| 1. |
K. Edalati, J. Hidalgo-Jimenez, T. T. Nguyen, Mechanochemical response of adenosine monophosphate to high-pressure torsion and Comparison with amino acids, 日本金属学会2024年春期大会, 2024.03. |
| 2. |
K. Edalati, High-entropy alloys for room-temperature hydrogen storage, JIMM Workshop on Sharing Issues in Materials Science Related to Hydrogen, 2023.10. |
| 3. |
K. Edalati, Severe plastic deformation and the origin of life, The Second International Workshop on Superfunctional Energy/Nano Materials (SENM2023), 2023.09. |
| 4. |
K. Edalati, High-entropy alloys for room-temperature hydrogen storage, Annual Fall Meeting of The Japan Institute of Metals and Materials, 2023.09. |
| 5. |
K. Edalati, Ultra-severe plastic deformation for room-temperature superplasticity and superfunctionality, The 14th International Conference on Superplasticity in Advanced Materials (ICSAM), 2023.07. |
| 6. |
K. Edalati, I. Taniguchi, R. Floriano, A. Ducati Luchessi, High-pressure torsion: from miniature earthquake to the origin of life, The 12th International Conference on Processing and Manufacturing of Advanced Materials, Processing, Fabrication, Properties and Applications (THERMEC), 2023.07. |
| 7. |
T. Rahman, B. Dikici, H. Yılmazer, K. Edalati, H. Hermawan, C.J. Boehlert, The microstructure and hardness of Zn-3(wt.%)Mg powders processed via high pressure torsion, TMS Annual Meeting and Exhibition, 2023.03. |
| 8. |
J. Hidalgo-Jimenez, T. Akbay, T. Ishihara, K. Edalati, High-pressure columbite TiO2 as an active photocatalyst: Ab initio calculations and experiments by high-pressure torsion, Annual Spring Meeting of The Japan Institute of Metals and Materials, 2023.03. |
| 9. |
N. Hata, H. Miyamoto, M. Yuasu, K. Edalati, Effect of grain refinement on the corrosion behavior of CoCrFeNiMn and CoCrFeNi high entropy alloys, Annual Spring Meeting of The Japan Institute of Metals and Materials, 2023.03. |
| 10. |
K. Edalati, I. Taniguchi, R. Floriano, A. Ducati Luchessi, Application of high-pressure torsion to amino acids as essential molecules for life, Annual Spring Meeting of The Japan Institute of Metals and Materials, 2023.03. |
| 11. |
S. Dangwal, K. Edalati, Reversible Hydrogen Storage in High Entropy Alloy TiV2ZrCrMnFeNi at Room Temperature, Annual Spring Meeting of The Japan Institute of Metals and Materials,, 2023.03. |
| 12. |
P. Edalati, X.F. Shen, M. Watanabe, T. Ishihara, M. Arita, M. Fuji, K. Edalati, High-entropy oxynitride as a low-bandgap and stable photocatalyst for hydrogen production, The 8th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD8), 2023.02. |
| 13. |
K. Edalati, From functional nanomaterials to the origin of life by high-pressure torsion, The 8th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD8), 2023.02. |
| 14. |
J. Hidalgo-Jimenez, T. Akbay, T. Ishihara, K. Edalati, High-pressure columbite TiO2 as an active photocatalyst: Ab initio calculations and experiments by high-pressure torsion, 8th International Conference on Nanostructured Materials by Severe Plastic Deformation (NanoSPD8), 2023.02. |
| 15. |
S. Akrami, M.Watanabe, T.H. Ling, T. Ishihara, M. Arita, M. Fuji, K, Edalati, High-pressure TiO2-II polymorph as an active photocatalyst for CO2 to CO conversion, The 8th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD8), 2023.02. |
| 16. |
H. Miyamoto, N. Hata, M. Yuasa, K. Edalati, Effect of Cr content on corrosion behavior of nanostructured CoCrFeMnNi and CoCrFeNi high-entropy alloys processed by high-pressure torsion, International Workshop on High-Entropy Alloys, 2023.02. |
| 17. |
S. Akrami, M.Watanabe, T.H. Ling, T. Ishihara, M. Arita, M. Fuji, K, Edalati, High-pressure TiO2-II polymorph as an active photocatalyst for CO2 to CO conversion, The 59th Symposium on Powder Science and Technology, 2022.12. |
| 18. |
P. Edalati, X.F. Shen, M. Watanabe, T. Ishihara, M. Arita, M. Fuji, K. Edalati, High-entropy oxynitride as a low-bandgap and stable photocatalyst for hydrogen production, The 59th Symposium on Powder Science and Technology, 2022.12. |
| 19. |
S. Akrami, M.Watanabe, T.H. Ling, T. Ishihara, M. Arita, M. Fuji, K, Edalati, High-pressure TiO2-II polymorph as an active photocatalyst for CO2 to CO conversion, Tokai Branch Meeting of Ceramic Society of Japan, 2022.12. |
| 20. |
P. Edalati, X.F. Shen, M. Watanabe, T. Ishihara, M. Arita, M. Fuji, K. Edalati, High-entropy oxynitride as a low-bandgap and stable photocatalyst for hydrogen production, Tokai Branch Meeting of Ceramic Society of Japan, 2022.12. |
| 21. |
Y. Ikeda, F. Körmann, K. Edalati, B. Grabowski, Ab initio simulations for mechanical and hydrogen-storage properties of high-entropy alloys, The Seventh International Conference on Electronic Materials and Nanotechnology for Green Environment, 2022.11. |
| 22. |
R. Floriano, G. Zepon, K. Edalati, G. Andrade, A. Mohammadi, Z. Ma, H.W. Li, Crystal structure and hydrogen storage properties of AB-type TiZrNbCrFeNi high-entropy alloy, The XX SBPMat, 2022.09. |
| 23. |
M. Novelli, A. Mohammadi, M. Arita, J.W. Bae, T. Grosdidier, H.S. Kim, K. Edalati, Hydrogen embrittlement of a CrMnFeCoNi high-entropy alloy treated by ultrasonic shot peening, International Conference on the Strength of Materials, 2022.06. |
| 24. |
X. Sauvage, F. Cuvilly, A. Russel, K. Edalati, Mechanical and electrical properties of a nanostructured Al-Ca alloy, International Conference on the Strength of Materials, 2022.06. |
| 25. |
P. Edalati, X.F. Shen, ＠M. Watanabe, ＠T. Ishihara, ＠M. Arita, M. Fuji, ＠K. Edalati, High-entropy oxynitride as a low-bandgap and stable photocatalyst for hydrogen production, The 14th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 14), 2021.12. |
| 26. |
S. Akrami, M. Watanabe, T.H. Ling, T. Ishihara, M. Arita, M. Fuji, K. Edalati, High-pressure TiO2-II polymorph as an active photocatalyst for CO2 to CO conversion, The 14th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 14), 2021.12. |
| 27. |
H. Shimizu, M. Yuasa, H. Miyamoto, K. Edalati, Effect of grain size on corrosion resistance of CoCrFeNiMn HEA”, The 168th JIM Annual Spring Meeting, The 168th JIM Annual Spring Meeting, Online, 2021.05. |
| 28. |
K. Asanuma, H. Miyamoto, M. Yuasa, K. Edalati, Corrosion behavior of ultrafine Fe-Cr alloys processed by HPT processing, The 168th JIM Annual Spring Meeting, Online, 2021.03. |
| 29. |
K. Edalati, Pressure and strain effect on amino acids: an insight into the origin of life, The First International Workshop on Multifunctional Energy/Nano Materials (MENM2020), 2020.02. |
| 30. |
K. Edalati, Ultra-severe plastic deformation for new functional phases, The International Conference on Plasticity, Damage and Fracture (ICPDF), 2020.01. |
| 31. |
H.W. Li, K. Edalati, R. Uehiro, Y. Ikeda, H. Emami, Y. Filinchuk, M. Arita, X. Sauvage, I. Tanaka, E. Akiba, Z. Horita, Design of Mg-based alloys for room temperature hydrogen storage, 2019 E-MRS Fall Meeting and Exhibition, 2019.10. |
| 32. |
K. Edalati, Advanced energy materials by high-pressure torsion, International Academic Forum on Advanced Materials and Intelligent Manufacturing, 2019.10. |
| 33. |
K. Edalati, Ultra-severe plastic deformation, The 6th International Symposium on Bulk Nanostructured Materials from Fundamentals to Innovations (BNM), 2019.09. |
| 34. |
R. Floriano, K. Edalati, Synthesis and characterization of high entropy alloys based on TiFe system, The XVIII SBPMat, 2019.09. |
| 35. |
J. Hidalgo Jimenez, J.M. Cubero-Sesin, K. Edalati, S. Khajavi, J. Huot, Effect of HPT process in the first hydrogenation of Ti0.5Zr0.5(Mn1-xFex)Cr1 , x = 0, 0.2 and 0.4, The XVIII SBPMat, 2019.09. |
| 36. |
T. Grosdidier, M. Novelli, K. Edalati, Recent advances of surface mechanical attrition treatment for improved subsurface hardening and H-storage applications, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2019), 2019.09. |
| 37. |
K. Edalati, I. Fujita, X. Sauvage, Z. Horita, Phase transition and microstructural evolution in Al2O3 by high-pressure torsion, The 165th JIM Annual Fall Meeting, 2019.09. |
| 38. |
I. Fujita, K. Edalati, Q. Wang, S. Monetoh, Z. Horita, Developing new photocatalysts in MgO using high-pressure torsion, The 165th JIM Annual Fall Meeting, 2019.09. |
| 39. |
Q. Wang, K. Edalati, Y. Koganemaru, S. Nakamura, M. Watanabe, T. Ishihara, Z. Horita, Photocatalytic activity of ZrO2 processed by HPT, The 165th JIM Annual Fall Meeting, 2019.09. |
| 40. |
T. Nishizaki, K. Edalati, S. Lee, Z. Horita, T. Akune, T. Nojima, S. Iguchi, T. Sasaki, Type II superconductivity and vortex structures in bulk nanostructured Ta processed by high pressure torsion, Annual Fall Meeting of the Physical Society of Japan, 2019.09. |
| 41. |
K. Edalati, Ultra-severe plastic deformation, The 6th International Symposium on Bulk Nanostructured Materials from Fundamentals to Innovations (BNM), 2019.09. |
| 42. |
K. Edalati, High-pressure torsion for new hydrogen storage materials, The World Fuel Cell Conference (WFCC), 2019.08. |
| 43. |
Q. Wang, K. Edalati, H. Eguchi, H. Razavi-Khosroshahi, H. Emami, M. Yamauchi, M. Fuji, Z. Horita, Electrocatalytic hydrogen generation on HPT-processed titanium dioxide, The World Fuel Cell Conference (WFCC), 2019.08. |
| 44. |
T. Ishihara, L. Liu, K. Edarati, Z. Horita, High pressure torsion treatment of Y2O3 for increased NO direct decomposition activity, The 8th Asia Pacific Congress on Catalysis (APCAT-8), 2019.08. |
| 45. |
K. Edalati, High-pressure torsion for new hydrogen storage materials, The World Fuel Cell Conference (WFCC), 2019.08. |
| 46. |
K. Edalati, Z. Horita, R.Z. Valiev, Toward room-temperature superplasticity in Al alloy, Mechanical Engineering Multi-Conference, The 6th International Conference on Advanced Processes and Systems in Manufacturing, 2019.08. |
| 47. |
X. Sauvage, F. Cuvilly, A. Russell, K. Edalati, Multifunctional properties of nanostructured Al stabilized by Ca grain boundary segregations and intermetallic particles, The 146th TMS Annual Meeting and Exhibition, 2019.03. |
| 48. |
K. Edalati, K. Kitabayashi, H.W. Li, E. Akiba, Z. Horita, Formation of Metastable Hydrides in MgH2-TiH2 System by HPT, The 164th JIM Annual Spring Meeting, 2019.03. |
| 49. |
Q. Wang, K. Edalati, H. Eguchi, H. Razavi-Khosroshahi, H. Emami, M. Yamauchi, M. Fuji, Z. Horita, Influence of high-pressure torsion on electrocatalytic activity of titanium oxide, The 164th JIM Annual Spring Meeting,, 2019.03. |
| 50. |
K. Edalati, Z. Horita, Plastic deformation of oxides by high-pressure torsion, The International Conference on Plasticity, Damage and Fracture (ICPDF), 2019.01. |
| 51. |
K. Edalati, Z. Horita, Powder processing by high-pressure torsion to achieve functionality, JSPM International Conference on Powder and Powder Metallurgy (JSPMIC2017), 2018.11. |
| 52. |
K. Edalati, BCC-Mg in comparison with Ti and Zr biomaterials, The 7th International Workshop on Giant Straining Process for Advanced Materials (GSAM2018), 2018.09. |
| 53. |
J.M. Cubero-Sesin, J.C. Gonzalez-Masis, A. Martínez, E. Ulate-Kolitsky, M. Chaves, H. Aguero, J.R. Vega-Baudrit, ＠K. Edalati, ＠Z. Horita, Phase transformations and aging behavior of pure Ti and Ti-6Al-7Nb processed by high-pressure torsion, The 7th International Workshop on Giant Straining Process for Advanced Materials (GSAM2018), 2018.09. |
| 54. |
K. Edalati, K. Kitabayashi, Y. Ikeda, J. Matsuda, H.W. Li, I. Tanaka, E. Akiba, Z. Horita, Gamma MgH2 produced by HPT processing, The 163th JIM Annual Fall Meeting, 2018.09. |
| 55. |
K. Edalati, Z. Horita, R.Z. Valiev, Transition from low-temperature superplasticity to room-temperature superplasticity by high-pressure torsion, The 13th International Conference on Superplasticity in Advanced Materials (ICSAM), 2018.08. |
| 56. |
H. Razavi-Khosroshahi, K. Edalati, Z. Horita, M. Fuji, High-Pressure Rocksalt ZnO as Visible-Light-Active Photocatalyst, The 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE), 2018.07. |
| 57. |
T. Grosdidier, K. Edalati, M. Novelli, S. Itano, H.W. Li, E. Akiba, Z. Horita, Modifying reactivity for hydrogen storage performance by surface mechanical attrition treatment: application to Ti-V-Cr alloys, The XIV Conference on Nanostructured Materials (NANO2018), 2018.06. |
| 58. |
K. Edalati, M. Novelli, S. Itano, H.W. Li, E. Akiba, Z. Horita, T. Grosdidier, Activation of Ti-V-Cr alloys for hydrogen storage by surface mechanical attrition treatment and high-pressure torsion, The 22nd World Hydrogen Energy Conference (WHEC), 2018.06. |
| 59. |
I. Fujita, K. Edalati, M. Arita, K. Kumano, Z. Horita, S. Takechi, T. Ishihara, Y. Nakashima, H. Razavi-Khosroshahi, M. Watanabe, M. Fuji, X. Sauvage, Developing a new photocatalyst from pure Al2O3 using high-pressure torsion, JIM Annual Kyushu Local Meeting, 2018.06. |
| 60. |
K. Edalati, H. Razavi-Khosroshahi, M. Fuji, Z. Horita, Influence of severe plastic deformation on photocatalytic performance of oxides, The XIV Conference on Nanostructured Materials (NANO2018), 2018.06. |
| 61. |
K. Edalati, M. Novelli, S. Itano, H.W. Li, E. Akiba, Z. Horita, T. Grosdidier,, Activation of Ti-V-Cr alloys for hydrogen storage by surface mechanical attrition treatment and high-pressure torsion, The 22nd World Hydrogen Energy Conference (WHEC), 2018.06. |
| 62. |
A. Duchaussoy, X. Sauvage, G. Renou, A. Deschamps, F. De Geuser, K. Edalati, Z. Horita, Influence of thermally induced grain growth on the precipitation kinetics and on the mechanical properties of an ultra-fine grain 7449 AA, The 16th International Conference on Aluminum Alloys (ICAA16), 2018.05. |
| 63. |
K. Edalati, High-pressure torsion and hydrogen storage materials, Workshop on Mechanochemistry for the Improvement of Metal Hydrides, 2018.05. |
| 64. |
M. Novelli, K. Edalati, S. Itano, H.W. Li, E. Akiba, Z. Horita, T. Grosdidier, Bulk and surface severe plastic deformation of Ti10V75Cr15 alloy for hydrogen storage, Workshop on Mechanochemistry for the Improvement of Metal Hydrides, 2018.05. |
| 65. |
K. Edalati, Z. Horita, Synthesis of nanocrystalline metastable phases by high-pressure torsion for energy applications, Advanced Energy Materials Congress, 2018.03. |
| 66. |
K. Edalati, Y. Hashiguchi, H. Iwaoka, H. Matsunaga, Z. Horita, Long-term microstructural stability of severely-deformed nanometals, The 162th JIM Annual Spring Meeting, 2018.03. |
| 67. |
K. Edalati, Z. Horita, Synthesis of nanocrystalline metastable phases by high-pressure torsion for energy applications, Advanced Energy Materials Congress, 2018.03. |
| 68. |
K. Edalati, Z. Horita, High-pressure torsion for manufacturing functional materials from powders, The 2nd European Conference on Materials, Mechatronics and Manufacturing (ECMMM 2018), 2018.02. |
| 69. |
K. Edalati, Z. Horita, Powder processing by high-pressure torsion to achieve functionality, JSPM International Conference on Powder and Powder Metallurgy (JSPMIC2017), 2017.11. |
| 70. |
K. Edalati, H. Razavi-Khosroshahi, M. Fuji, Z. Horita, Severe plastic deformation of oxides, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2017), 2017.09. |
| 71. |
K. Edalati, Ultra-severe plastic deformation, The 6th International Workshop on Giant Straining Process for Advanced Materials (GSAM2017), 2017.09. |
| 72. |
J.M. Cubero-Sesin, M. Arita, K. Edalati, Z. Horita, Aging behavior and electrical conductivity of Al-(Fe, Cr, Mn) alloys processed by high-pressure torsion, The 6th International Workshop on Giant Straining Process for Advanced Materials (GSAM2017), 2017.09. |
| 73. |
A. Duchaussoy, X. Sauvage, K. Edalati, Z. Horita, G. Renou, A. Deschamps, F. De Geuser, Ultrafine grain structure obtained in Al-Fe alloys by high-pressure torsion: thermal stability and mechanical properties, The 6th International Workshop on Giant Straining Process for Advanced Materials (GSAM2017), 2017.09. |
| 74. |
Y. Ikoma, K. Kumano, K. Edalati, M.R. McCartney, D.J. Smith, Z. Horita, TEM observations of Ge processed by high-pressure torsion, The 6th International Workshop on Giant Straining Process for Advanced Materials (GSAM2017), 2017.09. |
| 75. |
K. Kumano, Y. Ikoma, K. Edalati, K. Saito, Q. Guo, Z. Horita, Thermal effects on the formations of Si and Ge metastable phases during HPT processing, The 6th International Workshop on Giant Straining Process for Advanced Materials (GSAM2017), 2017.09. |
| 76. |
M. Mito, Y. Kitamura, R. Shiraish, K. Ogata, T. Tajiri, T. Nishizaki, K. Edalati, Z. Horita, Hydrostatic pressure effects on superconducting transition of bulk nanostructured niobium prepared by high-pressure torsion, The 6th International Workshop on Giant Straining Process for Advanced Materials (GSAM2017), 2017.09. |
| 77. |
H. Razavi-Khosroshahi, K. Edalati, M. Arita, M. Yamauchi, T. Ishihara, Z. Horita, M. Fuji, High-pressure phases of metal oxides as new generation of photocatalysts, The 6th International Workshop on Giant Straining Process for Advanced Materials (GSAM2017), 2017.09. |
| 78. |
K. Edalati, M. Novelli, S. Itano, H.W. Li, E. Akiba, Z. Horita, T. Grosdidier, Influence of surface and bulk mechanical straining on hydrogen storage performance of Ti-V-Cr alloys, The 161th JIM Annual Fall Meeting, 2017.09. |
| 79. |
K. Edalati, H. Razavi-Khosroshahi, M. Fuji, Z. Horita, Severe plastic deformation of oxides, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2017), 2017.09. |
| 80. |
R. Kirchheim, C. Borchers, Z. Horita, K. Edalati, Y. Li, D. Raabe, Nanocrystalline steels produced by ball milling, high pressure torsion and wire drawing, The 16th International Conference on Rapidly Quenched and Metastable Materials (RQ16), 2017.08. |
| 81. |
K. Edalati, D.J. Lee, T. Nagaoka, M. Arita, H.S. Kim, Z. Horita, R. Pippan, Evaluation of real achievable pressure in high-pressure torsion, The 15th International Conference on Advanced Materials (IUMRS-ICAM 2017), 2017.08. |
| 82. |
K. Edalati, E. Akiba, Z. Horita, Impact of severe plastic deformation on solid-state hydrogen storage, Frontiers in Materials Processing Applications, Research and Technology (FiMPART’17), 2017.07. |
| 83. |
K. Edalati, Z. Horita, Severe plastic deformation in the past, The 7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7), 2017.07. |
| 84. |
R. Uehiro, K. Edalati, H. Emami, H.W. Li, M. Arita, E. Akiba, Z. Horita, Developing Mg-based hydrogen storage alloys using high-pressure torsion, JIM Annual Kyushu Local Meeting, 2017.06. |
| 85. |
K. Fujiwara, R. Uehiro, K. Edalati, Z. Horita, Hydrogen storage characteristics of nanocrystalline Mg - V - Cr alloys processed by HPT, JIM Annual Kyushu Local Meeting, 2017.06. |
| 86. |
K. Edalati, Giant straining by HPT to produce UFG materials, The International Workshop on “New trends in research of UFG materials produced by SPD”, 2017.05. |
| 87. |
Y. Ikoma, Y. Kumano, B. Chon, K. Edalati, Z. Horita, M.R. McCartney, D.J. Smit, Microstructure observation of germanium subjected to severe plastic deformation, The 160th JIM Annual Spring Meeting, 2017.03. |
| 88. |
K. Edalati, K. Fujiwara, H.W. Li, E. Akiba, Z. Horita, Impact of HPT processing on Mg-V-based hydrogen storage alloys, The 160th JIM Annual Spring Meeting, 2017.03. |
| 89. |
K. Edalati,, Potential of metastable phases stabilized by high-pressure torsion for energy applications, The 10th International Workshop of PPG-CEM/UFSCar Application of Amorphous, Metastable, Nanostructures and Advanced Metallic Alloys, 2017.03. |
| 90. |
K. Edalati, R. Uehiro, Y. Ikeda, H.W. Li, H. Emami, M. Arita, I. Tanaka, E. Akiba, Z. Horita, Design of metastable hydrogen storage materials by binding-energy engineering, The 7th Latin American Conference on Metastable and Nanostructured Materials (NANOMAT 2017), 2017.03. |
| 91. |
K. Edalati, H. Razavi-Khosroshhai, M. Fuji, Z. Horita, High-pressure torsion of ceramics with functional properties, The 146th TMS Annual Meeting and Exhibition, 2017.02. |
| 92. |
A. Duchaussoy, X. Sauvage, K. Edalati, Z. Horita, G. Renou, A. Deschamps, F. De Geuser, Ultrafine grain structure and thermal stability of Al-Fe alloys processed by severe plastic deformation, The 146th TMS Annual Meeting and Exhibition, 2017.02. |
| 93. |
K. Edalati, Influence of severe plastic deformation on Mg-based hydrogen storage materials, I2CNER International Hydrogen Storage Workshop, 2017.02. |
| 94. |
H. Razavi-Khosroshahi, K. Edalati, M. Arita, M. Yamauchi, Z. Horita, M. Fuji, Development of visible-light responsive TiO2 photocatalyst by high-pressure torsion, Annual Meeting of Tokai Branch of the Ceramic Society of Japan, 2016.12. |
| 95. |
K. Edalati, H. Razavi-Khosroshhai, M. Fuji, Z. Horita, Severe plastic deformation of ceramics”, Engineering Mechanics Institute International Conference (EMI), Engineering Mechanics Institute International Conference (EMI), 2016.10. |
| 96. |
M. Arita, T. Nagaoka, Y. Yoshimatsu, R. Haraguchi, K. Edalati, Z. Horita, Phase transformation and electrical resistivity of titanium and zirconium disks processed by processed by high-pressure torsion, Engineering Mechanics Institute International Conference (EMI), 2016.10. |
| 97. |
A. Duchaussoy, X. Sauvage, K. Edalati, Z. Horita, G. Renou, A. Deschamps, F. De Geuser, Ultrafine grain structure and thermal stability of Al-Fe alloys processed by severe plastic deformation, Engineering Mechanics Institute International Conference (EMI), 2016.10. |
| 98. |
R. Kirchheim, C. Borchers, M. Tiegel, Z. Horita, K. Edalati, Compacting nanocrystalline iron-alloy powders by high pressure torsion and spark plasma sintering, Materials Science & Technology (MS&T16), 2016.10. |
| 99. |
H. Razavi-Khosroshahi, K. Edalati, M. Hirayama, H. Emami, M. Arita, M. Yamauchi, H. Hagiwara, S. Ida, T. Ishihara, E. Akiba, Z. Horita, M. Fuji, Nanocrystalline high-pressure titanium dioxide phase for hydrogen generation under visible light, EMN Meeting on Nanocrystals, 2016.10. |
| 100. |
H. Razavi-Khosroshahi, K. Edalati, H. Emami, E. Akiba, Z. Horita, M. Fuji, Optical properties of monoclinic yttria stabilized by grain size effect, The 30th Annual Fall Meeting of the Ceramic Society of Japan, 2016.09. |
| 101. |
K. Edalati, R. Uehiro, Y. Ikeda, H.W. Li, H. Emami, M. Arita, I. Tanaka, E. Akiba, Z. Horita, Development of new Mg-based hydrogen storage materials by binding-energy engineering, The 159th JIM Annual Fall Meeting, 2016.09. |
| 102. |
R. Haraguchi, K. Watanabe, T. Masuda, Y. Takizawa, M. Yumoto, Y. Otagiri, K. Edalati, M. Arita, Z. Horita, Phase transformations in pure titanium and zirconium after HPS processing, The 159th JIM Annual Fall Meeting, 2016.09. |
| 103. |
Y. Kumano, Y. Ikoma, Z. Horita, K. Edalati, K. Saito, Q. Guo, Impact of low-temperature HPT on formation of metastable phases in germanium, The 159th JIM Annual Fall Meeting, 2016.09. |
| 104. |
K. Shibayama, K. Tsuruta, M. Mito, Y. Tajiri, K. Edalati, Z. Horita,, Study on effect of strain in HPT-processed silver by non-contact electrical conductivity measurement, The 159th JIM Annual Fall Meeting, 2016.09. |
| 105. |
K. Ogata, R. Shiraishi, Y. Kitamura, M. Mito, T. Nishizaki, K. Edalati, Z. Horita, Effect of hydrostatic pressure on superconductive transition in niobium processed by severe plastic deformation, The 159th JIM Annual Fall Meeting, 2016.09. |
| 106. |
T. Nishizaki, K. Edalati, Z. Horita, T. Akune, N. Sakamoto, T. Nojima, S. Iguchi, T. Sasaki, Superconducting properties in magnetic fields of NbTi alloy prepared by high-pressure torsion, Annual Spring Meeting of the Physical Society of Japan, 2016.09. |
| 107. |
S. Terada, T. Nishizaki, K. Edalati, S. Lee, Z. Horita, T. Akune, N. Sakamoto, T. Nojima, S. Iguchi, T. Sasaki, Vortex pinning properties in ultrafine-grained vanadium, Annual Spring Meeting of the Physical Society of Japan, 2016.09. |
| 108. |
Y. Matsuzaki, T. Nishizaki, K. Edalati, S. Lee, Z. Horita, T. Akune, N. Sakamoto, T. Nojima, S. Iguchi, T. Sasaki, Superconducting properties in bulk nanostructured tantalum, Annual Spring Meeting of the Physical Society of Japan, 2016.09. |
| 109. |
K. Edalati, H. Emami, Y. Ikeda, H. Iwaoka, I. Tanaka, E. Akiba, Z. Horita,, Hydrogen storage performance of Mg-Zr phases synthesized by high-pressure torsion (HPT), The 15th International Symposium on Metal-Hydrogen Systems (MH2016), 2016.08. |
| 110. |
K. Edalati, M. Matsuo, H. Emami, S. Itano, A. Alhamidi, A. Staykov, D.J. Smith, S. Orimo, E. Akiba, Z. Horita, Hydrogen storage performance of TiFe-based compounds processed by HPT, The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), 2016.08. |
| 111. |
F. Zhang, K. Edalati, M. Arita, Z. Horita, Hydrogen generation behavior of Al-Bi based alloys in pure water after processing by high-pressure torsion, The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), 2016.08. |
| 112. |
K. Edalati, Impact of high-pressure torsion on hydrogen storage materials, The 5th International Workshop on Giant Straining Process for Advanced Materials (GSAM2016), 2016.07. |
| 113. |
H. Razavi-Khosroshahi, K. Edalati, M. Hirayama, H. Emami, M. Arita, M. Yamauchi, H. Hagiwara, S. Ida, T. Ishihara, E. Akiba, Z. Horita, M. Fuji, Photocatalytic hydrogen generation under visible light on nanostructured TiO2-II stabilized by high-pressure torsion, The 5th International Workshop on Giant Straining Process for Advanced Materials (GSAM2016), 2016.07. |
| 114. |
F. Zhang, K. Edalati, M. Arita, Z. Horita, Hydrogen generation behavior of HPT-processed aluminum alloys in water, The 5th International Workshop on Giant Straining Process for Advanced Materials (GSAM2016), 2016.07. |
| 115. |
K. Edalati, Severe plastic deformation and hydrogen storage, KOREATECH Ppuri Root Technology Seminar, 2016.07. |
| 116. |
T. Nishizaki, K. Edalati, Z. Horita, T. Akune, N. Sakamoto, T. Nojima, S. Iguchi, T. Sasaki, Effect of the severe plastic deformation on magnetic properties in superconductors, The 9th International Conference on Processing and Manufacturing of Advanced Materials, Processing, Fabrication, Properties and Applications (THERMEC),, 2016.05. |
| 117. |
D. Nanya, M. Ota, S.K. Vajpai, K. Ameyama, K. Edalati, Z. Horita, Microstructure formation of high pressure torsion processed (α + γ) two phase stainless steel, The 9th International Conference on Processing and Manufacturing of Advanced Materials, Processing, Fabrication, Properties and Applications (THERMEC), 2016.05. |
| 118. |
K. Edalati, H. Emami, E. Akiba, Z. Horita, Formation of new metastable phases and intermetallics in magnesium-based systems by high-pressure torsion, The 9th International Conference on Processing and Manufacturing of Advanced Materials, Processing, Fabrication, Properties and Applications (THERMEC), 2016.05. |
| 119. |
K. Edalati, H. Emami, T. Hongo, J. Matsuda, E. Akiba, Z. Horita, Significance of high-pressure torsion on solid-state hydrogen storage properties, International Conference on New Energy and Sustainable Development (NESD 2016), 2016.03. |
| 120. |
K. Edalati, M. Matsuo, H. Emami, A. Alhamidi, A. Staykov, D.J. Smith, S. Orimo, E. Akiba, Z. Horita, Influence of HPT on hydrogen storage performance of TiFe-Mn compounds, The 158th JIM Annual Spring Meeting, 2016.03. |
| 121. |
R. Uehiro, K. Edalati, H. Emami, H.W. Li, M. Arita, E. Akiba, Z. Horita, Development of new Mg4NiPd hydrogen storage materials using high-pressure torsion method, The 158th JIM Annual Spring Meeting, 2016.03. |
| 122. |
Y. Ikoma, Y. Kumano, K. Edalati, Z. Horita, K. Saito, Q. Guo, Formation of Metastable phases in germanium by HPT processing, The 158th JIM Annual Spring Meeting, 2016.03. |
| 123. |
N. Yagi, M. Kotsugi, T. Ohkochi, K. Edalati, H. Iwaoka, M. Arita, Z. Horita, PEEM analysis on microstructure and magnetic domain of Cu-Fe and Cu-Co alloys processed by HPT, The 158th JIM Annual Spring Meeting, 2016.03. |
| 124. |
M. Ota, D. Minamitani, S.K. Vajpai, K. Ameyama, K. Edalati, Z. Horita, Application of HPT processing to two-phase (α+β) stainless steel powders for thermomechanical treatment, The 158th JIM Annual Spring Meeting, 2016.03. |
| 125. |
T. Nishizaki, K. Edalati, Z. Horita, T. Akune, N. Sakamoto, T. Nojima, S. Iguchi, T. Sasaki, Superconducting properties in magnetic fields of NbTi alloy prepared by high-pressure torsion, The 71th Annual Spring Meeting of the Physical Society of Japan, 2016.03. |
| 126. |
K. Edalati, H. Emami, T. Hongo, J. Matsuda, E. Akiba, Z. Horita, Significance of high-pressure torsion on solid-state hydrogen storage properties, International Conference on New Energy and Sustainable Development (NESD 2016), 2016.03. |
| 127. |
K. Edalati, Z. Horita, High-Pressure torsion from 1935 to 1988, The 9th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2016.02. |
| 128. |
H. Emami, K. Edalati, A. Staykov, T. Hongo, H. Iwaoka, Z. Horita, E. Akiba, High-pressure torsion, a new route for synthesizing Mg-based hydrogen storage compounds: experiments and DFT calculations, International Conference on Small Science, 2015.11. |
| 129. |
K. Edalati, Z. Horita, Phase transformations in nanomaterials severely deformed by high-pressure torsion, The 57th Kyushu Branch Meeting of the Japanese Society of Microscopy, 2015.11. |
| 130. |
Y. Fukushima, K. Edalati, Y. Ikoma, D.J. Smith, Z. Horita, High-resolution observation of nanocrystalline Si processed by high-pressure torsion (HPT), The 57th Kyushu Branch Meeting of the Japanese Society of Microscopy, 2015.11. |
| 131. |
K. Edalati, H. Emami, E. Akiba, Z. Horita, Development of nanostructured Mg-based and Ti-based hydrogen storage materials by high-pressure torsion, The 3rd International Congress on Energy Efficiency and Energy Related Materials (ENEFM2015), 2015.10. |
| 132. |
H. Matsunoshita, K. Edalati, M. Furui, Z. Horita, Potential for superplastic hydroforming of Mg-Li Alloy processed by high-pressure torsion, The 12th International Conference on Superplasticity in Advanced Materials (ICSAM),, 2015.09. |
| 133. |
Y. Fukushima, K. Edalati, Y. Ikoma, Z. Horita, D.J. Smith,, High-resolution observation of HPT-processed nanocrystalline silicon, The 157th JIM Annual Fall Meeting, 2015.09. |
| 134. |
K. Tashiro, M. Mizuguchi, H. Suzuki, S. Lee, K. Edalati, Z. Horita, T. Wada, H. Kato, Production of bulk FeNi ordered alloy by severe plastic deformation, 2015.09. |
| 135. |
K. Edalati, Z. Horita, Grain size effect on phase transformations in high-pressure torsion, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2015), 2015.09. |
| 136. |
K. Edalati, High-pressure torsion from Bridgman to Valiev, The 4th International Workshop on Giant Straining Process for Advanced Materials (GSAM2015), 2015.09. |
| 137. |
H. Emami, K. Edalati, A. Staykov, Z. Horita, E. Akiba, Development of Mg-based hydrogen storage materials by HPT: experiments and first-principles calculations, The 4th International Workshop on Giant Straining Process for Advanced Materials (GSAM2015), 2015.09. |
| 138. |
F. Zhang, K. Edalati, M. Arita, Z. Horita, Hydrogen generation behavior of HPT processed Al-Sn-Zn alloy in water, The 4th International Workshop on Giant Straining Process for Advanced Materials (GSAM2015), 2015.09. |
| 139. |
Y. Fukushima, K. Edalati, Y. Ikoma, D.J. Smith, Z. Horita, Observation of HPT-processed nanocrystalline silicon, The 4th International Workshop on Giant Straining Process for Advanced Materials (GSAM2015), 2015.09. |
| 140. |
K. Edalati, H. Emami, A. Staykov, D.J. Smith, E. Akiba, Z. Horita, Potential of metastable Mg-Ti phases produced by HPT for hydrogen storage, 2015.08. |
| 141. |
K. Edalati, J.M. Cubero-Sesin, A. Alhamidi, I.F. Mohamed, Z. Horita, Nanograin formation and self-annealing by high-pressure torsion in liquid nitrogen, The 24th International Materials Research Congress (IMRC), 2015.08. |
| 142. |
F. Zhang, K. Edalati, M. Arita, Z. Horit, Developing aluminum alloys for hydrogen generation in water using high-pressure torsion, The 24th International Materials Research Congress (IMRC), 2015.08. |
| 143. |
Y. Fukushima, K. Edalati, Y. Ikoma, Z. Horita, D.J. Smith, High resolution TEM observation of nanocrystalline silicon fabricated by high pressure torsion (HPT), Microscopy & Microanalysis Meeting (M&M 2015), 2015.08. |
| 144. |
A. Alhamidi, K. Edalati, Z. Horita, Influence of high-pressure torsion on formation/destruction of nano-sized spinodal structures, The 14th International conference on Quality in Research (QiR), 2015.08. |
| 145. |
K. Edalati, Z. Horita,, Significance of severe plastic strain and grain size on phase transformation and hydrogen storage, Energy Materials Nanotechnology (EMN 2015), 2015.07. |
| 146. |
K. Edalati, H. Emami, A. Staykov, D.J. Smith, E. Akiba, Z. Horita, Production of Mg-Ti alloys by HPT for hydrogen storage, JIM Annual Kyushu Local Meeting, 2015.06. |
| 147. |
K. Edalati, H. Emami, A. Staykov, T. Hongo, H. Iwaoka, E. Akiba, Z. Horita, Development of Mg-based hydrogen storage materials using high-pressure torsion, The 156th JIM Annual Spring Meeting, 2015.03. |
| 148. |
F. Zhang, K. Edalati, M. Arita, Z. Horita, Hydrogen production from hydrolysis of aluminum alloy processed by high-pressure torsion, The 156th JIM Annual Spring Meeting, 2015.03. |
| 149. |
T. Nishizaki, S. Lee, K. Edalati, Z. Horita, T. Akune, N. Sakamoto, T. Nojima, S. Iguchi, T. Sasaki, N. Kobayashi, Critical Temperature and Vortex State in Bulk Nanostructured Nb, The 70th Annual Spring Meeting of the Physical Society of Japan, 2015.03. |
| 150. |
K. Edalati, J. Matsuda, A. Yanagida, E. Akiba, Z. Horita, Hydrogen storage in TiFe plastically deformed by groove rolling and high-pressure torsion, The International Conference on Hydrogen Embrittlement and Applications (Hy-SEA 2014), 2014.10. |
| 151. |
T. Hongo, K. Edalati, M. Arita, J. Matsuda, E. Akiba, Z. Horita, Hydrogenation properties of HPT-processed Mg2Ni, Meeting on Application and Development of Next Generation Hydrides, 2014.10. |
| 152. |
K. Edalati, Softening by severe plastic deformation and hardening by annealing of Al-30mol%Zn alloy, The 3rd International Workshop on Giant Straining Process for Advanced Materials (GSAM2014), 2014.09. |
| 153. |
K. Edalati, J. Matsuda, A. Yanagida, E. Akiba, Z. Horita, Improvement of hydrogen storage in TiFe by groove rolling and HPT, The 155th JIM Annual Fall Meeting, 2014.09. |
| 154. |
T. Hongo, K. Edalati, M. Arita, J. Matsuda, E. Akiba, Z. Horita, Hydrogenation behavior of Mg2Ni subjected to HPT process, The 155th JIM Annual Fall Meeting, 2014.09. |
| 155. |
Y. Yoshimitsu, T. Nagaoka, K. Edalati, M. Arita, Z. Horita, Electrical resistance distribution associated with the phase transformation in Ti processed by high-pressure torsion, The 155th JIM Annual Fall Meeting, 2014.09. |
| 156. |
S. Hata, S. Junya, K. Ikeda, E. Nakashima, K. Edalati, Z. Horita, T. Furuta, K. Horifushi, S. Kuramoto, Crystalline phase and orientation mapping of lattice-softened Fe-Ni-Co-Ti alloy subjected to severe deformation, The 155th JIM Annual Fall Meeting, 2014.09. |
| 157. |
K. Edalati, J. Matsuda, E. Akiba, Z. Horita, Effect of high-pressure torsion on hydrogen storage properties of TiFe, The 15th IUMRS International Conference in Asia (IUMRS-ICA 2014), 2014.08. |
| 158. |
K. Edalati, J. Matsuda, M. Arita, T. Daio, H. Iwaoka, S. Toh, E. Akiba, Z. Horita, Hydrogen storage in nanostructured TiFe processed by high-pressure torsion, The 14th International Symposium on Metal-Hydrogen Systems (MH2014), 2014.07. |
| 159. |
E. Akiba, J. Matsuda, Y. Horita, K. Edalati, Z. Horita, Improvement of activation and re-hydrogenation behaviors of TiFe, The 14th International Symposium on Metal-Hydrogen Systems (MH2014), 2014.07. |
| 160. |
K. Edalati, Z. Horita, Phase transformations during high-pressure torsion (HPT) in titanium, cobalt and graphite, The 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD6), 2014.06. |
| 161. |
Y. Yoshimatsu, T. Nagaoka, K. Edalati, M. Arita, Z. Horita, Observation of electrical resistivity distribution of titanium with phase transformation, JIM Annual Kyushu Local Meeting, 2014.06. |
| 162. |
K. Edalati, D. Akama, A. Nishio, S. Lee1, Y. Yonenaga, Z. Horita, Influence of solute atoms and stacking fault energy on grain size of binary alloys processed by high-pressure torsion, The 154th JIM Annual Spring Meeting, 2014.03. |
| 163. |
K. Edalati, T. Daio, Y. Ikoma, M. Arita, Z. Horita, Graphite to Diamond Phase Transformation by High-Pressure Torsion, The 8th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2014.02. |
| 164. |
Y. Ikoma, K. Hayano, K. Edalati, K. Saito, Q. Guo, Z. Horita, Formation of metastable phases of silicon processed by high-pressure torsion, The 8th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2014.02. |
| 165. |
T. Nishizaki, S. Lee, K. Edalati, Z. Horita, T. Akune, N. Sakamoto, S. Iguchi, T. Sasaki, Superconductivity in bulk ultrafine-grained metals prepared by high-pressure torsion, The 8th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2014.02. |
| 166. |
K. Edalati, J. Matsuda, M. Arita, T. Daio, H. Iwaoka, S. Toh, E. Akiba, Z. Horita, Application of high-pressure torsion to TiFe hydrogen storage material: No requirement for activation, The 8th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2014.02. |
| 167. |
S. Lee, K. Edalati, H. Iwaoka, Z. Horita, T. Ohtsuki, T. Ohkochi, M. Kotsugi, T. Kojima, M. Mizuguchi, K. Takanashi, Fabrication of L10-ordered FeNi using high-pressure torsion and annealing, The 8th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2014.02. |
| 168. |
K. Edalati, J. Matsuda, E. Akiba, Z. Horita, High-pressure torsion (HPT) effect on hydrogen storage properties, I2CNER International Hydrogen Storage Workshop, 2014.01. |
| 169. |
[100] K. Edalati, Activation of TiFe for hydrogen storage at room temperature using high-pressure torsion, I2CNER International Hydrogen Storage Workshop, 2014.01. |
| 170. |
K. Edalati, T. Daio, Y. Ikoma, M. Arita, Z. Horita, Direct formation of diamond-like carbon from graphite by high-pressure torsion, International Conference on Diamond and Carbon Materials, 2013.09. |
| 171. |
K. Edalati, T. Daio, Y. Ikoma, M. Arita, Z. Horita, Diamond to graphite transition by high-pressure torsion, The 153th JIM Annual Fall Meetin, 2013.09. |
| 172. |
K. Hayano, K. Edalati, Y. Ikoma, Z. Horita, K. Saito, Q. Guo, Production of bulk nanostructured Si using HPT, The 153th JIM Annual Fall Meeting, 2013.09. |
| 173. |
Y. Ikoma, K. Hayano, K. Edalati, Z. Horita, K. Saito, Q. Guo, Microstructure of Si processed by HPT, The 153th JIM Annual Fall Meeting, 2013.09. |
| 174. |
T. Furuta, S. Kuramoto, K. Edalati, Z. Horita, Balance of strength and ductility in nanograined Fe-Ni-Al-C alloys, The 153th JIM Annual Fall Meeting, 2013.09. |
| 175. |
K. Edalati, J. Matsuda, H. Iwaoka, S. Toh, E. Akiba, Z. Horita, Activation of TiFe intermetallics for hydrogen storage using high-pressure torsion, The 8th Pacific Rim International Conference on Advanced Materials and Processing (PRICM8), 2013.08. |
| 176. |
Y. Ikoma, K. Hayano, K. Edalati, K. Saito, Q. Guo, Z. Horita, Production of nanograined silicon using high-pressure torsion, The 8th Pacific Rim International Conference on Advanced Materials and Processing (PRICM8), 2013.08. |
| 177. |
K. Edalati, Z. Horita, High strength and high ductility in nanostructured aluminum-base intermetallics produced by high-pressure torsion, The 6th International Light Metal Technology Conference (LMT-2013), 2013.07. |
| 178. |
A. Alhamidi, K. Edalati, Z. Horita, Formation of bulk nanostructured Al3Ni from elemental micropowders using high-pressure torsion, The 6th International Light Metal Technology Conference (LMT-2013), 2013.07. |
| 179. |
K. Edalati, J. Matsuda, H. Iwaoka, S. Toh, E. Akiba, Z. Horita, Hydrogen storage in nanostructured TiFe processed by HPT, The 152th JIM Annual Spring Meeting, 2013.03. |
| 180. |
K. Edalati, Z. Horita, High strength and high plasticity in nanostructured intermetallics produced by high-pressure torsion, The 5th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials (ISAEM-2012), 2012.11. |
| 181. |
K. Edalati, A. Alhamidi, Z. Horita, Production of nanograined intermetallics using high-pressure torsion, The 5th Latin American Conference on Metastable and Nanostructured Materials (NANOMAT 2012), 2012.09. |
| 182. |
K. Edalati, S. Toh, H. Iwaoka, Z. Horita, Tungsten-base nanocomposites by high-pressure torsion, The 151th JIM Annual Fall Meeting, 2012.09. |
| 183. |
A. Alhamidi, H. Iwaoka, K. Edalati, Z. Horita, Effect of temperature on the formation Al3Ni intermetallics of HPT-processed Al-Ni powders, The 151th JIM Annual Fall Meeting, 2012.09. |
| 184. |
K. Hayano, Y. Ikoma, K. Edalati, Z. Horita, K. Saito, Q. Guo, Characterization of bulk nanostructured Si, The 151th JIM Annual Fall Meeting, 2012.09. |
| 185. |
K. Edalati, S. Toh, H. Iwaoka, Z. Horita, Production of W-base nanocomposites by high-pressure torsion, International Workshop on Bulk Nanostructured Metals, 2012.06. |
| 186. |
A. Alhamidi, H. Iwaoka, K. Edalati, Z. Horita, Production of nanograined Al3Ni from elemental micro-powders, International Workshop on Bulk Nanostructured Metals, 2012.06. |
| 187. |
Y. Ikoma, K. Hayano, K. Edalati, Z. Horita, K. Saito, Q. Guo, Bulk nanostructured silicon produced by high-pressure torsion, International Workshop on Bulk Nanostructured Metals, 2012.06. |
| 188. |
K. Edalati, Z. Horita, Production of Al-based nano-intermetallics by high-pressure torsion, The 13th International Conference on Aluminum Alloys, 2012.06. |
| 189. |
K. Edalati, T. Masuda, M. Arita, M. Furui, X. Sauvage, Z. Horita, R.Z. Valiev, Room-temperature superplasticity in an Mg alloy”, The 134th JILM Annual Meeting, 2012.05. |
| 190. |
K. Edalati, S. Toh, H. Iwaoka, M. Watanabe, Z. Horita, D. Kashioka, K. Kishida, H. Inui, Exceptional mechanical properties of nanostructured intermetallics produced by HPT, The 122th JILM Annual Meeting, 2012.05. |
| 191. |
A. Alhamidi, H. Iwaoka, K. Edalati, Z. Horita, Solid state reaction of Al-Ni nanostructured intermetallics using high-pressure torsion, The 122th JILM Annual Meeting, 2012.05. |
| 192. |
K. Edalati, A. Yamamoto Z. Horita, T. Ishihara, Improvement of hydrogen storage capacity by plastic deformation using high-pressure torsion, The 2nd Asian Symposium on Hydrogen Storage Materials (AHSM2012), 2012.04. |
| 193. |
K. Edalati, Z. Horita, Application of high-pressure torsion to ceramic-based materials, The 7th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2012.03. |
| 194. |
T. Furuta, S. Kuramoto, K. Edalati, Z. Horita, Effect of alloy composition on mechanical properties of bulk nanostructured Fe-Ni-Co-Ti alloys produced by high-pressure torsion, The 7th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2012.03. |
| 195. |
K. Edalati, S. Toh, T. Furuta, S. Kuramoto, M. Watanabe, Z. Horita, Ultrahigh strength and high ductility in nano-twinned nano-grained Fe-Ni-Co-Ti alloys, The 150th ISIJ-JIM Annual Spring Meeting, 2012.03. |
| 196. |
K. Edalati, S. Toh, Z. Horita, Production of Al-Ti nanostructured intermetallics and nanocomposites by high-pressure torsion, The 121th JILM Annual Meeting, 2011.11. |
| 197. |
Z. Horita, K. Edalati, Fabrication of bulk nanostructured metals by giant plastic deformation, The 149th ISIJ-JIM Annual Fall Meeting, 2011.11. |
| 198. |
Y. Ikoma, K. Hayano, K. Edalati, Z. Horita, Q. Guo, Phase transformations in Si by HPT processing, The 149th ISIJ-JIM Annual Fall Meeting, 2011.11. |
| 199. |
K. Edalati, S. Toh, Y. Ikoma, Z. Horita, Nanograins formation and allotropic phase transformations in ceramics severely deformed by high-pressure torsion, The 149th ISIJ-JIM Annual Fall Meeting, 2011.11. |
| 200. |
K. Edalati, Z. Horita, Production of bulk nanostructured materials with exceptional properties by high-pressure torsion at Kyushu University, The 4th International Nanotechnology Festival (Iran Nano 2011, 2011.10. |
| 201. |
K. Edalati, R. Miresmaeili, Z. Horita, H. Kanayama, R. Pippan, Estimation of temperature raise during high-pressure torsion by finite element simulation, The 55th Annual Japan Congress on Materials Research, 2011.10. |
| 202. |
K. Edalati, Z. Horit, Development of continuous high-pressure torsion, Research Meeting on Bulk Nanostructured Metals, 2011.09. |
| 203. |
K. Edalati, Z. Horita, Processing strip and wire specimens by continuous high-pressure torsion, The 3rd International Symposium on Bulk Nanostructured Materials (BNM), 2011.08. |
| 204. |
M. Watanabe, J. Cubero, K. Edalati, Z. Horita, Development of rotation dark-field imaging for mapping secondary-phase distributions in nano-scal, Microscopy and Microanalysis Meeting, 2011.08. |
| 205. |
K. Edalati, Z. Horita, Parameters influencing steady-state grain size of pure metals processed by high-pressure torsion, The 7th International Conference on Processing and Manufacturing of Advanced Materials, Processing, Fabrication, Properties and Applications (THERMEC), 2011.08. |
| 206. |
A. Alhamidi, H. Iwaoka, K. Edalati, Z. Horita, Bulk nanostructured Al3Ni intermetallic through consolidation of elemental micro-powders using high-pressure torsion, ISIJ-JIM Annual Kyushu Local Meeting, 2011.06. |
| 207. |
K. Edalati, R. Miresmaeili, Z. Horita, H. Kanayama, R. Pippan, Extent of temperature increase during high-pressure torsion, ISIJ-JIM Annual Kyushu Local Meeting, 2011.06. |
| 208. |
K. Edalati, Z. Horita, Correlation of physical parameters with steady-state hardness of pure metals processed by high-Pressure torsion, The 5th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD5), 2011.03. |
| 209. |
T. Furuta, S. Kuramoto, K. Edalati, S. Toh, Z. Horita, Grain refinement of nano-structured Fe-Ni-Co-Ti alloys produced by high pressure torsion, The 5th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD5), 2011.03. |
| 210. |
K. Edalati, A. Yamamoto Z. Horita, T. Ishihara, Improvement of hydrogen storage capacity and mechanical properties in pure magnesium by high-pressure torsion, The 120th JILM Annual Meeting, 2011.05. |
| 211. |
K. Edalati, S. Toh, Z. Horita, In situ fabrication of bulk nanograin-structured Ni-Ti-Al composites by high-pressure torsion, The 148th ISIJ-JIM Annual Spring Meeting, 2011.05. |
| 212. |
K. Edalati, Z. Horita, Ultrahigh-strength nano-grained composites produced by high-pressure torsion, TMS Annual Meeting and Exhibition, 2011.02. |
| 213. |
T. Furuta, S. Kuramoto, K. Edalati, Z. Horita, Microstructural characterization and deformation behavior of ideal strength metallic materials, TMS Annual Meeting and Exhibition, 2011.02. |
| 214. |
K. Edalati, Z. Horita, A. Yamamoto, T. Ishihara, Evolution of mechanical properties, microstructures and hydrogen storage capability in pure magnesium processed by high-pressure torsion, The 2nd International Symposium on Giant Straining Process for Advanced Materials (GSAM), 2010.11. |
| 215. |
K. Edalati, Z. Horita, Processing aluminum and aluminum alloys by continuous high-pressure torsion, The 12th International Conference on Aluminum Alloys, 2010.09. |
| 216. |
K. Edalati, Z. Horita, Fabrication of Ti-based composites by high-pressure torsion, The 119th JILM Annual Meeting, 2010.11. |
| 217. |
K. Edalati, S. Toh, Z. Horita, T. Furuta, S. Kuramoto, Nanograin-structured Fe-Ni-Co-Ti alloys produced by HPT, The 147th ISIJ-JIM Annual Fall Meeting, 2010.09. |
| 218. |
T. Furuta, S. Kuramoto, K. Edalati, Z. Horita, Strengthening mechanism in nano-crystallized Fe-Ni-Co-Ti alloys, The 147th ISIJ-JIM Annual Fall Meeting, 2010.09. |
| 219. |
K. Edalati, Z. Horita, H. Fujiwara, K. Ameyama, M. Tanaka, K. Higashida, High strength and ductility in ball-milled titanium powders consolidated by high-pressure torsion, The 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM7), 2010.08. |
| 220. |
K. Edalati, Z. Horita, Continuous high-pressure torsion, The 6th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2010.02. |
| 221. |
K. Edalati, Z. Horita, Compaction of ceramic powders by high-pressure torsion, ISIJ-JIM Annual Kyushu Local Meeting, 2010.06. |
| 222. |
S. Kuramoto, K. Mabuchi, T. Furuta, K. Edalati, Z. Horita, Nanocrystallization in HPT-processed Fe-Ni-Co-Ti alloy, The 146th ISIJ-JIM Annual Spring Meeting, 2010.03. |
| 223. |
S. Lee, K. Edalati, Z. Horita, Microstructure and mechanical properties of pure Cr and Nb processed by high-pressure torsion, The 146th ISIJ-JIM Annual Spring Meeting, 2010.03. |
| 224. |
K. Edalati, Z. Horita, Strain-induced hydride formation in hafnium by application of high-pressure torsion, The 146th ISIJ-JIM Annual Spring Meeting, 2010.03. |
| 225. |
K. Edalati, Z. Horita, High pressure torsion of pure metals for universal plot, The 6th International Symposium on Ultrafine-Grained Materials, TMS Annual Meeting and Exhibition, 2010.02. |
| 226. |
K. Edalati, Z. Horita, Processing pure iron under different modes of severe plastic deformation, The 2nd International Symposium on Steel Science (ISSS), 2009.10. |
| 227. |
R. Tejedor, K. Edalati J. A. Benito, J. M. Cabrera, Z. Horita, Role of impurities in steels processed by high pressure torsion, The 2nd International Symposium on Bulk Nanostructured Materials from Fundamentals to Innovations (BNM), 2009.09. |
| 228. |
S. Lee, K. Edalati, Z. Horita, Microstructures and mechanical properties of pure V and Mo processed by high pressure torsion, The 145th JIM Annual Fall Meeting, 2009.09. |
| 229. |
K. Edalati, Z. Horita, H. Fujiwara, K. Ameyama, Consolidation of ball-milled Ti powder by application of HPT, The 145th JIM Annual Fall Meeting, 2009.09. |
| 230. |
K. Edalati, Z. Horita, M. Tanaka, K. Higashida, High pressure torsion of pure Ti: Effect of pressure and strain on allotropy, The 6th International Conference on Processing and Manufacturing of Advanced Materials, Processing, Fabrication, Properties and Applications (THERMEC), 2009.08. |
| 231. |
K. Edalati, Y. Ito, K. Suehiro, Z. Horita, Softening behavior of Al and Cu during or after HPT, The 1st International Symposium on Giant Straining Process for Advanced Materials (GSAM), 2008.11. |
| 232. |
Y. Ito, Y. Harai, T. Fujioka, K. Edalati, Z. Horita, Use of ring sample for high-pressure torsion and microstructural evolution with equivalent strain, The 4th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD4), 2008.08. |
| 233. |
S. Lee, K. Edalati, Z. Horita, Microstructure and mechanical properties of pure V and Mo processed by high pressure torsion, The ISIJ-JIM Annual Kyushu Local Meeting, 2009.06. |
| 234. |
K. Edalati, Z. Horita, HPT processing of pure metals, ISIJ-JIM Annual Kyushu Local Meeting, 2009.06. |
| 235. |
K. Edalati, Z. Horita, S. Yagi, E. Matsubara, Application of high pressure torsion to high purity zirconium, The 144th ISIJ-JIM Annual Spring Meeting, 2009.03. |
| 236. |
K. Edalati, Z. Horita, E. Matsubara, Microstructure and mechanical properties of HPT-processed Ti, The 115th JILM Annual Meeting, 2008.11. |
| 237. |
K. Edalati, T. Fujioka, Z. Horita, The effect of strain and pressure on the mechanical properties of HPT-processed Cu and Fe using disc and ring specimen, The 143th ISIJ-JIM Annual Fall Meeting, 2008.09. |
| 238. |
K. Edalati, T. Fujioka, Z. Horita, Evolution of microstructure and mechanical properties of Cu and Fe through application of high-pressure torsion, ISIJ-JIM Annual Kyushu Local Meeting, 2008.06. |
| 239. |
K. Edalati, T. Fujioka, Z. Horita, Application of HPT to Cu and Fe using disc and ring specimens, The 142th ISIJ-JIM Annual Spring Meeting, 2008.03. |
