九州大学-研究者情報 [矢代茂樹 (教授) 工学研究院航空宇宙工学部門]

矢代茂樹（やしろしげき）

データ更新日：2024.04.08

教授　／　工学研究院航空宇宙工学部門航空宇宙機構造強度講座

原著論文

1.	Sota Onodera, Koki Kawahara, Shigeki Yashiro, Damage progression and strength prediction of open-hole CFRP laminates containing ply gaps, Engineering Fracture Mechanics, https://doi.org/10.1016/j.engfracmech.2023.109681, 293, 109681, 2023.12.
2.	Sota Onodera, Kazuki Ryuzono, Shigeki Yashiro, Tomonaga Okabe, Three-dimensional analytical model for composite laminate with transverse cracks by assuming parabolic crack opening, ADVANCED COMPOSITE MATERIALS, https://doi.org/10.1080/09243046.2023.2167481, 32, 6, 866-888, 2023.11.
3.	Kazuki Ryuzono, Shigeki Yashiro, Sota Onodera, Nobuyuki Toyama, Lamb wave mode conversion and multiple-reflection mechanisms for simply and reliably evaluating delamination in composite laminates, ADVANCED COMPOSITE MATERIALS, 10.1080/09243046.2022.2146564, 32, 5, 749-766, 2023.09.
4.	Shu Kumabe, Shigeki Yashiro, Sota Onodera, Evaluation of the frictional effect on the energy release rate in doubly end-notched tension test for mode II delamination, Engineering Fracture Mechanics, https://doi.org/10.1016/j.engfracmech.2023.109354, 288, 109354, 2023.08.
5.	松田伸也, 村松星彦, 矢代茂樹, 黄木景二, パンチおよびドリル穿孔を有するCFRP積層板の有孔圧縮強度および破壊形態, 日本複合材料学会誌, 49, 2, 48-56, 2023.03.
6.	Kazuki Ryuzono, Shigeki Yashiro, Sota Onodera, Nobuyuki Toyama, Performance evaluation of crack identification using density-based topology optimization for experimentally visualized ultrasonic wave propagation, Mechanics of Materials, https://doi.org/10.1016/j.mechmat.2022.104406, 172, 104406, 2022.09.
7.	小野寺壮太, 豊島夏樹, 矢代茂樹, 逐次端面観察とデジタル画像相関法による積層欠陥を有する自動積層模擬CFRP積層板の損傷進展観察, 日本複合材料学会誌, 48, 4, 123-133, 2022.07.
8.	Takeshi Minoda, Hiroto Nagai, Shigeki Yashiro, Nobuhide Uda, Aeroelastic effect of corrugation for an insect-sized flapping wing, AIAA Journal, https://doi.org/10.2514/1.J061027, 60, 5, 3180-3193, 2022.05.
9.	Shinya Matsuda, Keiji Ogi, Shigeki Yashiro, Characterization of piercing damage in CFRP cross-ply laminates after punch shear machining via impact loading, Journal of Composite Materials, https://doi.org/10.1177/00219983211031627, 55, 28, 4111-4124, 2021.12.
10.	Shigeki Yashiro, Tomohiro Yamasaki, Hiroto Nagai, Akinori Yoshimura, Effect of material nonlinearity on the toughness evaluation in quasi-static mode II interlaminar fracture toughness tests of composite laminates, ENGINEERING FRACTURE MECHANICS, 10.1016/j.engfracmech.2021.107879, 253, 107879, 2021.08.
11.	Keiji Ogi, Shigeki Yashiro, Effect of the fiber cut angle on the shearing strength of unidirectional and cross-ply carbon-fiber-reinforced thermoplastic laminate, Composites Part B, 10.1016/j.compositesb.2021.108869, 216, 108869, 2021.06.
12.	矢代茂樹, 伊藤晃, 松宮飛翔, 辻孝鴻, 大矢豊大, 松崎亮介, 岡部朋永, 複合材構造のCompression RTM成形における樹脂含浸時間予測, 日本複合材料学会誌, https://doi.org/10.6089/jscm.46.92, 46, 3, 92-97, 2020.05.
13.	Sota Oshima, Akinori Yoshimura, Shigeki Yashiro, Yoshiyasu Hirano, Toshio Ogasawara, Experimental and analytical validation of mode II fracture toughness tests for a type of double-lap joint, Composite Structures, 10.1016/j.compstruct.2019.111757, 234, 111757, 2020.02.
14.	Kazuki Ryuzono, Shigeki Yashiro, Hiroto Nagai, Nobuyuki Toyama, Topology optimization-based damage identification using visualized ultrasonic wave propagation, Materials, 10.3390/ma13010033, 13, 1, 33, 2020.01.
15.	Shigeki Yashiro, Tatsuya Okuda, Keiji Ogi, Masaaki Nishikawa, Hiroto Nagai, Simple approach for modeling unidirectionally arrayed chopped strand laminates via the extended finite-element method, Composite Structures, 10.1016/j.compstruct.2019.111457, 229, 111457, 2019.12.
16.	Shigeki Yashiro, Ryuji Ono, Keiji Ogi, Effect of machining conditions on the trimming damage in composite laminates induced by out-of-plane shearing, Journal of Materials Processing Technology, 10.1016/j.jmatprotec.2019.04.025, 271, 463-475, 2019.09, [URL], Fast machining is essential for mass production of composite structures, and out-of-plane shearing, also known as die cutting, is appropriate for trimming. Nevertheless, little is known about shearing of polymer-matrix composites. This study was done to investigate the damaging impact of shearing conditions on carbon fiber reinforced plastic (CFRP) laminates. The clearance and temperature affected the damage progress, while the cutting speed in the tested range had negligible effect. In cross-ply laminates, delamination and matrix cracks first appeared in a narrow shearing zone, and with further loading longitudinal plies broke at the dies’ edges. Although delamination occurred only in a narrow shear-stress concentrated zone in the case of a small clearance, it was significant for a large clearance, owing to the local bending deformation. A temperature slightly lower than the glass transition temperature narrowed the delamination area, owing to the increase in the interlaminar fracture toughness as well as insignificant strength degradation of the matrix..
17.	Shigeki Yashiro, Daichi Nakashima, Yutaka Oya, Tomonaga Okabe, Ryosuke Matsuzaki, Particle simulation of dual-scale flow in resin transfer molding for process analysis, Composites Part A: Applied Science and Manufacturing, 10.1016/j.compositesa.2019.03.038, 121, 283-288, 2019.06, [URL], Modeling the inhomogeneous microstructures of fibrous tows is important for analyzing the process of resin transfer molding because dual-scale pores in a preform can lead to void formation. This study focused on the development of a microscopic flow analysis method to predict the impregnation of fiber bundles. The moving particle semi-implicit method was adopted to model the microstructure of a fiber bundle explicitly and inter-particle potential force was introduced into the numerical model to take account for the capillary effect. The predicted process of impregnation and void formation agreed with empirical observations. The developed approach was applied to predict the relationship between the modified capillary number and void content to identify the optimal molding conditions to reduce microvoids. The obtained relationship reproduced the trends of a reported experiment, which indicates that the proposed approach will provide information about optimal conditions for minimizing void content..
18.	Ryosuke Matsuzaki, Tomohiro Ishikawa, Tomonaga Okabe, Yutaka Oya, Shigeki Yashiro, Stiffness and permeability multi-objective optimization of carbon-fiber-reinforced plastic mesostructures using homogenization method, Journal of Composite Materials, 10.1177/0021998318812160, 53, 13, 1865-1880, 2019.06, [URL], This paper presents a stiffness and permeability multi-objective optimization method for carbon-fiber-reinforced plastic mesostructures based on a homogenization method. To reduce the computational cost of dealing with multiple design variables for complicated fiber mesostructures, we generate and extract effective design variables from optimization results derived from a smaller number of design variables. We applied the proposed method to optimization of the in-plane and out-of-plane stiffness and permeability of non-crimp fabrics. The optimization results showed that the application of effective design variables enabled attainment of an improved elastic modulus and permeability. From investigations of the obtained optimized design, we clarified the trade-off relationship between the elastic modulus and permeability, and elucidated the effects of dimensions of non-crimp fabric mesostructures on the elastic modulus and permeability..
19.	Shigeki Yashiro, Keiji Ogi, Experimental study on shear-dominant fiber failure in CFRP laminates by out-of-plane shear loading, Journal of Composite Materials, 10.1177/0021998318801454, 53, 13, 1337-1346, 2019.05, [URL], Understanding the shear behavior and resulting fiber failure of fiber-reinforced plastics is required for better prediction of their behavior during the machining process, but knowledge regarding the shear strength of fiber failure is limited. In this study, out-of-plane shear tests were conducted to observe the shear behavior of carbon fiber-reinforced plastic laminates subjected to high shear stress exceeding the shear strength of matrix failure. The longitudinal fibers in carbon fiber-reinforced plastic unidirectional laminates were cut by shear loading without severe internal damage and the maximum shear stress causing progressive fiber breaks was much higher than the shear strength of matrix failure. This result suggested the possibility of out-of-plane shearing as a machining method for fiber-reinforced plastics and shear tests were subsequently performed for carbon fiber-reinforced plastic cross-ply laminates. Delamination was generated by high shear stress to cut the reinforcing fibers, but the size of the remaining damage was small even in the thermoset carbon fiber-reinforced plastic laminates in which delamination likely occurs, without any optimization of the trimming conditions..
20.	Nobuyuki Toyama, Jiaxing Ye, Wataru Kokuyama, Shigeki Yashiro, Non-contact ultrasonic inspection of impact damage in composite laminates by visualization of Lamb wave propagation, Applied Sciences (Switzerland), 10.3390/app9010046, 9, 1, No. 46, 2018.12, [URL], This study demonstrates a rapid non-contact ultrasonic inspection technique by visualization of Lamb wave propagation for detecting impact damage in carbon fiber reinforced polymer (CFRP) laminates. We have developed an optimized laser ultrasonic imaging system, which consists of a rapid pulsed laser scanning unit for ultrasonic generation and a laser Doppler vibrometer (LDV) unit for ultrasonic reception. CFRP laminates were subjected to low-velocity impact to introduce barely visible impact damage. In order to improve the signal-to-noise ratio of the detected ultrasonic signal, retroreflective tape and a signal averaging process were used. We thus successfully visualized the propagation of the pulsed Lamb A ₀ mode in the CFRP laminates without contact. Interactions between the Lamb waves and impact damage were clearly observed and the damage was easily detected through the change in wave propagation. Furthermore, we demonstrated that the damage could be rapidly detected without signal averaging. This method has significant advantages in detecting damage compared to the conventional method using a contact resonant ultrasonic transducer due to the absence of the ringing phenomenon when using the LDV..
21.	Shigeki Yashiro, Toshihide Agata, Akinori Yoshimura, A new approach for evaluating crack growth resistance curve of mode II delamination by doubly end-notched tension tests, Advanced Composite Materials, 10.1080/09243046.2017.1373384, 27, 2, 119-133, 2018.03.
22.	矢代茂樹, 安形俊秀, 吉村彰記, 二重端面切欠き引張試験による複合材料積層板のモードII層間破壊じん性評価法の提案と検証, 日本複合材料学会誌, 10.6089/jscm.44.19, 44, 1, 19-24, 2018.01.
23.	Rozaini Othman, Keiji Ogi, Koichi Mizukami, Shigeki Yashiro, Experimental and numerical characterization of low-velocity impact damage of a CFRP laminate with interlayers, 材料システム, 35, 29-35, 2017.03.
24.	Shigeki Yashiro, Jumpei Wada, Yoshihisa Sakaida, A monitoring technique for disbond area in carbon fiber–reinforced polymer bonded joints using embedded fiber Bragg grating sensors: Development and experimental validation, Structural Health Monitoring-An International Journal, 16, 2, 185-201, 2017.03.
25.	Shigeki Yashiro, Application of particle simulation methods to composite materials: A review, Advanced Composite Materials, 10.1080/09243046.2016.1222508, 26, 1, 1-22, 2017.01.
26.	Tomonaga Okabe, Yutaka Oya, Junki Sato, Tsubasa Matsumiya, Ryosuke Matsuzaki, Shigeki Yashiro, Shigeru Obayashi, Multi-objective optimization for resin transfer moulding, Composites Part A, 10.1016/j.compositesa.2016.09.023, 92, 1-9, 2017.01.
27.	Rozaini Othman, Keiji Ogi, Shigeki Yashiro, Characterization of microscopic damage due to low-velocity and high-velocity impact in CFRP with toughened interlayers, Mechanical Engineering Journal, 3, 6, 16-00151, 2016.12.
28.	Rozaini Othman, Keiji Ogi, Shigeki Yashiro, Low-velocity impact damage behaviour of a CFRP laminate toughened with interleaf layers, The 10th Asian-Australasian Conference on Composite Materials (ACCM-10), M4-5, 2016.10.
29.	Hoshihiko Muramatsu, Shinya Matsuda, Shigeki Yashiro, Keiji Ogi, Compressive strength and fractography of CFRP laminates after piercing process by punch press, Asia-Pacific Conference on Fracture and Strength 2016 (APCFS2016), 357-358, 2016.09.
30.	Tomohiro Ishikawa, Ryosuke Matsuzaki, Tomonaga Okabe, Shigeki Yashiro, Design exploration of non-crimp fabric for resin transfer molding by the GP using AIC and TOL, Canada-Japan-Vietnam Workshop on Composites, MAT8073, 2016.08.
31.	Yutaka Oya, Tsubasa Matsumiya, Tomonaga Okabe, Ryosuke Matsuzaki, Shigeki Yashiro, Optimum gates design for resin transfer moulding process in dual scale porous media, 17th US-Japan Conference on Composite Materials, No. 49, 2016.08.
32.	Tomohiro Ishikawa, Ryosuke Matsuzaki, Tomonaga Okabe, Shigeki Yashiro, Meso-structure optimization of non-crimp fabric for resin transfer molding, The 13th International Conference on Flow Processing in Composite Materials (FPCM 13), PAPER 6, 2016.07.
33.	Shigeki Yashiro, Yoshihisa Sakaida, Yoshinobu Shimamura, Yoku Inoue, Evaluation of interfacial shear stress between multi-walled carbon nanotubes and epoxy based on strain distribution measurement using Raman spectroscopy, Composites Part A, 85, 192-198, 2016.06.
34.	松田伸也, 黄木景二, 矢代茂樹, 熱硬化性CFRP積層板のパンチプレス加工による穿孔の特徴と加工品質, 日本複合材料学会誌, 42, 1, 13-22, 2016.01.
35.	Rozaini Othman, Keiji Ogi, Shigeki Yashiro, Characteristic of low-velocity and high-velocity impact damage on CFRP toughened with interleave layer, International Conference on Advanced Technology in Experimental Mechanics 2015 (ATEM’15), OS-9-6, 2015.10.
36.	Shigeki Yashiro, Tomonaga Okabe, Smoothed particle hydrodynamics in a generalized coordinate system with a finite-deformation constitutive model, International Journal for Numerical Methods in Engineering, 10.1002/nme.4906, 103, 11, 781-797, 2015.09.
37.	Shigeki Yashiro, Yoshihisa Sakaida, Yoshinobu Shimamura, Yoku Inoue, Evaluation of interfacial shear stress of carbon nanotube/epoxy composites using raman spectroscopy, South-East-Asia-Japan Conference on Compsite Materials (SEAJCCM), 23-25, 2015.09.
38.	Shigeki Yashiro, Jumpei Wada, Yoshihisa Sakaida, Estimation of fatigue induced disbonded area in CFRP double-lap joints using embedded FBG sensors, 14th Japanese-European Symposium on Composite Materials, ExtAbst_Yashiro, 2015.09.
39.	Shigeki Yashiro, Keiji Ogi, Akinori Yoshimura, Yoshihisa Sakaida, Experimental and numerical characterization of high-velocity impact damage in CFRP laminates, 20th International Conference on Composite Materials (ICCM20), no. 5117-2, 2015.07.
40.	Keiji Ogi, Shigeki Yashiro, Effect of temperature and clearance on shear cutting behaviors in CFRP laminates, 20th International Conference on Composite Materials (ICCM20), no. 4301-3, 2015.07.
41.	Shigeki Yashiro, Ryuji Ono, Keiji Ogi, Yoshihisa Sakaida, Prediction of shear-cutting process of CFRP cross-ply laminates using smoothed particle hydrodynamics, 16th US-Japan Conference on Composite Materials, No. 747, 2014.09.
42.	Yoshihisa Sakaida, Tomohito Inayama, Shigeki Yashiro, Estimation of cross-sectional residual stress distribution on hardened layer of carburized chromium-molybdenum steel by electron backscattering diffraction method, Advanced Materials Research, 996, 556-561, 2014.08.
43.	Manabu Takahashi, Shigeki Yashiro, Keiji Ogi, Nagatoshi Okabe, Estimation of foreign-object damage to silicon carbide plates by silicon nitride spherical projectiles, Procedia Materials Science, 3, 83-89, 2014.07.
44.	坂井田喜久, 稲山朝仁, 矢代茂樹, 電子線後方散乱回折法による浸炭焼入鋼の硬化層深さと残留応力の評価, 材料, 63, 7, 557-562, 2014.07.
45.	Yoshihisa Sakaida, Tomohito Inayama, Shigeki Yashiro, Indirect estimation of residual stress distribution on hardened layer of carburized chromium-molybdenum steel by electron backscattering diffraction method, 9th European Conference on Residual Stresses (ECRS-9), 26, 2014.07.
46.	Yoshihisa Sakaida, Hajime Yoshida, Shigeki Yashiro, Shohei Yamashita, Takahisa Shobu, Internal residual strain distribution in chromium-molybdenum steel after carburizing and quenching measured by neutron strain scanning, Materials Science Forum, 772, 173-177, 2014.02.
47.	Yoshihisa Sakaida, Hajime Yoshida, Shigeki Yashiro, Toshiyuki Murai, Influence of final hand polishing process on surface residual stress field of Japanese sword, Materials Science Forum, 768-769, 492-499, 2014.01.
48.	Shigeki Yashiro, Keiji Ogi, Akinori Yoshimura, Yoshihisa Sakaida, Characterization of high-velocity impact damage in CFRP laminates: Part II- prediction by smoothed particle hydrodynamics, Composites Part A, 10.1016/j.compositesa.2013.04.012, 56, 308-318, 2014.01.
49.	Shigeki Yashiro, Katsunori Ishii, Yoshihisa Sakaida, Multiphase compression molding simulation for long-fiber-reinforced plastics by a particle method, 13th Japan International SAMPE Symposium & Exhibition (JISSE13), ID 1702, 2013.11.
50.	Ryuji Ono, Shigeki Yashiro, Keiji Ogi, Yoshihisa Sakaida, Damage evolution in CFRP laminates by shear cutting: experiment and numrical analysis, 13th Japan International SAMPE Symposium & Exhibition (JISSE13), ID 1604, 2013.11.
51.	Shigeki Yashiro, Keiji Ogi, Tsukasa Nakamura, Akinori Yoshimura, Characterization of high-velocity impact damage in CFRP laminates: Part I- experiment, Composites Part A, 10.1016/j.compositesa.2012.12.015, 48, 93-100, 2013.05.
52.	坂井田喜久, 矢代茂樹, 吉田始, クロムモリブデン鋼の浸炭硬化層の機械的およびＸ線的弾性定数に及ぼす炭素濃度の影響, 材料, 62, 5, 335-341, 2013.05.
53.	吉田始, 坂井田喜久, 中村保, 早川邦夫, 磯谷章, 矢代茂樹, 外径絞りあるいは内径拡張を伴う冷間押出しによるスプライン穴を持つ平歯車の成形, 塑性と加工, 54, 626, 262-266, 2013.03.
54.	Tomonaga Okabe, Hiroaki Matsutani, Takashi Honda, Shigeki Yashiro, Numerical simulation of microscopic flow in a fiber bundle using the moving particle semi-implicit method, Composites Part A, 43, 10, 1765-1774, 2012.10.
55.	Shigeki Yashiro, Hideaki Sasaki, Yoshihisa Sakaida, Particle simulation for predicting fiber motion in injection molding of short-fiber-reinforced composites, Composites Part A, 10.1016/j.compositesa.2012.05.002, 43, 10, 1754-1764, 2012.10.
56.	吉田始, 沢木洋三, 坂井田喜久, 中村保, 早川邦夫, 矢代茂樹, 異種層状円筒試料の押出しによる歯車の成形 , 塑性と加工, 53, 621, 929-933, 2012.10.
57.	高橋市弥, 伊藤悠策, 矢代茂樹, 武田真一, 岩堀豊, 高坪淳治, 岡部洋二, 武田展雄, レーザー励起弾性波可視化手法を用いたCFRPスカーフ補修構造の損傷検出, 日本複合材料学会誌, 38, 5, 207-215, 2012.09.
58.	高橋市弥, 伊藤悠策, 矢代茂樹, 高坪淳治, 武田真一, 岩堀豊, 岡部洋二, 武田展雄, CFRP損傷検出のためのパルスレーザー励起弾性波伝搬特性評価, 実験力学, 12, 3, 220-226, 2012.09.
59.	Shigeki Yashiro, Keiji Ogi, Masashi Oshita, High-velocity impact damage behavior of plain-woven SiC/SiC composites after thermal loading, Composites Part B, 10.1016/j.compositesb.2011.11.021, 43, 3, 1353-1362, 2012.04.
60.	Tomonaga Okabe, Shigeki Yashiro, Damage detection in holed composite laminates using an embedded FBG sensor, Composites Part A, 43, 3, 388-397, 2012.03.
61.	Shigeki Yashiro, Tomonaga Okabe, Estimation of fatigue damage in holed composite laminates using an embedded FBG sensor, Composites Part A, 10.1016/j.compositesa.2011.08.021, 42, 12, 1962-1969, 2011.12.
62.	Shigeki Yashiro, Tomonaga Okabe, Kisa Matsushima, A numerical approach for injection molding of short-fiber-reinforced plastics using a particle method, Advanced Composite Materials, 10.1163/092430411X584423, 20, 6, 503-517, 2011.11.
63.	Keiji Ogi, Manabu Takahashi, Shigeki Yashiro, Empirical models for matrix cracking in a CFRP cross-ply laminate under static- and cyclic-fatigue loadings, Polymer Composites, 32, 10, 1652-1660, 2011.10.
64.	駒形大輔, 岡部朋永, 矢代茂樹, 吉村彰記, 小笠原俊夫, 柔軟体衝突を受けるCFRP積層板の損傷解析, 日本複合材料学会誌, 37, 5, 164-171, 2011.09.
65.	Katsunori Ishii, Taro Matsushita, Shinpei Sakka, Makoto Matsui, Shigeki Yashiro, Yoshiki Yamagiwa, Development of propellant feeding system for stardust propulsion, The 28th International Symposium on Space Technology and Science (ISTS), 2011-b-67p, 2011.06.
66.	矢代茂樹, 結合力要素を用いた円孔を有するCFRPクロスプライ積層板の疲労損傷進展の評価, 材料, 60, 5, 425-431, 2011.05.
67.	黄木景二, 田中孝明, 矢代茂樹, 吉村彰記, CFRP一方向積層板および直交積層板における高速衝撃損傷, 材料, 60, 5, 418-424, 2011.05.
68.	Shigeki Yashiro, Nobuyuki Toyama, Junji Takatsubo, Tetsuro Shiraishi, Laser-generation based imaging of ultrasonic wave propagation on welded steel plates and its application to defect detection, Materials Transactions, 51, 11, 2069-2075, 2010.11.
69.	Keiji Ogi, Shigeki Yashiro, Manabu Takahashi, Akinori Yoshimura, Numerical and experimental characterization of high-speed impact damage in CFRP unidirectional and cross-ply laminates, The 7th Asian-Australasian Conference on Composite Materials, TUE-SE11-01, 2010.11.
70.	Keiji Ogi, Ryuichi Kitahara, Manabu Takahashi, Shigeki Yashiro, Effect of stress ratio on fatigue transverse cracking in a CFRP laminate, 5th International Conference on Fatigue of Composites (ICFC5), 44-53, 2010.10.
71.	Keiji Ogi, Shigeki Yashiro, Akinori Yoshimura, Effect of impact speed on high-speed impact damage in CFRP unidirectional and cross-ply laminates, 14th US-Japan Conference on Composite Materials, No. 1041, 2010.09.
72.	Shigeki Yashiro, Keiji Ogi, Toshihiro Yamamoto, Takahiro Watanabe, A simple approach for determining the characteristic distance in the point stress criterion for holed CFRP unidirectional laminates, Advanced Composite Materials, 19, 3, 243-259, 2010.07.
73.	Keiji Ogi, Tomonaga Okabe, Manabu Takahashi, Shigeki Yashiro, Akinori Yoshimura, Toshio Ogasawara, Experimental characterization of high-speed impact damage behavior in a three-dimensionally woven SiC/SiC composite, Composites Part A, 41, 4, 489-498, 2010.04.
74.	Keiji Ogi, Shigeki Yashiro, Koji Niimi, A probabilistic approach for transverse crack evolution in a composite laminate under variable amplitude cyclic loading, Composites Part A, 41, 3, 383-390, 2010.03.
75.	矢代茂樹, 岡部朋永, 松島紀佐, 粒子法を用いた短繊維強化プラスチックの射出成形解析, 日本複合材料学会誌, 36, 1, 11-18, 2010.01.
76.	Keiji Ogi, Shinji Ogihara, Shigeki Yashiro, A probabilistic SCG model for transverse cracking in CFRP cross-ply laminates under cyclic loading, Advanced Composite Materials, 19, 1, 1-17, 2010.01.
77.	Shigeki Yashiro, Tomonaga Okabe, Numerical prediction of fatigue damage progress in holed CFRP laminates using cohesive elements, Journal of Solid Mechanics and Materials Engineering, 3, 11, 1212-1221, 2009.11.
78.	Tomonaga Okabe, Shigeki Yashiro, Numerical simulation for predicting fatigue damage progress in notched CFRP laminates by using cohesive elements, Journal of Solid Mechanics and Materials Engineering, 3, 11, 1202-1211, 2009.11.
79.	Keiji Ogi, Tomonaga Okabe, Akinori Yoshimura, Shigeki Yashiro, High speed impact damage in CFRP unidirectional and cross-ply laminates, 11th Japan International SAMPE Symposium & Exhibition (JISSE-11), PMC_4_1, 2009.11.
80.	黄木景二, 矢代茂樹, 確率的SCGモデルとエネルギー解放率を用いたトランスバースクラックに関する疲労破壊クライテリオン, 日本複合材料学会誌, 35, 5, 212-220, 2009.09.
81.	Takumasa Yamaguchi, Tomonaga Okabe, Shigeki Yashiro, Fatigue simulation for Titanium/CFRP hybrid laminates using cohesive elements, Composites Science and Technology, 69, 11-12, 1968-1973, 2009.09.
82.	Akira Kadoya, Shigeki Yashiro, Tomonaga Okabe, Prediction of fatigue damage in holed composite laminates with embedded FBG sensors, 17th International Conference on Composite Materials (ICCM-17), 31:B8:8, 2009.07.
83.	Keiji Ogi, Shigeki Yashiro, Tomonaga Okabe, Akinori Yoshimura, Toshio Ogasawara, A characterization study on high speed impact damage in CFRP laminates, 17th International Conference on Composite Materials (ICCM-17), 30:F7:2, 2009.07.
84.	Shigeki Yashiro, Tomonaga Okabe, Estimating fatigue damage in a CFRP laminate with a hole using an embedded FBG sensor, 12th International Conference on Fracture (ICF 12), T22.011, 2009.07.
85.	Shigeki Yashiro, Keiji Ogi, Fracture behavior in CFRP cross-ply laminates with initially cut fibers, Composites Part A, 10.1016/j.compositesa.2009.04.023, 40, 6-7, 938-947, 2009.06.
86.	矢代茂樹, 岡部朋永, 結合力要素を用いた有孔CFRP積層板の疲労損傷進展解析, 日本機械学会論文集A編, 75, 751, 310-315, 2009.03.
87.	岡部朋永, 矢代茂樹, 結合力要素を用いた切欠きを有するCFRPクロスプライ積層板の疲労損傷進展シミュレーション, 日本機械学会論文集A編, 75, 751, 304-309, 2009.03.
88.	Keiji Ogi, Shigeki Yashiro, Manabu Takahashi, Shinji Ogihara, A probabilistic static fatigue model for transverse cracking in CFRP cross-ply laminates, Composites Science and Technology, 69, 3-4, 469-476, 2009.03.
89.	Akinori Yoshimura, Tomoaki Nakao, Shigeki Yashiro, Nobuo Takeda, Improvement on out-of-plane impact resistance of CFRP laminates due to through-the-thickness stitching, Composites Part A, 39, 9, 1370-1379, 2008.09.
90.	Shigeki Yashiro, Keiji Ogi, Tetsuro Shiraishi, Numerical study for predicting tensile damage progress in CFRP laminates with initial fiber cracks, The 6th Asia-Australasian Conference on Composite Materials (ACCM-6), 379-382, 2008.09.
91.	Keiji Ogi, Shigeki Yashiro, Shinji Ogihara, An SCG-based probabilistic model for transverse cracking in CFRP cross-ply laminates under creep loading, The 6th Asia-Australasian Conference on Composite Materials (ACCM-6), 164-167, 2008.09.
92.	黄木景二, 山本俊浩, 矢代茂樹, 渡部敬裕, 端部切欠きをもつ一方向不連続繊維強化プラスチックの破壊基準, 材料, 57, 7, 725-731, 2008.07.
93.	Keiji Ogi, Shigeki Yashiro, Tomonaga Okabe, Akinori Yoshimura, Toshio Ogasawara, Effect of thermal shock on ballistic impact damage in ceramic matrix composites, 13th US-Japan Conference on Composite Materials, (HTC1)-1-(HTC1)-7, 2008.06.
94.	Shigeki Yashiro, Junji Takatsubo, Nobuyuki Toyama, Tomonaga Okabe, Nobuo Takeda, Nondestructive evaluation of holed CFRP laminates by a new technique to visualize propagation of ultrasonic waves, Journal of Solid Mechanics and Materials Engineering, 2, 3, 333-341, 2008.03.
95.	矢代茂樹, 高坪純治, 遠山暢之, パルスレーザを利用した超音波伝搬の可視化とCFRP積層板の衝撃損傷評価への適用, 日本複合材料学会誌, 34, 2, 60-65, 2008.03.
96.	Shigeki Yashiro, Junji Takatsubo, Hidekazu Miyauchi, Nobuyuki Toyama, A novel technique for visualizing ultrasonic waves in general solid media by pulsed-laser scan, NDT & E International, 41, 2, 137-144, 2008.03.
97.	矢代茂樹, 高坪純治, 遠山暢之, ラム波伝搬の可視化を用いたCFRP航空機接着構造の非破壊検査, 非破壊検査, 57, 2, 96-100, 2008.02.
98.	吉村彰記, 矢代茂樹, 武田展雄, 円孔を有する縫合CFRP積層板の損傷進展, 日本複合材料学会誌, 34, 1, 14-20, 2008.01.
99.	Shigeki Yashiro, Junji Takatsubo, Nobuyuki Toyama, An NDT technique for composite structures using visualized Lamb-wave propagation, Composites Science and Technology, 67, 15-16, 3202-3208, 2007.12.
100.	Shigeki Yashiro, Takeo Shokinji, Tomonaga Okabe, Tetsuro Shiraishi, Stress analysis for composite laminates with transverse ply cracks using a particle method, 10th Japan International SAMPE Symposium & Exhibition (JISSE-10), NUMERICAL MODELING-1-2, 2007.11.
101.	Takumasa Yamaguchi, Shigeki Yashiro, Tomonaga Okabe, Numerical simulation for fatigue damage progress in CFRP cross-ply laminates using cohesive elements, 10th Japan International SAMPE Symposium & Exhibition (JISSE-10), NUMERICAL MODELING-2-1, 2007.11.
102.	Keiji Ogi, Manabu Takahashi, Tomonaga Okabe, Akinori Yoshimura, Shigeki Yashiro, Characterization of foreign object damage in ceramics and ceramic matrix composites, 10th Japan International SAMPE Symposium & Exhibition (JISSE-10), MMC,CMC,C/C,HT-Appl-3-4, 2007.11.
103.	Yusaku Ito, Ichiya Takahashi, Shin-ichi Takeda, Yutaka Iwahori, Shigeki Yashiro, Junji Takatsubo, Yoji Okabe, Nobuo Takeda, Impact damage detection in scarf-repaired composites by visualization of ultrasonic wave propagation using pulsed laser, 10th Japan International SAMPE Symposium & Exhibition (JISSE-10), AEROSPACE-3-4, 2007.11.
104.	Ichiya Takahashi, Yusaku Ito, Shin-ichi Takeda, Yutaka Iwahori, Shigeki Yashiro, Junji Takatsubo, Nobuo Takeda, Debonding detection in scarf-repaired CFRP laminates using Lamb-wave visualization by generation laser scanning method, 6th International Workshop on Structural Health Monitoring, 2015-2022, 2007.09.
105.	Akinori Yoshimura, Shigeki Yashiro, Tomonaga Okabe, Nobuo Takeda, Characterization of tensile damage progress in stitched CFRP laminates, Advanced Composite Materials, 16, 3, 223-244, 2007.07.
106.	Akinori Yoshimura, Tomoaki Nakao, Shigeki Yashiro, Nobuo Takeda, Characterization of out-of-plane impact damage in stitched CFRP laminates, 16th International Conference on Composite Materials (ICCM-16), TuHM1-04, 2007.07.
107.	Ichiya Takahashi, Yusaku Ito, Shin-ichi Takeda, Yutaka Iwahori, Shigeki Yashiro, Junji Takatsubo, Nobuo Takeda, Impact damage detection on scarf-repaired composites using Lamb wave sensing, 16th International Conference on Composite Materials (ICCM-16), MoBA2-05, 2007.07.
108.	矢代茂樹, 高坪純治, 宮内秀和, 遠山暢之, パルスレーザの走査による構造材料中の超音波伝播の可視化と損傷検出への適用, 構造物の安全性および信頼性, 6, 391-396, 2007.06.
109.	Shigeki Yashiro, Kazue Murai, Tomonaga Okabe, Nobuo Takeda, Numerical study for identifying damage in open-hole composites with embedded FBG sensors and its application to experiment results, Advanced Composite Materials, 16, 2, 115-134, 2007.03.
110.	Shigeki Yashiro, Nobuo Takeda, Inverse analysis for estimating damage patterns in notched composite laminates using an embedded FBG sensor, Journal of Solid Mechanics and Materials Engineering, 1, 3, 310-321, 2007.03.
111.	Junji Takatsubo, Shigeki Yashiro, Hiroshi Tsuda, Nobuyuki Toyama, Jung-Ryul Lee, Toshimichi Ogisu, Nondestructive detection of delamination and debonding of CFRP by a laser-based ultrasonic visualization method, SPIE Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring 14th International Symposium, 6531, No. 653108, 2007.03.
112.	Shigeki Yashiro, Tomonaga Okabe, Nobuo Takeda, Damage identification in a holed CFRP laminate using a chirped fiber Bragg grating sensor, Composites Science and Technology, 67, 2, 286-295, 2007.02.
113.	Shigeki Yashiro, Tomonaga Okabe, Nobuyuki Toyama, Nobuo Takeda, Monitoring damage in holed CFRP laminates using embedded chirped FBG sensors, International Journal of Solids and Structures, 44, 2, 603-613, 2007.01.
114.	矢代茂樹, 高坪純治, 遠山暢之, 岡部朋永, 武田展雄, 超音波伝ぱの可視化による有孔CFRP積層板中の層間はく離検出, 日本機械学会論文集A編, 72, 724, 1882-1887, 2006.12.
115.	Junji Takatsubo, Shigeki Yashiro, Bo Wang, Hiroshi Tsuda, Nobuyuki Toyama, Laser ultrasonic imaging technique for nondestructive inspection of defects in three-dimensional objects, Asia-Pacific Workshop on Structural Health Monitoring, No.011, 2006.12.
116.	矢代茂樹, 村井一恵, 岡部朋永, 武田展雄, 埋め込みFBGセンサを用いた有孔積層板の損傷同定に関する数値解析および実験結果への適用, 日本複合材料学会誌, 32, 5, 208-217, 2006.09.
117.	吉村彰記, 矢代茂樹, 岡部朋永, 武田展雄, 縫合CFRP積層材の引張負荷下における損傷進展挙動, 日本複合材料学会誌, 32, 5, 198-207, 2006.09.
118.	Nobuo Takeda, Shigeki Yashiro, Tomonaga Okabe, Estimation of the damage pattern in notched laminates with embedded FBG sensors, Composites Science and Technology, 66, 5, 684-693, 2006.05.
119.	Shigeki Yashiro, Tomonaga Okabe, Nobuo Takeda, Numerical study for predicting and identifying multiple damage in a holed composite laminate using an embedded FBG sensor, International Conference on Computational & Experimental Engineering and Sciences (ICCES'05), 1109-1114, 2005.12.
120.	Nobuyuki Toyama, Shigeki Yashiro, Junji Takatsubo, Tomonaga Okabe, Stiffness evaluation and damage identification in composite beam under tension using Lamb waves, Acta Materialia, 53, 16, 4389-4397, 2005.09.
121.	Shigeki Yashiro, Tomonaga Okabe, Nobuo Takeda, Damage monitoring of CFRP laminates with open holes using chirped FBG sensors, American Society for Composites 20th Annual Technical Conference , No. 118, 2005.09.
122.	矢代茂樹, 武田展雄, 埋め込みFBG光ファイバセンサを用いたCFRP複合材積層板内の損傷形態推定手法の提案, 日本機械学会論文集A編, 71, 706, 897-904, 2005.06.
123.	Shigeki Yashiro, Nobuo Takeda, Tomonaga Okabe, Hideki Sekine, A new approach to predicting multiple damage states in composite laminates with embedded FBG sensors, Composites Science and Technology, 65, 3-4, 659-667, 2005.03.
124.	Shigeki Yashiro, Tomonaga Okabe, Nobuo Takeda, Damage identification in notched CFRP laminates with embedded FBG sensors, 11th US-Japan Conference on Composite Materials, Damage15-1-4, 2004.09.
125.	Shigeki Yashiro, Tomonaga Okabe, Nobuo Takeda, Inverse analysis for damage identification in CFRP laminates with embedded FBG sensors, The 4th Asian-Australasian Conference on Composite Materials (ACCM-4), 993-998, 2004.07.
126.	Masaaki Nishikawa, Shigeki Yashiro, Tomonaga Okabe, Nobuo Takeda, Damage identification of double-edge-notched CFRP cross-ply laminate with embedded FBG sensor using response surface for reflection spectrum, 8th Japan International SAMPE Symposium & Exhibition (JISSE-8), 577-580, 2003.11.
127.	Shigeki Yashiro, Tomonaga Okabe, Nobuo Takeda, Identification of multiple damage state in CFRP laminate with embedded FBG sensor using optimization technique, 8th Japan International SAMPE Symposium & Exhibition (JISSE-8), 525-528, 2003.11.
128.	Nobuo Takeda, Yoji Okabe, Shin-ichi Takeda, Shigeki Yashiro, Tadahito Mizutani, Damage detection of composite laminates with small-diameter fiber Bragg grating sensors, American Society for Composites 18th Annual Technical Conference, Paper 156, 2003.10.
129.	Nobuo Takeda, Yoji Okabe, Shigeki Yashiro, Shin-ichi Takeda, Tadahito Mizutani, Ryohei Tsuji, Application of embedded small-diameter fiber Bragg grating sensors for fabrication and health monitoring of composite laminates, 14th International Conference on Composite Materials, CD-ROM, 2003.07.
130.	Yoji Okabe, Shigeki Yashiro, Ryohei Tsuji, Tadahito Mizutani, Nobuo Takeda, Effect of thermal residual stress on the reflection spectrum from fiber Bragg grating sensors embedded in CFRP laminates, Composites Part A: Applied Science and Manufacturing, 33, 7, 991-999, 2002.07.
131.	Yoji Okabe, Tadahito Mizutani, Shigeki Yashiro, Nobuo Takeda, Detection of microscopic damages in composite laminates with embedded small-diameter fiber Bragg grating sensors, Composites Science and Technology, 62, 7-8, 951-958, 2002.06.
132.	Nobuo Takeda, Yoji Okabe, Shigeki Yashiro, Shin-ichi Takeda, Tadahito Mizutani, Ryohei Tsuji, Real-time damage detection in composite laminates with embedded small-diameter fiber Bragg grating sensors, The 8th Japanese-European Symposium on Composite Materials, 215-224, 2002.04.
133.	Yoji Okabe, Shigeki Yashiro, Ryohei Tsuji, Tadahito Mizutani, Nobuo Takeda, Effect of thermal residual stress on the reflection spectrum from FBG sensors embedded in CFRP composites, Nondestructive Evaluation and Health Monitoring of Aerospace Materials and Civil Infrastructures, 4704, 59-68, 2002.03.
134.	Yoji Okabe, Nobuhira Tanaka, Tadahito Mizutani, Shigeki Yashiro, Nobuo Takeda, Effect of fiber coatings on detection of transverse cracks in CFRP composites using FBG sensors, 10th International Conference on Fracture (ICF10), 4590-32138-1-PB, 2001.12.
135.	Yoji Okabe, Tadahito Mizutani, Shigeki Yashiro, Nobuo Takeda, Application of small-diameter FBG sensors for detection of damages in composites, Smart Structures and Materials 2001: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, 4328, 295-305, 2001.03.
136.	Yoji Okabe, Shigeki Yashiro, Tatsuro Kosaka, Nobuo Takeda, Detection of transverse cracks in CFRP composites using embedded fiber Bragg grating sensors, Smart Materials and Structures, 9, 6, 832-838, 2000.12.
137.	Nobuo Takeda, Yoji Okabe, Shigeki Yashiro, Real-time damage detection of composite laminates with embedded Bragg grating sensors, 14th International Conference on Optical Fiber Sensors (OFS-14), 4185, 42-45, 2000.10.
138.	Shigeki Yashiro, Yoji Okabe, Tatsuro Kosaka, Nobuo Takeda, Detection of transverse cracks in composites using fiber Bragg grating sensors, The Second Asian-Australasian Conference on Composite Materials (ACCM-2000), 1071-1078, 2000.08.
139.	Yoji Okabe, Shigeki Yashiro, Tatsuro Kosaka, Nobuo Takeda, Application of embedded FBG sensors for detection of damages in CFRP composites, The Ninth US-Japan Conference on Composite Materials, 175-182, 2000.07.
140.	Yoji Okabe, Shigeki Yashiro, Tatsuro Kosaka, Nobuo Takeda, Detection of transverse cracks in composites by using embedded FBG sensors, Smart Structures and Materials 2000: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, 3986, 282-291, 2000.03.

九大関連コンテンツ

pure2017年10月2日から、「九州大学研究者情報」を補完するデータベースとして、Elsevier社の「Pure」による研究業績の公開を開始しました。

QIR　九州大学学術情報リポジトリシステム情報科学研究院

工学部・工学研究院


	※ 研究者情報全体を検索する場合は右端の「すべて」を選択して下さい。