.10

Biomechanical effect of implantation of chitosan/MWNTs reinforced scaffold into damaged femur Reviewed International journal

Todo Mitsugu, S. Hwang

Journal of Novel Carbon Resource Science   7   1 - 6   2013.2

Development and characterization of poly(-caprolactone) reinforced porous hydroxyapatite for bone tissue engineering Reviewed International journal

529-530   447 - 452   2013.1

Characterization of mode I fracture and morphological properties of PLLA blends with addition of lysine triisocyanate Reviewed International journal

Todo Mitsugu, Vilay Vannaladsaysy

Journal of Solid Mechanics and Materials Engineering   6 ( 4 )   314 - 422   2012.11

β-TCP複合系scaffoldの圧縮力学特性に及ぼす間葉系幹細胞培養の影響 Reviewed

東藤 貢, 荒平高章

臨床バイオメカニクス   33   237 - 244   2012.10

多孔質バイオセラミックス人工骨の圧縮力学特性に及ぼすコラーゲンコーティングの影響 Reviewed

東藤 貢, 荒平高章

粉体および粉末冶金   59 ( 7 )   421 - 424   2012.10

A comparative biomechanical study of bone ingrowth in two porous hydroxyapatite bioceramics Reviewed International journal

Todo Mitsugu, L.M. Ren, Takaaki Arahira

81 - 88   2012.8

Biomechanical evaluation of porous bioactive ceramics after implantation: micro CT-based three-dimensional finite element analysis Reviewed International journal

Li-Mei Ren, Takaaki Arahira, Mitsugu Todo, Hideki Yoshikawa and Akira Myoui

Journal of Materials Science: Materials in Medicine   23   2012.2

Compressive mechanical properties and deformation behavior of porous polymer blends of poly(e-caprolactone) and poly(L-lactic acid) Reviewed International journal

J.E. Park and M. Todo

Journal of Materials Science   46   2011.10

多孔質バイオセラミックスの力学特性に及ぼす骨組織再生の影響 Reviewed

荒平高章，東藤貢，名井陽，吉川秀樹

臨床バイオメカニクス   32   2011.10

バーチャル膝シミュレータの屈曲動作に及ぼす筋肉モデルの影響 Reviewed

東藤貢，大野充孝，日垣秀彦，三浦裕正，長嶺隆二

臨床バイオメカニクス   32   2011.10

有限要素法による表面置換型人工関節置換の応力解析 Reviewed

東藤貢，北村英輔，藤井政徳，佐藤太志，中島康晴，岩本幸英

臨床バイオメカニクス   32   2011.10

Effect of annealing on the mechanical properties of PLA/PCL and PLA/PCL/LTI polymer blends Reviewed International journal

T. Takayama, M. Todo and H. Tsuji

Journal of the Mechanical Behavior of Biomedical Materials   4   2011.10

Development and characterization of reinforced poly(L-lactide) scaffolds for bone tissue Engineering Reviewed International journal

J.E. Park and M. Todo

Journal of Materials Science: Materials in Medicine   22   2011.8

Characterization of Microstructure and Mechanical Properties of Biodegradable Polymer Blends of Poly(L-lactic acid) and Poly(butylene succinate-co-ε-caprolactone) with Lysine triisocyanate Reviewed International journal

2011.5

Biomechanical interaction between porous bioactive ceramics and regenerated bone tissue Reviewed International journal

L.M. Ren, M. Todo, T. Arahira, A. Myoui

Proceedings of The 2nd International Conference on Nanomechanics & Nanocomposites   2010.10

Assessment of Mechanical Stability and Safety for Fully Edentulous Maxilla with Dental Implants Reviewed International journal

T. Arahira, M. Todo, Y. Matsushita, K. koyano

Journal of Solid Mechanics and Materials Engineering   5 ( 5 )   2010.8

股関節の応力状態に及ぼす臼蓋形成不全の影響 Reviewed

東藤　貢，北村英輔，藤井政徳，佐藤太志，中島康晴，岩本幸英

臨床バイオメカニクス   31   2010.8

バーチャル・シミュレータによる人工膝関節の応力解析 Reviewed

東藤　貢，大野充孝，日垣秀彦，三浦裕正，長嶺隆二

臨床バイオメカニクス   31   2010.8

Development of layered porous poly(L-lactide) for bone regeneration Reviewed International journal

J.E. Park and M. Todo

Journal of Materials Science   45   2010.8

Characterization of microstructure and compressive deformation behavior of reinforced porous poly(L-lactide) Reviewed International journal

J.E. Park, M. Todo

Advanced Materials Research   123-125   2010.8

Improvement of Fracture Properties of Hydroxyapatite Particle Filled Poly(L-lactide)/Poly(e-caprolactone) Biocomposites using Lysine Tri-Isocyanate Reviewed International journal

T. Takayama, M. Todo

Journal of Materials Science   45 ( 22 )   2010.7

Three-dimensional finite element analysis of overload-induced alveolar bone resorption around dental implants Reviewed International journal

L. Qian, M. Todo, Y. Matsushita, K. Koyano

Interface Oral Health Science 2009   2010.5

Effect of Copolymer on the Mechanical and Thermal Properties and Morphological Behavior of Biodegradable Poly (L-lactic acid) (PLLA) and Poly (Butylene Succinate-co-L-Lactate) (PBSL) Blends Reviewed International journal

V. Vilay, M. Mariatti, Zulkifli Ahmad, Mitsugu Todo, and K. Pasomsouk

Polymers for Advanced Technologies   2010.3

Improvement of Mechanical Properties of Hydroxyapatite Particle Filled Poly(L-lactide) Biocomposites using Lysine Tri-Isocyanate Reviewed International journal

Tetsuo Takayama and Mitsugu Todo

Journal of Materials Science   44 ( 18 )   2009.11

Effect of lysine triisocyanate on the mode I fracture behavior of polymer blend of poly(L-lactic acid) and poly(butylene succinate-co-L-lactide) Reviewed International journal

Vilay Vannaladsaysy, Mitsugu Todo, Tetsuo Takayama, Mariatti Jaafar, Ahmad Zulkifli and Korakanh Pasomsouk

Journal of Materials Science   44 ( 11 )   2009.10

Effects of implant diameter, insertion depth and loading angle on stress/strain fields in implant/jawbone system Reviewed International journal

Lihe Qian, Mitsugu Todo, Yasuyuki Matsushita and Kiyoshi Koyano

The International Journal of Oral & Maxillofacial Implants   24   2009.10

Deformation analysis of the periodontium considering the viscoelasticity of the periodontal ligament Reviewed International journal

Lihe Qian, Mitsugu Todo, Yasuyuki Morita, Yasuyuki Matsushita and Kiyoshi Koyano

Dental Materials   25   2009.10

Compressive deformation behavior of porous PLLA/PCL polymer blend Reviewed International journal

Mitsugu Todo, Joo-Eon Park, Hiroyuki Kuraoka, Jin-Woong Kim, Kentaro Taki and Masahiro Ohshima

Journal of Materials Science   44 ( 15 )   2009.10

大腿骨と人工股関節の力学的相互作用に及ぼすステム形状の影響 Reviewed

東藤　貢，中村尚平，佛淵孝夫

臨床バイオメカニクス   30   2009.8

Finite Element Analysis of Bone Resorption around Dental Implant Reviewed International journal

Lihe Qian, Mitsugu Todo, Yasuyuki Matsushita and Kiyoshi Koyano

Journal of Biomechanical Science and Engineering   4 ( 3 )   2009.8

医療用画像に基づく3次元膝関節モデルの構築と人工膝関節の応力解析への応用 Reviewed

東藤　貢，長嶺隆二，高橋祐二

臨床バイオメカニクス   30   2009.8

The effect of bimodal distribution on the mechanical properties of hydroxyapatite particle filled poly(L-lactide) composites Reviewed International journal

Tetsuo Takayama, Mitsugu Todo and Atsushi Takano

Journal of the Mechanical Behavior of Biomedical Materials   2   2009.5

PLA/PCLポリマーブレンドの衝撃力学特性に及ぼす熱処理の影響 Reviewed

東藤　貢，高山哲生

成形加工   2008.11

The effect of bimodal distribution on the mechanical properties of hydroxyapatite particle filled poly(L-lactide) composites Reviewed International journal

Tetsuo Takayama, Mitsugu Todo, Atsushi Takano

Journal of the Mechanical Behavior of Biomedical Materials   2008.10

PS型人工膝関節における繰り返し屈曲動作と脛骨インサートの塑性変形挙動について Reviewed

東藤　貢，長嶺隆二，高橋祐二

日本臨床バイオメカニクス学会誌   2008.10

Stress analysis of artificial knee joints under flexion and rotation Reviewed International journal

Mitsugu Todo, Yuji Takahashi, Ryuji Nagamine

Tribology Online   2008.9

Deformation behavior and mechanism of porous PLLA under compresion Reviewed International journal

Mitsugu Todo, Hiroyuki Kuraoka, Jinwoong Kim, Kentaro Taki, Masahiro Ohshima

Journal of Materials Science   2008.9

デンタルインプラントと下顎骨の力学的相互作用に及ぼす固定式補綴装置の材質の影響 Reviewed

入江皓平，東藤　貢，松下恭之，古谷野潔

粉体および粉末冶金   2008.8

デジタル画像相関法による歯周組織の咬合機能解析 Reviewed

森田康之，内野正和，東藤　貢，松下恭之，新川和夫，古谷野潔

粉体および粉末冶金   2008.8

ハイドロキシアパタイト微粒子分散ポリL乳酸の構造制御による破壊特性の向上 Reviewed

加川　尊，東藤　貢，竹之下康治，名井　陽

粉体および粉末冶金   2008.8

Effect of Press Processing on Fracture Behavior of HA/PLLA Biocomposite Material Reviewed International journal

M. Todo, T. Kagawa, Y. Takenoshita and A. Myoui

Journal of Solid Mechanics and Materials Engineering   2008.4

アルミナ－アルミナ人工股関節のロッキング機構損傷解析とUHMWPEライナー脱転のメカニズム Reviewed

東藤　貢，徳永政一郎，馬渡正明，佛淵孝夫

日本臨床バイオメカニクス学会誌   2007.10

Improvement of Fracture Energy of HA/PLLA Biocomposite Material due to Press Processing Reviewed International journal

M. Todo and T. Kagawa

Journal of Materials Science   2007.10

Toughening of bioabsorbable polymer blend by microstructural modification Invited Reviewed International journal

M. Todo and T. Takayama

Interface Oral Health Science 2007   2007.10

Stress Analysis of PS Type Knee Prostheses under Deep Flexion Reviewed International journal

M. Todo, R. Nagamine and S. Yamaguchi

Journal of Biomechanical Science and Engineering   2007.10

Effect of LTI Blending on Fracture Proeprties of PLA/PCL Polymer Blend Reviewed International journal

M. Todo, T. Takayama, H. Tsuji and K. Arakawa

Journal of Solid Mechanics and Materials Engineering   2007.10

PS型人工膝関節の動作状態における応力状態の解析 Reviewed

東藤　貢，長嶺隆二，山口勝太

日本臨床バイオメカニクス学会誌   2007.10

Fracture micromechanisms of bioabsorbable PLLA/PCL polymer blends Reviewed International journal

M. Todo, S.D. Park, T. Takayama and K. Arakawa

Engineering Fracture Mechanics   2007.8

Effect of Annealing on the Fracture Toughness of Poly(lactic acid) Reviewed International journal

S.-D. Park, M. Todo and K. Arakawa

Journal of Materials Science   39 ( 3 )   1113 - 1116   2004.1

Effect of annealing on fracture mechanism of biodegradable poly(lactic acid) Reviewed International journal

S.D. Park, M. Todo and K. Arakawa

Key Engineering Materials   261-263   105 - 110   2004.1

ポリ(L-乳酸)の破壊挙動に及ぼす加水分解の影響 Reviewed

東藤　貢，篠原　信之，新川　和夫，辻　秀人

高分子論文集   2003.1

Effect of Rubber Blending on the Fracture Behavior of Glass Microballoon Filled Epoxy Resin International journal

M. Todo, S. Komeda and K. Arakawa

Proceedings of the Third Japan-Korea Joint Symposium on Composite Materials   2002.10

ZrO2/Ni複合材料の変形・破壊挙動に及ぼす分散状態の影響 Reviewed

東藤　貢，新川　和夫，高橋　清，武部　博倫，森永　健次

材料   2002.1

Effects of Crystallization and Loading-rate on the Mode I Fracture Toughness of Biodegradable Poly(lactic acid) Reviewed International journal

M. Todo, N. Shinohara and K. Arakawa

Journal of Materials Science Letters   21 ( 15 )   1203 - 1206   2002.1

Loading-Rate Dependence of Mode I Fracture Behavior of Rubber-Toughened PMMA Reviewed International journal

M. Todo and K. Takahashi

Proceedings of the 10th International Conference on Fracture   2001.12

Displacement-Rate Dependence of the Bending Fracture Behavior of Interlayer-Toughened Carbon/Epoxy Composite Reviewed International journal

M. Todo and K. Takahashi

Materials Science Research International, Special Technical Publication-2   2001.1

連続繊維強化ポリアミド６のモードII層間破壊靭性に及ぼす吸湿の影響 Reviewed

東藤　貢，高橋　清

日本複合材料学会誌   2001.1

Initiation of a mode-II Interlaminar Crack from an Insert Film in the End-Notched Flexure Composite Specimen Reviewed International journal

M. Todo, P.-Y. B. Jar and K. Takahashi

Composite Science and Technology   60 ( 2 )   263 - 272   2000.1

Nonlinear Displacement Field in the Vicinity of Notch-Tip in Rubber Toughened PMMA Reviewed International journal

M. Todo, K. Arakawa and K. Takahashi

Key Engineering Materials   183-1   409 - 414   2000.1

Effects of Moisture Absorption on the Dynamic Interlaminar Fracture Toughness of Carbon/Epoxy Composites Reviewed International journal

M. Todo, T. Nakamura and K. Takahashi

Journal of Composite Materials   34 ( 8 )   630 - 648   2000.1

Strain-rate Dependence of the Tensile Fracture Behaviour of Woven-cloth Reinforced Polyamide Composites Reviewed International journal

M. Todo, K. Takahashi, Ph. Beguelin and H.H. Kausch

Composite Science and Technology   60 ( 5 )   763 - 771   2000.1

ゴム強化PMMAにおける高靭性発現のメカニズム Reviewed

東藤　貢，高橋　清，P.-Y. B. Jar，Ph. Beguelin

日本機械学会論文集（A編）   1999.1

Mode II Interlaminar Fracture Behavior of Fiber Reinforced Polyamide Composites under Static and Dynamic Loading Conditions Reviewed International journal

M. Todo, T. Nakamura and K. Takahashi

Journal of Reinforced Plastics and Composites   18 ( 15 )   1415 - 1427   1999.1

Toughening Mechanisms of Rubber Toughened PMMA Reviewed International journal

M. Todo, K. Takahashi, P.-Y. Ben Jar and Ph. Beguelin

JSME International Journal, Series A   42 ( 4 )   585 - 591   1999.1

Effect of Displacement Rate on the Mode I Fracture Behavior of Rubber Toughened PMMA Reviewed International journal

M. Todo, K. Takahashi, Ph. Beguelin and H.H. Kausch

JSME International Journal, Series A   42 ( 1 )   49 - 56   1999.1

Measurement of Dynamic Interlaminar Fracture Toughness of FRP Laminates Using Dynamic Displacement Measuring Apparatus Reviewed International journal

M. Todo, T. Nakamura, T. Mada and K. Takahashi

Advanced Composite Materials   7 ( 3 )   285 - 297   1998.1

Mechanical evaluation of revision surgery for femoral shaft nonunion initially treated with intramedullary nailing: Exchange nailing versus augmentation plating Reviewed International journal

#H. Mimata, @Y. Matsuura, @S. Yano, @S. Ohtori, M. Todo

Injury   2023.10

Development and characterization of alginate/collagen composite bioinks for bone tissue engineering Reviewed International journal

@T. Arahira, @K. Takimoto, M. Todo

Journal of Biotechnology and Biomedicine   2023.5

Comparison of physical properties and degradation of polylactic acid and polypropylene facemask layer Reviewed International journal

@M. Amirul Fakhri, @M. Mariatti, @V. Vilay, M. Todo

Fibers and Polymers   2023.2

Development and characterization of three-dimensional layered structures with gel beads for bone tissue engineering Reviewed International journal

@K. Takimoto, @T. Arahira, M. Todo

Results in Materials   2022.12

Evaluation of bone healing process after intramedullary nailing for femoral shaft fracture by quantitative computed tomography-based finite element analysis Reviewed International journal

#Hideyuki Mimata, @Y. Matsuura, @S. Yano, @S. Ohtori, M. Todo

Clinical Biomechanics   2022.6

Evaluation methodology for reoperation after intramedullary nailing for femoral shaft fracture: A quantitative computer tomography-based finite element analysis Reviewed International journal

#Hideyuki Mimata, @Y. Matsuura, @S. Yano, @S. Ohtori, M. Todo

International Journal of Orthopaedics   2022.6

Computational Analysis of Strength and Fracture Location of Different Types of Femurs under Falling Condition Using CT-Image Based Finite Element Method Reviewed International journal

#Zaw Linn Htun, M. Todo, @M. Tsukamoto, @T. Yamamoto, @M. Mawatari

International Journal of Orthopaedic   2022.6

Computational Analysis of Femoral Strength and Fracture Location of Normal, Osteoarthritis and Avascular Necrosis Femurs Using CT-Image Based Finite Element Method Reviewed International journal

#Zaw Linn Htun, M. Todo, @M. Tsukamoto, @T. Yamamoto, @M. Mawatari

American Journal of Orthopaedic Research and Reviews   2022.6

Changes in the dielectric constant of interphase volume in Polyimide–ceramic nanocomposites: A Power Law model approach Reviewed International journal

139 ( 6 )   2022.2

Electrically, thermally, and mechanically anisotropic gels with a wide operational temperature range Reviewed International journal

V.T. Tran, Md. T. I. Mredha, Y. Lee, M. Todo, H. So, E. Jeong, W. Park and I. Jeon

Advanced Functional Materials   2021.11

Recent advancements in nonwoven bio-degradable facemasks to ameliorate the post-pandemic environmental impact Reviewed International journal

J. Khan, S.A. Momin, M. Mariatti, V. Vilay and M. Todo

Materials Research Express   8 ( 11 )   1 - 20   2021.10

Non-linear analysis of deformation behavior of HA/PLCL porous bio-composites Reviewed International journal

F. Hazwani and M. Todo

Acta Materialia Turcica   5   11 - 17   2021.9

Fracture analysis of porous bioceramics by finite element method Reviewed International journal

T. Arahira, M. Todo, A. Myoui

ICIC Express Letters Part B: Applications   12 ( 7 )   619 - 625   2021.6

Risk of bone fracture in resurfacing hip arthroplasty at varus and valgus implant placements Reviewed International journal

Nor A. Bin Nor Izmin, F. Hazwani, M.Todo, Abdul H. Abdullah

International Journal of Technology   2020.11

Effect of chain extender on morphology and tensile properties of poly(L-lactic acid)/poly(butylene succinate-co-L-lactate) blends Reviewed International journal

M. Nishida, X. Liu, S. Furuya, M. Nishida, T. Takayama, M. Todo

Materials Today Communications   2020.11

Biomechanical analysis of femur with THA and RHA implants using CT-image based finite element method Reviewed International journal

M. Todo, K. Fukuoka

Journal of Orthopaedics and Sports Medicine   2020.6

Development and mechanical characterization of bilayer tubular scaffolds for vascular tissue engineering applications Reviewed International journal

T. T. Tam, Z. A. Abdul Hamid, L.N. Thien, K.Y. Cheong, M. Todo

Journal of Materials Science   2020.6

Pelvic tilt on joint stress distribution in hip dysplasia: A finite element analysis Invited Reviewed International journal

K. Kitamura, M. Fujii, T. Utsunomiya, M. Iwamoto, S. Ikemura, S. Hamai, G. Motomura, M. Todo, Y. Nakashima

Clinical Biomechanics   2020.6

Fracture characterization of calcium phosphate mcirobeads filled poly(L-lactide) composite material Reviewed International journal

J. Duckworth, T. Arahira, M. Todo

Journal of Materials Science   2020.6

Effects of culture conditions on the mechanical and biological properties of engineered cartilage constructed with collagen hybrid scaffold and human mesenchymal stem cells Reviewed International journal

Y. Nakamuta, T. Arahira, M. Todo

Journal of Materials Science: Materials in Medicine   2019.11

Prediction of bone damage formation in resurfacing hip arthroplasty Reviewed International journal

Nor Aiman Nor Izmin, Mitsugu Todo, Abdul Halim Abdullah

International Journal of Engineering and Advanced Technology   2019.10

Adhesion, proliferation and differentiation of human mesenchymal stem cell on chitosan/collagen composite scaffold Reviewed International journal

Md A. Kafi, Mst. Kh. Aktar, Y. Phanny, M. Todo

Journal of Materials Science: Materials in Medicine   2019.10

Biomechanical study of implant treatment for maxillas with different bone quality Reviewed International journal

T. Arahira, M. Todo

Dental Research and Oral Health   2 ( 2 )   3 - 16   2019.9

Engineered chitosan for improved 3D tissue growth through Paxillin-FAK-ERK activation Reviewed International journal

Md A. Kafi, Kh. Aktar, M. Todo, R. Dahiya

Regenerative Biomaterials   2019.8

Development of novel collagen scaffolds with different bioceramic particles for bone tissue engineering Reviewed International journal

T. Arahira, M.Todo

Composites Communications   16   30 - 32   2019.7

Biomechanical effects of implant materials on posterior lumbar interbody fusion: comparison of polyetheretherketone and titanium spacers using finite element analysis and considering bone density Reviewed International journal

T. Sato, I. Yonezawa, M. Todo, H. Takano, K. Kaneko

Journal of Biomedical Science and Engineering   2018.11

Biomechanical analysis of jaw bone with cyst using CT-image based finite element method Reviewed International journal

T. Arahira, M. Todo

Dental Research and Oral Health   2018.10

The effect of fibre length on cement/fibre integration and mechanical properties of a DCPD/PLCL injectable composite biomaterial Reviewed International journal

J. Duckworth, M. Todo

Journal of Biomedical and Pharmaceutical Sciences   2018.6

Development and characterization of porous hydroxyapatite scaffolds reinforced with polymeric secondary phase for bone tissue engineering Reviewed International journal

M. Todo, #Ph. Yos, T. Arahira and A. Myoui

Biomaterials and Tissue Technology   2 ( 1 )   1 - 8   2018.5

Use of nonlinear finite element analysis of bone density to investigate the biomechanical effect in the bone around intervertebral cages in posterior lumbar interbody fusion Reviewed International journal

T. Sato, I. Yonezawa, M. Todo, H. Takano, K. Kaneko

Journal of Biomedical Science and Engineering   2017.10

Highly sensitive and selective detection of Bis-phenol A based on hydroxyapatite decorated reduced graphene oxide nanocomposites Reviewed International journal

M.K. Alam, M.M. Rahman, A. Elzwawy, S.R. Torati, M.S. Islam, M. Todo

Electrochemica Acta   2017.10

Prediction of damage formation in hip arthroplasties by finite element analysis using computed tomography images Reviewed International journal

A.H. Abdullah, M. Todo, Y. Nakashima

Medical Engineering and Physics   2017.10

Development and characterization of hybrid tubular structure of PLCL porous scaffold with hMSCs/ECs cell sheet Reviewed International journal

#A. I. Pangesty, T. Arahira, @M. Todo

Journal of Materials Science: Materials in Medicine   2017.10

Mechanics of posterior stabilized total knee arthroplasty during daily activities in relation to prosthesis condylar and post-cam design: A finite element study Reviewed International journal

#M. A. bin Mohd Anuar, @M. Todo

Journal of Mechanical Engineering   2017.10

Biomechanical study of vertebral compression fracture using finite element analysis Reviewed International journal

H. Takano, I. Yonezawa, M. Todo, M. H. Mazlan, T. sato, K. Kaneko

Journal of Applied Mathematics and Physics   2017.10

Preparation and characterization of porous tubular scaffold made of PCL/PLCL blends for vascular tissue engineering Reviewed International journal

#A. Pangesty, @M. Todo

Journal of Mechanical Engineering   2017.8

Biomechanical alteration of stress and strain distribution associated with vertebral fracture Reviewed International journal

M. H. Mazlan, M. Todo, I. Yonezawa, H. Takano

Journal of Mechanical Engineering   2017.8

Development and Characterization of Gear Shape Porous Scaffolds using 3D Printing Technology Reviewed International journal

#M. H. Jalil, @M. Todo

International Journal of Bioscience, Biochemistry and Bioinformatic   2017.8

Biomechanical Comparison of Polymeric Spinal Cages using CT Based Finite Element Method Reviewed International journal

#M. H. Jalil, #M. H. Mazlan, @M. Todo

International Journal of Bioscience, Biochemistry and Bioinformatic   2017.8

Improvement of Collagen Gel/Sponge Composite Scaffold by Gel Wrapping for Cartilage Tissue Engineering Reviewed International journal

#Y. Nakamuta, @M. Todo, T. Arahira

International Journal of Bioscience, Biochemistry and Bioinformatic   2017.8

Tissue reaction to a novel bone substitute material fabricated with biodegradable polymer-calcium phosphate nanoparticle composite Reviewed International journal

H. Shimizu, Y. Jinno, Y. Ayukawa, I. Atsuta, T. Arahira, M. Todo, K. Koyano

Implant Dentistry   2016.10

A theoretical model to predict tensile deformation behavior of balloon catheter Reviewed International journal

M. Todo, K. Yoshiya, T. Matsumoto

Journal of the Mechanical Behavior of Biomedical Materials   2016.9

Characterization of tensile mechanical behavior of MSCs/PLCL hybrid layered sheet Reviewed International journal

A. I. Intan, T. Arahira, M. Todo

Journal of Functional Biomaterials   2016.9

Biomechanical study of the effects of balloon kyphoplasty on the adjacent vertebrae Invited Reviewed International journal

H. Takano, I. Yonezawa, M. Todo, Md. H. Mazlan, T. Sato, K. Kaneko

Journal of Biomedical Science and Engineering   2016.8

Variation of mechanical behavior of b-TCP/collagen two phase composite scaffold with mesenchymal stem cell in vitro Reviewed International journal

T. Arahira, Mitsugu TODO

Journal of Mechanical Behavior of Biomedical Materials   61   464 - 474   2016.8

Predisposing factors for orthodontic mini-implant failure defined by bone strains in patient-specific finite element models Invited Reviewed International journal

M. H. Albogha, T. Kitahara, M. Todo, I. Takahashi

Annals of Biomedical Engineering   2016.8

Effects of sintering temperature on the compressive mechanical properties of collagen/hydroxyapatite composite scaffolds for bone tissue engineering Reviewed International journal

Md. Shariful. Islam, Mitsugu TODO

Materials Letters   173   231 - 234   2016.6

Maximum principal strain as a criterion for prediction of orthodontic mini-implants failure in subject-specific finite element models Reviewed International journal

M.H. Albogha, T. Kitahara, M. Todo, H. Hyakutake, I. Takahashi

Angle Orthodontist   2016.5

骨の力学解析のための理論とモデリングの基礎 Invited Reviewed

東藤　貢

日本整形外科学会雑誌   第90巻 ( 第3号 )   S1023 - S1023   2016.5

Effects of chain extender on dynamic properties of PLLA/PBSL blends Reviewed International journal

M. Nishida, Y. Takeuchi, S. Furuya, M. Todo

Dynamic Behavior of Materials   2016.5

Effect of cage insertion Orientation on stress profiles and subsidence phenomenon in posterior lumbar inerbody fusion Reviewed International journal

Muhammad Hazli Mazlan, Mitsugu TODO, Hiromitsu Takano, Ikuho Yonezawa

Journal of Medical and Bioengineering   vol. 5 ( No. 2 )   pp. 93 - pp. 97   2016.4

ヒト間葉系幹細胞を播種したコラーゲンゲル・スポンジ複合系scaffoldの圧縮力学特性 Reviewed

中牟田　侑昌, 荒平　高章, 東藤　貢

臨床バイオメカニクス   pp. 207 - pp. 212   2015.11

Improved Mechanical Properties of PVA-Chitosan Polymeric Porous Scaffolds for Tissue Engineering Reviewed International journal

Md. Shariful Islam1, Mitsugu TODO

American Journal of Clinical and Experimental Medicine   Vol. 3 ( Issue. 5 )   pp. 268 - pp. 274   2015.9

Biomechanical Effects of Balloon Kyphoplasty on Treated and adjacent non-treated vertebral bodies: Pre and Post-operative Evaluation Reviewed International journal

Muhammad Hazli Mazlan, Mitsugu TODO, Hiromitsu Takano, Ikuho Yonezawa

ARPN Journal of Engineering and Applied Sciences   Vol. 10 ( No. 15 )   pp. 6196 - pp. 6202   2015.8

Neck fracture of femoral stems with a sharp slot at the neck: biomechanical analysis Invited Reviewed International journal

Kensei Yoshimoto, Yasuharu Nakashima, Akihiro Nakamura, Taro Mawatari, Mitsugu TODO, Daisuke Hara, Yukihide Iwamoto

Orthopaedic Science   Vol. 20 ( Issue. 5 )   pp. 881 - pp. 887   2015.7

Effects of Hip Arthroplasties on Bone Adaptation in Lower Limbs: A Computational Study International journal

Abdul Halim Abdullah, Mitsugu TODO

Journal of Biosciences and Medicines   pp. 1 - pp. 7   2015.4

Stress evaluation of lower limbs with hip osteoarthritis and hip arthroplasty International journal

A.H. Abdullah, Mitsugu TODO

Journal of Medical and Bioengineering   Vol. 4 ( No. 2 )   pp. 100 - pp. 104   2015.4

Effects of total hip arthroplasty on stress adaptation and bone remodeling in lower limbs International journal

A.H. Abdullah, Mitsugu TODO

Evergreen   Vol. 2 ( No. 1 )   pp. 6 - pp. 11   2015.3

Development and characterization of a novel porous b-TCP scaffold with a three-dimensional PLLA network structure for use in bone tissue engineering International journal

Takaaki Arahira, Michito Maruta, Mitsugu TODO

Materials Letters   152   148 - 150   2015.3

Prediction of damage formation in total hip arthroplasty using finite element method

Abdul Halim ABDULLAH, Mitsugu TODO

Vol. 36 ( No. 2 )   pp. 6 - pp. 9   2015.2

Effects of osteoblast-like cell seeding on the mechanical properties of porous composite scaffolds International journal

Takaaki Arahira, Mitsugu TODO

Advanced Composite Materials   pp. 1 - pp. 12   2015.2

Computational model for mechanics of total knee replacement: effect of tibial rotation during deep flexion in relation to post-cam design International journal

M.A. Mohd Afzan, Mitsugu TODO, Ryuji Nagamine

International Journal of Bioscience, Biochemistry and Bioinformatics   Vol. 4 ( No. 6 )   pp. 428 - pp. 437   2014.11

Effects of proliferation and differentiation of mesenchymal stem cells on compressive mechanical behavior of collagen/-TCP composite scaffold International journal

Vol. 39   pp. 218 - pp. 230   2014.11

Effect of sintering time on microstructure and mechanical properties of hydroxyapatite porous materials for bone tissue engineering application International journal

Phanny Yos, Mitsugu TODO

Evergreen   1 ( 2 )   1 - 4   2014.9

Tensile properties of poly(L-lactic) acid (PLLA) blends International journal

N. Eawwiboonthanakit, M. Jaafar, Z. A. A. Hamid, Mitsugu TODO, B. Lila

Advanced Materials Research   Volume 1024   179 - 183   2014.8

Dynamic finite element analysis of mobile bearing type knee prosthesis under deep flexional motion International journal

M.A. Mohd Afzan, Mitsugu TODO, Ryuji Nagamine, Shunji Hirokawa

The Scientific World Journal   2014.7

Evaluation of deformation distribution in alveolar bone model around dental implant with experimental and numerical approaches

LM REN, Yasuyuki Morita, Mitsugu TODO

Journal of the Japanese Society for Experimental Mechanics   Vol. 14 ( No. Special Issue )   pp. s251 - pp. s256   2014.7

Risk of femoral bone fractures in hip arthroplasties during sideway falls International journal

A.H. Abdullah, Mitsugu TODO, Yasuharu Nakashima, Yukihide Iwamoto

International Journal of Applied Physics and Mathematics   Vol. 4 ( No. 4 )   286 - 289   2014.7

Finite element analysis of osteoporotic vertebrae with first lumber (L1) vertebral compression fracture International journal

M. H. Mazlan, Mitsugu TODO, Hiromitsu Takano, Ikuho Yonezawa

International Journal of Applied Physics and Mathematics   Vol. 4 ( No. 4 )   pp. 267 - pp. 274   2014.7

The effect of malrotation of tibial component of total knee arthroplasty on tibial insert during high flexion using finite element analysis International journal

Kei Osano, Ryuji Nagamine, Mitsugu TODO, Makoto Kawasaki

The Scientific World Journal   2014.5

Development and Characterization of CNT/Biopolymer Electrodes for Bio-fuel Cell International journal

Mitsugu TODO, K. Yamauchi, T. Arahira

IFMBE Proceedings   Vol. 43   pp. 865 - pp. 867   2014.2

Proliferation Behavior of Mesenchymal Stem Cells in Peptide Functionalized Chitosan Scaffolds International journal

M.A. Kafi, Y. Phanny, Y. Nakamuta, Mitsugu TODO

IFMBE Proceedings   43   279 - 282   2014.1

Development and Characterization of Bioceramic/Polymer Composite Scaffold with Drug Release Function for Bone Tissue Engineering International journal

Mitsugu TODO, N. Yamada, T. Arahira, Y. Ayukawa, K. Koyano

The 15th International Conference on Biomedical Engineering   43   722 - 725   2014.1

Mechanical Variation and Proliferation Behavior in Hydroxyapatite Based Scaffolds with Mesenchymal Stem Cells International journal

P. Yos, M.A. Kafi, Mitsugu TODO

IFMBE Proceedings   43   283 - 286   2014.1

Particle size distribution effects on physical properties of injection molded HA/PLA composites Reviewed International journal

T. Takayama, K. Uchiumi, H. Ito, T. Kawai, M. Todo

Advanced Composite Materials   22   327 - 337   2013.11

Improvement of compressive properties of porous HA scaffold by introducing PCL secondary phase International journal

Phanny Yos, Mitsugu TODO

Advanced Materials Research   Vol. 858   pp. 96 - pp. 102   2013.11

Characterization of the microstructure and mode I fracture property of biodegradable poly(L-lactic acid) and poly(e-caprolactone) polymer blends with the additive lysine triisocyanate Reviewed International journal

V. Vannaladsaysy, M. Mariatti, M. Todo

Polymer-Plastic Technology and Engineering   52   768 - 773   2013.10

Late failure of annealed highly cross-linked polyethylene acetabular liner Reviewed International journal

D. Hara, Y Nakashima, T. Yamamoto, S. Higashihara, M. Todo, M. Hirata, M. Akiyama, Y. Iwamoto

Journal of The Mechanical Behavior of Biomedical Materials   28   206 - 212   2013.10

Compressive deformation behavior of bioabsorbable porous layered composite materials ofr articular tissue eigineering Reviewed International journal

S. Hwang, M. Todo

Journal of Solid Mechanics and Materials Engineering   7 ( 2 )   1 - 10   2013.6

Effect of Copolymer on the Mechanical and Thermal Properties and Morphological Behavior of Biodegradable Poly (L-lactic acid) (PLLA) and Poly (Butylene Succinate-co-L-Lactate) (PBSL) Blends Reviewed International journal

V. Vilay, M. Mariatti, Zulkifli Ahmad, M. Todo, and K. Pasomsouk

Polymers for Advanced Technologies   22   2011.10

Changes in the crystallinity and mechanical properties of poly(L-lactic acid)/poly(butylene succinate-co-L-lactate) blend with annealing process Reviewed International journal

P.M. Chou, M. Mariatti, A. Zulkifli and M. Todo

Polymer Bulletin   67   2011.10

Improvement of microstructures and properties of biodegradable PLLA and PCL blends compatibilized with a triblock copolymer Reviewed International journal

V. Vilay, M. Mariatti, Z. Ahmad, K. Pasomsouk, M. Todo

Materials Science and Engineering A   527 ( 26 )   2010.10

Improvement of Microstructure and Fractured Property of Poly(L-lactic acid) and Poly(butylene succinate-co-e-caprolactone) Blend Compatibilized with Lysine Triisocyanate Reviewed International journal

V. Vilay, M. Mariatti, Z. Ahmad, K. Pasomsouk, M. Todo

Engineering Letters   18 ( 3 )   2010.6

Dental occlusal deformation analysis of porcine mandibular periodontium using digital image correlation method Reviewed International journal

Y. Morita, M. Uchino, M. Todo, L. Qian, Y. Matsushita, K. Arakawa, K. Koyano

Interface Oral Health Science 2009   2010.5

Local application of fluvastatin improves peri-implant bone quantity and mechanical property. A rodent study Reviewed International journal

Y. Moriyama, Y. Ayukawa, Y. Ogino, I. Atsuta, M. Todo, Y. Takao, K.Koyano

Acta Biomaterialia   6 ( 4 )   2010.4

The Alternation of Gene Expression Patterns around Titanium Implants Exposed to Static Lateral Load Reviewed International journal

Yasuko Moriyama, Yasunori Ayukawa, Kenichi Kabamura, Yasuyuki Matsushita, Masafumi Kihara, Yoshihiro Tsukiyama, Mitsugu Todo, Yoshihiro Takao, Kiyoshi Koyano

Journal of Biomechanical Science and Engineering   4 ( 3 )   2009.8

Displacement of Actin Filament and Actin Binding Proteins under Local Deformation Processed by Digital Image Correlation Method in a Myoblast Reviewed International journal

Takeomi Mizutani, Kenichi Doi, Yasuyuki Morita, Masakazu Uchino, Mitsugu Todo, Hisashi Haga and Kazushige Kawabata

Journal of Biomechanical Science and Engineering   4 ( 3 )   2009.8

Characterization of the mechanical and thermal properties and morphological behavior of biodegradable poly(L-lactide)/poly(-caprolactone) and poly(L-lactide)/poly(butylenes succinate-co-L-lactide) polymer blends Reviewed

114   2009.5

咬合時における生体歯周組織の荷重－変位曲線と変位・変形挙動解析 Reviewed

森田康之，東藤貢，松下恭之，新川和夫，古谷野潔

日本臨床バイオメカニクス学会誌   2008.10

咬合を模擬した押込み荷重下でのブタ下顎歯周組織の変位・変形挙動解析

森田康之，内野正和，東藤　貢，松下恭之，新川和夫，古谷野潔

実験力学   2008.10

The Effect of Hydrolysis on the Mechanical Properties of Poly(L-lactic acid) Reviewed International journal

S. Kobayashi and M. Todo

Journal of Solid Mechanics and Materials Engineering   2008.4

デジタル画像相関法を用いた咬合時における歯周組織の変位・変形様態の可視化 Reviewed

森田康之，東藤　貢，松下恭之，新川和夫，古谷野潔

日本臨床バイオメカニクス学会誌   2007.10

Effect of Fiber Surface Treatment and Fiber Loading on the Properties of Bagass Fiber-Reinforced Unsaturated Polyester Composites Reviewed International journal

V. Vilay, M. Mariatti, R. Mat Taib and M. Todo

Composite Science and Technology   2007.10

完全屈曲可能な人工膝関節の開発と評価 Reviewed

廣川俊二，東藤　貢，木口量夫，佛淵孝夫

日本臨床バイオメカニクス学会誌   2007.10

Relationship between Fracture Mechanism and Microstructure in PLA/PCL Polymer Blends Reviewed International journal

T. Takayama, M. Todo and K. Arakawa

Key Engineering Materials   2007.9

MBS樹脂の衝撃引張り破壊挙動に及ぼすゴム粒子径の効果 Reviewed

新川和夫，馬田俊雄，高橋　淳，東藤　貢，大岡　進

材料   2007.7

Visualizing displacement and deformation behavior of the periodontium under dental occlusion using a digital correlation method Reviewed International journal

Y. Morita, M. Uchino, M. Todo, Y. Matsushita, K. Arakawa and K. Koyano

Journal of Biomechanical Science and Engineering   2007.6

High-sensitivity measurement of thermal deformation in a stacked multichip package Reviewed International journal

Y. Morita, K. Arakawa and M. Todo

IEEE Transactions on Components and Packaging Technologies   2007.6

Effect of rubber particle size on the impact tensile fracture behavior of MBS resin with a bimodal particle size distribution Reviewed International journal

K. Arakawa, T. Mada, J. Takahashi, M. Todo and S. Ooka

Journal of Materials Science   2007.6

ポリマーブレンドの破壊特性と破壊メカニズム Invited Reviewed

東藤　貢

日本接着学会誌   2007.6

Effect of unidirectional drawing process on fracture behavior of poly(L-lactide) Reviewed International journal

M. Todo

Journal of Materials Science   2007.1

人工膝関節の3次元有限要素モデルの構築と計算効率に関する研究 Reviewed

東藤　貢，長嶺隆二，山口勝太，萩原世也，新川和夫

日本臨床バイオメカニクス学会誌   2006.10

In Situ Polymerization and Properties of Methyl Methacrylate-Butadiene-Styrene Resin with Bimodal Rubber Particle Size Distribution Reviewed International journal

J. Takahashi, H. Watanabe, J. Nakamoto, K. Arakawa and M. Todo

Polymer Journal   2006.10

人工膝関節のUHMWPEインサートの応力状態に及ぼす屈曲と回旋の影響 Reviewed

東藤　貢，長嶺隆二，桑野　領，萩原世也，新川和夫

日本臨床バイオメカニクス学会誌   2006.10

電子パッケージの高精度な熱変位・熱ひずみ分布の計測 Reviewed

森田康之，新川和夫，東藤　貢

電気学会論文誌C   2006.4

動的有限要素法によるSHPB式衝撃破壊じん性試験法の検討 Reviewed

東藤　貢，田中麻美，新川和夫

材料   2006.4

PLA/PCLポリマーブレンドの相構造制御と破壊特性 Reviewed

高山哲生，東藤　貢，新川和夫，辻秀人

日本複合材料学会誌   2006.4

Improvement of impact fracture properties of PLA/PCL polymer blend due to LTI addition Reviewed International journal

T. Takayama and M. Todo

Journal of Materials Science   2006.4

Effect of LTI content on impact fracture property of PLA/PCL/LTI polymer blends Reviewed International journal

T. Takayama, M. Todo, H. Tsuji and K. Arakawa

Journal of Materials Science   2006.4

Relationship between microstructure and fracture behavior of bioabsorbable HA/PLLA composites Reviewed International journal

M. Todo, S.D. Park, K. Arakawa and Y. Takenoshita

Composite Part A   2006.4

Effect of Loading-rate on fracture micromechanism of methylemethacrylate-butadiene-styrene polymer blend Reviewed International journal

M. Todo, J. Takahashi, H. Watanabe, J. Nakamoto and K. Arakawa

Polymer   2006.4

Optical inspection of interfacial thermal strains in IC composite microstructures Reviewed International journal

Y. Morita, K. Arakawa and M. Todo

Key Engineering Materials   2006.4

Experimental and numerical analysis of thermal deformation of electronic packages, QFP and MCM Reviewed International journal

Y. Morita, K. Arakawa and M. Todo

Journal of Experimental Mechanics   2006.4

PLA/PCLポリマーブレンドの相構造制御による破壊特性の向上に関する研究 Reviewed

高山哲生，東藤　貢，辻　秀人，新川和夫

高分子論文集   2006.4

PLA/PCL系ポリマーブレンドの破壊特性に及ぼす添加剤の影響 Reviewed

高山哲生，東藤　貢，辻　秀人，新川和夫

日本機械学会論文集（A編）   2006.1

Experimental Study on the Thermo-Mechanical Effects of Underfill and Low-CTE Substrate in a Flip-Chip Device Reviewed International journal

Y. Morita, K. Arakawa, M. Todo, and M. Kaneto

Microelectronics Reliability   2006.1

Effect of crystallinity and loading-rate on mode I fracture behavior of poly(lactic acid) Reviewed International journal

S.D. Park, M. Todo, K. Arakawa and M. Koganemaru

Polymer   2006.1

Dependence of Loading-Rate on the Fracture Mechanism of MBS Polymer Blend Reviewed International journal

M Todo, K. Arakawa, J. Takahashi, H. Watanabe and J. Nakamoto

Proceedings of the 5th International Conference on Mechanics of Time Dependent Materials   2005.10

Characterization of Fracture Mechanism of PLLA/PCL polymer Blend Reviewed International journal

S.-D. Park, M. Todo, H. Tsuji, Y. Takenoshita and K. Arakawa

Proceedings of the 5th Japan-Korea Joint Symposium on Composite Materials   2005.10

Microscopic observation and modeling of toughening mechanism in rubber-modified polymer Reviewed International journal

M. Todo and K. Arakawa

Proceedings of 11th International Conference on Fracture   2005.3

ハイドロキシアパタイト粒子分散ポリL乳酸の破壊挙動に及ぼす粒子形状の影響 Reviewed

東藤　貢，朴　相玳，新川和夫，竹之下康治

日本複合材料学会誌   2005.1

Finite Element Modeling of Damage Formation in Rubber-Toughened Polymer Reviewed International journal

M. Todo, Y. Fukuya, S. Hagihara and K. Arakawa

Key Engineering Materials   297-300   1019 - 1024   2005.1

Effect of Mixing Process on the Fracture Behavior of HA/PLLA Composite Material Reviewed International journal

S.D. Park, M. Todo, K. Arakawa, Y. Takenoshita

Key Engineering Materials   297-300   2453 - 2458   2005.1

Effects of Isothermal Crystallization on Fracture Toughness and Crack Growth Behavior of Poly(lactic acid) Reviewed International journal

S.D. Park, M. Todo and K. Arakawa

Journal of Materials Science   40 ( 4 )   1055 - 1058   2005.1

安定・不安定き裂進展を伴う高分子材料の破壊エネルギ計測 Reviewed

新川和夫,　馬田俊雄，朴　相玳，東藤　貢

実験力学   2005.1

Fracture Properties of Bioabsorbable HA/PLLA/PCL Composite Materials Reviewed International journal

S.D. Park, M. Todo, K. Arakawa, H. Tsuji and Y. Takenoshita

Proceedings of Third International Conference on Experimental Mechanics   5852   838 - 843   2004.11

Nanoscale measurement of thermal deformation in microelectronic devices by phase-shifting moire interferometry Reviewed International journal

Y. Morita, K. Arakawa and M. Todo

Conference Proceedings of Modern Science of Advanced Materials   2004.7

Fracture behavior of bioabsorbable polymer and composites Reviewed International journal

M. Todo, S.D. Park and K. Arakawa

Conference Proceedings of Modern Science of Advanced Materials   2004.7

Displacement and Strain Measurements using Phase-Shifting Moire Interferometry Reviewed International journal

Y. Morita, K. Arakawa and M. Todo

Proceedings of the SEM X International Congress and Exposition on Experimental and Applied Mechanics   2004.6

Toughening Mechanism of Bioabsorbable PLA/PCL Polymer Blend Reviewed International journal

M. Todo, K. Arakawa, H. Tsuji and Y. Takenoshita

Proceedings of the SEM X International Congress and Exposition on Experimental and Applied Mechanics   2004.6

GM充填エポキシ樹脂の破壊特性に及ぼすゴム変性の影響 Reviewed

東藤　貢，米田真介，新川和夫

材料   2004.1

合わせガラスの衝撃エネルギー吸収機構 Reviewed

東藤　貢, 浅田隆宏，新川和夫, 田原雅貴

実験力学   2004.1

Fracture Properties of Bioabsorbable HA/PLLA Composite Material International journal

S.-D. Park, M. Todo, K. Arakawa and Y. Takenoshita

Proceedings of The 4th Korea-Japan Joint Symposium on Composite Materials   2003.10

Loading-Rate Dependence of Mode I Fracture Behavior of Biodegradable Poly(Lactic Acid) Reviewed International journal

M. Todo, N. Shinohara and K. Arakawa

Proceedings of the 12th International Conference on Deformation, Yield and Fracture of Polymers   2003.4

位相シフトモアレ干渉法によるSOJ電子パッケージの熱ひずみ解析 Reviewed

森田　康之，新川　和夫，東藤　貢

実験力学   2003.1

Effect of Annealing on the Fracture Behavior of Polyethylene Reviewed International journal

S. Ravi, M. Todo, K. Arakawa and K. Takahashi,

Proceedings of the 14th Bienniel Conference on Fracture (ECF14)   2002.9

Effect of Crystallization on the Mode I Fracture Behavior of Biodegradable Poly(lactic acid) Reviewed International journal

M. Todo, N. Shinohara, K. Arakawa and K. Shankar

Proceedings of 3rd Asian International Symposium on Biomaterials and Drug Delivery Systems   2002.4

モアレ干渉法によるQFP，MCM電子デバイスの熱変形計測とFEM解析 Reviewed

森田　康之，新川　和夫，東藤　貢

実験力学   2002.1

モアレ干渉法を応用したフリップチップデバイスの熱変形解析 Reviewed

森田　康之，新川　和夫，東藤　貢，金戸　正行

エレクトロニクス実装学会誌   2002.1

Impact Fracture Behavior of Glass Bubbles Filled Epoxy Resins Reviewed International journal

M. Todo, K. Takahashi and K. Higuchi

Proceedings of the 16h Annual Technical Conference on Composite Materials   2001.9

Effect of Rubber Content on the Fracture Toughness of ABS Resin Reviewed International journal

T. Ikeda, T. Tokunaga, D.-B. Lee, N. Miyazaki, M. Todo, K. Takahashi and N. Ito

Materials Science Research International, Special Technical Publication-2   2001.1

Finite element model of thermal stress effects on stress distributions in rubber modified glassy polymers Part 1 - Single particle model Reviewed International journal

P.-Y.B Jar, M. Todo, K. Takahashi, K. Konishi and T. Shinmura

Plastics Rubber and Composites   30 ( 3 )   101 - 109   2001.1

FEM Verification on Craze Suppression for Enhancement of Shear Yielding in Rubber-Modified Glassy Polymers Reviewed International journal

P.-Y.B. Jar, M. Todo, K. Takahashi, K. Konishi and T. Shinmura

Proceedings of 11th International Conference on Deformation , Yield and Fracture of Polymers   2000.4

Effect of Particle Dispersibility on the Fracture Behavior of ZrO2/Ni Composite Materials Reviewed International journal

M. Todo, N. Hanada, K. Arakawa and K. Takahashi

Proceedings of the Second Asian-Australasian Conference on Composite Materials (ACCM-2000)   2000.4

Fracture Micromechanisms in Rubber-Toughened Poly(Methyl Methacrylate) Reviewed International journal

M. Todo, K. Takahashi, P.-Y.B. Jar and Ph. Beguelin

Proceedings of 11th International Conference on Deformation , Yield and Fracture of Polymers   2000.4

Dynamic Fracture Behavior of Interlayer-Toughened Graphite/Epoxy Composite under Bending Loading Reviewed International journal

M. Todo and K. Takahashi

Proceedings of the 14th Annual Technical Conference on Composite Materials   1999.9

Three Dimensional Elastic-Plastic Analysis of Wire Sweep in Semiconductor Package Reviewed International journal

H. Matsuda, T. Takado, Y. Ohno, M. Todo and K. Takahashi

Proceedings of 12th European Microelectronics & Package Conference   1999.1

ゴム強化エポキシ樹脂のき裂先端損傷機構 Reviewed

李　徳甫，池田　徹，東藤　貢，宮崎則幸，高橋　清

日本機械学会論文集（A編）   1999.1

The Mechanism of Damage around Crack Tip in Rubber Modified Epoxy Resin Reviewed International journal

D.-B. Lee, T. Ikeda, M. Todo, N. Miyazaki and K. Takahashi

Proceedings of First Asian-Australasian Conference on Composite Materials (ACCM-1)   1998.10

Hygrothermal Effects on Mode II Interlaminar Fracture Behavior of Fiber Reinforced Polyamide Composites Reviewed International journal

M. Todo and K. Takahashi

Proceedings of First Asian-Australasian Conference on Composite Materials (ACCM-1)   1998.10

Mode II Interlaminar Fracture Behavior of Fiber Reinforced Polyamide Composites under Static and Dynamic Loading Conditions Reviewed International journal

M. Todo, T. Nakamura and K. Takahashi

Proceedings of the 13th Annual Technical Conference on Composite Materials   1998.9

ランダム配向型ガラス長繊維強化ポリアミド６の衝撃特性 Reviewed

東藤　貢，藤井　幹也，高橋　清

強化プラスチックス   1998.1

Study of Mode-I Interlaminar Crack Growth in DCB Specimens of Fibre-Reinforced Composites Reviewed International journal

M. Todo and P.-Y.B. Jar

Composite Science and Technology   58 ( 1 )   105 - 118   1998.1

Tensile properties of poly(L-lactic) acid (PLLA) blends

N. Eawwiboonthanakit, M. Jaafar, Z. A. A. Hamid, Mitsugu TODO, B. Lila

Advanced Materials Research   Vol. 1024   pp. 179 - pp. 183   1900

Excellency of Hydroxyapatite Composite Scaffolds for Bone Tissue Engineering

@Mohammad Shariful Islam, @Mohammad Abdulla-Al-Mamun, @Alam Khan, Mitsugu Todo（ Role： Joint author）

IntechOpen  2020.7 

関節・軟骨の再生医療

東藤　貢　他（ Role： Joint author）

シーエムシー出版  2019.12 

Materials for Biomedical Engineering: Hydrogels and Polymer-based Scaffolds

T. Arahira, M. Todo（ Role： Joint author）

Elsevier  2019.8 

高度物理刺激と生体応答

東藤　貢　他（ Role： Joint author）

養賢堂  2017.10 

整形外科医のための骨のバイオメカニクス解析　CT画像からモデルを作って有限要素法で解析しよう！

稲葉 裕, 東藤　貢（ Role： Joint author）

メジカルビュー社  2017.3 

Hydrated Materials: Applications in Biomedicine and the Environment

Mitsugu TODO（ Role： Joint author）

2015.5 

バイオマテリアル研究の最前線

東藤　貢（ Role： Joint author）

日本金属学会  2014.12 

体内埋め込み医療材料の開発とその理想的な性能・デザインの要件

東藤貢他（ Role： Joint author）

技術情報協会  2013.6 

高分子材料・技術総覧

宮田清蔵（編集委員長）他（ Role： Joint author）

産業技術サービスセンター  2004.9 

複合材料活用辞典

邉　吾一（編集委員長）他１３７名（ Role： Joint author）

産業調査会  2001.4 

Biomechanical effects of bone quality after total hip arthroplasty International conference

Mitsugu Todo, #AIman Izmin

The 6th International Conference on Materials and Reliability (ICMR2022)  2022.12 

Effects of Viscoelastic Response on Dynamic Deformation of Artificial Polymeric Heart Valve International conference

Mitsugu Todo, @Shahrul Hisyam Marwan

The 6th International Conference on Materials and Reliability (ICMR2022)  2022.12 

大腿骨ステム周囲骨折に及ぼす加齢とステムデザインの影響 Invited

東藤　貢

第49回日本臨床バイオメカニクス学会  2022.11 

間葉系幹細胞とコラーゲン系足場材料を用いた骨・軟骨様組織構築の試み Invited

東藤　貢

第49回日本臨床バイオメカニクス学会  2022.11 

Mechanical characterization of tubular bioactuator using human iPS cell-derived cardiomyocytes International conference

H. Kurita, M. Todo

The 11th Asian-Pacific Conference on Biomechanics  2021.12 

Bending Deformation and Fracture Mechanism of Porous Composite Sandwich Beam Invited International conference

M. Todo, F. H. M. Azahar

RCM 2021 & MAMIP 2021  2021.12 

機械学習を用いた椎体の領域推定と圧縮強度推定手法の検討

東藤貢、栫弘樹

第48回日本臨床バイオメカニクス学会  2021.11 

椎体強度と強い相関を示す新しい指標の検討

東藤貢、呉順、梅林大督、山本優

第48回日本臨床バイオメカニクス学会  2021.11 

椎体の圧縮強度が脊椎の骨折現象へ及ぼす影響

加藤大雅，東藤 貢

日本機械学会M&M2021材料力学カンファレンス  2021.9 

多孔質HA粒子分散バイオポリマー複合材料の圧縮変形特性

松藤亮太,　東藤　貢

日本機械学会M&M2021材料力学カンファレンス  2021.9 

機械学習を用いた椎体の圧縮強度推定手法の検討

栫 弘樹，東藤 貢

日本機械学会M&M2021材料力学カンファレンス  2021.9 

ヒトiPS細胞由来心筋細胞を用いた自己拍動チューブの作製と理論モデルの構築

栗田寛子、東藤貢

第33回バイオエンジニアリング講演会  2021.6 

ヒトiPS細胞由来心筋細胞を用いたチューブ状構造体の作製と評価

#栗田寛子、東藤貢

第20回日本再生医療学会総会  2021.3 

循環器系組織工学のための生体吸収性足場材料の開発と評価 Invited

東藤　貢

日本材料学会第59回生体・医療材料部門委員会  2020.12 

CT画像を利用した個別有限要素解析の臨床応用 Invited

東藤　貢

第35回日本整形外科学会基礎学術集会  2020.10 

ヒトiPS細胞由来心筋細胞の拍動を表現する数理モデルに関する基礎的研究

#栗田寛子、東藤貢

第19回日本再生医療学会総会  2020.5 

大腿骨頭壊死症を有する大腿骨の骨折メカニズムに関する研究

#木佐木知裕，東藤貢，@稲葉裕

日本機械学会　第32回バイオエンジニアリング講演会  2019.12 

発電細胞を模擬したバイオ電池の基礎的特性に関する研究

#Bou Bendkolbot, 東藤貢，高原淳

日本機械学会　第32回バイオエンジニアリング講演会  2019.12 

Development and characterization of biodegradable polymeric scaffolds for cardiovascular tissue engineering Invited International conference

Mitsugu Todo

5th International Conference on Materials and Reliability  2019.11 

Fracture mechanism of bioceramic bead filled biopolymer composite material International conference

#John Duckworth, Mitsugu Todo

5th International Conference on Materials and Reliability  2019.11 

びまん性突発性骨増殖症における骨折のメカニズム

東藤貢，郭墅，小林孝臣，森本忠嗣，馬渡正明

第46回日本臨床バイオメカニクス学会  2019.11 

有限要素法と損傷力学を用いた大腿骨骨折解析 Invited

東藤貢，松浦佑介，中島康晴

第46回日本臨床バイオメカニクス学会  2019.11 

Correlation between vertebral strength and bone mineral density

2019.11 

下半身骨格モデルを用いた人工関節置換後の応力状態と骨密度経年変化の解析 Invited

東藤貢，中島康晴

第39回日本骨形態計測学会  2019.7 

心筋力学モデルを用いたヒトiPS細胞由来心筋細胞の拍動挙動の解析

東藤貢、#近藤聖奈、#池田沙樹、#栗田寛子

第18回日本再生医療学会総会  2019.3 

骨粗鬆症による椎体強度の低下に関する研究

東藤貢、＠梅林大督、＠原政人

第３１回バイオエンジニアリング講演会  2018.12 

FEMによる人工股関節のバイオメカニクス解析 Invited

東藤貢、＠中島康晴

第４５回日本臨床バイオメカニクス学会  2018.11 

脊椎解析への有限要素法の応用 Invited

東藤貢、＠高野弘充、＠佐藤達哉、@米澤郁穂

第４５回日本臨床バイオメカニクス学会  2018.11 

Assessment of Vertebra Strength using CT-Image Based Finite Element Method Invited International conference

European Orthopaedic Research Society 26th Annual Meeting (EORS2018)  2018.9 

CT－FEMによる椎体強度評価と骨粗鬆症診断への応用

東藤貢、＠梅林大督、＠原政人

第３８回日本骨形態計測学会  2018.6 

CT-FEMを用いた骨とインプラントの力学的相互作用の理解と臨床応用 Invited

東藤貢

第３８回日本骨形態計測学会  2018.6 

Development of bone strength prediction method by using multidisciplinary computational anatomy with damage mechanics International conference

2018.3 

コンピュータ・シミュレーション技術を応用した整形外科バイオメカニクス研究 Invited

東藤貢

第８回日本CAOS研究会  2014.3 

コラーゲン/リン酸三カルシウム複合系scaffoldと間葉系幹細胞を用いた骨再生に関するin vitro研究

荒平高章, 東藤貢

第１３回日本再生医療学会総会  2014.3 

ヒト間葉系幹細胞とコラーゲンゲル/多孔体２相型足場材料を用いた軟骨再生に関する基礎的研究

東藤貢, 中牟田侑昌, 荒平高章

第１３回日本再生医療学会総会  2014.3 

構造が異なる２種類のβ-TCP/collagen複合系scaffoldの創製と骨組織工学への応用

東藤貢, 荒平高章

第２６回バイオエンジニアリング講演会  2014.1 

コラーゲン２相系scaffoldと間葉系幹細胞による軟骨再生に関する基礎的研究

中牟田侑昌, 東藤貢, 荒平高章

第２６回バイオエンジニアリング講演会  2014.1 

骨組織再生のためのコラーゲン/リン酸三カルシウム複合系scaffoldのin vitro研究

荒平高章, 東藤貢

第２６回バイオエンジニアリング講演会  2014.1 

Mechanical variation and proliferation behavior in hydroxyapatite based scaffolds with mesenchymal stem cells International conference

P. Yos, Md. Abdul Kafi, M. Todo

The 15th International Conference on Biomedical Engineering  2013.12 

Proliferation behavior of mesenchymal stem cells in peptide functionalized chitosan scaffolds International conference

Md. Abdul Kafi, M. Todo

The 15th International Conference on Biomedical Engineering  2013.12 

Development and characterization of CNT/biopolymer electrodes for bio-fuel cell International conference

M. Todo, K. Yamauchi

The 15th International Conference on Biomedical Engineering  2013.12 

Development and characterization of bioceramic/polymer composite scaffold with drug release function for bone tissue engineering International conference

M. Todo, N. Yamada

The 15th International Conference on Biomedical Engineering  2013.12 

CNT分散バイオポリマー多孔体を電極材料とするバイオ燃料電池の創製と評価

東藤貢, 山内健太郎, 荒平高章

第３５回日本バイオマテリアル学会大会  2013.11 

軟骨再生用scaffoldの圧縮およびせん断変形特性の評価

東藤貢, 長岡健太

第３５回日本バイオマテリアル学会大会  2013.11 

コラーゲンゲル・スポンジ複合系scaffoldとヒト間葉系幹細胞による軟骨再生に関する基礎研究

中牟田侑昌, 荒平高章, 東藤貢

第４０回日本臨床バイオメカニクス学会  2013.11 

有限要素法を用いた多孔質バイオセラミックスの損傷解析

荒平高章, 東藤貢, 名井陽

第４０回日本臨床バイオメカニクス学会  2013.11 

人工股・膝関節置換術のバイオメカニクス研究へのコンピュータ・シミュレーションの応用 Invited

東藤貢

第４０回日本臨床バイオメカニクス学会  2013.11 

コラーゲン/β-TCP複合多孔体と間葉系幹細胞のハイブリッド化によるin vitro骨組織再生

東藤貢, 荒平高章

第２１回機械材料・材料加工技術講演会  2013.11 

骨再生用ハイドロキシアパタイトscaffoldの多孔質構造制御に関する研究

有吉文彬, 東藤貢, 荒平高章

第２４回バイオフロンティア講演会  2013.11 

連通多孔質構造を有する骨再生用バイオセラミックスの力学特性

東藤貢, Yos Phanny

M&M2013材料力学カンファレンス  2013.10 

軟骨組織工学のためのコラーゲンスポンジ/ハイドロゲル複合構造体の創製

東藤貢, 中牟田侑昌

第３８回複合材料シンポジウム  2013.9 

CNT/生体ポリマー多孔質複合材料の創製とバイオ燃料電池への応用

東藤貢, 山内健太郎

第３８回複合材料シンポジウム  2013.9 

薬剤徐放機能を有する生体吸収性ポリマー/ハイドロキシアパタイト複合多孔体の創製と評価

東藤貢, 山田直樹

第３８回複合材料シンポジウム  2013.9 

多孔体とゲルと幹細胞を用いた骨・軟骨の組織工学，日本機械学会２０１３年度年次大会 Invited

東藤貢

日本機械学会２０１３年度年次大会  2013.9 

Characterization of compressive mechanical behavior of gel/sponge 2-phase scaffold for cartilage tissue engineering International conference

U. Nakamuta, M. Todo, T. Arahira

The 7th Asian Pasific Conference on Biomechanics  2013.8 

Tensile mechanical characteristics of core-shell hybrid structural polymer scaffold for ligament tissue engineering International conference

V. Vannaladsaysy, M. Todo

The 7th Asian Pasific Conference on Biomechanics  2013.8 

Characterization of compressive deformation of porous HA and HA/PCL composite scaffolds for bone tissue engineering International conference

P. Yos, M. Todo

The 7th Asian Pasific Conference on Biomechanics  2013.8 

in vivoにおける人工骨の力学的経時変化と骨形成能，第３３回日本骨形態計測学会 Invited

東藤貢, 荒平高章, 名井陽

第３３回日本骨形態計測学会  2013.7 

In vitro bone formation by mesenchymal stem cells with 3D collagen/β-TCP composite scaffold Invited International conference

2013.7 

Development and characterization of hybrid scaffolds with core-shell structure for ligament tissue engineering International conference

V. Vannaladsaysy, M. Todo

The 4th Asian Biomaterials Congress  2013.6 

Characterization of β-TCP/collagen two-phase scaffold with mesenchymal stem cells for bone tissue engineering International conference

2013.6 

Prediction of bone fractures associated with hip arthroplasties by finite element analysis

2013.2 

モバイルベアリング型人工膝関節脛骨インサートの応力状態に及ぼす第２摺動面可動性の影響

東藤貢, モフドアヌア・モフドアフザン, 長嶺隆二, 廣川俊二

第４４回日本人工関節学会  2013.2 

Development of computational knee simulator for biomechanical analysis of TKA

2013.2 

Biological and biomechanical characterization of bone regeneration by porous bioceramics International conference

Mitsugu Todo, Akira Myoui, Hideki Yoshikawa

KSME-JSME Joint Symposium on CM & CAE 2012  2012.9 

人工股関節置換後の骨折メカニズムに関する研究

福岡航世，東藤貢，中島康晴，岩本幸英

2012年度日本機械学会年次大会  2012.9 

深屈曲時にモバイルベアリング型人工膝関節に生じる応力変動

東藤貢，城田明典，長嶺隆二

2012年度日本機械学会年次大会  2012.9 

コラーゲン/β-TCP複合系scaffoldを用いた間葉系幹細胞培養系における細胞外マトリックス形成機構

東藤貢，荒平高章

第11回日本再生医療学会総会  2012.6 

Effect if proliferation and differentiation of mesenchymal stem cell on the mechanical behavior of collagen/β-TCP scaffold International conference

2012.6 

人工股関節の置換により骨に生じる微視損傷の発生と蓄積

東藤貢，福岡航世，中島康晴，岩本幸英

第２４回日本人工関節学会  2012.2 

深屈曲状態でモバイルベアリング型人工膝関節に生じる応力変動解析

東藤貢 ，城田明典，長嶺隆二

第２４回日本人工関節学会  2012.2 

骨密度分布を考慮した3次元下肢モデルによる腫瘍用人工膝関節置換術の力学解析

東藤貢，荒平高章，名井陽，吉川秀樹

第２４回日本人工関節学会  2012.2 

軟骨・骨インターフェイス組織再生のための多層scaffoldの圧縮変形挙動

Hwang SungHyen，東藤貢

日本機械学会バイオエンジニアリング講演会  2012.1 

人工関節を置換した股関節における微視損傷発生のメカニズム

福岡航世，東藤貢，中島康晴，岩本幸英

日本機械学会バイオエンジニアリング講演会  2012.1 

コラーゲン/β-TCP複合系scaffoldの力学特性に及ぼす間葉系幹細胞培養の影響

荒平高章，東藤貢

第３３回日本バイオマテリアル学会  2011.11 

人工膝関節脛骨インサートの応力変動に及ぼす顆部デザインの影響

東藤貢，城田明典，長嶺隆二

日本臨床バイオメカニクス学会  2011.11 

コラーゲン/β-TCP複合系scaffoldの圧縮力学特性に及ぼす間葉系幹細胞培養の影響

荒平高章，東藤貢

日本臨床バイオメカニクス学会  2011.11 

コラーゲン系scaffoldを用いた骨芽細胞様細胞の培養に関する基礎的研究

東藤貢，佃浩平，荒平高章

第39回日本関節病学会  2011.11 

骨密度分布を考慮した有限要素モデルの構築と人工股関節解析への応用 Invited

東藤貢

第39回日本関節病学会  2011.11 

屈曲動作状態におけるモバイルベアリング型人工膝関節の応力変動

東藤貢，城田明典，長嶺隆二

第39回日本関節病学会  2011.11 

人工股関節を置換した大腿骨の安全性評価

福岡航世，東藤貢，中島康晴，岩本幸英

日本機械学会計算力学講演会  2011.10 

コラーゲン/β-TCP複合系scaffoldの圧縮力学特性に及ぼす間葉系幹細胞増殖・分化の影響

荒平高章，東藤貢

日本機械学会バイオフロンティア講演会  2011.10 

人工膝関節の応力変動に及ぼす関節面形状の非対称性の影響

城田明典，東藤貢，長嶺隆二

日本機械学会バイオフロンティア講演会  2011.10 

コラーゲン/α-TCP複合系scaffoldの力学特性と細胞増殖能

佃浩平，東藤貢

日本機械学会バイオフロンティア講演会  2011.10 

人工関節置換が骨に及ぼす力学的影響について Invited

東藤貢

東北大学金属材料研究所共同研究ワークショップ日本バイオマテリアル学会東北地域講演会  2011.9 

コラーゲン系scaffoldを用いた再生骨創製に関する基礎的研究

佃浩平，荒平高章，東藤貢

日本機械学会年次大会2011  2011.9 

異なるデザインを有するPS型人工膝関節の深屈曲動作を模擬した応力解析

城田　明典，東藤　貢

日本機械学会年次大会2011  2011.9 

β-TCP/コラーゲン複合系scaffoldを用いた間葉系幹細胞の培養に関する基礎的研究

荒平高章，東藤貢

日本機械学会材料力学講演会(M&M2011)  2011.7 

関節組織再生のための積層構造scaffoldの圧縮変形挙動

黄盛鉉，東藤貢

日本機械学会材料力学講演会(M&M2011)  2011.7 

Growth behavior of mesenchymal stem cell in 3D porous collagen scaffolds International conference

Takaaki Arahira, Mitsugu Todo, Gouping Chen

The 4th International Symposium for Interface Oral Health Science in Sendai  2011.3 

Mechanical properties and degradability of HA/PLLA composites with different particle size distribution International conference

Tetsuo Takayama, Mitsugu Todo, Hiroshi Ito

The 4th International Symposium for Interface Oral Health Science in Sendai  2011.3 

Biomechanical assessment for fully edentulous maxilla with dental implants International conference

Takaaki Arahira, Mitsugu Todo, Yasuyuki Matsushita, Kiyoshi Koyano

The 4th International Symposium for Interface Oral Health Science in Sendai  2011.3 

同一症例におけるデザインの異なる人工膝のFluoroscopic Imagesを用いた動態解析

長嶺隆二，廣川俊二，東藤貢，近藤桂史，陳　維嘉

第４１回日本人工関節学会  2011.2 

表面置換型人工関節が股関節の力学状態に及ぼす影響

東藤貢，北村英輔，中島康晴，岩本幸英

第４１回日本人工関節学会  2011.2 

バーチャル・膝シミュレータを用いた屈曲動作解析における回旋の影響

東藤貢，大野充孝，日垣秀彦，三浦裕正，長嶺隆二

第４１回日本人工関節学会  2011.2 

Flexibility of the implanted knee depends mainly on the patients and partly on the prostheses designs International conference

Ryuji Nagamine, Shunji Hirokawa, Mitsugu Todo, Weijia Chen, Keiichi Kondo, Masanobu Takayama

2011 Annual Meeting of the Orthopaedic Research Society  2011.1 

コラーゲン系scaffoldによる骨芽細胞様細胞の培養に関する基礎的研究

佃浩平，荒平高章，東藤貢

第２３回バイオエンジニアリング講演会  2011.1 

人工股関節により生じるストレス・シールディング解析

北村英輔，東藤　貢，中島 康晴，岩本 幸英

第２３回バイオエンジニアリング講演会  2011.1 

変形性股関節症に対するモジュラー型人工股関節置換術の力学的検討

福岡航世，東藤貢，中島 康晴，岩本 幸英

第２３回バイオエンジニアリング講演会  2011.1 

骨組織再生によるバイオセラミックス系人工骨の力学特性の変化

荒平高章，東藤貢，名井陽

第２３回バイオエンジニアリング講演会  2011.1 

バーチャル膝シミュレータの動作状態に及ぼす筋力の影響

大野充孝，東藤貢，日垣秀彦，三浦裕正，長嶺隆二

第２３回バイオエンジニアリング講演会  2011.1 

人工膝関節の応力状態に及ぼす生理的膝関節形状の影響

城田明典，東藤貢，長嶺隆二

第２３回バイオエンジニアリング講演会  2011.1 

コラーゲン系scaffoldを用いた細胞培養における力学刺激の影響

三宅慶彦，森田康之，東藤貢

第２３回バイオエンジニアリング講演会  2011.1 

コア・シェル構造による多孔質吸収性ポリマーの力学特性制御

Joo-Eon Park,　東藤貢

第２３回バイオエンジニアリング講演会  2011.1 

関節修復のための２層構造scaffoldの創製と評価

黄　盛鉉，東藤貢

第２３回バイオエンジニアリング講演会  2011.1 

多孔質バイオセラミックスによる骨再生のバイオメカニクス的検討

荒平高章，東藤貢，名井陽

第32回日本バイオマテリアル学会大会  2010.11 

バイオセラミックス微粒子分散ポリL乳酸多孔体の力学特性と細胞増殖能

Joo-Eon PARK, 東藤貢

第32回日本バイオマテリアル学会大会  2010.11 

Prediction and analysis of the biomechanical properties of porous hydroxyapatite ceramics after implantation International conference

Limei Ren, Mitsugu Todo, Takaaki Arahira, Akira Myoui

International Conference on Computational Methods 2010  2010.11 

コンピュータシミュレーションによる人工膝関節の力学的安全性評価 Invited

東藤貢

第37回日本臨床バイオメカニクス学会  2010.11 

有限要素法による表面置換型人工関節置換股の応力解析

北村英輔，東藤貢，中島康晴，岩本幸英

第37回日本臨床バイオメカニクス学会  2010.11 

多孔質バイオセラミックスの力学特性に及ぼす骨組織再生の影響

荒平高章，東藤貢，名井陽

第37回日本臨床バイオメカニクス学会  2010.11 

バーチャル膝シミュレータの屈曲動作に及ぼす筋肉モデルの影響

大野充孝，東藤貢，日垣秀彦，三浦裕正，長嶺隆二

第37回日本臨床バイオメカニクス学会  2010.11 

上顎無歯顎インプラント補綴におけるインプラント長さの影響に関する生体力学的検討

松下恭之，荒平高章，東藤貢，春田明日香，江崎大輔，松崎達哉，古谷野潔

第37回日本臨床バイオメカニクス学会  2010.11 

Biomechanical interaction between porous bioactive ceramics and regenerated bone tissue International conference

Limei Ren, Mitsugu Todo, Takaaki Arahira, Akira Myoui

The 2nd International Conference on Nanomechanics & Nanocomposites  2010.10 

骨組織形成による多孔質バイオセラミックスの力学特性変化に関する研究

荒平高章，東藤貢，名井陽

日本機械学会M&M2010材料力学カンファレンス  2010.10 

多孔質バイオセラミックスによる骨再生のバイオメカニクス的検討

東藤 貢，荒平 高章，名井 陽

日本機械学会第23回計算力学講演会  2010.9 

表面置換型と全置換型人工股関節が股関節の応力状態に及ぼす影響

北村 英輔，東藤 貢，中島 康晴，岩本 幸英

日本機械学会第23回計算力学講演会  2010.9 

バーチャルシミュレータによる人工関節置換膝の深屈曲解析

大野 充孝，東藤 貢，日垣 秀彦，三浦 裕正

日本機械学会第23回計算力学講演会  2010.9 

歯科インプラント周辺骨の変形挙動計測

森田康之，東藤貢，松下恭之

日本機械学会2010年度年次大会  2010.9 

表面置換型人工関節が骨内応力場に及ぼす影響

北村英輔，東藤貢

日本機械学会2010年度年次大会  2010.9 

コラーゲン系scaffoldによる再生骨の力学特性

三宅慶彦，荒平高章，東藤貢

日本機械学会2010年度年次大会  2010.9 

Mechanical analysis of bone regeneration using porous bioactive ceramics International conference

Limei Ren, Mitsugu Todo, Takaaki Arahira, Akira Myoui

International Workshop on Nano, Bio and Amorphous Materials  2010.8 

Compressive mechanical properties and deformation behavior of PLLA/HAp and PLLA/PCL scaffolds

Joo-Eon Park, Mitsugu Todo

2010.3 

コンピュータ・シミュレーションによる変形性股関節症の生体力学的検討

北村英輔，東藤貢，藤井政徳，中島康晴，岩本幸英

平成２１年度日本生体医工学会九州支部学術講演会  2010.3 

3次元股関節モデルを用いた人工股関節ステムと大腿骨の生体力学的相互作用に関する研究

東藤　貢，中村尚平，馬渡正明，佛淵孝夫

第40回日本人工関節学会  2010.2 

有限要素法シミュレーションによる人工股関節の疲労強度評価法の標準化

東藤　貢，姜　有峯，堤定美

第40回日本人工関節学会  2010.2 

TKA術後におけるフルオロ解析データを参考にした3次元動的有限要素解析

長嶺隆二，廣川俊二，東藤貢，陳維嘉，近藤桂史，高山正伸，原俊彦，杉岡洋一

第40回日本人工関節学会  2010.2 

バーチャル・シミュレータによるPS型人工膝関節の応力解析

東藤　貢，大野充孝，日垣秀彦，三浦裕正

第40回日本人工関節学会  2010.2 

モジュラー型ステムが大腿骨に及ぼす生体力学的影響に関する基礎的研究

東藤　貢，中村尚平，中島康晴，岩本幸英

第40回日本人工関節学会  2010.2 

無歯上顎骨のインプラント治療に対する生体力学的検討

荒平高章，東藤貢，松下恭之，古谷野潔

第22回バイオエンジニアリング講演会  2010.1 

複合構造化による吸収性多孔質材料の高強度化

朴冑彦，東藤貢

第22回バイオエンジニアリング講演会  2010.1 

CTデータに基づく臼蓋形成不全股関節のモデリングと応力解析

北村英輔，東藤貢，藤井政徳，中島康晴，岩本幸英

第22回バイオエンジニアリング講演会  2010.1 

細胞培養が人工生体材料の力学特性に及ぼす影響

三宅慶彦，荒平高章，森田康之，東藤貢

第22回バイオエンジニアリング講演会  2010.1 

バーチャルシミュレータによる人工関節置換膝の応力解析

大野充孝，東藤貢，日垣秀彦，三浦裕正

第22回バイオエンジニアリング講演会  2010.1 

複合系scaffoldの力学特性と細胞増殖の影響

東藤貢

第14回骨軟部吸収性材料フォーラム  2009.12 

Mechanical studies on Biomaterials for reconstruction of lower limb joints Invited International conference

Mitsugu Todo

The 2nd AUN/SEED-Net Regional Conference on Materials Engineering  2009.11 

層構造を利用した多孔質PLLAおよびPLLA/HApの力学特性制御

Joo-Eon Park,　東藤貢

第３１回日本バイオマテリアル学会大会  2009.11 

人工骨の力学挙動に及ぼす骨組織再生の影響

荒平高章，東藤貢，名井陽

第３１回日本バイオマテリアル学会大会  2009.11 

Assessment of Mechanical Stability and Safety for Fully Edentulous Maxilla with Dental Implants International conference

T Arahira, M Todo, Y Matsushita, K Koyano

Asian Pacific Conference for Materials and Mechanics 2009  2009.11 

PLAの力学特性と耐熱性に及ぼす添加剤の影響

高山哲生，東藤貢，ヴィレイ・ヴァナラサイシー

成形加工シンポジア’09  2009.11 

生体材料の圧縮力学特性に及ぼす細胞培養の影響

三宅慶彦，荒平高章，森田康之，東藤貢

粉体粉末冶金協会平成21年度秋季大会  2009.10 

下肢運動機能再建のための生体材料に関する力学的研究 Invited

東藤貢

粉体粉末冶金協会平成21年度秋季大会  2009.10 

Comparison of Posterior Stabilized and Cruciate Retaining Type Knee Prostheses under Flexional Motion International conference

M.Todo, L. Qian, R. Nagamine, W.J. Chen, T. Hara and Y. Sugioka

Effect OF Pelvis on The Mechanical Interaction between Femur and Femoral Stem  2009.10 

Effect OF Pelvis on The Mechanical Interaction between Femur and Femoral Stem International conference

M.Todo, S. Nakamura, T. Hara, R. Nagamine, Y. Sugioka, M. Mawatari and T. Hotokebuchi

Effect OF Pelvis on The Mechanical Interaction between Femur and Femoral Stem  2009.10 

バーチャルシミュレータによる人工膝関節の応力解析

東藤貢，大野充孝，日垣秀彦，三浦裕正，長嶺隆二

第36回日本臨床バイオメカニクス学会  2009.10 

股関節の応力分布状態に及ぼす臼蓋形成不全の影響

東藤貢，北村英輔，藤井政徳，佐藤大志，中島康晴，岩本幸英

第36回日本臨床バイオメカニクス学会  2009.10 

陽解法有限要素法によるPS型とCR型人工膝関節の比較解析

銭　立和，東藤　貢，長嶺隆二

第２２回計算力学講演会  2009.10 

インプラント治療を施した無歯上顎の力学的安全性評価

荒平高章，東藤　貢，松下恭之，古谷野潔

第２２回計算力学講演会  2009.10 

大腿骨の力学状態に及ぼす人工股関節ステムデザインの影響

中村尚平，東藤　貢，原　俊彦，馬渡正明，佛淵孝夫，杉岡洋一

第２２回計算力学講演会  2009.10 

Bisurface人工膝関節における深屈曲時の応力変動に及ぼす内旋の影響

東藤貢

応用力学研究所・佐賀大学合同研究集会「人工関節のバイオメカニクスとバイオマテリアル」  2009.9 

Contact stress analysis for artificial knee joints during gait and flexional motions International conference

M. Todo, Yuji Takahashi, Ryuji Nagamine, Shunji Hirokawa

World Tribology Congress 2009  2009.9 

Biomechanical risk assessment for fully edentulous maxilla with dental implants International conference

Takaaki Arahira, M. Todo, Y. Mastushita and K. Koyano

Nano/Amorphous Materials and Interface Science Symposium  2009.8 

Characterization of microstructure and mechanical properties of biodegradable PLLA polymer blends with LTI International conference

Vilay Vannaladsaysy and Mitsugu Todo

Nano/Amorphous Materials and Interface Science Symposium  2009.8 

Characterization of microstructure and mechanical properties of biodegradable PLLA polymer blends with LTI International conference

Vilay Vannaladsaysy, Mitsugu Todo

Nano/Amorphous Materials and Interface Science Symposium  2009.8 

Tailoring mechanical properties of PLLA-based scaffolds by structural control International conference

Joo-Eon Park, M. Todo

Nano/Amorphous Materials and Interface Science Symposium  2009.8 

生体吸収性複合系スキャホールドの圧縮変形挙動と細胞接着性

東藤貢、朴冑彦、瀧健太郎、大嶋正裕

M&M2009材料力学カンファレンス  2009.7 

PS型人工膝関節UHMWPEインサートの深屈曲時応力状態に及ぼす内旋と内・外反の影響