Kyushu University Academic Staff Educational and Research Activities Database
Researcher information (To researchers) Need Help? How to update
Tsuyoshi YAMAMOTO Last modified date:2023.09.27

Associate Professor / Production system engineering
Department of Chemical Engineering
Faculty of Engineering


Graduate School
Undergraduate School


E-Mail *Since the e-mail address is not displayed in Internet Explorer, please use another web browser:Google Chrome, safari.
Homepage
https://kyushu-u.elsevierpure.com/en/persons/tsuyoshi-yamamoto
 Reseacher Profiling Tool Kyushu University Pure
Academic Degree
Doctor of Engineering
Field of Specialization
Transport Phenomena, Heat Transfer, Combustion
Research
Research Interests
  • Study of Ammonia Synthesis
    keyword : Ammonia
    2021.04.
  • Study of Carbon Dioxide Capture and Utilization
    keyword : Carbon dioxide
    2020.04.
  • Study of Combustion Enhancement using Microwave Plasma
    keyword : Microwave Plasma
    2010.04.
  • Study of Continuous PM Removal Equipment using Fluidized Bed
    keyword : Adhesion force, PM2.5
    2008.04.
  • Development of Cooling Method of high temperature materials using fine mist
    keyword : Phase change, Fine mist
    2009.04.
  • Kinetic Study of Mechanism of Fuel NO Formation
    keyword : Fuel NO, Detailed Reaction Mechanism, Flow Reactor
    2007.04.
  • Analysis of Pulverized Coal Combustor Applied to Reburing
    keyword : Pulverized Coal Combustion, Reburing, Numerical Simulation
    2008.04.
Academic Activities
Papers
1. T. Yamamoto, Y. Imamura, M. Kishida, Development and Combustion Characteristics of Microwave Plasma Assisted Fluidized Bed Combustor, Advanced Powder Technology, vol.402, 117336, 2022.10.
2. Kento Yokoo, Masahiro Kishida, Tsuyoshi Yamamoto, CFD-IBM-DEM simulation for elucidation of PM filtration mechanisms
in fluidized bed filter, Powder Technology, vol.402, 117336, 2022.03.
3. K. Yokoo, T. Yamazaki, M. Kishida, T. Yamamoto, Increase in processing flue gas flow rate while maintaining the fluidization state and filtration performance in a low-temperature continuous regeneration filter using a fluidized bed, Advanced Powder Technology, Vol. 33, 103508, 2022.03.
4. T. Yamamoto, S. Uchiyama, M. Kishida, R. Tanaka, Influence of Nozzle Shape on Partial Oxidation Reforming of Biogas using Microwave Plasma, Energy & Fuels, vol. 35, No. 5, pp.4203-4211, 2021.03.
5. K. Yokoo, M. Kishida, T. Yamamoto, Numerical investigation of PM filtration in fluidized-bed-type PM removal device based on force balance via CFD-DEM simulation, Powder Technology, vol.380, pp. 506-517, 2021.03.
6. K. Yokoo, A. Wakizaka, M. Kishida, T. Yamamoto, Experimental and numerical investigation of catalytic PM combustion in a fluidized bed type PM removal device for low-temperature continuous regeneration, Advanced Powder Technology, Vol. 32, pp. 151-165, 2021.01.
7. K. Yokoo, M. Kishida, T. Yamamoto, Parallelization of DEM simulation on distributed-memory computer via three-dimensional slice grid method, Mechanical Engineering Letters, vol.6, 20-00444, 2020.11.
8. K. Yokoo, A. Kusu, M. Kishida, J. Tatebayashi, T. Yamamoto, PM combustion enhancement to reduce continuous regeneration temperature of fluidized bed type PM removal device using catalyst-doped bed particle, Chemical Engineering Journal, vol.388, 124247, 2020.05.
9. K. Yokoo, H. Matsune, M. Kishida, J. Tatebayashi, T. Yamamoto, Kinetic modeling of PM combustion with relative velocity at low-temperature and numerical simulation of continuous regenerating type PM removal device that uses a fluidized bed, Advanced Powder Technology, Vol. 31, pp. 718-729, 2020.02.
10. K. Yokoo, H. Matsune, M. Kishida, J. Tatebayashi, T. Yamamoto, Promoting effect of water vapor on particle matter combustion in a low-temperature continuous regeneration type PM removal device using a fluidized bed, Powder Technology, vol.355, pp. 657-666, 2019.10.
11. Yusuke Asakuma, Itsuro Honda, Tsuyoshi Yamamoto, Numerical approach to predicting the effective thermal conductivity of a packed bed of binary particles, Powder Technology, vol.354, pp. 886-892, 2019.09.
12. Takahisa Yamamoto, Kazuhiro Ishimaru, Kahar Osman, Mohamad Ikhwan Kori, Ahmad Zaharan Khudzari, Ishkrizat Taib, Tsuyoshi Yamamoto, Numerical Simulation of Concentration Over-voltage in a Polymer Electrolyte Fuel Cell under Low-Hydrogen Conditions, International Journal of Integrated Engineering, vol.323, pp. 86-94, 2018.10.
13. Tsuyoshi Yamamoto, Kento Yokoo, Akitaka Kusu, June Tatebayashi, Highly efficient particulate matter removal by a fluidized-bed-type device operated in continuous regeneration mode, Powder Technology, vol.323, pp. 86-94, 2018.01.
14. Tsuyoshi Yamamoto, Shuhei Kajimura, Kinetic study on NO reduction using dimethyl ether as a reburning fuel, Energy & Fuels, vol. 31, No. 11, pp.12500-12507, 2017.11.
15. Yusuke Asakuma, Itsuro Honda, Tsuyoshi Yamamoto, Numerical analysis of effective thermal conductivity with thermal conduction and radiation in packed beds, International Journal of Heat and Mass Transfer, vol.114, pp. 402-406, 2017.11.
16. Yusuke Asakuma, Tsuyoshi Yamamoto, Thermal analysis of resin composites with ellipsoidal filler considering thermal boundary resistance, Journal of Thermal Science, vol. 25, No. 6, pp.424-430, 2016.10.
17. Yusuke Asakuma, Tsuyoshi Yamamoto, Thermal analysis of porous medium with ellipsoidal pores using a homogenization method, Heat and Mass Transfer, vol. 52, No. 10, pp.2113-2117, 2016.10.
18. Tsuyoshi Yamamoto, Takahiro Tsuboi, Yoshiho Iwama, Ryo Tanaka, Combustion and Reformulation Enhancement Characteristics of Plasma-Assisted Spray Combustion by Microwave Induced Non-Equilibrium Plasma, Energy & Fuels, Vol.30, No.4, P.3495-3501, 2016.04.
19. Yusuke Asakuma, Masahiro Asada, Yushin Kanazawa, Tsuyoshi Yamamoto, Thermal analysis with contact resistance of packed bed by a homogenization method, Powder Technology, vol.291, pp. 46-51, 2016.03.
20. Tsuyoshi Yamamoto, Kenta Hori, June Tatebayashi, An experimental investigation of the PM adhesion characteristics in a fluidized bed type PM removal device, Powder Technology, vol.289, pp. 31-36, 2016.02.
21. Tsuyoshi Yamamoto, Takahiro Tsuboi, June Tatebayashi, A numerical simulation of PM adhesion characteristics in a fluidized bed type PM removal device by a finite volume Eulerian-Eulerian method, Powder Technology, vol.288, pp. 26-34, 2016.01.
22. Yusuke Asakuma, Yushin Kanazawa, Masahiro Asada, Tsuyoshi Yamamoto, Anisotropy of effective thermal conductivity analysis of heat transfer coefficient distribution around spherical particles in a packed bed, Computer Assisted Methods in Engineering and Science, vol.22, pp. 31-38, 2015.10.
23. Yusuke Asakuma, Yushin Kanazawa, Tsuyoshi Yamamoto, Thermal radiation analysis of packed bed by a homogenization method, International Journal of Heat and Mass Transfer, vol.73, pp. 97-102, 2014.04.
24. Tsuyoshi Yamamoto, Takuya Kuwahara, Kakeru Yishino, Koichi Nakaso, Takahisa Yamamoto, Numerical Investigation of Cooling Characteristics for Fine Mist Cooling of High Temperature Material, Computational Thermal Sciences, vol.5 No. 1, pp.69-78, 2014.01.
25. Yusuke Asakuma, Tsuyoshi Yamamoto, Effective Thermal Conductivity with Convection and Radiation in Packed Bed, Journal of Energy and Power Engineering, Vol.7, No.4, P.639-646, 2013.04.
26. Tsuyoshi Yamamoto, Ryosuke Imazato, Takahisa Yamamoto, Ryo Tanaka, Spray Combustion Characteristics of Waste Oil and System Analysis for Energy System Using Microwave Induced Non-Equilibrium Plasma, Energy & Fuels, Vol.27, No.4, P.2283-2289, 2013.04.
27. Yusuke Asakuma, Tsuyoshi Yamamoto, Effective Thermal Conductivity of Porous materials and Composites as a Function of Fundamental Structural Parameters, Computer Assisted Methods in Engineering and Science, Vol.20, No.2, P.89-98, 2013.02.
28. H.S. Kim, Nozomi Wada, Nozawa Sohey, Yohsuke Matsushita, Tsuyoshi Yamamoto, Motohira Oomori, Tatsuro Harada, Jin Miyawaki, Seongho Yoon, Isao Mochida, Comparison of Partial Oxidation Reaction and Gasification of Loy Yang Brown Coal in air (O2/N2) and Oxy-fuel (O2/CO2) condition, Journal of Novel Carbon Resource Sciences, Vol.6 2012, P.29-35, 2012.12.
29. Tsuyoshi Yamamoto, Takuya Kuwahara, Koichi Nakaso, Takahisa Yamamoto, Kinetic study of fuel NO formation from pyrrole type nitrogen, Fuel, Vol.93 2012, P.213-220, 2012.03.
30. S.Nozawa, N.Wada, Y.Matsushita, T.Yamamoto, M.Oomori, T.Harada, Experimental and Numerical Investigation of Effect of Coal Rank on Burn-off Time in Pulverized Coal Combustion, Journal of Novel Carbon Resource Sciences, Vol.5 2012, P.23-27, 2012.02.
31. M. Shoji, T. Yamamoto, S. Tanno, H. Aoki, T. Miura, Modeling Study of Homogeneous NO and N2O Formation from the Oxidation of HCN in a Flow Reactor, ENERGY, Vol.30, No.2-4, pp.337-345, 2005.03.
32. Y. Asakuma, S. Miyauchi, T. Yamamoto, H. Aoki, T. Miura, Homogenization Method for Effective Thermal Conductivity of Metal Hydride Bed, International Journal of Hydrogen Energy, Vol. 29, No.2, pp.209-216, 2004.02.
33. M. Yaga, K. Suzuki, H. Endo, T. Yamamoto, H. Aoki, T. Miura, Improvement of the pressure-velocity coupling method based on SIMPLER algorithm, Journal of Chemical Engineering of Japan, Vol. 36, No.11, pp. 1318-1326, 2003.11.
34. Y. Asakuma, M. Soejima, T. Yamamoto, H. Aoki, T. Miura, New Estimation Method of Coke Strength by Numerical Multiscale Analysis, ISIJ International, Vol. 43, No.8, pp. 1151-1158, 2003.08.
35. Y. Asakuma, S. Miyauchi, T. Yamamoto, H. Aoki, T. Miura, Numerical Analysis of Absorbing and Desorbing Mechanism for Metal Hydride by Homogenization Method, International Journal of Hydrogen Energy, Vol. 28, No.5, pp 529-536, 2003.05.
36. A. Suzuki, T. Yamamoto, H. Aoki, T. Miura, Percolation Model for Simulation of Coal Combustion Process, Proceedings of The Combustion Institute, 29-(1), pp.459-466, 2002.07.
37. M. Yaga, H. Endo, T. Yamamoto, H. Aoki, T. Miura, Modeling of Eddy Characteristic Time in LES for Calculating Turbulent Diffusion Flame, International Journal of Heat and Mass Transfer, 45, pp.2343-2349, 2002.05.
38. Tsuyoshi Yamamoto, Tomonaga Miyazaki, Tomohiko Furuhata, Norio Arai, Noriyuki Kobayashi, Takatoshi Miura, Temperature Profile in the Pressurized Methane-Air Combustor, Journal of Flow Visualization and Image Processing, Vol. 5, pp.51-62, 1998.05.
39. Tsuyoshi Yamamoto, Noriyuki Kobayashi, Norio Arai, Tadashi Tanaka, Effect of Pressure on Fuel-Rich Combustion of Methane-Air under High Pressure, Energy Conversion and Management, Vol. 38, No. 10-13, pp.1093-1100, 1997.10.
Presentations
1. K. Yokoo, T. Yamamoto, M. Kishida, CFD-IBM-DEM Analysis of PM Filtration in Fluidized Bed Based on Force Balance to Evaluate Operation Conditions, AIChE 2020, 2020.11.
2. K. Yokoo, T. Yamamoto, H. Matsune, M. Kishida, J. Tatebayashi, Kinetic modeling of Low-Temperature PM combustion with Relative Velocity in the presence of Water Vapor, AIChE 2019, 2019.11.
3. T. Yamamoto, S. Uchiyama, H. Matsune, M. Kishida, Improvement of gasification efficiency with consideration for microwave input power on biogas reformulation by microwave plasma assisted combustion, 26th Regional Symposium on Chemical Engineering, 2019.10.
4. K. Yokoo, T. Yamamoto, H. Matsune, M. Kishida, J. Tatebayashi, CFD-DEM analysis of PM filtration due to adhesion force using fluidized bed, APPChE 2019, 2019.09.
5. T. Yamamoto, K. Yokoo, H. Matsune, M. Kishida, J. Tatebayashi, Reduction of continuous regeneration temperature by potassium catalysis in fluidized bed type PM removal device, European Aerosol Conference EAC 2019, 2019.08.
6. T. Yamamoto, K. Yokoo, H. Matsune, M. Kishida, J. Tatebayashi, PM combustion enhancement effect and reaction mechanism by potassium in continuous regeneration type PM removal device, 11th Asian Aerosol Conference, 2019.05.
7. T. YAMAMOTO, A. KUSU, H. MATSUNE, M. KISHIDA, J. TATEBAYASHI, PROMOTION OF PM OXIDATION REACTION BY POTASSIUM CATALYSIS IN CONTINUOUS REGENERATION TYPE PM REMOVAL DEVICE, The 29th International Symposium on Transport Phenomena, 2018.10.
8. T. Yamamoto, S. Uchiyama, H. Matsune, M. Kishida, Effect of Microwave attenuation in Microwave Plasma Assisted Combustion of Biogas, The 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, 2018.08.
9. Kishida Masahiro, Yanagi Tokito, Kim Gangsan, Matsune Hideki, Yamamoto Tsuyoshi, Effects of silica-coating on catalytic behavior of supported Pt catalysts for alkane dehydrogenation, 化学工学会第83年会, 2018.03.
10. T. Yamamoto, S. Uchiyama, H. Matsune, M. Kishida, Combustion and Reformulation Characteristics of Biogas in Plasma Assisted Combustion Using Microwave induced Non-equilibrium Plasma, 11th Asian Pacific Confederation on Combustion, 2017.12.
11. T. Yamamoto, Y. Kobayashi, T. YAMAMOTO, Aerosol transport characteristics during exhalation period, 10th World Congress of Chemical Engineering, 2017.10.
12. Y. ASAKUMA, T. YAMAMOTO, Numerical investigation for effective thermal conductivity in packed bed composed of various packed structures, 10th World Congress of Chemical Engineering, 2017.10.
13. T. YAMAMOTO, K. YOKOO, A. KUSU, J. TATEBAYASHI, Effect of bed temperature on fluidized bed type PM removal device, 10th World Congress of Chemical Engineering, 2017.10.
14. K. YOKOO, T. YAMAMOTO, J. TATEBAYASHI, Kinetic modeling of carbon oxidation on continuous regeneration at low temperature of numerical simulation of fluidized bed type PM removal device, 10th World Congress of Chemical Engineering, 2017.10.
15. Kento YOKOO, Tsuyoshi YAMAMOTO, June TATEBAYASHI, Effect of water vapor in continuous regeneration type PM removal device using fluidized bed, ISChE2016, 2016.12.
16. Tsuyoshi YAMAMOTO, Akitaka KUSU, June TATEBAYASHI, Effect of Mineral Addition in Continuously Regenerating Type PM Removal Device Using Fluidized Bed, ISTP 27, 2016.09.
17. Tsuyoshi YAMAMOTO, Kakeru Yoshino, Takuya Kuwahara, Heat Transfer Characteristics in Fine Mist Impinging Jet Using Heated Laminated Wall, IX International Conference on Computational Heat and Mass Transfer, 2016.05.
18. Tsuyoshi YAMAMOTO, Akitaka KUSU, June TATEBAYASHI, Effect of Combustion Enhancement by Kalium in Continuously Regenerating Type PM Removal Device Using Fluidized Bed, APCChE 2015, 2015.09.
19. Tsuyoshi YAMAMOTO, Akitaka KUSU, June TATEBAYASHI, A Study of the Effect of PM Diameter and Bed Temperature in Fluidized Bed Type PM Removal Device, 25th International Symposium on Transport Phenomena, 2014.11.
20. Tsuyoshi YAMAMOTO, Takahiro TSUBOI, Yoshiho IWAMA, Ryo TANAKA, An Experimental Investigation of Oil Gasification Process by Microwave Induced Non-Equilibrium Plasma Combustion, 35th International Symposium on Combnustion, 2014.08.
21. Tsuyoshi YAMAMOTO, Kakeru Yoshino, Takuya Kuwahara, An Investigation of Cooing Characteristics in Air-Mist Cooling by Eulerian-Lagrangian Method with V2F Model, 11th World Congress on Computational Mechanics, 2014.07.